Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Towing Equipment and Trailer Brake System Supplier

Active

Federal

Response Deadline08/04/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a supplier to provide and integrate a factory-installed Class III or IV towing package, which must include a 7-pin wiring harness and a trailer brake controller, ensuring full compatibility and seamless operation with the target vehicle platform. The equipment must be installed at the manufacturing level and meet all performance, safety, and technical standards required for military-grade towing applications. The work is subject to strict integration protocols to guarantee reliability under operational conditions, with all components fully certified and documented for compliance. This opportunity is a total small business set-aside under NAICS code 336340, restricted to small business concerns as defined by the SBA, and is part of a Department of Defense effort managed by FA4830 23 Cons Cc. The place of performance is identified as Fort Moore, Georgia, with a submission deadline of August 4, 2026, at 6:00 PM Eastern Time. The solicitation is posted on SAM.gov and requires proposers to demonstrate technical capability, production capacity, and experience in supplying similar towing systems for defense or heavy-duty commercial applications. All responses must adhere to federal acquisition requirements and include documentation of small business eligibility.

General Info

Small business set-aside for factory-installed military towing package with brake controller and 7-pin harness at Fort Moore, Georgia.

Agency

Department Of Defense → FA4830 23 Cons CcView Agency

NAICS

336340 - Motor Vehicle Brake System ManufacturingView NAICS

Place of Performance

Fort Moore, GA, 31699, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 06:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4830 23 Cons Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4830 23 Cons Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide and integrate a factory-installed Class III/IV towing package including 7-pin wiring harness and trailer brake controller.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of Vehicular Splash GuardsThe contract entails the full lifecycle production and delivery of vehicular splash guards identified by NSN 2540015030413, covering all stages from material acquisition and fabrication to final quality assurance, packaging, labeling, and shipment to destinations within the continental United States. Execution must adhere strictly to delivery orders issued under the terms of this agreement, ensuring timely and compliant fulfillment of military requirements. The work is classified under NAICS code 336340, which pertains to motor vehicle parts manufacturing, and is subject to a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. This subcontract opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. While no specific point of contact or performance location details are provided, the contractual obligations center on manufacturing excellence and supply chain reliability to support defense operations. All proposers must demonstrate capacity to meet stringent defense quality standards and operational timelines through a fully integrated production and logistics process. The solicitation is accessible via the DIBBS platform under reference number SPE7LX26U8634.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Vehicular Window Supply and DeliveryThe contract requires the supply and delivery of approximately seven units of vehicular windows identified by NSN 2510012941846 to DLA DIRECT locations within the continental United States. All items must fully comply with military packaging and labeling standards, as well as federal regulations governing the handling and transportation of hazardous materials, ensuring safe and authorized delivery to government facilities. The work is classified as a subcontract under NAICS code 336340, which corresponds to automotive body and trailer manufacturing, indicating the specialized nature of the components involved. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Although no specific point of contact or physical delivery address is provided, the performance location is restricted to CONUS destinations, implying that all units must be shipped to designated military logistics nodes or installations within the contiguous United States. The contract is not subject to any set-aside designation, making it open to all qualified contractors, and the official solicitation details can be accessed through the DIBBS platform using the provided link.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Assembly, Testing, and CertificationThe contract requires the final assembly, functional testing, and certification of brake and steer sections to meet strict defense standards, encompassing precise torque application, performance verification, and comprehensive documentation. All work must ensure the components operate reliably under operational conditions and comply with specified military requirements. The scope emphasizes end-to-end manufacturing validation, from physical assembly through rigorous testing protocols to formal certification, ensuring readiness for defense applications. The contract is classified as a subcontract under NAICS code 336340 and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. It was posted on July 23, 2026, with a response deadline of August 24, 2026. No set-aside provisions are specified, and the place of performance details are not provided, but the work is expected to align with federal defense procurement guidelines. Interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Vehicular Splash Guards (NSN 2540011975543)The contract calls for the manufacture, packaging, labeling, and delivery of 197 vehicular splash guards annually, all of which must comply with military specifications and hazardous materials standards. The item is identified by NSN 2540011975543 and falls under the NAICS code 336340, which corresponds to motor vehicle body manufacturing. The solicitation is structured as a subcontract and is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses qualifying under SBA guidelines are eligible to bid. The opportunity was posted on July 23, 2026, with a response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance of the contract is expected to support military vehicle operations, with strict adherence to regulatory and safety requirements for both product quality and hazardous material handling.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Horn, Signal (NSN: 6350123978378)The contract involves the procurement and delivery of one commercial horn, signal unit identified by NSN 6350123978378, requiring full compliance with military and federal specifications for packaging, marking, and hazardous materials handling. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with performance required at FPO ZIP 96693. The solicitation, categorized under NAICS code 336340 for other transportation equipment manufacturing, was posted on July 23, 2026, with responses due by August 3, 2026. All deliverables must meet stringent defense standards to ensure compatibility and safety in military operations, particularly regarding hazardous material protocols and labeling requirements.

Defense Logistics Agency

POSTED

DEADLINE

VALVE, RELAY, AIR PRESSUThe contract is for the procurement of 164 units of a valve, relay, air pressure, identified by NSN 2530013621613 and part number N-4400-D from Halex Brake Products Corporation. The item is classified as a commercial item and a critical application item, subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The contract specifies two delivery lines: 45 units required to ship by January 13, 2027, with delivery due by January 23, 2027, to the DLA Distribution San Joaquin facility in Tracy, California; and 119 units required to ship by February 20, 2027, with the same delivery deadline to the DLA Distribution New Cumberland facility in Pennsylvania. All units must be delivered FOB origin with zero quantity variance, inspected and accepted at destination, and packaged per MIL-STD-2073-1E and DLA packaging requirements. Each unit must be marked in accordance with MIL-STD-129 and include special lead finish labeling per IPC/JEDEC J-STD-609 to identify Pb or Pb-free status. The solicitation number is SPE7L3-26-T-132T, issued under a federal acquisition with a NAICS code of 336340, and was posted on July 23, 2026, with responses due by August 3, 2026. The point of contact is Matthew Curry at the Department of Defense, Land Supplier Operations Vehicle Support.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

ADJUSTER, SLACK, BRAKThe contract solicitation SPE7L3-26-T-128J is for the procurement of 73 units of an Adjuster, Slack, Brakes with NSN 2530-01-479-1964, supplied by Haldex Brake Products Corporation under part number 409-10324. The unit price is $73.00 per piece, with a total contract value of $5,329.00, and delivery is required within 168 days from the contract award date, with a final required delivery date of November 25, 2026, and a need ship date of January 19, 2027. Items must be delivered FOB origin with zero variance in quantity, inspected and accepted at destination, and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous materials must meet TQ requirement IP025 as defined in Fed-Std-313. All packaging and labeling must adhere to MIL-STD-129 with palletization following RP001 DLA packaging guidelines, and the unit of issue is each (EA) with one unit per pack. All supplies must be shipped to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with transportation details governed by DLAD Proc Notes C19 and C20. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and falls under the NAICS code 336340 for automotive brake system manufacturing. The point of contact is Viviane Kounkorgo with the Department of Defense, Land Supplier Operations Vehicle Support, reachable via email or phone. The contract references the DLA Master List of Technical and Quality Requirements, which controls the applicable standards, particularly for solicitations within simplified acquisition thresholds, and all documentation must conform to the version effective on the solicitation issue date unless amended. Government identification must be removed from non-accepted supplies per RQ011.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

BRAKE SHOEThe contract specifies the procurement of 41 brake shoes under NSN 2530-00-846-1830, with acceptance of either new or rebuilt units. Rebuilt brake shoes must comply with Drawing CS 2530-0042, Revision C dated 27 May 1988, and require origin inspection. All items must be completely free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. The brake shoes are subject to DLA Packaging Requirements and technical quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. Delivery is required within 194 days after order placement, with performance located in Tracy, California, 95304-5000. The solicitation, issued under SPE7L3-26-T-126Q on 23 July 2026, closes for responses on 3 August 2026, and falls under NAICS code 336340. Primary point of contact is Matthew Curry via email and phone, representing the Department of Defense’s Land Supplier Operations Vehicle Support unit.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

DISC, BRAKEThis contract, issued under solicitation SPE7L3-26-T-126W, pertains to the procurement of a brake disc identified by NSN 2530-01-108-6300 and part number 8-003-663-01 from REXNORD INDUSTRIES LLC. The requirement calls for three kilotons of the item to be delivered within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with delivery terms set as FOB origin and a strict zero variance in quantity. The item is classified as a critical application and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except under specific exceptions for batteries, lighting, sensors, weapon systems, and certain chemical reagents approved by NAVSEA, with portable devices containing mercury requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-STD-2073-1E, specifically Appendix D for kits, and marking must follow MIL-STD-129 with no special marking codes applied. Packaging must also conform to DLA’s procurement packaging requirements, and palletization must meet specified standards. The item is to be inspected at the destination, and shipment must comply with hazardous materials protocols outlined in IP025 and DLAD Proc Notes C19 and C20. The original delivery date was November 16, 2026, with a revised ship date of January 19, 2027, and the contract was posted on July 23, 2026, with responses due by August 3, 2026. The contracting activity falls under the Department of Defense’s Land Supplier Ops Vehicle Support, with Matthew Curry listed as the primary point of contact. The NAICS code is 336340, indicating classification within the motor vehicle brake system manufacturing industry.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

VALVE, PROTECTING, MULTIThe contract is for the procurement of 177 units of a valve, protecting, multi circuit air brake with NSN 2530-01-360-4446 under solicitation SPE7L1-26-U-0494, issued as a total small business set-aside under NAICS code 336340. The item is restricted source and requires government engineering source approval through the design control activity. Compliance with DLA packaging requirements and incorporation of technical and quality standards from the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date. Offerors must submit comprehensive documentation including all manufacturing drawings and specifications, detailed process and operation sheets with inspection criteria, identification of critical process suppliers including forgings and castings, purchase orders if available, and a shock extension report aligned with MIL-S-901 and DI-ENVR-80706. If original OEM drawings are unavailable, an engineering analysis report must be provided detailing the development methodology, and if reverse engineering is employed, a full procedural account must be submitted including sample count, measurement techniques, all collected data, and justification for dimensional deviations and acceptance criteria, all to be reviewed by the engineering support activity. Delivery is required within 75 days after delivery order, and the point of contact for post-award matters is Dov Sneward at DLA Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

DEADLINE

STEER SECTION AND BRAKE ASSEMBLYThe contract pertains to the procurement of a steering section and brake assembly for the right side, identified by NSN 2530-00-008-3727, with a quantity of 14 units required. Manufacturing may involve casting or forging processes, necessitating specialized tooling that the government likely does not possess, requiring potential vendors to seek assistance through the Department of Defense's Casting and Forging Assistance Request portal or designated email for guidance on tooling, materials, or production capabilities. The solicitation, issued under number SPE7L1-26-R-0104 by the Land Supply Chain division of the Department of Defense, has a response deadline of August 24, 2026, with delivery scheduled 308 days after award. Vendors must be certified by a Cybersecurity Maturity Model Certification Level 2 accredited third-party assessment organization to be eligible. The procurement is a federal solicitation with no set-aside designation, and performance is expected within the United States under the oversight of the Department of Defense.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Transit Vehicle Air Dryer UnitsDallas Area Rapid Transit is seeking subcontractors to supply and deliver Haldex TDM-type air dryer units designed for use in transit vehicle braking systems. The contract is classified under NAICS code 336340 which pertains to motor vehicle parts manufacturing, indicating the need for specialized automotive component expertise. The solicitation was posted on July 23, 2026, with a strict response deadline of July 28, 2026, at 7:00 PM, leaving a limited five-day window for submissions. Performance of the work is expected to occur in Texas, though no specific city or zip code is provided. The contract does not specify a set-aside classification, suggesting it is open to all qualified vendors without preference based on size, ownership, or other socio-economic factors. All proposals must align with the technical specifications of the Haldex TDM air dryer units to ensure compatibility with existing DART transit fleet braking systems.

Dallas Area Rapid Transit

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4830 23 Cons Cc

Same awarding agency

Warranty Administration and Service Network SupportThis contract establishes a 3-year or 36,000-mile bumper-to-bumper warranty and a 5-year or 60,000-mile powertrain warranty, covering all necessary service and replacement parts to ensure comprehensive vehicle protection. The scope includes full warranty administration and robust service network support to maintain consistent, high-quality customer service across the designated coverage period and mileage limits. The effort is structured as a subcontract under a Total Small Business Set-Aside, with the North American Industry Classification System code 811111 indicating automotive repair and maintenance as the primary function. Performance is centered at Fort Moore, Georgia, where the contractor will be expected to fulfill all warranty obligations and coordinate with local service centers to ensure timely and effective resolution of claims. The subcontract is being solicited by the Department of Defense under agency FA4830 23 Cons Cc, with a response deadline of August 4, 2026, and is positioned to support military vehicle maintenance operations through a designated small business partner.

General Automotive Repair

POSTED

DEADLINE

Vehicle Delivery and Logistics (FOB Destination)The contract involves the transport of a completed bus to Moody Air Force Base in Georgia under FOB Destination terms, meaning delivery and associated responsibilities, including risk and cost, transfer to the government only upon arrival at the destination. The contractor must coordinate all logistics to ensure safe and timely delivery while securing necessary access permissions for entry onto the military installation, which requires strict compliance with base regulations and procedures. This is a small business set-aside subcontract under NAICS code 484220, exclusively available to small businesses, as defined by the SBA, with the opportunity posted on July 24, 2026, and responses due by August 4, 2026, with performance located at Fort Moore, Georgia, 31699.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

OEM Documentation and Digital Manual PreparationThe contract titled OEM Documentation and Digital Manual Preparation is a small business set-aside subcontract under NAICS code 541430, issued by the Department of Defense through the FA4830 23 Cons Cc office. It requires the production of comprehensive original equipment manufacturer operation and maintenance manuals in both printed form and digital formats including PDF and USB delivery. The work is to be performed at Fort Moore, Georgia, with a response deadline of August 4, 2026, and the opportunity was posted on July 24, 2026. All eligible bidders must be small businesses as defined by the Small Business Administration, with the set-aside reserved exclusively for total small business participation under FAR 19.5. The contract emphasizes the need for accurate, technically precise documentation that meets industry standards for usability and compliance across both physical and electronic media.

Graphic Design Services

POSTED

DEADLINE

Emergency Exit and Safety Systems Compliance InstallationThe contract focuses on the installation and certification of functional emergency exits, including roof hatches, side doors, and push-out windows, in full compliance with Federal Motor Vehicle Safety Standard 217. This work is a subcontract under a Total Small Business Set-Aside, ensuring that only small business entities are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 811191 designates the scope to automotive repair and maintenance services, indicating the nature of the technical installation and safety certification tasks required. Performance of the work is specifically tied to Fort Moore, Georgia, with a clear deadline for proposal submission on August 4, 2026. The contracting activity falls under the Department of Defense, with the sponsoring office identified as FA4830 23 Cons Cc, signaling the project’s military or defense-related context and stringent regulatory requirements for safety and compliance.

Automotive Oil Change and Lubrication Shops

POSTED

DEADLINE

Commercial Vehicle Painting and Custom Livery ServicesThe contract involves the painting of a commercial vehicle in Oxford White with a durable, OEM-level finish specifically designed for military fleet operations, ensuring long-term resistance to environmental stressors and maintaining high aesthetic and protective standards. The work must meet rigorous quality benchmarks suitable for deployment in demanding conditions, with attention to surface preparation, coating integrity, and consistency across all painted surfaces. The scope is limited to vehicle livery application and does not include structural modifications or additional customizations beyond the specified color and finish requirements. This is a total small business set-aside under the SBA program, classified under NAICS code 811192 for commercial vehicle painting services, and is issued by the Department of Defense through the FA4830 23 Cons Cc office. The opportunity was posted on July 24, 2026, with a firm response deadline of August 4, 2026, at 6:00 PM Eastern Time. Performance of the contracted work is required at Fort Moore, Georgia, with a zip code of 31699. The contract type is a subcontract, indicating it supports a larger procurement effort within the military logistics or vehicle maintenance framework. All bidders must qualify as small businesses as defined by SBA standards to be eligible for award.

POSTED

DEADLINE

Heavy-Duty Passenger Bus Manufacturing or SupplyThe contract pertains to the supply of a fully assembled 72-passenger MFSAB built on a commercial chassis, equipped with a Cummins B6.7 engine and an Allison 2500 transmission, featuring air brakes, fire-retardant seating, and certified emergency exits to ensure passenger safety and compliance with operational standards. The vehicle must meet all technical specifications for heavy-duty passenger transport and be fully functional upon delivery. This solicitation is a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 336120 classifying it under the manufacture of motor vehicles for passenger transport. The place of performance is identified as Fort Moore, Georgia, with a zip code of 31699, indicating where the vehicle must be delivered or where services are rendered. The response deadline is set for August 4, 2026, at 6:00 p.m., and the contracting activity is managed by the Department of Defense through office FA4830 23 Cons Cc, signaling this is a defense-related acquisition requiring strict adherence to federal procurement guidelines.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Vehicle Interior Components SupplierThe contract requires the supply and installation of slip-resistant rubber flooring and durable vinyl or heavy-duty cloth seating for all passenger positions in vehicles, ensuring safety and long-term functionality under demanding conditions. Work must be completed in accordance with specifications for material durability, installation standards, and compliance with military or defense-related operational environments, with performance centered at Fort Moore, Georgia. The procurement is issued as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses are eligible to bid, as defined by the Small Business Administration. The North American Industry Classification System code 316998 applies, indicating the focus on other miscellaneous textile product mills, relevant to the production of specialized interior automotive components. The solicitation was posted on July 24, 2026, with a mandatory response deadline of August 4, 2026, at 6:00 PM. The contracting activity falls under the Department of Defense, specifically managed by FA4830 23 Cons Cc, and the awarded contract will support federal vehicle interior upgrades. No point of contact information is provided publicly, and all inquiries must be handled through the official SAM.gov portal linked in the posting. Bidders must be certified small businesses in good standing and prepared to deliver fully installed components meeting stringent quality and safety benchmarks for military and defense applications.

All Other Leather Good and Allied Product Manufacturing

POSTED

DEADLINE

Climate Control System SupplierThe contract requires the supply and installation of a dual-zone climate control system featuring heavy-duty cooling capabilities designed specifically for both passenger and driver zones, ensuring optimal thermal comfort in demanding operational environments. The system must meet rigorous performance standards suitable for military-grade applications, with installation to be completed at Fort Moore, Georgia, under the specified technical and quality requirements. This is a subcontract opportunity set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, adhering to FAR 19.5 guidelines, and is classified under NAICS code 333415 for refrigeration and air conditioning equipment manufacturing. The solicitation was posted on July 24, 2026, with responses due by August 4, 2026, and is issued by the Department of Defense through the FA4830 23 Cons Cc agency office, though no point of contact is listed and detailed location information beyond the ZIP code is omitted.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Safety and Driver Assistance Systems SupplierThe contract seeks a small business to supply and integrate advanced safety and driver assistance systems including anti-lock braking systems, electronic stability control, airbags, tire pressure monitoring systems, and backup cameras for defense-related vehicle platforms. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only eligible small businesses may bid, in accordance with FAR 19.5 rules. The NAICS code 336320 classifies this as automotive safety system manufacturing, and the work must be performed at Fort Moore, Georgia, with a tight response deadline of August 4, 2026. The contracting activity is under the Department of Defense, specifically identified as FA4830 23 Cons Cc, though no point of contact or detailed address information is provided. All proposals must be submitted by the stated deadline to be considered for award, and the systems delivered must meet rigorous military-grade standards for reliability and performance under operational conditions.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Commercial Passenger Shuttle Bus Manufacturer or DistributorThe contract seeks the supply and delivery of one fully assembled, factory-tested 15-passenger shuttle bus that meets all specified technical requirements for immediate operational use. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, with the North American Industry Classification System code 336111 identifying it within the motor vehicle manufacturing sector. The solicitation is issued by the Department of Defense through the FA4830 23 Cons Cc office, with performance required at Fort Moore, Georgia, ZIP code 31699. Responses must be submitted by August 4, 2026, at 6:00 p.m., following the posting date of July 24, 2026. The bus must be delivered in working condition, compliant with all applicable standards, and ready for service upon arrival without additional assembly or modification.

Automobile Manufacturing

POSTED

DEADLINE

15 Person Shuttle BusThe U.S. Air Force is soliciting quotes for one 15-passenger shuttle bus to support the 23 Force Support Squadron at Moody Air Force Base, Georgia, with the vehicle required to meet all technical specifications outlined in the Statement of Work, including safety, comfort, and performance standards. This solicitation, identified as FA483026Q0048, is a total small business set-aside under NAICS code 336110, restricting eligibility to qualified small businesses. All responses must be submitted electronically no later than 10:00 AM EST on August 4, 2026, and must include the RFQ number and title, with submissions sent to both the primary and alternate points of contact. Questions must be submitted by 2:00 PM EST on July 28, 2026, in a Word document or PDF, and responses to inquiries will be posted via amendment on SAM.gov on July 30, 2026, with vendors responsible for monitoring updates. Funds are not currently available for this procurement, and no award will be made until funding is secured; the government retains the right to cancel the solicitation at any time without obligation to reimburse offerors for any incurred costs. The place of performance is Fort Moore, Georgia, and all correspondence must be directed to SSgt Landon Docherty as the primary point of contact, with TSgt Jeffrey Moran as the alternate.

Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

DEADLINE

72-Passenger BusThe solicitation seeks a single 72-passenger Multi-Function School Activity Bus (MFSAB) to support the 23rd Force Support Squadron at Moody AFB, Georgia, with all technical specifications outlined in the Statement of Work requiring strict compliance. The requirement is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, and the NAICS code is 336110 for motor vehicle manufacturing. Quotes must be submitted electronically by 10:00 AM EST on August 4, 2026, referencing the solicitation number FA483026Q0047 and sent to both designated points of contact, with any inquiries required to be submitted no later than 2:00 PM EST on July 28, 2026, via a Word document or PDF attachment. All responses to questions will be publicly posted on SAM.gov via amendment on July 30, 2026, and offerors are responsible for monitoring updates to the solicitation. Funds are not currently available for this procurement, and no award will be made until appropriated funds are secured; the government retains full rights to cancel the solicitation at any time prior to or after the submission deadline without any obligation to reimburse offerors for associated costs. The place of performance is Fort Moore, Georgia, with the contracting office located at Moody AFB, and all correspondence must be directed to the primary point of contact, SSgt Landon Docherty, and alternate, TSgt Jeffrey Moran, using the provided email addresses and phone numbers. The deadline for responses has been posted as 6:00 PM EST on August 4, 2026, but the solicitation specifies submission by 10:00 AM EST on that date, and offerors must adhere strictly to the stated time to remain eligible.

Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

DEADLINE