Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TRANSFORMER, AUDIO FREQ

Active
SPE7M1-26-U-4592Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 95 audio frequency transformers identified by NSN 5950-01-130-8907, classified as a commercial item and restricted source, requiring manufacturing strictly to the original equipment manufacturer’s drawing specifications. Only the prequalified source listed in the solicitation is eligible to supply the item; proposals based on alternative manufacturers must include comprehensive technical data for evaluation under DLAI 3200.1, Enclosure 6. The requirement is subject to DLA’s master list of technical and quality requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and the item is subject to covered defense information handling requirements. Packaging must conform to DLA packaging standards, and all non-accepted supplies must have government identification removed prior to return. A configuration change management process is required, and any requests for variance or deviation must be formally submitted. The solicitation is a total small business set-aside under NAICS code 334416, with a response deadline of August 6, 2026, and delivery required within 92 days after delivery order. The contract is issued by the Department of Defense’s Maritime Supply Chain under solicitation SPE7M1-26-U-4592, with primary point of contact Bryan Fair.

General Info

95 audio transformers, NSN 5950-01-130-8907, CMMC Level 2, small business set-aside, delivery in 92 days.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7M1-26-U-4592.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRANSFORMER,AUDIO FREQUENCY
TRANSFORMER, AUDIO FREQUENCY
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
NOTE: THIS IS A RESTRICTED SOURCE ITEM
MANUFACTURED TO THE OEM DRAWING(S) CITED
HEREIN AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN
PREQUALIFIED TO MANUFACTURE THE ITEM.
OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S
PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND
OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR
THE INTENDED APPLICATION AS PER DLAI 3200.1,
ENCL 6. SAID NSN/Part Number: 5950-01-130-8907 Quantity: 95 EA Purchase Request: 1000238046QTY: 95 Delivery: 92 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WOThis contract specifies the procurement of a fixed wire wound inductive resistor with part number 11003H44-27 and 11003H44B27, supplied by DRS Naval Power Systems Inc, identified by NSN 5905-01-050-8165. The requirement is for 46 units to be delivered FOB origin with zero tolerance for quantity variance, and delivery must be completed within 200 days. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate containers marked as E5, and packaging code U. Marking follows MIL-STD-129 with the special code ZZ, and each unit package must include lead-free or lead content labeling in strict accordance with IPC/JEDEC J-STD-609, with markings placed as specified in section 6.2. The item is designated as critical application, requiring full compliance with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for batteries, fluorescent lights, weapon systems, or specified instruments, and any portable mercury-containing devices must include a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) with a unit price of $46.00, totaling $2,116.00. The contract is issued under solicitation SPE7M1-26-U-4623, with a response deadline of August 6, 2026, and is administered by the Department of Defense’s Maritime Supply Chain under direct DLA procurement for CONUS delivery.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
HOLDER, RESISTORThe contract pertains to the procurement of a HOLDER, RESISTOR with NSN 5905-00-703-0861 and part number 9893953G002, supplied by AMETEK INC under solicitation SPE7M1-26-U-4526. A total of 29 units are required at a unit price of $29.00, with delivery set for 62 days from the contract award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific preservative methods, wrapping materials, and packaging codes. All markings must conform to MIL-STD-129 with no special marking codes required, and palletization must follow DLA standards. Each unit pack must include lead-free or lead-containing component markings per IPC/JEDEC J-STD-609, with placement adhering strictly to the standard’s guidelines. The acquisition is a total small business set-aside under NAICS code 334416, with technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date. The point of contact is Bryan Fair at the Department of Defense’s Maritime Supply Chain office.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECTThe contract is for the procurement of 1,261 electronic shielding gaskets with NSN 5999-00-167-1136 under solicitation SPE7M1-26-U-4532, issued as a total small business set-aside with NAICS code 334416. The delivery must be completed within 116 days after order placement, and responses are due by August 6, 2026. The item is subject to stringent DLA packaging and technical requirements, including adherence to the DLA Master List of Technical and Quality Requirements, with specific controls on export-controlled technical data governed by ITAR or EAR regulations. Disclosure of technical data to foreign persons, including employees and subsidiaries, requires prior authorization from the Department of State or Department of Commerce, and only DLA contractors with approved JCP certification, completed DOD export training, and explicit approval may access this data. The contract also mandates removal of government identification from non-accepted supplies, proper physical marking of bare items, and compliance with covered defense information protocols. All requirements are enforced under DFARS 252.225-7048, and the primary point of contact is Bryan Fair of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NThe contract pertains to the procurement of a variable resistor, identified by part number C8909-2-501C and NSN 5905-01-283-7084, classified as a commercial item and designated as a critical application component. The supplier, Precision Electronics Corporation, must adhere to strict packaging and marking requirements as defined by DLA policies, including MIL-STD-2073-1E and MIL-STD-129, with special labeling for lead-free status per IPC/JEDEC J-STD-609. The item is to be delivered in unit packs of 100, packed in intermediate containers, palletized per DLA standards, and marked in accordance with the prescribed special code ZZ. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is FOB origin within 74 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract specifies a total quantity of 276 units at a unit price that results in a total contract value, with the purchase request number 1000238066 and the solicitation number SPE7M1-26-U-4595. The item falls under the DoD unit of issue system and is covered under DLA Direct, CONUS terms. The contractor must comply with all government mandates regarding removal of government identification from non-accepted supplies and physical identification of bare items. The point of contact for inquiries is Bryan Fair of the Department of Defense, Maritime Supply Chain, and the response deadline for proposals is August 6, 2026. The contract does not guarantee purchase of the estimated quantity and is subject to IDC procurement decisions. All documentation referenced, including packaging, marking, and electrical standards, must be obtained and applied as current versions at time of performance.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, RADIO FThe contract pertains to the procurement of a Transformer, Radio F, identified by NSN 5950-01-375-5032 and part number 142330 from QualityDyne Systems Inc, with a quantity of 10 units at a unit price of $10.00, for a total value of $100.00. Delivery is required within 20 days from the award date, FOB origin, with inspection and acceptance occurring at the destination. The item must be packaged per MIL-STD-2073-1E using packaging method 41, dry, with government box wrapping and no cushioning material, packaged in unit containers D3 with intermediate containers EC, and marked in full compliance with MIL-STD-129 without any special marking codes. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes are to be classified with specified verification levels or AQLs. The DLA Master List of Technical and Quality Requirements governs all technical and quality standards referenced in the contract, with revisions effective as of the solicitation or award date. The product must be shipped by the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Stewart, GA, with the freight and markfor addresses identical to the delivery location. The contract reference number is SPE7M1-26-T-221Z, with a required delivery date of July 20, 2026, and no variance in quantity is permitted. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 334416, and is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIREThe contract is for a single fixed wire resistor with NSN 5905-01-692-5480, under solicitation SPE7M5-26-T-339K, with a response deadline of August 3, 2026, and a required delivery within 20 days of award. The item falls under NAICS code 334416 and is procured by the Department of Defense’s Active Devices Division. Technical and quality requirements are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, regardless of location, and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and prior authorization from DLA. The point of contact for inquiries is Jeanette Heisey, with performance location listed as FPO, zip 96694-1500.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONWThe contract pertains to the procurement of 39 variable, non-wire wound, nonprecision resistors identified by NSN 5905-01-054-6227 under solicitation SPE7M1-26-U-4602, issued by the Department of Defense through the Maritime Supply Chain. The item specifications are defined by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined based on acquisition size and solicitation timeline. Compliance with DLA packaging requirements is mandatory, and items must be physically marked in accordance with RQ017, while non-accepted supplies must have government identification removed per RQ011. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and the delivery deadline is set for 218 days after award. The primary point of contact for inquiries is Bryan Fair at Bryan.Fair@dla.mil or 614-693-0125, and the solicitation is classified under NAICS code 334416 for electronic component manufacturing.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELEThe contract specifies the procurement of 10 fixed electrolytic capacitors with the NSN 5910-00-172-3139 and part numbers 0180-2180 from Keysight Technologies Inc and 36D7796 from Sprague Electric Co, under solicitation SPE7M5-26-T-339F. Delivery is required within 20 days from the order date, FOB origin, with no tolerance for quantity variance. The capacitors must not exceed nine months in age from the date of manufacture, which must be clearly marked on each unit by the manufacturer. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-39028, and all marking must adhere to MIL-STD-129. Each unit package must be labeled per IPC/JEDEC J-STD-609 to identify lead content and other attributes, with markings applied as specified. The items must be shipped via traceable freight methods only; parcel post is prohibited. The delivery destination is FB6355, 180th FW LRS, Swanton OH 43558, with a required delivery date of July 20, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance enforced through referenced R and I numbering. The contract includes specific codes for preservation methods, packaging, and government use identifiers, and the point of contact is Matthew Stanko at DLA.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICALThe contract specifies the procurement of an electrical coil with part number MC13768 and NSN 5950004360115, to be supplied by Eaton Aerospace LLC for aerospace applications. A total quantity of 188 units is requested under solicitation SPE7M1-26-U-4508, with delivery required within 176 days FOB origin. The contract mandates strict adherence to DLA packaging and quality requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for packaging standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero-defect acceptance unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The item is classified as a critical application and covered under DLA Direct CONUS. All quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and solicitation amendments. Packaging must comply with hazardous material guidelines under IP025, and no special marking is required beyond standard MIL-STD-129. The contract includes detailed pricing, a single line item at unit price, and a point of contact for inquiries.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WOThe contract pertains to the procurement of 26 fixed wire wound inductive resistors identified by NSN 5905-01-120-8478, under solicitation SPE7M1-26-U-4628, with a delivery window of 291 days ADO. The item is classified under NAICS code 334416 and is being procured by the Department of Defense through the Maritime Supply Chain office. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Configuration change management is strictly controlled through the Engineering Change Proposal process, and any variance requests for deviations or waivers must be formally submitted. The supplier is required to provide a complete data package for both the approved and alternate parts, as no data is currently available, and must comply with physical marking standards for bare items. Government identification must be removed from non-accepted supplies. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and primary point of contact is Bryan Fair at Bryan.Fair@dla.mil or 6146930125.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334515
New
DIBBS
LEAD, TESTThe solicitation seeks two units of LEAD, TEST with NSN 6625-00-042-4430 under contract SPE7M1-26-T-221T, with a firm delivery deadline of 20 days after award. Full and open competition applies, and the procurement is governed by DLA packaging requirements and technical quality standards listed in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or amendment date if modified. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and all contractors must adhere to DFARS 252.225-7048 for the handling of export-controlled technical data subject to ITAR or EAR regulations, which prohibits unauthorized disclosure to foreign persons regardless of location. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status who have completed mandatory DLA training and questionnaire. The item is to be delivered to Keyport, WA, with a response deadline of August 3, 2026, and the NAICS code 334515 applies. Primary point of contact is Michael Reese at the provided email and phone number.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELECTROThis contract pertains to the procurement of 71 plug-in electronic sockets with the NSN 5935-00-148-3669 under solicitation SPE7M1-26-U-4524, issued as a total small business set-aside with a NAICS code of 334419. Delivery is required within 127 days of award, and all supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which govern packaging, inspection, and acceptance standards. Inspection and acceptance are to occur at the origin, with mandatory bare item marking and strict protocols for the removal of government identification from non-accepted items. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the hardware, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise directed, with verification levels assigned based on attribute criticality. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, and is only accessible to contractors with approved JCP certification, completed DOD export control training, and explicit DLA authorization. Additionally, the contractor must be certified at CMMC Level 2 by an accredited third-party assessment organization and adhere to all applicable cybersecurity and defense information protection standards.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, TRANSMITTERThe contract pertains to the procurement of a Synchro Transmitter, identified by part numbers 867-015-001 from Parker-Hannifin Corporation and HGC-11-RE-6/F798 from Moog Inc., with a National Stock Number of 5990-01-384-9747. A total of 72 units are required under purchase request 1000237780, with a unit price of $72.00 and a total price of $5,184.00. Delivery is mandated within 126 days on a FOB Origin basis, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination point, in compliance with DLA’s direct procurement procedures for CONUS. The item is classified as a Critical Application Item and must adhere to the full suite of technical and quality requirements listed in the DLA Master List, which overrides any other standards such as ASTM D3951. Packaging and labeling must conform to MIL-STD-129 and palletization must follow RP001: DLA Packaging Requirements for Procurement. Additionally, the vendor must maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment compliance and remove government identification from non-accepted supplies. The solicitation number is SPE7M1-26-U-4634, with a response deadline of August 6, 2026, issued under the NAICS code 335312 by the Department of Defense’s Maritime Supply Chain office.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333914
New
DIBBS
PUMP, RECIPROCATINGThe contract is for the procurement of two reciprocating pumps with NSN 4320-01-304-1371 and part number RPA308112C, issued under solicitation SPE7M1-26-T-221Q by the Department of Defense’s Maritime Supply Chain. Delivery is required within 20 days of contract award, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all supplies must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, with packaging and labeling controlled by DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The Unit of Issue is each, and palletization must adhere to DLA’s RP001 packaging requirements. The items are to be delivered to USNS YUKON T-AO 202 at FPO AP 96686, with transportation details governed by DLAD PROC NOTE C19 and C20. The original required delivery date is July 20, 2026, and the contract includes specific government-only codes for logistics tracking and distribution. All technical and quality specifications referenced via R or I numbers are sourced from the DLA Master List, whose applicable revision is determined by the solicitation issue date or any amendment date.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of an electromagnetic relay under solicitation SPE7M1-26-U-4567, with the NSN 5945-00-818-8904 and part number MS25267-A1, requiring 30 units to be delivered FOB origin within 247 days. The item must comply with technical specifications MIL-PRF-6106R(1) SUP 1A and MS25267J, and all applicable requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Configuration change management, deviation requests, and qualified manufacturers lists are strictly controlled, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with additional containment requirements for portable devices. The use of Class I ozone-depleting substances is forbidden without written contracting officer approval, and this prohibition overrides any conflicting specification language. The contractor must ensure compliance with DLA packaging standards per MIL-STD-2073-1E, including prescribed methods for preservation, wrapping, and unit container marking, and all packaging must adhere to MIL-STD-129 with the special marking code ZZ. Each individual unit must be labeled according to IPC/JEDEC J-STD-609 to identify lead content, with markings placed as specified in the standard. Delivery is subject to zero variance in quantity, inspection and acceptance occur at the destination, and the item is classified as a critical application. Full and open competition is required, and the contract applies to government-furnished hardware with no commercial item exceptions. The point of contact is Bryan Fair at DLA, and all information must be interpreted within the context of the DLA acquisition framework.
Relay and Industrial Control Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334418
New
DIBBS
SOLENOID, ELECTRICALThe contract pertains to the procurement of a solenoid, electrical component with NSN 5945-00-463-9280 and part number 965830, sourced from approved vendors including RP001 compliant suppliers such as ROCKER SOLENOID CO, G.W. LISK CO, INC, and PARKER HANNIFIN CORPORATION. The item is classified as a critical application item under a total small business set-aside, with a requirement for 47 units delivered within 198 days FOB origin, with no tolerance for quantity variance. The contract mandates strict adherence to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging code U, with all marking requirements following MIL-STD-129 and the special code ZZ for lead finish identification as defined by IPC/JEDEC J-STD-609. Each individual unit must be labeled in accordance with this standard to denote lead content and other attributes, with placement strictly regulated. Inspection and acceptance occur at the destination point, and the contract is issued under DLA direct, CONUS coverage using the DoD unit of issue system. The solenoid is subject to the overarching technical and quality requirements outlined in the DLA Master List, with compliance governed by the revision in effect at the solicitation or award date depending on acquisition size. The solicitation number is SPE7M1-26-U-4525, with a response deadline of August 6, 2026, and the primary point of contact is Bryan Fair of the Department of Defense’s Maritime Supply Chain.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
IMPELLERThe contract specifies the procurement of two impellers with a diameter of 7.187 inches, identified by NSN 4320012660717 and purchase request 7017574014, under solicitation SPE7M1-26-T-221U. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The impellers must conform to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and all packaging must comply with MIL-STD-129 for marking and labeling. Unit packaging must adhere to the specified Quantity per Unit Pack (QUP) of 001, and palletization must follow DLA Packaging Requirements. The impellers are to be shipped via traceable freight to the designated Virginia Beach shipping address, and parcel post is explicitly prohibited. The contract lists two qualified suppliers—All-Safe Inc and Pentair Federal Pump, LLC—as authorized sources for the part number 443-1768-208, and the unit price is set at $2.00 per unit for a total price of $4.00. The government’s required delivery date is July 20, 2026, with the solicitation issued on July 22, 2026, and responses due by August 3, 2026. The contracting office is the Maritime Supply Chain under the Department of Defense, with Michael Reese as the primary point of contact.
Fluid Power Pump and Motor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUENCYThe contract pertains to the procurement of 22 units of a Radio Frequency Interference Filter with NSN 5915-01-260-4112 under solicitation SPE7M1-26-U-4586, issued by the Department of Defense's Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 106 days after award, with responses due by August 6, 2026. The item is subject to stringent cybersecurity requirements, including compliance with CMMC Level 2 as a Certified Third-Party Assessment Organization, and adherence to DLA’s technical and quality specifications referenced in their Master List. Technical data associated with the filter is classified as export-controlled under either ITAR or EAR, restricting dissemination to foreign persons regardless of location and mandating prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access this data. Additionally, the contractor must comply with DLA packaging standards, remove government identification from non-accepted supplies, and handle Covered Defense Information in accordance with applicable regulations. The procurement is managed by Point of Contact Bryan Fair, with all details accessible via the DIBBS website.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
HEATER, THERMAL RELEASEThe contract pertains to the procurement of 55 units of a Thermal Release Heater identified by NSN 5999-00-504-9889, with a delivery schedule of 350 days from award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Configuration control requires formal engineering change proposals and procedures for requesting deviations or waivers. Items must be physically marked according to established identification standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No intentional addition of mercury or mercury-containing compounds is permitted in any supplied hardware or materials, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. No existing data package is available, and the alternate offeror must submit a complete data package including technical details for both the approved and alternate parts. The solicitation was issued under SPE7M1-26-U-4564 with a response deadline of August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain through primary point of contact Bryan Fair.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract is for the procurement of one power supply with NSN/Part Number 6120-01-592-7992, issued under solicitation SPE7M1-26-T-222A by the Department of Defense through the Maritime Supply Chain. The offeror must comply with all DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item must be delivered within 20 days after delivery order issuance to Fort Bliss, Texas, with a response deadline of August 3, 2026. The offeror is also required to submit a complete data package including specifications for both the approved and alternate parts. The primary point of contact for inquiries is Michael Reese, reachable via email or phone, and the solicitation is unreserved with no set-aside designations, classified under NAICS code 335999 for other electrical equipment and component manufacturing.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICALThe contract pertains to the procurement of an electrical coil with NSN 5950-01-106-6783 and part number 213322-1178, supplied by Marotta Controls Inc, under solicitation SPE7M1-26-U-4616. Six units are required at a unit price of $6.00, totaling $36.00, with delivery mandated within 164 days FOB origin and no variance allowed in quantity. Inspection and acceptance occur at destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special handling instructions indicating the item is delicate, featuring fragile terminals that must remain protected. The packaging code is U, utilizing preservative method 41, and requires marking with the special code 06 for delicate instrument and arrow up. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, or specific instruments as authorized by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier per NAVSEA 5100-003D. All packaging, marking, and shipping must adhere to DLA’s RP001 and IP025 requirements for hazardous materials. The contract falls under DLA Direct, CONUS coverage and uses the DoD-authorized unit of issue. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision controlled by the acquisition type and relevant dates. Purchasing is estimated and subject to IDC confirmation.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
DISPLAY, OPTOELECTRONICThe contract pertains to the procurement of 17 units of a display, optoelectronic item identified by NSN 5980-01-247-1862, with a delivery requirement of 120 days after order. The solicitation, numbered SPE7M1-26-U-4627, is issued under a Women-Owned Small Business Set-Aside and falls under NAICS code 334413. All supplied items must strictly conform to the source-controlled drawing referenced in the contract, and only the sources listed on that drawing are currently approved for this procurement, though additional qualified sources not yet reflected on the drawing may be considered in the future. Offerors seeking to qualify their products for future acquisitions must contact the cognizant design activity specified on the drawing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on the acquisition size. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated; attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Packaging must comply with DLA packaging requirements, and government identification must be removed from any non-accepted supplies. The point of contact for this solicitation is Bryan Fair at the Department of Defense’s Maritime Supply Chain.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details