This Combined Synopsis/Solicitation opportunity from Department Of Transportation was posted on January 19, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TS GOLDEN BEAR Refrigeration Repairs

Awarded

6991PE18Q000001Federal

Submission Closed01/26/2018, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 30, 2026, with a strict response deadline of November 4, 2026. Interested parties can access further details and submit their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting lump sum fee-for-service bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and manufacturer-specified replacement parts. The scope of work includes the disassembly and inspection of the clutch assembly, replacement of friction discs, plates, bearings, oil seals, and O-rings, and the resurfacing of the flywheel. Additionally, the contractor must replace necessary hydraulic pipes and flanges, service applicable filters and fluids, and verify the proper operation of the clutch and power take-off system under load. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 811310. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a completed bid sheet, supplier packet, W-9, and proof of insurance. Award will be based on best value. The contract incorporates various Federal Acquisition Regulation clauses, including standards for combating trafficking in persons, equal opportunity, and the Service Contract Act wage determination for Kentucky. Final acceptance of the work is contingent upon inspection by the Facility Maintenance Department to ensure the tractor is restored to safe and reliable operating condition.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.

Defense Logistics Agency

POSTED

DEADLINE

Boiler Combustion Analysis and Control TuningThis subcontract for Boiler Combustion Analysis and Control Tuning involves providing specialized calibration and tuning services for boiler combustion systems on Texas A&M University projects. The selected contractor will work under prime contractors to adjust air-to-fuel ratios, calibrate control sensors, and ensure strict adherence to EPA emissions standards using flue gas meters and combustion analyzers. The final deliverables for this engagement include a comprehensive combustion analysis report and a fully tuned control system. To qualify for this role, contractors must hold manufacturer-specific control system certifications. The opportunity was posted on October 30, 2026, with a response deadline of November 18, 2026. This project falls under NAICS code 811310 and is managed through the Texas A&M University procurement system.

POSTED

DEADLINE

Boiler & Refractory Repairs Services

Solicitation # TAMU-RFP-27-5144

Texas A&M University is soliciting proposals under RFP TAMU-RFP-27-5144 to establish a Master Order for Boiler and Refractory Services to be performed at its campus in College Station, Texas. The solicitation period opens on October 30, 2026, and closes on November 18, 2026, at 2:00 PM CST. All responses must be submitted electronically through the AggieBid portal, and vendors are required to adhere to the terms and conditions specified within that system and the university's official purchasing guidelines. While the primary solicitation establishes the intent to secure these services, detailed technical specifications, deliverables, and performance outputs are contained within attachments available exclusively through the AggieBid portal. Interested parties may direct inquiries to the buyer at [email hidden] or contact Jim Nelms. No specific contract value, period of performance, or evaluation criteria were provided in the initial solicitation documents.

POSTED

DEADLINE

Chiller Maintenance Services

Solicitation # 26FS0006

Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.

California Department of Veterans Affairs

POSTED

DEADLINE

Well Pump & Motor ServicesThis subcontract for Well Pump and Motor Services involves providing specialized inspection, repair, and installation services for prime contractors working on City of Riverside Public Utilities projects. The scope of work includes the removal of existing pumps, the refurbishment of motors, and the installation of new or repaired systems guided by Pump Recommendation reports. To ensure quality and safety, the contractor must utilize NSF-certified pump components and appropriate pump hoisting equipment to deliver fully operational and tested systems. The project is located in San Bernardino, California, under NAICS code 811310. Interested parties must submit their responses by the deadline of November 20, 2026.

POSTED

DEADLINE

Hormann High-Speed Door Maintenance and RepairThis subcontract for the City of Ontario involves the specialized inspection, service, and repair of Hormann high-speed and high-performance bay doors. The scope of work includes cleaning motor boxes, adjusting timers, inspecting circuit boards, and conducting comprehensive functionality tests. To ensure compliance with ASTM F2200 Safety Standards, all work must be performed by Hormann Certified technicians and include the completion of a UL325 Safety Checklist, with detailed written inspection reports and repair estimates provided upon completion. The project is located in Ontario, California, under NAICS code 811310. Interested parties must submit their responses by the deadline of November 19, 2026.

POSTED

DEADLINE

Conveyance System Operations and Maintenance Services

Solicitation # RFP-2026-0025

The City of Houston is soliciting proposals under RFP-2026-0025 for a qualified contractor to provide comprehensive conveyance systems operations and maintenance services for a five year term. The scope of work covers George Bush Intercontinental Airport, William P. Hobby Airport, and Ellington Airport and Spaceport, as well as Houston Airport System administration buildings. The contractor is responsible for providing all labor, management, supervision, parts, equipment, and tools necessary to ensure the safe and continuous operation of elevators, escalators, moving sidewalks, and wheelchair lifts. Due to the intense operating environment, the contract requires a high degree of preventive maintenance, corrective maintenance, and quality control in accordance with ASME A17.1, A17.2, A17.3, and A18.1 standards. The selection process is based on the best overall value, with a total of 105 available points. Evaluation factors include technical competence, safety, and preference points for Hire Houston First designated City or Local Businesses, while financial stability and W/SBE participation are assessed on a pass/fail basis. The contract includes a 30 day phase-in period and follows the Texas Prompt Payment Act for invoicing, with specific discounts available for early payment. Compliance requirements include adherence to the City of Houston Code of Ordinances regarding MWSBE programs, equal employment opportunity, and conflict of interest disclosures. Pricing for other work services is based on an actual cost-plus percentage markup, with an estimated five year value of 3,750,000 dollars for materials.

POSTED

DEADLINE

MTU Diesel Engine Maintenance and RepairThis subcontract, titled MTU Diesel Engine Maintenance and Repair, involves providing specialized mechanical maintenance for MTU diesel engine prime movers supporting prime contractors on US Army projects at USAG Humphreys. The scope of work includes the replacement of air cleaner elements, fuel filters, and oil separator elements, as well as the testing and replacement of starter and panel batteries and the adjustment of charging circuits. Managed by the Department of Defense under the 0906 Aq Co Det B Contracting office, the contract requires the delivery of detailed engine service logs and a 12-month warranty on all repair work. The opportunity is categorized under NAICS code 811310, with a response deadline set for November 30, 2026.

0906 Aq Co Det B Contracti

POSTED

DEADLINE

Euro-Diesel DRUPS Preventive & Corrective MaintenanceThe Euro-Diesel DRUPS Preventive and Corrective Maintenance subcontract involves providing scheduled and unscheduled maintenance for integrated DRUPS systems supporting US Army projects at USAG Humphreys. The scope of work includes performing monthly visual inspections, testing quick-start functions, and monitoring vibration levels and rotor drum speed for accumulators. Additionally, the contractor is responsible for inspecting and adjusting coils and clutch friction lining every 18 weeks, while providing monthly C-maintenance result reports and PM checklists. This Department of Defense opportunity falls under NAICS code 811310 and is managed by the 0906 Aq Co Det B Contracti. The solicitation was posted on October 30, 2026, with a response deadline set for November 30, 2026.

0906 Aq Co Det B Contracti

POSTED

DEADLINE

Tote Conveyor System Technical SupportThis subcontract for the Department of Veterans Affairs National CMOP Office involves providing specialized technical support for tote conveyor systems at VA Consolidated Mail Outpatient Pharmacy projects in Chelmsford, Massachusetts. The scope of work includes on-site maintenance and repair of conveyor systems, bar code scanners, sensors, and mechanical drive components to ensure all scanning and transport systems remain fully functional. The contractor must adhere to strict safety and regulatory guidelines, specifically complying with OSHA and NFPA 70E/99 standards. Additionally, all personnel assigned to the project are required to be OIG screened. The solicitation was posted on October 30, 2026, with a response deadline of November 17, 2026, under NAICS code 811310.

National Cmop Office (36C770)

POSTED

about 9 hours ago

DEADLINE

in 18 days

AI Contract Overview

The Department of Transportation Maritime Administration is seeking a qualified vendor to perform domestic and medical refrigeration repairs on the Training Ship Golden Bear in Vallejo, California. This requirement, issued under solicitation 6991PE18Q000001, is a total small business set-aside under NAICS code 811310. The project will be awarded as a single firm fixed-price purchase order with a period of performance from February 1, 2018, to March 2, 2018. The scope of work includes replacing the number one domestic Carrier Reefer compressor with a government furnished equipment warranty unit, renewing the shaft seal and moisture indicator on the number two compressor, and the supply and installation of a new medical-rated refrigerator for the ship's hospital. The selected contractor must possess specific experience with Carrier Compressors and is required to conduct a two-week operational test period including detailed logs and leak checks. All work must adhere to the provided statement of work, terms and conditions, and standard FAR clauses for commercial items.

General Info

Agency

Department Of Transportation → 693JF7 DOT Maritime Administration

Contract Value

$49,464

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

VALLEJO, CA, 94590, USA

Set-Aside

SBA

Awardee

COMFORT AIR MECHANICAL SYSTEMS, INC.

Award Issued Date

02/20/2018, 12:00:00 AM UTC

Documents

sow

High

sow

High

1 page · rfq

High

rfq

High

specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJan 19

Combined Synopsis

AwardedFeb 20

Contract was awarded

Submission Closed

01/26/2018, 10:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Transportation → 693JF7 DOT Maritime Administration

Contacts1 person available

OfficeWASHINGTON, DC, 20590, USA

Organization / AgencyDepartment Of Transportation → 693JF7 DOT Maritime Administration

Office AddressWASHINGTON, DC, 20590, USA

Contacts

Melissa E. Reams

contact@example.gov

+1 (555) 000-0000

Full Description

The Department of Transportation (DOT), Maritime Administration (MARAD) is the sponsor for this effort. MARAD seeks a qualified vendor capable of performing Domestic and Medical Refrigeration Repairs on the Training Ship GOLDEN BEAR IAW the attached Statement of Work. (i) This acquisition uses the simplified procedures for acquisition of commercial items per FAR 13. This is a combined synopsis/solicitation for commercial items prepared In accordance with (IAW) the format at FAR subpart 12.6, Streamlined Procedures, under Acquisition of Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only written solicitation; quotations are being requested; and a written (formal) solicitation will not be issued. This solicitation and any amendments that include answers to questions will be provided through the FEDERAL BUSINESS OPPORTUNITIES (FBO) website https://www.fbo.gov. (ii) The solicitation number for this requirement is 6991PE18Q000001 and it is being issued as a Request for Quotation (RFQ). (iii) This solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular. (iv) This procurement is being issued as a Total Small Business Set-Aside. Applicable North American Industry Classification System (NAICS) code is: 811310. MARAD intends to award a single Firm fixed-price Purchase Order (PO). (v) Instruction for Submittal of Quotation: a. Submit the items in the instruction below per FAR 52.212-1 Instructions to Offerors - Commercial Items. b. Submit your reps and certs as shown in the instruction below per FAR 52.212-3 Offeror Representations and Certifications - Commercial Items (JAN 2017). If you do not use the on-line certification you may do your reps and certs on the addendum to the RFQ that provides the full text clause. If you use the addendum then scan and submit your reps and certs with your quotation. (vi) Description of Requirements The requirement is for performing the Domestic and Medical Refrigeration Repairs on the Training Ship GOLDEN BEAR IAW the attached Statement of Work. Attachment 1 Statement of Work Attachment 2 Clauses and Provisions Attachment 3 Quote Sheet Attachment 4 Terms and Conditions Attachment 5 Wage Determination (vii) Questions regarding the solicitation and quotations shall be e-mailed to the Contract Specialist, Ms. Melissa Reams at contact@example.gov. No phone calls will be accepted. (ix) Quotations are due no later than Wednesday January 26th, 2018 at 1400 PT. Submit quotes electronically to contact@example.gov