Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on May 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

UII Data Validation & Verification Reporting

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Alcohol and Controlled Substances Testing
Solicitation # 3344-26
Nueces County is seeking qualified vendors to implement a comprehensive alcohol and controlled substances testing program for its safety-sensitive employees, including approximately 30 commercial motor vehicle drivers subject to Federal Motor Carrier Safety Administration regulations, 750 additional employees covered under the Drug-Free Workplace Act of 1984, and up to 1,200 employees subject to reasonable suspicion testing. The contracted vendor must provide full-service testing capabilities including breath alcohol and split urine specimen collection, laboratory analysis, Medical Review Officer services, physical exams, respirator fit testing, immunizations, vision and audiometric screenings, and all related administrative and compliance support. The program must align with federal standards under 49 CFR Parts 40 and 382, including integration with the FMCSA Clearinghouse, and the vendor will be responsible for ensuring regulatory compliance, maintaining strict chain-of-custody protocols, and delivering timely and accurate reporting. The contract will run for an initial term of thirty-six months with the possibility of two twelve-month renewals, contingent on mutual agreement, and if no successor contract is awarded, the vendor must continue services on a month-to-month basis until replaced. Proposals must be submitted electronically via PublicPurchase.com by the deadline, with physical submissions accepted only if online access is unavailable, requiring one signed original and one PDF on a USB drive in a sealed envelope labeled with the RFP number and project name. The contract administrator is Jim Landers, Human Resources Director, and submissions should be directed to Michael Robinson, Purchasing Agent, at the Nueces County Courthouse. The county currently relies on Alliance for testing services, and the vendor selected will assume responsibility for all current and anticipated testing volumes, including projected increases in non-DOT tests over the next fiscal years. All required forms, qualifications, and documentation must be completed and submitted as specified, with no deviations permitted from the RFP requirements.
Nueces County

POSTED

about 12 hours ago

DEADLINE

in 23 days
NAICS: 541380
New
Federal
Automated Scanning System
Solicitation # N00421-27-NORFP-AB23000-0001
The U.S. Navy, through Naval Air Systems Command, intends to award a sole-source, firm-fixed-price contract to NDT Solutions for the development of an automated scanning system software suite utilizing artificial intelligence and machine learning to enhance nondestructive inspection capabilities for composite bond lines on MQ-4C aircraft. This effort supports the Air Systems Group’s Material Engineering Division, specifically the Nondestructive Inspection Branch, and is designed to assist NDI Level IIIs in detecting, sizing, and characterizing defects during phased array ultrasonic inspections using the AUSS Mobile system. The acquisition is justified under USC 2304(c)(1) and FAR 6.302-1 due to the unique and proprietary nature of the required technology, with no other source capable of meeting the agency’s specific needs. The contract will be processed under FAR Parts 12 and 13.5 as a commercial acquisition. This notice is not a solicitation for competitive bids but serves as an opportunity for other responsible parties to submit capability statements by 8:00 AM EST on August 19, 2026, to Liam Umek at liam.j.umek.civ@us.navy.mil solely to inform the government’s decision on whether to reopen the procurement for competition. No reimbursement will be provided for submissions, and all information provided becomes the property of the government. Offerors must be registered in the System for Award Management (SAM) to be considered. The delivered system will be shipped to the NDI Branch at 48066 Shaw Rd., Building 2188, Patuxent River, MD 20670, and the solicitation number for this action is N00421-27-NORFP-AB23000-0001, with a NAICS code of 541380.
Navair

POSTED

about 13 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
Federal
Test Pit and Soil Boring Advancement Phase II Environmental Site Assessment Royal Electric Yard, Sykesville, Maryland
Solicitation # 6913G626Q300046
Under an interagency agreement between the U.S. Department of Transportation’s John A. Volpe National Transportation Systems Center and the U.S. Environmental Protection Agency, a Phase II Environmental Site Assessment is being conducted at the Royal Electric Yard, a 4.1-acre parcel located at 7512 Main Street in Sykesville, Maryland, with the goal of investigating potential soil and groundwater contamination from historic automotive junking activities. A prior Phase I ESA identified likely presence of hazardous substances including used oils, brake and hydraulic fluids, gasoline, diesel fuels, mercury switches, asbestos, refrigerants, metals, batteries, and antifreeze, primarily in the northern wooded portion of the site, prompting the need for subsurface investigation. The scope includes advancing up to ten soil borings organized in a sitewide grid and up to six test pits near known debris piles, supported by geophysical surveys using electromagnetic conductivity, ground penetrating radar, and magnetometry to detect buried metallic and non-metallic objects. Sampling and analysis must adhere to ASTM E1903-19 standards, Maryland Department of the Environment residential soil cleanup criteria, and Volpe’s Generic Quality Assurance Project Plan and Standard Operating Procedures, with all samples requiring proper labeling, preservation, and shipping via approved containers, chain-of-custody documentation, and cooling to maintain integrity. The work is to be performed under a firm-fixed-price contract, fully funded at award for CLIN 00100, with a performance period from August 24 to December 1, 2026, and is set aside exclusively for small businesses. Contractors must possess valid certifications to execute the work, be registered in SAM with a current Unique Entity Identifier, and comply with extensive federal regulations including security prohibitions, data safeguarding requirements, service contract labor standards, Buy American provisions, and counter-trafficking policies. Proposal submission is required via email by August 11, 2026, and must include a completed SF-1449, a detailed firm-fixed-price breakdown covering labor, equipment, lab analysis, permits, and survey costs, and a two-page technical narrative demonstrating understanding of the work plan, site conditions, sampling methodology, and operational efficiencies. Deliverables include draft and final work plans, a call-before-you-dig notification, a geophysical survey report, and a final Phase II ESA report with analytical data, findings, and recommendations. All soil and debris deemed grossly contaminated must be segregated into metal drums or equivalent containers for offsite disposal
6913G6 Volpe National Transportation System Cntr

POSTED

about 13 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
International
AAFC REQUEST FOR SUPPLY ARRANGEMENT - PMC Analysis of Pesticide Residues
Solicitation # CSC-2627-0278
The Government of Canada, through Agriculture and Agri-Food Canada, is soliciting offers to establish a supply arrangement for the chemical analysis of pesticide residues in crop samples collected from field trials across Canada and the United States. The analyses must adhere strictly to the OECD Principles of Good Laboratory Practices (rev 1997), approved study plans and amendments, and Health Canada’s Pesticides Regulatory Directorate Residue Chemistry Guidelines. The resulting data will support regulatory submissions for new minor pesticide uses, ensuring compliance with national safety and efficacy standards. Offerors must demonstrate capability to perform precise, compliant, and reproducible residue analyses under controlled conditions. The solicitation, identified as CSC2627-0278, was posted on August 4, 2026, with responses due by September 10, 2026. The contract will be managed by the Department of Agriculture and Agri-Food, with Kyle Harrington serving as the primary point of contact for technical and contractual inquiries. Performance of services will span multiple locations in Canada and the U.S., requiring logistical coordination and adherence to international regulatory frameworks. Offerors are expected to provide not only analytical expertise but also documentation and quality assurance protocols that meet the rigorous requirements of Health Canada’s regulatory review process for pesticide approvals.
Department of Agriculture and Agri-Food

POSTED

about 20 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

This contract requires validation of UID mark syntax and data elements along with verification of symbol quality in accordance with ISO/IEC 15415 using the MRI protocol. The scope includes ensuring all markings meet technical standards for legibility, contrast, and structure to guarantee accurate machine reading. Successful performance must result in the generation of government-compliant pass/fail reports that document conformance or non-conformance for each item evaluated. The work is categorized as a subcontract under NAICS code 541380 and is issued by the Department of National Defence of the Government of Canada, with performance expected to occur in British Columbia and Nova Scotia. The solicitation was posted on May 1, 2026, and responses are due by June 10, 2026.

General Info

Validation of UID marks and data per ISO/IEC 15415; pass/fail reports for Canadian Defense.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Validate UID mark syntax, data elements, and verify symbol quality per ISO/IEC 15415 using MRI protocol; generate government-compliant pass/fail reports.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 335220
New
International
Washing and Drying Machines
Solicitation # W0501-27-M011/A
The Department of National Defence is seeking to procure new front and top loading electric washing machines along with electric and gas drying machines to support the laundry needs of live-in military personnel. This procurement is being managed under solicitation number W0501-27-M011A, with bids due by August 17, 2026, and the opportunity posted on August 4, 2026. The equipment must be delivered and installed at the location in Oromocto, New Brunswick, to ensure timely operational readiness and compliance with the living standards for personnel stationed there. The contract is open to all eligible bidders without specific set-aside restrictions and falls under federal procurement guidelines. Ann Marie MacDonald serves as the primary point of contact for this solicitation, acting as the Contracting Authority and can be reached via email at AnnMarieMacDonald@forces.gc.ca or by phone at 506-432-3376. Bidders are expected to meet all technical and performance specifications outlined in the bid package, ensuring the machines are durable, energy efficient, and suitable for high-volume, continuous use in a military environment. The procurement is part of ongoing efforts to modernize and maintain essential life support infrastructure in Canadian Armed Forces facilities, and all proposals must be submitted through the CanadaBuys portal by the stated deadline.
Major Household Appliance Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
International
Material Handling Equipment
Solicitation # W8486-270875/A
The Department of National Defence is soliciting bids for the procurement of 30 distinct spare parts for Material Handling Equipment, with delivery required by December 31, 2026, to either 7 Canadian Forces Supply Depot in Edmonton, Alberta, or 25 Canadian Forces Supply Depot in Montreal, Quebec. Items range from alarm systems and filler caps to fuel injectors, servovalves, relays, and hydraulic components, each specified by GSIN, NSN, part number, and CAGE code, with exact quantities and delivery locations defined per item. The procurement follows a Lowest Price Technically Acceptable (LPTA) evaluation method, where technical compliance is a mandatory threshold and award is granted to the lowest-priced compliant offer on an item-by-item basis. All items must be new, conform to ISO 9001:2015 quality standards, and be delivered DDP (Delivered Duty Paid) under Incoterms 2020, with the contractor responsible for all transportation, duties, and import costs. Packaging and marking must adhere to specific Canadian Forces standards, including D-LM-008-036/SF-000 for most items, D-LM-008-026/SF-001 for seals, and D-LM-008-001/SF-001 for preservation-critical components, with all wood packaging required to meet ISPM 15 and carry the IPPC compliance mark. Each item must be individually marked with the manufacturer’s name and part number, and packaging must include a complete packing slip with contract and procurement numbers, along with a signed inspection voucher where applicable. Offerors must submit proposals electronically via email by September 8, 2026, to the designated address, with file size limited to 5 MB and no paper submissions accepted. Proposals must include certified declarations on ethics, anti-bribery, conflict of interest, and compliance with Canadian procurement codes; foreign contractors must affirm Canadian supplier status under reciprocal agreements. The Contracting Authority is Karen Benedikt, and while no security clearance is required, all invoice submissions constitute certification of contract compliance. Bidders may request a debriefing within 15 working days of award notification, and the Crown retains the right to negotiate with any supplier.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
International
UPS APC BATTERY REPLACEMENT
Solicitation # W6369-27-X001/A
The Department of National Defence, on behalf of Defence Research and Development Canada, is seeking a contractor to perform a comprehensive battery replacement service for an APC Uninterruptible Power Supply (UPS) system at the DRDC Ottawa Research Centre. The scope includes the supply, installation, configuration, and testing of eight new SYBT4 battery modules for the specific APC model STCF40KF (Serial No. PD0810360116), along with the safe, environmentally compliant removal and disposal of the existing batteries using the WMBRS8-MB-T4 Modular Battery Replacement Service. Only original equipment manufacturer components are acceptable; no substitutes or equivalents will be permitted due to critical system compatibility and operational integrity requirements. All work must be completed on-site at Building 29, 3701 Carling Avenue, Ottawa, Ontario, within a three-month period following contract award. The solicitation, designated W6369-27-X001/A, is a sole-source procurement under the Canadian Content Policy, restricting eligibility to suppliers offering Canadian goods and services. A SECRET-level security clearance is mandatory for all personnel accessing the facility, and the contractor must demonstrate corporate-level facility security compliance. The contract is not subject to international trade agreements or Indigenous business set-asides, nor does it include option periods or modifications. Proposals must be submitted by the deadline of August 6, 2026, directly via email to the Contracting Authority, Samer Fattouch. There is no public posting of the solicitation or structured pricing table; bidders are expected to propose their own pricing without specification of unit costs or extended amounts. No formal evaluation factors, weights, or award basis have been disclosed, and no detailed packaging, labeling, invoicing, or accounting data is provided. The successful offeror must ensure seamless UPS system operation post-installation, with final acceptance conducted by the Government at the worksite based on verified performance and compliance with all security and environmental requirements.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 20 hours ago

DEADLINE

in 1 day
View Details