This Government Contract opportunity from Department Of Homeland Security was posted on December 11, 2015. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

UNDERWATER HULL CLEANING

Awarded

HSCG80-16-Q-P45612Federal

Submission Closed12/09/2015, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

Federal

USNS EARL WARREN (T-AO 207) ROH/UWILD

Solicitation # N6264927RL005

NAVSUP Fleet Logistics Center Yokosuka, Site Singapore, is soliciting a fixed-price contract for the repair and maintenance of the USNS EARL WARREN (T-AO 207), specifically for Restricted Overhaul and Underwater Inspection in Lieu of Drydocking (ROH/UWILD) services. The work must be performed in accordance with the Military Sealift Command specification SSUN 27-010 and ABS standards. The period of performance is scheduled from May to July 2027, with the place of performance located within the U.S. 7th Fleet Area of Responsibility, excluding India. This is a total small business set-aside procurement, and interested offerors must maintain an active registration in the System for Award Management (SAM). Proposals are due by December 2, 2026, at 1:00 PM Singapore Standard Time and must be submitted electronically via DoD SAFE. The award will be granted to the responsible offeror providing the lowest evaluated price, provided their technical approach and past performance are rated as acceptable. Evaluation of past performance focuses on similar work performed on Navy or government military vessels within the last five years. Required submission volumes include a price proposal using Attachment J-3, a technical volume, a past performance volume, and a cover page with administrative requirements. Payment will be processed through Wide Area WorkFlow (WAWF) and managed by the designated Project Planning and Execution (PPE) personnel.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Solicitation # N6817127QN006

Solicitation N6817127QN006 is a Request for Quote issued by NAVSUP FLC Sigonella Naples Office for firm fixed price non-commercial voyage repair services for the USS RAFAEL PERALTA (DDG 115). The work is to be performed in Mombasa, Kenya, with a period of performance from November 12, 2026, to November 18, 2026. The scope of work includes hull maintenance such as high-pressure fresh water washing, cleaning and inspection of air conditioning and refrigeration plant condensers, rust and corrosion removal, replacement of lagging and insulation, furniture upholstery replacement, and the provision of rigging services and scaffolding. All work must adhere to NAVSEA Standard Items and SCF Part 1915 Occupational Safety and Health Standards for Shipyard Employment. Award will be granted to the lowest priced technically acceptable offeror, with technical capabilities rated as either acceptable or unacceptable. Prospective contractors must submit a completed J-1 Price Breakdown in US dollars, a draft Test and Inspection Plan, and a signed Use and Non-Disclosure Agreement to access restricted technical data. Required submission documentation includes Standard Form 18, completed Standard Form 30 amendments, and technical qualifications verified via the Attachment J-3 checklist. The deadline for proposal submission is November 2, 2026, at 13:00 CET. Post-award invoicing must be processed electronically through Wide Area WorkFlow.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

U.S. NAVY VESSEL - CASREPS - AC AND REEFER PLANT REPAIR

Solicitation # N6817127QN009

Solicitation N6817127QN009, issued by the Navsup Flc Sigonella Naples Office for the U.S. Navy, seeks a qualified Carrier system service provider to perform troubleshooting, diagnosis, and repair of a vessel's air conditioning and refrigeration plant. The scope of work includes restoring the A/C system to operational status, testing system components, and procuring necessary parts for the refrigeration plant. Performance will take place in Malaga, Spain, with a period of performance from November 16, 2026, through November 20, 2026. The work is governed by specific NAVSEA drawings and technical manuals, and the contractor must provide proof of ISO 9001 or 14001 certification for marine maintenance and repair services. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) basis, where technical capability is rated as either acceptable or unacceptable. Qualified offerors must submit their quotes and technical documentation via email by November 9, 2026. The contract requires adherence to strict safety standards, particularly regarding high voltage electrical systems, and mandates electronic invoicing through Wide Area WorkFlow (WAWF). This is not a small business set-aside, and the contractor must comply with various FAR and DFARS clauses, including those related to hazardous materials labeling and vessel access.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

7th Fleet Welder Qualification and Sustained Capability Program

Solicitation # SSP27-D001

The Department of the Navy, through NAVSUP Fleet Logistics Center Yokosuka, is issuing a Request for Information and Sources Sought notice under solicitation SSP27-D001 to identify qualified commercial ship repair facilities within the 7th Fleet Area of Responsibility, excluding Hawaii. The primary objective is to establish a welder qualification and sustained capability program to address capability gaps in ship repair and maintenance. The government intends to utilize Firm-Fixed-Price contracts under FAR Part 12 for commercial products and services. Interested sources must hold an active Master Ship Repair Agreement or Agreement for Boat Repair and provide a company profile including their UEI, CAGE code, and SAM.gov registration status. The technical scope is strictly limited to Shielded Metal Arc Welding (SMAW) of carbon steel for plates ranging from 1/8 inch to 1-1/2 inch thick, adhering to AWS-NAVSEA B2.1-1-302:2015 and Local Work Template 042-001. The program is structured into a Base CLIN for the qualification phase, covering welding procedure preparation, PQR certification, and sustainment planning, and a conceptual Option CLIN for future on-call structural voyage repairs. Requirements include the use of certified ABS Grade A steel plate and AWS A5.5 E7018-A1 electrodes, with mandatory NDT inspections including Class 1 Visual, Radiographic, and Magnetic Particle testing. All qualification work must be performed at the contractor's facility using regular employees and approved equipment. Responses, which must not exceed 10 pages and include a rough-order-of-magnitude cost estimate, are due by November 15, 2026, at 10:00 AM Singapore time. Clarification questions must be submitted by November 2, 2026. The government is seeking detailed information on contractor capabilities, proposed performance timelines, and the ability to provide qualified all-position SMAW welders who meet specific prerequisite documentation standards, including current eye exams and recent process maintenance logs.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1746

Solicitation SPE7L1-27-T-1746 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 37 angle valves, identified by NSN 4820002789870. This is a restricted source item designated for critical application, requiring engineering source approval by the Government Design Control Activity. The procurement references Milwaukee Valve Company part numbers 1023-001H-1 1/2 and 1023-001J-1 1/2. Delivery is required within 152 days, with the destination for both inspection and acceptance being the Distribution Depot Puget Sound in Bremerton, Washington. The contract mandates strict adherence to quality and environmental standards, including the prohibition of Class I ozone depleting chemicals and specific restrictions on mercury and mercury-containing compounds per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material preferences, and the prohibition of covered defense telecommunications equipment. The acquisition falls under NAICS code 336611.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER, HYDRAULIC ACC

Solicitation # SPE7M0-27-T-0456

Solicitation SPE7M0-27-T-0456 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one hydraulic accumulator cylinder, NSN 2090-01-450-1199. The item is to be delivered to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with a required delivery lead time of five days after order. Inspection and acceptance will occur at the destination per FAR 52.246-2. Quotations must be submitted via the DIBBS system by October 30, 2026. The contract mandates strict adherence to technical and quality standards, including Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003, and packaging requirements per RP001 and MIL-STD-2073-1E. Technical data for this item is subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific DLA authorizations. Additionally, the hardware must not contain intentionally added mercury, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Compliance with the Buy American Act and the Berry Amendment is required for quotes above the micro-purchase threshold. Evaluation includes a price preference for certified HUBZone Small Business Concerns. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and adherence to DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CONSOL Station Design and InstallationThis subcontract, titled CONSOL Station Design and Installation, involves the engineering and installation of two CONSOL stations for prime contractors on Military Sealift Command tanker projects. The scope of work requires the integration of these stations into existing vessel manifold and piping systems to facilitate ship-to-ship petroleum transfers at sea. All work must be performed in accordance with USCG and classification society standards to ensure the delivery of two fully operational and certified stations. Managed by the Department of Defense through Mschq Norfolk under NAICS code 336611, the project was posted on October 30, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

POSTED

DEADLINE

Marine Fender Installation & Hull WorkThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves the removal and installation of rubber fender systems on a 108 foot Yard Patrol Craft in Curtis Bay. The scope of work requires the removal of existing upper and lower fendering and securing bars, followed by the installation of 24 Type-D black EPDM fenders using new studs, nuts, and washers. The contractor is responsible for conducting visual, probe, and hammer test inspections of the oak shims and mounting plates to ensure structural integrity. The final deliverable is a fully installed and secured rubber fender system across the hull and transom. Responses for this opportunity are due by November 16, 2026.

POSTED

DEADLINE

NONSKID FOR NAVAL SHIPS/VESSELS

Solicitation # N4002727R0004

Solicitation N4002727R0004 is a total small business set-aside for a single Indefinite Delivery, Indefinite Quantity (IDIQ) firm fixed price contract to provide nonskid deck covering removal and replacement for U.S. Navy ships and other government vessels. The work will be performed at Naval Station Mayport, Florida, and within 50 miles of the facility. The contract spans five ordering periods from March 15, 2027, through March 14, 2032. The scope includes surface preparation meeting SSPC-SP10/NACE 2, SSPC-SP 11, and SSPC-SP12 WJ-3/NACE 5 standards, with the application of MIL-PRF-24667 Type I, IV, V, or XI nonskid materials. Award will be based on a competitive trade-off source selection process evaluating best value, with a heavy emphasis on past performance involving U.S. Navy surface combatants and price fairness. The contractor must adhere to ASQ/ANSI/ISO 9001:2015 quality standards and utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing. Key requirements include the submission of an Access Control Plan for non-U.S. citizen employees and compliance with CMMC cybersecurity levels and Buy American regulations. Liquidated damages are tailored at two percent per calendar day, capped at ten percent. Proposals are due by November 30, 2026, and must be submitted in three volumes covering price, past performance, and pre-award information.

Southeast Regional Maintenance Center

POSTED

DEADLINE

Dry-Dock: USCG ANT PUGET SOUND (55107) FY27 DD

Solicitation # 70Z04026QSBPL0015

Solicitation 70Z04026QSBPL0015 is a request for a firm-fixed-price contract for the FY27 dry-docking repairs and alterations of the USCG STA Puget Sound (55107). The project is 100% set aside for Women-Owned Small Businesses (WOSB) and is managed by the USCG Surface Forces Logistics Center in Norfolk, Virginia. The period of performance is scheduled from February 16, 2027, to July 16, 2027. The scope of work includes 40 technical work items such as hull plating inspection, ultrasonic testing, general welding, main diesel engine alignment, valve renewal, and comprehensive preservation and painting of ship structures in accordance with SFLC Standard Specifications. Award will be based on the Lowest Price Technically Acceptable (LPTA) approach, evaluating technical capability, total evaluated price, and past performance from the last two years via CPARS. Offerors must be registered with the Joint Certification Program (JCP) to access necessary vessel drawings and must provide extensive documentation, including welding certifications, proof of insurance, and AMPP or NACE certifications. Payment will be processed electronically through the Invoice Processing Platform, with 10% of the total contract price withheld until all deliverables are accepted. Quotes are due by November 5, 2026, and must remain valid for 190 days.

POSTED

DEADLINE

Solicitation # 70ZU0227QIBCT0001

Solicitation 70ZU0227QIBCT0001 is an Indefinite Delivery Requirement Contract (IDR) for the FY27 drydock availability of the USCGC KUKUI (WLB 203), a 225-foot Buoy Tender homeported in Sitka, Alaska. The project involves comprehensive drydock repairs, including extensive preservation of the hull, exterior decks, superstructure, ballast and potable water tanks, and various internal mechanical components. Performance will take place at the contractor's facility from February 2, 2027, to May 18, 2027, with an anticipated award date of January 18, 2027. This requirement is a total small business set-aside under NAICS code 336611, with a size standard of 1,300 employees. The award will be granted to the responsible quoter providing the most advantageous quote, based on a lowest-price technically acceptable basis. Evaluation factors include a pass/fail assessment of technical capability and past performance within the last three years. Contractors must provide a comprehensive execution plan for lodging and messing, facility certifications, and docking calculations in accordance with SFLC Standard Specifications 0740 and 8634. Quotes must be submitted via email by November 23, 2026, and must include a detailed technical proposal separate from the pricing sheet. Order limitations are set with a minimum order of 1,000 dollars and a maximum combination order of 7 million dollars.

POSTED

DEADLINE

NAVY NP FENDER RENEWAL

Solicitation # 70Z04027Q60514Y00

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order to perform a rubber fender system renewal on a 108-foot Yard Patrol Craft. The scope of work includes the removal of existing upper and lower fendering, securing bars, and hardware from the exterior hull and transom, followed by the installation of new rubber fenders and associated hardware. Specific requirements include replacing up to 60 linear feet of CRES securing flat bars and 75 linear feet of mounting plates and oak shims, as well as installing new studs, nuts, and washers. The government will provide 24 Type-D black EPDM fenders as government furnished material located at the Coast Guard Yard in Curtis Bay, Maryland, which also serves as the place of performance. This is a total small business set-aside conducted under FAR Part 13 Simplified Acquisition Procedures, with awards based on best value considering technical requirements, deadlines, and price. All work must be completed by December 11, 2026. Quotes must be submitted via email to Erica Gibbs by November 16, 2026, at 9:00 am Eastern. Payment will be processed via Net 30 terms through the IPP system, and no down or advanced payments will be provided. Vendors must be able to secure funding until delivery and may need to be registered in the Joint Certification Program to access export-controlled drawings.

CG-SEA-C23

POSTED

3 days ago

DEADLINE

in 14 days

AI Contract Overview

Solicitation HSCG80-16-Q-P45612 is a request for quotes for annual underwater hull cleaning services for the CGC Venturous located in St. Petersburg, Florida. The selected vendor must provide a five-person ADC certified dive team compliant with OSHA and USCG safety regulations to clean the hull, appendages, and running gear, providing digital before and after photographs of the work. The performance is scheduled for either December 10 or December 12, 2015. The contract will be awarded as a firm fixed price purchase order using simplified acquisition procedures. Eligible vendors must be registered in SAM.gov and include their DUNS number and relevant warranty information with their submission. Quotes were due by September 9, 2015, and evaluation is based on the most advantageous offer to the government, considering both price and technical capabilities.

General Info

Agency

Department Of Homeland Security → Sflc Procurement Branch 3(00040)

Contract Value

$3,000

NAICS

336611 - Ship Building and Repairing

Place of Performance

CGC VENTUROUS c/o CG Station 600 8th Avenue SE, St Petrsburg, FL, 33701, USA

Set-Aside

NONE

Awardee

SEA SUB SYSTEMS INCORPORATION

Award Issued Date

12/09/2015, 12:00:00 AM UTC

Documents

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedDec 7

Combined Synopsis

AwardedDec 9

Contract was awarded

Submission Closed

12/09/2015, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)

Contacts1 person available

OfficeBALTIMORE, MD, 21226, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)

Office AddressBALTIMORE, MD, 21226, USA

Contacts

Gloria H. SpicerContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

This combined synopsis/solicitation HSCG80-16-Q-P45612 for commercial items is prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This Request for Quotes incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-60. The NAICS is 336611, with a size standard of 1000. A. REQUIREMENT: 1. Annual Hull Cleaning requested/required. The vendor shall provide underwater cleaning of the hull; appendages, and running gear, with before/after digital photos. 2. Five ( 5) Man Dive Team - ADC certified, compliant with OSHA / USCG regulations for safe diving, and holding all required insurances. B. PERIOD of Performance requested: Thursday 12/10/2015 or Friday 12/12/2015 C. Location: Cutters Home Port CGC VENTUROUS C/O CG Station 600 8th Avenue SE St Petersburg, FL 33701-5030 D. As stated below, the provision at FAR 52.212-2, Evaluation-Commercial Items- applies with the following addenda: E. Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm fixed price contract using simplified acquisition procedures in accordance with FAR Part 13.5. 1. Please provide any warranty information. 2. Vendors MUST be registered in www.sam.gov The Government will award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforming to the solicitation will be more advantageous to the Government, price and other factors considered. Potential sources having the expertise and required capabilities are invited to submit proposals that will be considered by the agency. Quotes should be written and submitted in a legible format. Quotes must contain the contractor's DUNS Number. Quotes must be received no later than 9 December 2015 AT 10:00 A.M. EASTERN STANDARD TIME. Quotes may be e-mailed to contact@example.gov. Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications-Commercial items, with their offer or have provision FAR 52.212-3 submitted into www.sam.gov. All questions regarding this solicitation should be directed to +1 (555) 000-0000 or e-mailed to contact@example.gov.