Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

USAFA Emergency Management Equipment

Awarded

FA700026P0049Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force Academy awarded a competitive firm fixed price contract titled USAFA Emergency Management Equipment under solicitation number FA700026P0049, which was posted on July 23, 2026. This contract is a total small business set-aside under FAR 19.5, restricted exclusively to small businesses as defined by the SBA, with the NAICS code 334519 indicating it pertains to other electronic component manufacturing. The awarding agency is the Department of Defense through the office FA7000 10 Cons Lgc, located at the USAF Academy in Colorado, with the place of performance also centered at the USAF Academy in Colorado. Primary point of contact is Katlyn Blacksten, reachable at 719-333-3142 or katlyn.blacksten@us.af.mil, with Cierra Fitzgerald serving as the secondary contact at 786-994-3627 or cierra.fitzgerald.1@us.af.mil. The contract is for the procurement of emergency management equipment, likely supporting critical safety and response operations at the Academy.

General Info

U.S. Air Force Academy awards small business contract for emergency management equipment at Colorado campus.

Agency

Department Of Defense → FA7000 10 Cons LgcView Agency

Contract Value

$207,043.13

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

USAF Academy, CO, USA

Set-Aside

SBA

Awardee

SAFEWARE INCView Profile

Award Issued Date

07/23/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedJul 23

Award Notice

AwardedJul 23

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA7000 10 Cons Lgc

Contacts2 people available

OfficeUSAF ACADEMY, CO, 80840-2303, USA

Organization / Agency

Department Of Defense → FA7000 10 Cons Lgc

View Agency Profile

Office AddressUSAF ACADEMY, CO, 80840-2303, USA

Contacts

Katlyn Blacksten

contact@example.gov

+1 (555) 000-0000

Cierra Fitzgerald

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

The contract awarded was a competitive firm fixed price contract.

Similar Contracts

Same NAICS industry code

METER, SPECIAL SCALEThe contract is for the procurement of six special scale meters identified by NSN 6625-01-503-0148 under solicitation number SPE7M1-26-T-233L, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a short procurement window for potential vendors to submit bids. The item is categorized as a federal requirement with no set-aside designation, meaning any qualified contractor may compete for the award. The place of performance and point of contact information are not specified, suggesting the delivery location and coordination details will be determined post-award. The offering is accessible through the DIBBS system for authorized participants to review and respond to the request.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

INDICATOR, CARBON MONOXThe contract pertains to the procurement of two INDICATOR, CARBON MONOX units with NSN/Part Number 6665-20-001-8480, issued under solicitation number SPE7M1-26-T-232H by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a brief window for prospective vendors to submit proposals. The item is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not provided, though the contracting agency is based in the United States. Interested parties must respond via the official DIBBS portal using the provided UI link before the deadline to be considered for award.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

TIMER, INTERVALThe contract is for the procurement of two Interval Timers with the NSN/Part Number 6645-01-212-9474, solicited under SPE4A6-26-T-09PY by the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is classified as a federal acquisition action with no set-aside designation applied. The item is intended for use by a federal entity, though the specific place of performance and point of contact details are not provided. All inquiries and submissions must be directed through the official DIBBS portal linked in the solicitation, where full documentation and requirements are available to potential respondents.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

SYNCHRO, RECEIVERA solicitation has been issued by the Defense Logistics Agency under the Department of Defense for nine Synchro, Receiver units identified by NSN 5990-00-234-8944. The solicitation, numbered SPE7M5-26-T-353J, was posted on July 26, 2026, with a response deadline of August 6, 2026. The procurement is classified as a federal opportunity with no specific set-aside designation, indicating it is open to all eligible contractors. The place of performance and office address details are not specified, but the contracting activity is based in the United States. Interested parties must submit responses through the official DIBBS platform prior to the deadline to be considered for award.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

SCALE, WEIGHINGThe contract solicitation is for a scale weighing device identified by NSN 6670-01-657-2981, with a single unit requested under purchase order 7017574019. Issued by the Defense Logistics Agency under the Department of Defense, the solicitation bears the number SPE4A6-26-T-09RE and was posted on July 26, 2026, with responses due by August 3, 2026. The procurement is classified as a federal solicitation with no specific set-aside type designated, indicating it is open to all eligible contractors. The place of performance and office address details are not specified, but the contract is administered within the United States. All technical and logistical requirements for the scale are expected to be defined within the full solicitation document accessible via the provided DIBBS portal link.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

INDICATOR, DIGITAL DThe contract solicitation is for two digital indicator units identified by NSN 6625-01-562-4580, issued under solicitation number SPE7M1-26-T-232W by the Defense Logistics Agency under the Department of Defense. The request, identified by purchase request number 7017528056, is intended to fulfill a federal procurement need and is open for responses through August 6, 2026, with submissions due by 5:00 PM Eastern Time. The solicitation was posted on July 26, 2026, and no set-aside classification or NAICS code is specified, indicating it is open to all eligible contractors. The place of performance and agency office address details are not provided, but the contract is administered under U.S. federal jurisdiction. Interested parties can access further details via the provided DIBBS portal link.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

66--TRANSMITTER,RATE OFThe U.S. Department of Defense, through DLA Aviation, is seeking quotes for 20 units of NSN 6680015395947, a TRANSMITTER, RATE OF, to be delivered to W1A8 DLA DISTRIBUTION within 89 days after award. The procurement is conducted under solicitation SPE4A526T309D, which is a combined solicitation issued as a Request for Quote with no hard copies available. Only electronic submissions are accepted, and all responsible sources may respond if their quotes are received prior to the deadline of August 3, 2026. The approved source for this item is specified as 1MU21 60380G523N REV GG, though no specifications, plans, or drawings are provided. This acquisition is set aside entirely for small businesses under the SBA program, with the NAICS code 334519 indicating it falls under other communications equipment manufacturing. The contracting office is located in Richmond, Virginia, and all inquiries must be directed via email to the point of contact listed in the solicitation document, accessible through the provided SAM.gov link.

POSTED

about 10 hours ago

DEADLINE

66--CAISSON GAGEThe government intends to procure 70 units of NSN 3H-6685-017341193-D4, identified as a CAISSON GAGE, under a non-competitive solicitation authorized under FAR 6.302-1, with delivery directed to the Portsmouth Naval Shipyard in Kittery, Maine. All interested parties may submit proposals, quotations, or capability statements within 45 days of the synopsis publication or 30 days if under an existing Basic Ordering Agreement, but this notice does not constitute a request for competitive bids. The Government retains full discretion to determine whether to proceed with a sole-source award based on responses received. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support, with the primary point of contact being Noelle M. Smith, available by phone or email through the official Navy domain. The solicitation was posted on July 25, 2026, and responses are due by August 10, 2026, with the contracting office located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Manufacturing of Control Dial UnitsThe contract entails the precise manufacture and delivery of 33 military-specification control dial units identified by NSN 5355-01-324-4564, with stringent requirements for quality assurance and quality control throughout the production process. Full traceability of materials, components, and manufacturing steps is mandatory, ensuring adherence to MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for labeling and marking standards. All units must meet exacting military performance and durability specifications without deviation, and documentation must accompany each lot to verify compliance at every stage. The work is classified as a subcontract under NAICS code 334519, indicating specialized manufacturing of other communication equipment, and is managed by the Department of Defense's Land Supply Chain organization. The solicitation opened on July 24, 2026, with a firm deadline for responses set for July 29, 2026, leaving a narrow window for qualified manufacturers to submit proposals. There is no set-aside designation specified, meaning eligibility is open to all qualified suppliers regardless of business size or status. Performance location details are not provided, implying flexibility in manufacturing site selection as long as all deliverables meet the required standards and timelines. Access to the full solicitation details is available through the DIBBS portal using the provided link, and all submissions must align with the Defense Logistics Agency’s procedural requirements for military procurement. Delivery timelines and inspection protocols are implied to be governed by the referenced military standards, with non-compliance resulting in rejection of the entire lot.

LAND SUPPLY CHAIN

POSTED

DEADLINE

THERMOMETER, INDICATINGThe contract issued under solicitation number SPE4A6-26-T-07BM by the ASC Commodities Division of the Department of Defense seeks three indicating capillary tube thermometers with bulb, identified by NSN 6685-01-253-0784 and manufacturer part number 90C01-6383. Delivery is required 97 days after order placement, with a need ship date of October 30, 2026, and shall be made FOB origin to the designated receiving facility in Tracy, California. The item is classified as a critical application item, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point, with full compliance required to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a special designation indicating “Delicate instrument.” The packaging must adhere to DLA’s RP001 requirements and explicitly prohibit the use of mercury or mercury compounds in preservation, packaging, and marking, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents—all of which must include a secondary containment boundary per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; acceptance criteria require zero non-conformances unless otherwise specified. Attributes are to be assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The contractor must comply with extensive regulatory requirements including DFARS 252.223-7001 for hazardous material labeling, applicable OSHA Hazard Communication standards, and mandatory electronic submission via WAWF for payment and receiving reports. All offers must be submitted electronically through the DIBBS portal, and the acquisition falls under simplified procedures with no bidset available. Compliance with FAR clauses on trafficking, employment eligibility, sustainable products, cybersecurity, mercury prohibition, whistleblower rights, small business representation, and prohibited procurement from communist Chinese military companies is mandatory. The contractor must also provide safety data sheets, adhere to unique entity identifier and CAGE code requirements, and ensure all hardware avoids unintended contact with mercury, except as explicitly permitted under strict containment protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

GAGE, PRESSURE, DIAL INDThe contract is for the procurement of 13 units of a pressure dial indicating gage, identified by NSN 6685012372558 and manufacturer part number EA24-3PPP-EWB0, under solicitation SPE4A5-26-T-292Y, with a total contract value of $169.000 at $13.000 per unit. Delivery is scheduled for 158 days after the order date, with a required ship date of December 30, 2026, and FOB origin terms. The item must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and RP001 DLA Packaging Requirements, including preservation method 10 (clng/dry:1), unit container E5, outer protective item M, and pack code U. All items must be marked in accordance with MIL-STD-129, including a special marking code of 05 for delicate instruments and a temporary tag affixed to each unit that displays the contract number, NSN, manufacturer’s part number, and rated accuracy, if available. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in such cases, portable devices must include a second boundary of containment as per NAVSEA 5100-003D. Sampling and quality acceptance follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements. The contractor must comply with cybersecurity and safeguarding provisions including 252.204-7012 and 252.240-7997, and must use Wide Area WorkFlow (WAWF) for invoicing. Contract clauses cover payment, changes, inspection, default, safeguarding of information, and prohibition of unauthorized obligations, with

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

METER, FLOW RATE INDThe contract pertains to the procurement of one flow rate indicator meter with NSN 6680-01-398-1885 under solicitation SPE4A6-26-T-06ZQ, issued by the ASC Commodities Division of the Department of Defense for delivery to Whiteman Air Force Base, Missouri. Delivery is required within 20 days after award, with FOB origin terms placing responsibility on the contractor for packaging, labeling, and transportation to the point of origin, where title and risk transfer to the government. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which override applicable industry standards like ASTM D3951 where conflicts arise. Packaging and marking must adhere to MIL-STD-129, including barcoding, hazard labeling per OSHA’s Hazard Communication Standard, and adherence to RP001 for DLA-specific packaging. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise specified, and assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. The supplier must comply with DFARS and FAR clause deviations effective February 2026, including cybersecurity requirements under NIST SP 800-171, prohibitions on covered defense telecommunications, hazardous material reporting, and restrictions on hexavalent chromium. Electronic invoicing through Wide Area Workflow (WAWF) is mandatory, and all subcontracting activity for commercial products or services must follow deviation-included clauses. Offerors must provide valid UEI and CAGE codes and affirm representations regarding small business status, socioeconomic eligibility, and compliance with trafficking, employment eligibility, and sustainable product requirements. All proposals must be submitted electronically via DIBBS by the deadline specified, in alignment with the DLA Master Solicitation Revision 105, and must include completed representations, certifications, and technical documentation. The contract includes no options, extended pricing, or defined contract value beyond the single line item at $1.000, and administrative details such as payment office, COR, or DoDAAC will be finalized upon award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FA7000 10 Cons Lgc

Same awarding agency

Item Unique Identification (IUID) Marking and ReportingThis contract requires the application of ISO/IEC 16022-compliant Data Matrix markings to systems in accordance with MIL-STD-130 standards for Item Unique Identification (IUID). The successful bidder must ensure that all required items are permanently marked with unique, machine-readable Data Matrix codes that meet government specifications for durability, readability, and data content. Alongside physical marking, the contractor is obligated to accurately submit the corresponding IUID data to the Wide Area Workflow (WAWF) system to ensure full compliance with Department of Defense traceability and inventory requirements. The work must be performed at the USAF Academy location, zip code 80840, and the subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program as defined under FAR 19.5, with the NAICS code 811411 indicating repair and maintenance services. The opportunity was posted on July 23, 2026, and responses are due by August 6, 2026.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Specialty Component Supplier (NI-9239 Modules, cDAQ Chassis)The contract requires the supply of genuine National Instruments NI-9239 modules and cDAQ chassis for integration into a Department of Defense data acquisition system, with performance to be conducted at the USAF Academy in Colorado, 80840. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, as defined under FAR 19.5 and NAICS code 423490. The solicitation was posted on July 23, 2026, with proposals due by August 6, 2026, at 8:00 PM Eastern Time, and the procuring activity is listed under FA7000 10 Cons Lgc, a Defense Department office. All components must be authentic National Instruments products to ensure compatibility and reliability within the military-grade data acquisition environment.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

On-Site Commissioning and Operator TrainingThe contract requires the delivery and installation of a system at the United States Air Force Academy located in Colorado with a zip code of 80840, followed by comprehensive checkout testing to ensure full operational functionality. On-site operator training is a mandatory component, focusing on the proper use, routine maintenance, and operational procedures necessary for effective system performance. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to bid, and it falls under the NAICS code 541512 for computer systems design services. The solicitation was posted on July 23, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense under the agency designation FA7000 10 Cons Lgc. All work must be performed at the specified location, and no remote or off-site alternatives are permitted for training or installation.

Computer Systems Design Services

POSTED

DEADLINE

Pre-Test Validation and Calibration ServicesThe contract requires the performance of pre-test functional validation and calibration of a force balance system installed in the Ludwig Tube, under simulated Mach 6 aerodynamic conditions, with the explicit requirement to verify consistent performance over an 80 millisecond duration. The work focuses on ensuring the force balance accurately measures and responds to dynamic loads in a hypersonic test environment, which is critical for reliable experimental data collection. This service is essential for validating instrument integrity prior to full-scale testing and must be completed to precise technical standards under extreme conditions. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 541380 indicating it falls within the category of other scientific and technical consulting services. The opportunity was posted on July 23, 2026, with a response deadline of August 6, 2026. The place of performance is located at the USAF Academy in Colorado, with the contracting activity under the Department of Defense, specifically the FA7000 10 Cons Lgc organization. All work must be executed by a certified small business, and the successful offeror will be expected to deliver verified calibration data and validation reports meeting the specified technical requirements for the hypersonic test facility.

Testing Laboratories and Services

POSTED

DEADLINE

Data Acquisition System Integration (NI LabView & cDAQ)The contract requires integration of a force balance system with an NI cDAQ chassis and NI-9239 modules to enable precise real-time data acquisition with a strict latency requirement of 80 milliseconds. The work involves configuring LabVIEW software to manage signal conditioning, data acquisition, and system synchronization across the hardware components, ensuring reliable and timely collection of force measurements under dynamic conditions. All system components must be properly calibrated and tested to meet performance standards in a high-fidelity testing environment. Performance is to be carried out at the USAF Academy location in Colorado Springs with a zip code of 80840. The contract is designated as a Total Small Business Set-Aside under NAICS code 541330, indicating it is reserved exclusively for small business concerns. The solicitation was posted on July 23, 2026, with a response deadline of August 6, 2026. The contracting entity is the Department of Defense under the FA7000 10 Cons Lgc office, and the work supports defense-related research and testing activities, requiring adherence to federal acquisition guidelines and technical precision in real-time data capture systems.

Engineering Services

POSTED

DEADLINE

High-Precision Force Balance Design and FabricationA custom six-component force balance with a one-inch outer diameter is to be designed and manufactured for aerospace applications, specifically to operate under Mach 6 conditions while measuring forces and moments with a response time no longer than 80 milliseconds. The project requires high precision engineering to ensure accurate data collection in extreme aerodynamic environments, likely supporting flight testing or wind tunnel experimentation at the USAF Academy. The contract is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 334511 for navigation, measuring, electromedical, and control instruments manufacturing. The solicitation was posted on July 23, 2026, with proposals due by August 6, 2026, and the work will be performed in Colorado at the specified facility. The Department of Defense is the overseeing agency, and the contract is posted under a federal procurement system for transparent submission and evaluation.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Control Software and Data Acquisition SuiteThe contract calls for the development and supply of specialized software to support ENDOR experiments, focusing on automated tuning, precise pulse sequence control, and high-fidelity 2D and 3D data acquisition. This software suite is critical for enabling advanced electron nuclear double resonance research, requiring robust algorithmic control over experimental parameters and real-time data handling capabilities to ensure accuracy and repeatability in magnetic resonance measurements. The solution must integrate seamlessly with existing laboratory instrumentation and support scalability for future experiment modifications. The contract is classified as a subcontract under NAICS code 511210, issued by the Department of Defense through the FA7000 10 Cons Lgc office, with performance required at the USAF Academy in Colorado, ZIP 80840. Proposals are due by July 29, 2026, with the solicitation posted on July 23, 2026. The project seeks a vendor with demonstrated expertise in scientific software development, particularly in the domain of magnetic resonance systems, capable of delivering a secure, reliable, and user-configurable platform that meets rigorous military and research standards. While no set-aside provisions are specified, the technical complexity demands a capable contractor with a proven track record in defense-related instrumentation software.

Software Publishers

POSTED

DEADLINE

Cryogenic Sample Probe and Interface DevelopmentThe contract calls for the design and supply of a cryogenic-compatible ENDOR sample probe specifically engineered for low-temperature spin relaxation measurements, with seamless integration into existing laboratory infrastructure. The probe must maintain precise operational stability under extreme cryogenic conditions while ensuring compatibility with current spectrometer systems and thermal management workflows. All components must be meticulously engineered to withstand repeated thermal cycling without degradation in performance, signal integrity, or mechanical reliability. The work is to be performed at the US Air Force Academy in Colorado Springs, Colorado, under a subcontract arrangement issued by the Department of Defense through the FA7000 10 Cons Lgc office. The solicitation was posted on July 23, 2026, with a firm deadline for responses on July 29, 2026, and falls under the NAICS code 332721 for instrument manufacturing. The project demands specialized expertise in low-temperature physics, RF engineering, and materials science to deliver a probe that meets exacting technical standards for precision spin resonance measurements in defense-relevant research environments.

Precision Turned Product Manufacturing

POSTED

DEADLINE

RF Power Amplifier Supply (150W, 0.1–100 MHz)A broadband RF power amplifier capable of delivering at least 150 watts of output power across the frequency range of 0.1 to 100 MHz is being procured for use in ENDOR signal excitation, a specialized application requiring precise and high-power radio frequency capabilities. The amplifier must meet stringent performance standards to ensure reliable operation within this broad bandwidth, supporting advanced electronic detection techniques in research or operational environments. The requirement is issued as a subcontract under NAICS code 334310, which classifies it within the communications equipment manufacturing sector, indicating the technical sophistication and industrial expertise needed for successful fulfillment. The solicitation was posted on July 23, 2026, with a response deadline of July 29, 2026, providing a narrow six-day window for interested parties to submit proposals. The place of performance is designated as the US Air Force Academy in Colorado Springs, Colorado, with a ZIP code of 80840, suggesting the equipment will be integrated into a military or defense-related research facility operated by the Department of Defense under the FA7000 10 Cons Lgc organization. There is no set-aside designation specified, meaning the contract is open to all eligible contractors without preference for small businesses or other categories, and no point of contact is listed, implying that all inquiries must be handled through the official SAM.gov portal linked in the posting.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Arbitrary Waveform Generator (AWG) SupplyA high-performance arbitrary waveform generator requiring a minimum sampling rate of 1.0 Gsamples per second, 2 gigabytes of memory, and 14-bit resolution is being procured for precise pulse control in an ENDOR system. This subcontract, issued under NAICS code 334511 by the Department of Defense through the FA7000 10 Cons Lgc office, is intended for delivery and integration at the US Air Force Academy with a zip code of 80840. The solicitation was posted on July 23, 2026, and requires all responses to be submitted no later than 8:00 PM on July 29, 2026. The equipment must meet strict technical specifications to ensure compatibility and optimal performance within the ENDOR experimental setup, and delivery is expected to support ongoing defense-related research operations at the specified location.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

ENDOR System Integration and DeliveryA commercially available ENDOR system is being procured for full integration, testing, and delivery to perform spin relaxation measurements in cryogenic materials. The contract requires complete system calibration and preparation for FOB destination delivery, ensuring the equipment is fully operational upon arrival at the designated location. This effort supports advanced materials research by enabling precise spin dynamics analysis under extreme low-temperature conditions, with the place of performance specified as the USAF Academy in Colorado Springs, Colorado, at ZIP code 80840. The opportunity is structured as a subcontract under NAICS code 334516, which relates to the manufacturing of other instruments and related products, and is managed by the Department of Defense under the FA7000 10 Cons Lgc organization. Proposals must be submitted by the deadline of July 29, 2026, with the solicitation posted on July 23, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

USAFA Mach 6 Ludwieg Tube (M6LT) Force BalanceThe U.S. Air Force Academy is seeking a firm-fixed-price purchase order for a force balance system to support the Mach 6 Ludwig Tube facility within the Department of Aeronautics, with all requirements detailed in Attachment 1. This acquisition is strictly a 100% small business set-aside, open only to eligible and responsible small businesses, and no separate written solicitation will be issued. The requirement is classified as a commercial item, and compliance with the Buy American Statute is mandatory; offerors must submit a completed Buy American Balance of Payments Program Certificate and clearly identify the country of origin, as domestic products are preferred under the statute unless exceptions apply. Foreign offers will be evaluated under specific defense acquisition regulations for cost comparison and compliance. To be considered, offers must be submitted via email by 2:00 p.m. MDT on August 6, 2026, and include a completed and signed SF-1449 with a valid six-month price commitment, technical capability documentation, an authorized reseller certificate if applicable, active SAM.gov registration with all required FAR and DFARS certifications including security compliance, and the mandatory Buy American Certificate. Evaluation follows a phased approach: quotes are first ranked by lowest price, then only the top three are assessed for technical acceptability and past performance according to the standards in Attachment 1 and FAR 52.212-2. Technical viability is evaluated on an acceptable/unacceptable basis, with mandatory security and supply chain reviews conducted under FAR 52.240-91. Awardees will be selected based on best value, determined by price, past performance, and technical capability, with additional consideration given to Supplier Performance Risk System scores. Funds are not currently available, and the government reserves the right to cancel the solicitation without liability for any offeror costs.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE