Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Cybersecurity Research & Feasibility Study for High-Altitude SWaP Emitters

Active

Federal

Response Deadline08/09/2028, 10:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves conducting advanced technical research and feasibility analysis focused on radio frequency and electromagnetic interference (RF/EMI) signatures emitted by low Size, Weight, and Power (SWaP) devices during high-altitude flights. The work includes the detection of these emissions and the development of strategies to mitigate their impact, ensuring improved operational security and performance in aerospace environments. The research aims to address challenges associated with the unique conditions presented by high-altitude operations and low SWaP emitters, which are critical for defense and cybersecurity applications. Issued by the Department of Defense under the subcontract type with NAICS code 541715, the contract is designated for performance primarily at the USAF Academy. The solicitation was posted in March 2026, with responses due by August 2028, allowing ample time for comprehensive proposals. This effort supports ongoing initiatives to enhance electromagnetic security and resilience against potential vulnerabilities in airborne technologies, positioning it as a strategic investment in national defense capabilities.

General Info

Conduct advanced RF/EMI research on low SWaP devices in high-altitude flights for defense.

Agency

Department Of Defense → FA7000 10 Cons LgcView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

USAF Academy, CO, 80840, USA

Set-Aside

NONE

Documents

This scope was carved out of FA700023SC001.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Software Defined - Wide Area Network

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMar 4

subcontract

Response DeadlineAug 9

Submission deadline

Response Deadline

08/09/2028, 10:30:00 PM UTCin almost 2 years

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA7000 10 Cons Lgc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA7000 10 Cons Lgc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct technical research and feasibility analysis on RF/EMI signatures from low SWaP emitters during high-altitude flights, including detection and mitigation strategies.

Similar Contracts

Same NAICS industry code

Commercial Solutions Opening for the Defense Industrial Base

Solicitation # N0002326SDIB1

The Department of the Navy, through the Deputy Assistant Secretary of the Navy for the Defense Industrial Base, is issuing a Commercial Solutions Opening solicitation under solicitation number N0002326SDIB1. This initiative seeks prototype projects from traditional and nontraditional defense contractors, commercial firms, and academic institutions to strengthen, modernize, and sustain the Defense Industrial Base. The primary goal is to improve the mission effectiveness, production capacity, and resilience of Navy platforms, systems, and infrastructure through flexible, competitive agreements. Interested parties are encouraged to submit solution briefs aligned with specific Areas of Interest, which include advanced manufacturing, supply chain resilience, workforce development, contested logistics, and data analytics. This streamlined procedure utilizes other transaction authority to identify and select innovative solutions that accelerate the delivery of warfighting capabilities. The effort is managed by the Naval Supply Systems Command and focuses on diverse prototype projects that support the broader strategic priorities of the Department of the Navy.

Naval Supply Systems Command

POSTED

about 23 hours ago

DEADLINE

ETHEREAL FORGE: Call for Participation – Test & Evaluation of Advanced Electromagnetic Warfare (EW) Capabilities

Solicitation # FA221721389XX

The ETHEREAL FORGE initiative, managed by the Department of Defense under solicitation FA221721389XX, seeks to test and evaluate advanced Electromagnetic Warfare capabilities that conform to the Modular Open Systems Approach. The primary goal is to assess modular hardware and software components against realistic threats to accelerate the fielding of next-generation Electromagnetic Spectrum Operations systems. By utilizing open standards such as SOSA, CMOSS, FACE, VITA, and AMS-GRA, the program aims to create a rapid, iterative process for sensing and engaging within the electromagnetic environment. Key outcomes of this effort include conducting Technology Readiness Assessments for candidate software and hardware, generating data to inform future budgeting and acquisition cycles, and developing prototype infrastructure to streamline testing. This special notice was posted on August 27, 2026, with a response deadline of October 10, 2026. The project is centered at Offutt Air Force Base in Nebraska and is designed to bridge the gap between capability development and final integration by program offices.

FA2217 Cocom C2 Aflcmc/hbc

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Federal Protective Service (FPS) Network Scanning Tool

Solicitation # 70RSAT26RFI000028

The Department of Homeland Security Science and Technology Directorate, through the Homeland Security Advanced Research Projects Agency, is conducting market research to develop a portable, agentless network scanning tool for the Federal Protective Service. The objective is to create a solution capable of real-time discovery and inventory of Information Technology, Internet of Things, and Operational Technology assets, specifically for use in environments lacking centralized monitoring. The selected contractor will be responsible for the design, development, testing, and delivery of the tool, including a user interface, comprehensive documentation, and training materials. The tool must integrate with existing inventory and reporting systems and comply with federal cybersecurity standards such as FISMA and NIST. The project is estimated at a total cost of 2,000,000 dollars with a performance period of twelve months from the date of award. While the tool must be durable and portable, the government has clarified that a ruggedized transport case is sufficient for the electronic components, and individual components do not require independent ruggedization. This effort is currently in the Request for Information stage under NAICS code 541715 to identify qualified sources and evaluate technical capabilities, including the use of Best-in-Class vehicles. Access to sensitive or classified information is not required for the execution of this statement of work.

Sci Technology Acq Division

POSTED

about 23 hours ago

DEADLINE

in about 10 hours

Stryker Family of Vehicles Commercial Solutions Opening

Solicitation # W912CH-26-S-0010

The Commercial Solutions Opening (CSO) under solicitation W912CH-26-S-0010, issued by the Army Contracting Command – Detroit Arsenal for the Program Manager Stryker Brigade Combat Team, is designed to accelerate the acquisition of innovative commercial technologies to modernize the Stryker Family of Vehicles. This CSO remains open until May 7, 2031, but companies cannot submit proposals directly in response to this announcement; instead, they must monitor SAM.gov for individual Areas of Interest (AoIs), which serve as the only authorized portals for proposal submissions. Each AoI will define specific needs, deadlines, and delivery requirements, with proposals evaluated under a streamlined, multi-phase process: submission of a Solution Brief, optional presentation or pitch, and finally, a full Commercial Solution Proposal. Proposals must be submitted in two separate volumes—Technical and Price—with the Technical Volume capped at 20 pages and the Solution Brief limited to either five pages or fifteen slides. All submissions must be unclassified, in Word or PDF format, and submitted exclusively through the active AoI posting on SAM.gov. Awards under this CSO may take the form of FAR Part 12 Fixed-Price contracts or Other Transaction Authority (OTA) agreements under 10 U.S.C. 4022, with no reimbursement for proposal development costs. The evaluation is non-LPTA and based on a trade-off approach considering eight factors in descending order of importance: solution relevance, technical merit, innovation level, technical risk, cost risk, schedule risk, company viability, and intellectual property/data rights risk. Offerors must have a valid Unique Entity ID and be registered in SAM.gov, and must submit a Warranties and Representations form to establish eligibility. While no socioeconomic certifications are required, foreign-owned entities must be able to obtain necessary security clearances to access prescribed information. Payment will be processed through WAWF, and the contracting officer contacts are Marta Furman and Taylor Ferguson. The Government may negotiate follow-on production contracts without competition after successful prototype development, and no formal contract value or line-item pricing is specified in this solicitation, as pricing and scope are defined per AoI. The place of performance and delivery terms vary by AoI, with Michigan's Detroit Arsenal area serving as the contracting office location.

Department Of The Army

POSTED

about 23 hours ago

DEADLINE

in over 4 years

Synthetic Training Environment (STE) Virtual Software (VSW)

Solicitation # STE-VSW-26-0006

The Army Contracting Command Aberdeen Proving Grounds Orlando Division is issuing a Call for Solutions under the Army Open Solicitation for the Synthetic Training Environment Virtual Software. The primary objective is to identify a cost-effective and technically sound solution that provides a doctrinal gate to live fire, a combined arms environment, full mission command concurrency, and an open system architecture with published SDKs and APIs for rapid integration. The acquisition process begins with a draft posting on August 27, 2026, followed by a final posting on September 10, 2026. Key milestones include an Industry Day in Orlando from September 15 to 17, with final solutions due by September 21, 2026. Following a down-select and demonstration phase in October, the government anticipates awarding contracts for Lots 1 through 5 by November 6, 2026.

W6QK Acc-Apg-Orlando

POSTED

about 23 hours ago

DEADLINE

Industry Engagement – Common Autonomous Multi-Domain Launcher (CAML) Strategy Overview

Solicitation # W50RAJ26IECAML

The Department of Defense, through the Rapid Capabilities Critical Technology Office, has issued a special notice for an industry engagement session regarding the Common Autonomous Multi-Domain Launcher strategy. This session is designed to provide a programmatic overview of the government acquisition strategy, explain the rationale for recent changes, and clarify the relationship between previous and current CAML efforts. The event will take place in Redstone Arsenal, Alabama, with a response deadline of August 31, 2026. This engagement is strictly an informational session and does not serve as a Request for Information or a Request for Solutions Brief. Specifically, the session will not address details, evaluation criteria, or individual submissions related to the open Request for Solutions Brief W50RAJ269A014 concerning the 36K Lbs Variant, Leader Prototype, and Autonomy Command and Control integration. Primary contact for this initiative is Abbie Chatelain.

Rapid Capabilities Critical Technology Ofc

POSTED

about 23 hours ago

DEADLINE

N66001-26-R-0030 - Academic Research MAC

Solicitation # N6600126R0030

Naval Information Warfare Center Pacific plans to issue a solicitation exclusively for research and development engineering services from eligible educational institutions under a multiple-award indefinite-delivery/indefinite-quantity contract. The procurement, identified as N66001-26-R-0030, will replace previous contracts previously held under N66001-21-D-0041, N66001-21-D-0042, and N66001-21-D-0043, and will use cost-reimbursement, no-fee contract line items. Work will primarily be conducted at the universities’ own facilities, though some efforts may occur at NIWC Pacific or other government or contractor sites as needed. The contract structure includes a two-year base period with a one three-year option, resulting in a potential five-year ordering period. The applicable NAICS code is 541715 and the Product Service Code is AC33. The Request for Proposals is expected to be released around 10 August 2026, with award decisions anticipated by October 2026. No hard copy solicitations will be distributed, and all information will be available electronically. Questions should be directed to Contract Specialist Ashley Prokop at the provided Navy email address. The solicitation was posted on 21 July 2026 with a response deadline of 28 July 2026.

POSTED

about 23 hours ago

DEADLINE

Professional and Technical Support Services

Solicitation # HH082520260001

Washington Headquarters Services, Acquisition Directorate, on behalf of the Office of the Undersecretary of War for Research and Engineering ManTech Program, intends to award a short-term, sole source bridge contract to the incumbent contractor, PM2 Strategies, LLC. This contract provides technical, professional, administrative, management, policy, and operational support for the Engineering Research, Development and Strategic Planning for Industrial Base Collaboration and Transition for OSD ManTech and the Technology Innovation Industrial Base. The services support both the OUSW(R&E) and the Air Force Research Laboratory Manufacturing and Industrial Technologies Division. The bridge contract is designed to maintain continuity of services while a follow-on requirement is in source selection. The total period of performance is scheduled from October 6, 2026, to April 5, 2027, consisting of a two-month base period and a four-month option period. This award is being made under FAR authorities restricting competition due to the likelihood that awarding to any other source would result in substantial duplication of costs to the government.

Washington Headquarters Services

POSTED

about 23 hours ago

DEADLINE

Army Advanced Manufacturing (AdvM) Commercial Solutions Opening (CSO)

Solicitation # W9124P26SC001

The Army Advanced Manufacturing (AdvM) Commercial Solutions Opening (CSO), identified by solicitation number W9124P26SC001, is an ongoing, open solicitation managed by the Army Contracting Command – Redstone Arsenal to identify and acquire innovative commercial technologies that enhance manufacturing, maintenance, and sustainment capabilities across the Army’s Organic Industrial Base and at the tactical edge. This initiative leverages flexible acquisition authorities including 10 U.S.C. § 3458, § 4022, DFARS RFO 212.70, and the Employee Stock Ownership Pilot Program to support rapid prototyping and fielding of advanced manufacturing solutions in areas such as additive manufacturing, digital twins, Industrial Internet of Things, cybersecurity integration, and process qualification. Proposals are submitted through a two-phase process: Phase 1 requires a one-page Quad Chart and a five-page White Paper formatted in 12-point Times New Roman, single-spaced, with one-inch margins, submitted via email to the designated mailbox. While the CSO remains continuously open, specific Calls for Solutions will have defined deadlines, and only commercially available solutions meeting the defined Areas of Interest are considered. The Government retains the right to issue amendments, which will be highlighted in yellow for transparency, and does not guarantee that any Request for Information will lead to a follow-on opportunity. Award decisions are based on a best-value trade-off process, evaluating technical merit and relevance first, followed by innovation and uniqueness, company viability—including corporate experience, personnel qualifications, and data rights identification—and price and affordability. Non-cost factors collectively carry significantly more weight than cost, making this a non-LPTA process. All awards will be made as Firm-Fixed-Price contracts under DFARS RFO 212.7002(b), with potential award instruments including IDIQ contracts, Other Transaction Agreements, or direct purchase orders. Offerors must be registered in SAM.gov and hold an active Unique Entity ID, but no socioeconomic set-asides or size status certifications are mandated. Submission costs are not reimbursable, and proposals must comply with DFARS data rights clauses, particularly regarding intellectual property and technical data disclosure. Performance will be centered at Redstone Arsenal, Alabama, with operational delivery targeted to the OIB and tactical locations. No packaging, marking, or inspection standards are specified beyond the requirement that proposed solutions must demonstrate validated prototypes, qualified manufacturing processes, or commercialized technologies aligned with Army modernization priorities. The Government conducts all evaluation

POSTED

about 23 hours ago

DEADLINE

ARMY OPEN SOLICITATION (AOS)

Solicitation # W9128Z-25-S-A002

The Army Open Solicitation (AOS), identified by solicitation number W9128Z-25-S-A002, is an indefinite, open solicitation issued by the U.S. Army Contracting Command – Aberdeen Proving Ground to rapidly acquire innovative commercial technologies and research-driven solutions across all Army mission areas. Designed to revitalizing the industrial base and enhancing Warfighter lethality, the solicitation leverages a flexible acquisition framework under multiple FAR, DFARS, and U.S. Code authorities, including Other Transactions, Commercial Solutions Opening, and prototype authorities. It supports both Active Capability Gap submissions and periodic Calls for Solutions, with responses evaluated based on technical merit, feasibility, schedule, price estimation, viability, and desirability using a trade-off approach rather than lowest price technically acceptable. The solicitation remains open indefinitely until canceled, with recent amendments through March 2026 expanding and clarifying Army Example Areas, refining submission procedures, and updating contracting information including Active Capability Gap mailboxes. All submissions must adhere to strict formatting requirements, including a single PDF submission not exceeding five pages or fifteen slides, with mandatory inclusion of an executive summary, company information, and rough order of magnitude cost and schedule estimates. Offerors must be registered in SAM, use WAWF for invoicing, and comply with stringent data storage and security requirements, including U.S.-only data hosting and full organizational conflict of interest disclosures. The solicitation encourages participation from small businesses, nontraditional defense contractors, and nonprofit research institutions, with specific certifications required through the Affirmation of Business Status Certification. Performance may occur at government facilities including Aberdeen Proving Ground and other CONUS/OCONUS locations as directed, with award timing anticipated in fiscal year 2026, and support expected through 2032. No fixed contract value is provided, as pricing is determined through competitive evaluation of commercial proposals under the solicitation's open-ended structure.

W6QK Acc-Apg Contr Ctr

POSTED

about 23 hours ago

DEADLINE

Notice of Intent to Sole Source – George Washington University

Solicitation # 26-008606

The National Institutes of Health Clinical Center intends to award a firm fixed price sole source purchase order to George Washington University to increase epidemiologist hours under existing contract 75N98026P01031. This action is necessary to address workload requirements identified during the first project year, specifically regarding study design, protocol development, and analytic framework formulation, which required more effort than originally budgeted to maintain scientific rigor and grant compliance. The procurement is being conducted under FAR Part 13 Simplified Acquisition Procedures, allowing for a sole source award as the government determines only one source is reasonably available. The work will be performed in Bethesda, Maryland, under NAICS code 541715 and Product Service Code AJ52. Interested parties may submit capabilities or comments to the contract specialist by September 3, 2026.

National Institutes Of Health - Cc

POSTED

about 23 hours ago

DEADLINE

Broad Agency Announcement _ TRMC _ TE-ST _ W900KK-22-R-0012

Solicitation # W900KK-22-R-0012

The Broad Agency Announcement W900KK-22-R-0012 is a long-term solicitation active through March 14, 2037, aimed at advancing Research, Development, Test and Evaluation (RDT&E) technologies to enhance the Department of Defense’s Test and Evaluation/Science and Technology (T&E/S&T) capabilities. It targets Technology Readiness Levels (TRLs) 3–6, focusing on innovations that will make T&E processes higher quality, more cost-effective, and faster across Developmental, Operational, and Live-Fire Testing domains. The program actively seeks novel, high-risk, high-payoff solutions that are too unconventional for current DoD adoption, prioritizing technical merit and mission relevance over cost. Proposals must align with specific Opportunity Notices detailing technical areas such as high-G centrifuges for IMU testing, requiring precision engineering, sustainability planning, and compliance with advanced performance metrics. Submission requires a multi-volume technical and cost proposal adhering to strict formatting, page limits, and naming conventions, with all documents delivered electronically to designated officials by the deadline. Key attachments include signed data rights, intellectual property assertions, cost worksheets, and project quad charts, all subject to Controlled Unclassified Information (CUI), export control, and Limited Dissemination markings. Evaluation prioritizes scientific and technical merit equally with mission relevance, followed by cost realism, using a trade-off process rather than Lowest Price Technically Acceptable. Contractors must comply with rigorous security protocols including Facility Clearance Levels, NISPOM standards, antiterrorism training, and organizational conflict of interest disclosures, particularly when providing prior advising services to TRMC. All work must be performed under strict data rights agreements, with the government expecting unlimited rights to developed IP unless explicitly restricted, and prohibits public dissemination of results without approval under ITAR or CUI regulations. Performance is structured in phased milestones with defined exit criteria and deliverables including prototypes, software with source code, and system documentation, all subject to Government inspection and acceptance via DD Form 250 at designated facilities, with no FOB terms specified. Submission is governed by a clear chain of contact, administrative requirements, and adherence to federal acquisition guidelines, but no contract value, funding ceiling, or payment details are provided in the solicitation.

W6QK Acc-Apg-Orlando

POSTED

about 23 hours ago

DEADLINE

in over 3 years

More opportunities from Department Of Defense → FA7000 10 Cons Lgc

Same awarding agency

USAFA: Quantum Demonstration/Experiment System (Amendment 3)

Solicitation # FA700026Q0057

Solicitation FA700026Q0057 is a combined synopsis and request for quotation for the purchase of a Quantum Demonstration/Experiment System for the United States Air Force Academy Physics Department and the Laser and Optics Research Center. The required system must be a modular, scalable, and reconfigurable integrated experimental platform for quantum information science and quantum optics, consisting of a Time Correlation/Time Tagging (TCSPC) system and a Fast Single Photon Detector. All components must be commercially supported, laboratory-grade instrumentation featuring high quantum efficiency, low dark count rates, and picosecond-level timing precision. This is a 100 percent Small Business Set Aside awarded as a firm-fixed-price contract, with delivery required F.O.B. Destination to the USAF Academy in Colorado. The government will select the awardee based on best value, evaluating offers on technical capability according to the salient characteristics, the proposed delivery schedule, warranty terms, and past performance verified via sam.gov and SPRS. Submission requirements include a three-part quote consisting of technical capabilities, past performance information, and a firm-fixed price, along with a completed Buy American–Balance of Payments Program Certificate. The contract incorporates various FAR and DFARS clauses, including requirements for the safeguarding of contract information systems and prohibitions on covered defense telecommunications equipment. Payment will be processed electronically through the Wide Area WorkFlow system.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

USAFA Mach 6 Ludwieg Tube (M6LT) Force Balance

Solicitation # FA700026Q0081

This solicitation, FA700026Q0081, seeks a firm-fixed-price purchase order for a six-component force balance designed for the Mach 6 Ludwig Tube facility at the U.S. Air Force Academy’s Department of Aeronautics, with all requirements detailed in Attachment 1. The acquisition is fully reserved for small businesses under a total small business set-aside, with eligible contractors required to self-certify their size status in SAM.gov using NAICS code 334519 and meet all FAR and DFARS representations, including active registration and compliance with security prohibitions. Offers must be submitted electronically by 6 August 2026 at 2:00 p.m. MDT to the designated point of contact and include the completed SF1449 form with valid pricing valid for at least 60 days, technical capability documentation, authorized reseller certification if applicable, proof of SAM.gov registration with all required certifications, and the completed Buy American Certificate per Attachment 2. The Government will not award until funds are available and reserves the right to cancel the solicitation without reimbursement for offeror costs. Evaluation follows a phased approach prioritizing price but requiring technical acceptability and best value: quotes are first ranked by lowest price, with only the three lowest-priced submissions undergo technical and past performance review. Technical capability is assessed on an acceptable or unacceptable basis against Attachment 1, with mandatory compliance with security and supply chain requirements under FAR 52.240-91, and past performance is evaluated using Supplier Performance Risk System (SPRS) data. Award will be made to the first quote that is technically acceptable and represents the best value; if none of the top three meet criteria, subsequent lowest-priced quotes are evaluated in order until an award decision is reached. The product must comply with Buy American requirements, with domestic origin determined by manufacturing location and certified via Attachment 2. All delivered items must be permanently marked with a machine-readable 2D Data Matrix symbol per MIL-STD-130, containing unique item identifiers and encoded according to ISO/IEC 16022 and ISO/IEC 15418 standards, with labeling on shipments conforming to MIL-STD-129. Delivery is FOB destination to the specified USAFA address, and invoicing must be processed exclusively through Wide Area WorkFlow using approved document types. The force balance must be delivered no later than 31 August 2027,

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

USAFA Rapid Acquisition Commercial Solutions Opening (CSO)

Solicitation # FA7000-25-S-C001

The United States Air Force Academy is leveraging a Commercial Solutions Opening (CSO) numbered FA7000-25-S-C001 to procure innovative commercial technologies and services across multiple domains critical to its mission, operating under a flexible, umbrella framework that allows for targeted calls for proposals over its open period through May 29, 2030. This CSO is structured to treat all acquisitions as commercial items under FAR Part 12, with the government retaining the right to use Other Transactions as alternative award vehicles. The initiative is not seeking proposals at this initial stage but will issue specific Calls for proposals at designated windows throughout the period, each addressing a distinct area of interest aligned with USAFA priorities. These include strategic outreach to increase applicant pools, AI-powered automation of admissions transcript processing, autonomous virtual perimeter monitoring for security situational awareness, AI-enabled exoskeleton technology to enhance warfighter lethality, comprehensive brand analysis and roadmap development, and warfighter training support services for a 47-month cumulative cadet training continuum. Proposals must be submitted in response to individual Calls, following detailed guidance including Quad Charts and Solution Briefs for initial screening, with invited offerors advancing to Phase III with comprehensive technical, cost, and statement of work submissions. Proposals are evaluated based on three equally weighted factors: technical merit and applicability, importance to USAFA programs, and funds availability, assessed through peer or scientific review rather than competitive comparison. The government will select the most technically capable and competent offerors, with pricing considered only to ensure fairness and reasonableness. Performance will be monitored with quality assurance measures specific to each Call, such as preventing AI accuracy degradation in transcript processing or limiting content revisions in brand messaging to no more than two per quarter. All services are to be delivered at the U.S. Air Force Academy in Colorado Springs, Colorado, with core hours of operation from 7:30 A.M. to 5:00 P.M. MST, Monday through Friday. Contractors must be registered in SAM, meet responsibility requirements under FAR Part 9.1, and maintain a satisfactory performance record. Foreign IT companies and foreign nationals are prohibited from participating in certain Calls, particularly those involving sensitive systems. Security clearances are generally not required beyond CUI access protocols, and no Mission Essential status has been assigned. Contract administration will be overseen by a designated Contracting Officer Representative, and awards may include a base year with up to four option years, depending on the scope. All pricing must be submitted in Excel

Flight Training

POSTED

DEADLINE

in almost 4 years

Warfighter Training Support Services (WTSS)The Warfighter Training Support Services contract seeks to deliver comprehensive training solutions aimed at enhancing warfighter readiness through advanced curriculum development, seamless integration of simulation technologies, and the implementation of performance assessment tools. The work will leverage cutting-edge methodologies such as artificial intelligence and immersive learning environments to create adaptive, data-driven training experiences that respond to evolving operational demands. This effort is designed to modernize training delivery and ensure measurable improvements in combat effectiveness across military units. The contract is structured as a subcontract under the Department of Defense, specifically managed by FA7000 10 Cons Lgc, with performance required at the USAF Academy in Colorado Springs, 80840. The NAICS code 611519 indicates the work falls under other technical and trade schools, reflecting its focus on specialized military education and training services. The solicitation was posted on May 5, 2026, and responses are due by May 29, 2030, providing a lengthy window for potential vendors to prepare detailed proposals. There is no specified set-aside or small business preference, and the opportunity is open to qualified subcontractors capable of delivering scalable, secure, and future-ready training systems.

Other Technical and Trade Schools

POSTED

DEADLINE

in almost 4 years

Digital Outreach Tools for Applicant EngagementThe contract targets the development and implementation of digital platforms and outreach campaigns designed to enhance applicant engagement and recruitment efforts for the United States Air Force Academy, with a specific focus on increasing participation from underrepresented communities. Key initiatives include the creation of virtual tours, interactive digital content, and targeted social media strategies aimed at building awareness, fostering connection, and guiding prospective applicants through the recruitment process. These tools are intended to replace or supplement traditional outreach methods, offering more accessible, scalable, and engaging experiences that resonate with diverse audiences across the country. The work will be performed primarily at the USAF Academy in Colorado Springs, Colorado, with the contract issued under NAICS code 541840, which pertains to advertising and related services. This subcontract falls under the Department of Defense and is open for responses until May 29, 2030, allowing ample time for proposers to design comprehensive, innovative solutions. The effort is structured to align with broader military recruitment goals, emphasizing inclusivity and digital innovation to ensure the Air Force Academy attracts a more representative and qualified pool of future cadets.

Media Representatives

POSTED

DEADLINE

in almost 4 years

AI-Integrated Exoskeletons for Warfighter Performance EnhancementThe contract seeks the development and delivery of advanced AI-enabled exoskeleton systems designed to significantly improve warfighter endurance, lethality, and overall mission performance by providing adaptive physical support and real-time feedback during operational tasks. These systems must integrate artificial intelligence to dynamically respond to the user’s movement, terrain conditions, and physiological state, enhancing strength and stamina without compromising mobility or situational awareness. The technology must be ruggedized for military environments and capable of operating under extreme conditions while maintaining seamless interoperability with existing soldier systems and command networks. The project is structured as a subcontract under the Department of Defense, with performance centered at the USAF Academy in Colorado, 80840. The solicitation was posted on May 5, 2026, with a firm deadline for responses set for May 29, 2030, indicating a long-term development and procurement cycle. The North American Industry Classification System code 336412 confirms the focus on aerospace product and parts manufacturing, aligning the effort with advanced defense hardware innovation. While no set-aside provisions are specified, the work is anticipated to require high-level expertise in robotics, machine learning, biomechanics, and military operational requirements, targeting contractors with proven capabilities in integrating AI with wearable human augmentation technologies.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in almost 4 years

Autonomous Virtual Perimeter Monitoring SystemThe contract calls for the design and implementation of an autonomous virtual perimeter monitoring system at the United States Air Force Academy, leveraging drones and sensor networks integrated with artificial intelligence analytics to provide real-time surveillance and intrusion detection. The solution must operate continuously and reliably across the academy’s perimeter, using advanced AI to distinguish between legitimate activity and potential security threats without human intervention. The system is expected to enhance situational awareness, reduce response times, and minimize reliance on manual patrol methods by automating detection and alerting processes. This subcontract is part of a broader Department of Defense initiative to modernize security infrastructure using emerging autonomous technologies. The contract has a response deadline of May 29, 2030, and is categorized under NAICS code 334511, which pertains to navigational, measuring, electromedical, and control instruments manufacturing. Performance is required at the USAFA location in Colorado Springs with a zip code of 80840. The project emphasizes scalability, resilience under operational stress, and seamless integration with existing defense communication and command systems, while maintaining strict compliance with federal security protocols governing military installations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in almost 4 years

AI-Powered High School Transcript Analysis & Scoring SystemThe contract calls for the development and deployment of an AI-driven system to automate the extraction, interpretation, and scoring of high school transcripts for admissions purposes at the United States Air Force Academy. The system must handle sensitive data including personally identifiable information and controlled unclassified information with full compliance to federal security standards. It will process academic records from diverse high schools across the United States, normalize inconsistent formats, extract key metrics such as GPA, course rigor, class rank, and extracurricular involvement, and apply a standardized scoring model to support admissions decision-making. The technology must be robust, scalable, and capable of continuous learning to adapt to evolving transcript formats and institutional reporting variations. The work is governed under a subcontract with NAICS code 511210 and is set for performance at the USAF Academy in Colorado Springs, with a response deadline of May 29, 2030. The project is sponsored by the Department of Defense through the office FA7000 10 Cons Lgc, and the system must ensure end-to-end data protection throughout ingestion, processing, storage, and transmission. Success requires strict adherence to cybersecurity protocols, transparency in algorithmic scoring, and auditability of all processing decisions. The contractor will be expected to deliver not only a functional system but also comprehensive documentation, training materials, and ongoing support to ensure seamless integration into the Academy’s existing admissions infrastructure.

Software Publishers

POSTED

DEADLINE

in almost 4 years

Small Business Subcontracting Plan Development & ReportingThis contract involves developing and maintaining a subcontracting plan in compliance with FAR 52.219-9, focusing on small business participation across multiple categories including Minority Business Enterprises (MBE), Women-Owned Business Enterprises (WBE), Veteran-Owned Small Businesses (VOSB), Service-Disabled Veteran-Owned Small Businesses (SDVOSB), Historically Underutilized Business Zones (HUBZone), and Small Disadvantaged Businesses (SDB). It requires comprehensive outreach efforts, goal tracking, and regular reporting to ensure contractors meet the specified small business participation targets. The contract supports the Department of Defense and is connected to the USAF Academy as the place of performance. The contract, titled "Small Business Subcontracting Plan Development & Reporting," falls under NAICS code 541611, which covers administrative management and general management consulting services. Issued on March 4, 2026, it has a response deadline on August 9, 2028, providing ample time to prepare proposals. Although no specific agency office address or point of contact is provided, it is managed by the contracting office designated as FA7000 10 Cons Lgc within the Department of Defense. The focus is on ensuring robust subcontracting plans that promote small business engagement and compliance with federal subcontracting regulations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in almost 2 years

Supply Chain Risk Management & TAA Compliance AuditThe contract involves conducting comprehensive Cyber Supply Chain Risk Management (C-SCRM) assessments to evaluate and mitigate risks within the supply chain. A primary focus is ensuring all contract deliverables adhere to the Trade Agreements Act (TAA) requirements, confirming that products comply with relevant trade regulations. Additionally, the contractor is responsible for verifying that all components are genuine and free from counterfeit parts through rigorous supply chain traceability processes. Awarded by the Department of Defense under the solicitation titled "Supply Chain Risk Management & TAA Compliance Audit," this subcontract falls under the NAICS code 541618. The performance location is at the USAF Academy, with the contract posted in early March 2026 and a response deadline extending to August 2028. The scope emphasizes maintaining compliance and integrity throughout the supply chain to support defense-related logistics and operations effectively.

Other Management Consulting Services

POSTED

DEADLINE

in almost 2 years

Technical Proposal & SOW Development Support (Proposal Writing)This contract involves providing specialized technical writing and proposal development services to support Contractor Support Organization submissions for the Department of Defense. The scope includes preparing a detailed 10-page Statement of Work, crafting a comprehensive technical approach, and developing a Quad Chart, all of which must align with DoD requirements. The work is to be performed as a subcontract and falls under the NAICS code 541611, which pertains to administrative management and general management consulting services. The contract is associated with the Department of Defense's FA7000 10 Cons Lgc agency and is set to be carried out primarily at the USAF Academy location, with a postal code of 80840. The solicitation was posted on March 4, 2026, and the response deadline is August 9, 2028. Although specific details regarding set-asides, point of contact, or exact office address are not provided, the contract’s focus is clearly on supporting proposal efforts in a manner consistent with DoD standards, ensuring precise and compliant documentation needed for successful submission.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in almost 2 years

Secure Network Infrastructure Design & Integration (Cisco-Based)This contract involves the design, configuration, and integration of a secure network infrastructure based on Cisco technologies tailored for classified research environments. The work must comply with Department of Defense IT-III standards and incorporate a zero-trust architecture to ensure heightened security measures. It is a subcontract opportunity issued by the Department of Defense under the NAICS code 541512, which relates to computer systems design services. The performance location is specified as the United States Air Force Academy with a ZIP code of 80840. The solicitation was posted on March 4, 2026, with a response deadline set for August 9, 2028. The contract aims to support the modernized and secure communication needs of the DoD by implementing cutting-edge security protocols and networking solutions conforming to federal cybersecurity mandates. Details regarding the type of set-aside or specific organizational eligibility were not provided, and the point of contact information is not available.

Computer Systems Design Services

POSTED

DEADLINE

in almost 2 years