Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Homeland Security was posted on June 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

USCGC CALHOUN DS FQ2 FY27

Closed
70Z08527S_CALHOUN-FY27Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
Federal
TSV4 NARR MESSING AND MODERNIZATION
Solicitation # N0018927QL008
NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.
Navsup Flt Logistics Ctr Norfolk

POSTED

about 18 hours ago

DEADLINE

in 8 days
NAICS: 336611
New
Federal
Voyage Repair (VR)
Solicitation # N6817127QN006
Solicitation N6817127QN006 is a request for a firm fixed price contract to perform voyage repairs for the USS RAFAEL PERALTA (DDG 115) in Mombasa, Kenya. The period of performance is scheduled from November 12, 2026, to November 19, 2026. The scope of work includes hull maintenance such as high-pressure washing and corrosion removal, systems repair involving the cleaning and inspection of refrigeration and air conditioning plant condensers, and general services including the provision of rigging, scaffolding, and furniture upholstery replacement. All work must adhere to NAVSEA Standard Items (FY27 CH-2) and specification package #NAPL-009-27, with safety standards governed by OSHA Part 1915 for shipyard employment. The contract will be awarded to the Lowest Priced Technically Acceptable offeror, with technical capabilities evaluated on an acceptable or unacceptable basis. Prospective contractors must be registered in the System for Award Management and submit quotes in English and US dollars by October 30, 2026. Required submission documentation includes Standard Forms 18 and 30, a completed price breakdown, and a signed non-disclosure agreement. Administration is managed by the Navsup Flc Sigonella Naples Office, with electronic invoicing processed through Wide Area WorkFlow. Key compliance requirements include the Defense Base Act for workers compensation and the submission of a detailed Test and Inspection Plan prior to the commencement of work.
Navsup Flc Sigonella Naples Office

POSTED

about 18 hours ago

DEADLINE

in 2 days
NAICS: 336611
New
SLED
F&W, 2018 Munson Packman Boat Repower project
Solicitation # 2018 Munson Packman Boat Repower
The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the installation of new-generation Honda iST electronic control heads at primary and secondary helm stations, integration with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist Steering system, and a comprehensive fuel system upgrade using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two-hour sea trial to validate performance and safety protocols. The Tribe will deliver the vessel to the contractor's facility, which must provide a secure, fenced yard or indoor shop. Proposals are due by November 13, 2026, and must be submitted in PDF format. Evaluation is based on a 100-point scale with significant preference given to Colville Business Enterprises and other Indian-owned businesses. Award criteria prioritize reliability and effectiveness over the lowest cost. Selected contractors must provide proof of Honda Marine Authorized Dealer status, maintain appropriate liability insurance, and agree to either a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. All payments are subject to the Tribes appropriation process and availability of funds.
Confederated Tribes of the Colville Reservation

POSTED

1 day ago

DEADLINE

in 17 days

AI Contract Overview

Show more

The U.S. Coast Guard is conducting market research to identify qualified contractors capable of performing dockside repairs on the USCGC CALHOUN (WMSL-759), a 418-foot National Security Cutter, scheduled for work in North Charleston, South Carolina, between February and May 2027. This is a Sources Sought Notice under FAR Part 10, aimed at assessing industry capabilities, commercial availability of services, and determining whether to set aside the future solicitation for small business competition, specifically as a Total Small Business Set-Aside under FAR 19.5. The requirement covers a broad range of repair and modification tasks including circuit breaker inspections, fuel and water tank cleanings, deck surface renewals, installation of new systems such as dewatering connections and MPAC demisters, HVAC and dry storage modifications, welding, and provision of temporary services and fire prevention measures, all under the NAICS code 336611 with a size standard of 1,300 employees. Companies interested in responding must submit information by July 14, 2026, to the designated points of contact, including their business name, address, UEID, point of contact details, business size classification with certification documentation, a statement confirming their intent to submit a proposal if a solicitation is issued, and past performance evidence demonstrating experience with similar complex ship repair projects. Participation requires SAM registration, and responses must not include classified or proprietary information. The government will not pay for submissions or guarantee feedback, and this notice does not obligate the agency to issue a solicitation. Future contract opportunities, if any, will be posted on SAM.gov, and respondents are responsible for monitoring the site. Information provided may be used in the development of any subsequent solicitation, and only responses that clearly demonstrate capability and intent will inform the government’s decision on competition structure.

General Info

USCG seeks small businesses for 2027 dockside maintenance on USCGC CALHOUN in North Charleston, SC.

NAICS

336611 - Ship Building and Repairing

Place of Performance

North Charleston, SC, USA

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)
Contacts2 people available
OfficeALAMEDA, CA, 94501, USA
Office AddressALAMEDA, CA, 94501, USA
Contacts

Full Description

Show more

USCGC CALHOUN DS FQ2 FY27


This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action.


The U.S. Coast Guard Surface Forces Logistics Center - Contracting & Procurement Division (SFLC-CPD) Branch #2 Long Range Enforcer (LRE) section is conducting market research for potential qualified contractors for the dockside of the Coast Guard Cutter (CGC) (WMSL 759) CALHOUN.


ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611 – Ship Building and Repairing and the size standard is 1,300 employees.


PSC Code for this requirement: J998 – Non-Nuclear Ship Repair (East).


PLACE OF PERFORMANCE is North Charleston, SC


ANTICIPATED PERIOD OF PERFORMANCE: The anticipated period of performance is February 2027 to May 2027.


This requirement is for a contractor to provide all necessary labor, services, supplies, materials, equipment, power, accessories, personnel and such other things as are necessary, except as otherwise specified to perform dockside repairs to the USCGC CALHOUN (WMSL-759), a 418-foot National Security Cutter in accordance with the solicitation, schedule and specifications.


WORK ITEMS include (but not limited to):


WORK ITEM 1: Circuit Breakers (Draw Out), Inspect and Test


WORK ITEM 2: Miscellaneous System Relief Valves, 5 Year Certifications


WORK ITEM 3: Deck Covering (Slip-Resistant) Stern Deck, Renew


WORK ITEM 4: Tenting (Stern Deck), Provide


WORK ITEM 5: Deck Covering (Polymeric), Repair and Seal


WORK ITEM 6: Tanks (MP Fuel Service), Clean and Inspect


WORK ITEM 7: Tanks (MP Fuel Storage and Overflow), Clean and Inspect


WORK ITEM 8: Tanks (Aviation Fuel Stowage and Overflow), Clean and Inspect


WORK ITEM 9: Tank (Water Mist), Clean and Inspect


WORK ITEM 10: Tanks (Water Mist), Preserve (Partial)


WORK ITEM 11: Potable Water Pneumatic Tank, Clean and Inspect


WORK ITEM 12: TCTO: Dewatering Overboard Discharge Connections, Install


WORK ITEM 13: TCTO: Potable Water FWD Hose Connection, Install     


WORK ITEM 14: TCTO: Dry Provision Storeroom, Modify  


WORK ITEM 15: TCTO: HVAC System (Port Aft Capstan), Modify


WORK ITEM 16: TCTO: Weather Deck Scuppers, Install   


WORK ITEM 17: MPAC Demister, Install      


WORK ITEM 18: Temporary Services, Provide – Cutter       


WORK ITEM 19: Welding, Provide (General)              


WORK ITEM 20: Fire Prevention, Provide     


SUBMISSION OF INFORMATION: Interested parties having the capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this Sources Sought Notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail, with subject line: SSN CALHOUN DS FQ2 FY27, to Melissa Hyacinth at contact@example.gov and Mark Cap at contact@example.gov not later than the date identified within this notice with the following information/documentation:


1. Name of Company, Address and Unique Entity Identification Number (UEID).


2. Point of Contact and Phone Number


3. Business Size applicable to the NAICS Code:


a. 8(a) Small Business Concern


b. HubZone Small Business Concern


c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC)


d. Veteran Owned Small Business Concern (VOSBC)


e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB)


f. Woman Owned Small Business Concern (WOSBC)


g. Small Business Concern


h. Large Business Concern


4. Documentation Verifying Small Business Certification


5. Statement on how your company will complete the work items and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.


6. Past Performance Information: Evidence of experience in work similar in type, size, scope and complexity to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant.


SAM: Interested parties should register in the System for Award Management (SAM) database, formerly known as Central Contractor Registration (CCR), as prescribed in FAR 4.203-1(b). SAM registration can be obtained by accessing the internet at www.sam.gov.


Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Quotation or a Request for Proposal. It is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered as a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriate for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, do not request a copy of the solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on the SAM website (http://SAM.gov). It is the potential offeror's responsibility to monitor Contract Opportunities on the SAM website for release of any future solicitation that may result from this Sources Sought Notice. Responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.


More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 811210
Federal
TRS-3D /AN/SPS-75 Radar repairs/ overhaul services
Solicitation # 70Z08526RRJ001B00
The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in about 1 month
View Details
NAICS: 333995
Federal
APPLETON CYLINDER
Solicitation # 70Z08526Q40200B00
Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS