Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on September 25, 2015. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

DRYDOCK AND REPAIR USCGC ELM

Awarded
HSCG85-15-Q-P45U68Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
SLED
F&W, 2018 Munson Packman Boat Repower project
Solicitation # 2018 Munson Packman Boat Repower
The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified Honda Marine Authorized Dealer to perform a complete propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project is divided into six phases, beginning with the decommissioning and removal of two Honda BF250A outboard engines and incompatible rigging, followed by the installation of two new Honda BF250D Drive-by-Wire outboards. The scope includes integrating new Honda iST electronic control heads at primary and secondary helm stations, interfacing with the existing SeaStar Power Assist steering and NMEA 2000 network, replacing fuel lines with USCG Type A1-15 hoses, and installing new digital gauges and ignition switches with safety tethers. The project concludes with static diagnostics and a minimum two hour sea trial to validate performance and safety protocols. The selected contractor must provide a secure facility for vessel storage and submit a firm-fixed price proposal by November 13, 2026. Evaluation is based on a 100 point scale considering technical capability and budget, with a specific preference for responsible Indian Offerors. Contractual requirements include commercial general liability insurance of at least 1 million dollars per occurrence, a 25 percent retainage or a performance bond for contracts exceeding 100,000 dollars, and adherence to the Colville Tribal Employment Rights Ordinance. All disputes are subject to the jurisdiction of the Colville Tribal Court, and payments are contingent upon the availability of tribal funds.
Confederated Tribes of the Colville Reservation

POSTED

about 17 hours ago

DEADLINE

in 11 days
NAICS: 336611
New
DIBBS
INSULATION BLOCK, THERM
Solicitation # SPE7M2-27-T-0667
This solicitation, issued by the Defense Logistics Agency Weapons Support Nuclear Reactor Program, seeks the procurement of 39 thermal insulation blocks under NSN 5640-01-462-9252, specifically identified as L3Harris Maritime Power and Energy part number 715069-A. The contract is categorized under NAICS code 336611 and requires a delivery lead time of 163 days after order, with a need ship date of April 26, 2027, and a final required delivery date of July 18, 2027. Delivery is set as FOB Destination, with the consignee located at DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will also occur at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. Special attention is required for hazardous and radioactive materials, which must be labeled according to the Hazard Communication Standard 29 CFR 1910 and the latest MIL-STD 129 revisions. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. All quotes must be submitted via the DIBBS portal, and offerors must maintain current representations and certifications in the System for Award Management.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 336611
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-27-T-1307
Solicitation SPE7M1-27-T-1307 is a fixed-price, total small business set-aside contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of three spring-loaded shaft seal assemblies, identified by NSN 4320015418497. The requirement falls under NAICS code 336611 and specifies a delivery timeline of 168 days, with a need ship date of April 20, 2027, and an original required delivery date of October 2, 2027. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the Distribution Depot Puget Sound in Bremerton, Washington. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E, with marking governed by MIL-STD-129. Technical and quality standards are defined by the DLA Master List of Technical and Quality Requirements (RA001). Special material restrictions are in place, including the Buy American Act, the Berry Amendment, and specific NAVSEA 5100-003D restrictions regarding the intentional addition of mercury. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and mandatory registration through the Account Management and Provisioning System for shipment access. Compliance with DFARS 252.204-7012 for cybersecurity and various telecommunications representations is also required.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 2 days
NAICS: 336611
New
SLED
Battleship Wisconsin Underwater Hull Survey Inspection, Cleaning, Maintenance, and Repair Services
Solicitation # 11143-0-2027
The City of Norfolk is soliciting bids for a five-year contract from 2027 through 2031 to provide underwater hull survey, inspection, cleaning, maintenance, and repair services for the Battleship Ex-Wisconsin, located at the Nauticus Maritime Museum in Norfolk, Virginia. The scope of work includes recurring services such as semi-annual swim-by inspections, semi-annual Impressed Current Cathodic Protection (ICCP) system surveys and cleaning, and annual inspections and cleaning of 164 box blanks. Additionally, the contract requires a one-time comprehensive hull survey and underwater hull cleaning, both anticipated in 2030, which include thickness gauging, coating measurement, and video inspection. All work must be performed in accordance with specific NAVSEA standards, and the selected vendor must be certified by the U.S. Navy Naval Sea Systems Command Underwater Ship Husbandry Management Division. The contract will be awarded to the lowest responsible bidder based on the grand total submitted in the bid form. Bidders must demonstrate their responsibility through evidence of necessary facilities, financial resources, and past performance. Required certifications include authorization to transact business in Virginia and compliance with federal immigration and non-discrimination laws. The selected contractor must maintain significant insurance coverages, including Marine Comprehensive Liability of up to 5 million dollars aggregate and Professional Liability of up to 2 million dollars aggregate. Deliverables consist of detailed inspection and repair reports with photographic evidence, with payment contingent upon the submission of post-inspection surveys.
Nauticus

POSTED

about 21 hours ago

DEADLINE

in 16 days

AI Contract Overview

Show more

The U.S. Department of Homeland Security, U.S. Coast Guard Surface Forces Logistics Center issued solicitation HSCG85-15-Q-P45U68 for a firm fixed price contract to perform dry dock repairs and alterations to the USCGC ELM (WLB-204). This acquisition is set aside 100 percent for small businesses under NAICS code 336611. The scope of work includes a wide array of definitive and optional tasks, such as hull plating inspection and ultrasonic testing, tank cleaning, propulsion system maintenance, rudder and thruster overhauls, and general preservation of the superstructure and underwater body. The performance period is scheduled from October 7, 2015, to December 16, 2015, with all work required to be completed within 71 calendar days from the date the vessel becomes available. The contract requires the contractor to provide all necessary labor, materials, equipment, and facilities. Payment is based on a percentage or stage of completion, with a minimum of 25 percent completion required before a contract line item can be invoiced. Additionally, 10 percent of the total contract price is withheld until all deliverables are received and accepted.

General Info

Contract Value

$2,176,532

NAICS

336611 - Ship Building and Repairing

Place of Performance

CA, USA

Set-Aside

NONE

Award Issued Date

Documents

1
DOCX, Low priority271 pages · other
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)
Contacts2 people available
OfficeALAMEDA, CA, 94501, USA
Office AddressALAMEDA, CA, 94501, USA
Contacts
Crystal G. ElliottContract Specialist

Full Description

Show more
NOTICE TO VENDORS SOLICITATION NUMBER:HSCG85-15-Q-P45U68 The U.S. Department of Homeland Security, U.S. Coast Guard Surfaces Forces Logistics Center (SFLC) will acquired the work outlined in the solicitation utilizing procedures in FAR Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. THE FOLLOWING INFORMATION IS HIGHLIGHTED FOR YOUR ATTENTION: 1. This cover sheet is not intended to be all-inclusive. Please read the entire solicitation including any attachments, to ensure completion of all required representations, certifications, and submissions. Acknowledge all Solicitation Amendments (SF-30) issued by the Government. 2. Your offer shall include all of the documents and information listed on page 10 (FAR Provision 52.212-1 (b) Submission of Offers), including the planning document in section (7) under deliverables, and your offer shall be received by our office at or before the exact date and time specified on page 1 of the SF 1449, Block 8 to be eligible for award. Also, see FAR Provision 52.212-2 (page 30) for Evaluation Factors. 3. Submit your offer, with all required documentation via one of the following methods: ? Mail to: United States Coast Guard Surface Forces Logistics Center Attn: Jaime Warren, Contract Specialist 300 East Main Street, Suite 600 Norfolk, VA 23510-9102 ? Email to: Attn: Jaime Warren, Contract Specialist Email: contact@example.gov ? Fax to: Attn: Jaime Warren, Contract Specialist Fax Number: +1 (555) 000-0000 4. QUESTIONS/CONCERNS/REQUEST FOR DRAWINGS: It shall be the obligation of the vendor to exercise due diligence to discover and to bring to the attention of the Government any ambiguities, inconsistencies or concerns regarding the information in this solicitation. All questions/concerns/request for drawings regarding this solicitation shall be submitted in writing to the Contract Specialist at contact@example.gov no later than 3 September 2015 at 3:00 PM EST. Follow-up/ additional questions will not be accepted after this date and time due to time constraints. Vendors shall reference the solicitation number and provide enough information in their email so the Government can easily respond to their questions/concerns. Questions/concerns will be compiled and addressed on an Amendment of Solicitation (SF-30) and will be posted on the FedBizOpps website for viewing by all potential vendors. Answers to questions will be available after the due date for questions/concerns has past. NOTICE FOR FILING AGENCY PROTESTS United States Coast Guard Ombudsman Program It is the policy of the United States Coast Guard to issue solicitations and make contract awards in a fair and timely manner. Parties who believe a specific procurement is unfair or otherwise defective are encouraged to use the Coast Guard Ombudsman Program for Agency Protests (OPAP), rather than filing a protest with the General Accounting Office (GAO) or other external forum. The OPAP is designed to resolve contractor protests in a faster, less expensive manner. Concerns of interested parties can be resolved through independent, government binding adjudication taking place outside the procuring activity's chain of command. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the contracting officer or Ombudsman. Informal Forum with the Ombudsman. Interested parties should first direct their concerns to the responsible contracting officer. If the contracting officer is unable to satisfy the concerns, the interested party is encouraged to contact the OPAP. Under this informal process, the agency is not required to suspend contract award performance. In order to ensure a timely response, interested parties should provide the following information: solicitation/contract number, contracting office, contracting officer, and solicitation closing date (if applicable). Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the contracting officer through open and frank discussions. If the protester's concerns are unresolved, the protester may file a formal agency protest with the contracting officer or the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined to be in the best interest of the government. The agency's goal is to resolve protests in less than 35 calendar days from the date of filing. If the protester fails to submit the required information, as outlined in Federal Acquisition Regulation (FAR) 33.103, resolution of the protest may be delayed or the protest may be dismissed. To be timely, protests must be filed within the period specified in FAR 33.103(e). Protests filed under the OPAP program should be submitted to: Department of Homeland Security United States Coast Guard (CG-91) Ombudsman Program for Agency Protests Email: contact@example.gov For questions pertaining to the OPAP program, please contact the Ombudsman hotline at +1 (555) 000-0000. Commander U.S. Coast Guard Surface Forces Logistics Center CPD-C&P2-IBCTPL 300 East Main Street, Suite 600 Norfolk, VA 23510-9102 REQUEST FOR QUOTATION HSCG85-15-Q-P45U68 USCGC ELM (WLB-204) DRY DOCK REPAIRS FY15 SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30 1. REQUISITION NUMBER 2115855P45U68 PAGE 2 OF 48 2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. SOLICITATION NUMBER HSCG85-15-Q-P45U68 6. SOLICITATION ISSUE DATE 08/20/2015 7. FOR SOLICITATION INFORMATION CALL: a. NAME Jaime Warren b. TELEPHONE NUMBER (No collect calls) +1 (555) 000-0000 8. OFFER DUE DATE/ LOCAL TIME 08 Sep 2015 1:00 EST 9. ISSUED BY CODE 75174 USCG SURFACE FORCES LOGISTICS CENTER Attn: Jaime Warren 300 E Main Street, Suite 600 Norfolk, VA 23510 E-mail: contact@example.gov 10. THIS ACQUISITION IS 0 UNRESTRICTED OR 1 SET ASIDE: 100 % FOR: 1 SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS 0 (WOSB) ELIGIBLE UNDER THE WOMEN-OWNED 0 HUB ZONE SMALL SMALL BUSINESS PROGRAM NAICS: BUSINESS 336611 0 EDWOSB SIZE STANDARD: 0 SERVICE-DISABLED 1,000 VETERAN-OWNED SMALL BUSINESS 0 8(A) 11. DELIVERY FOR FOB DESTINATION UNLESS BLOCK IS MARKED 0 SEE SCHEDULE 12. DISCOUNT TERMS 1 13a. THIS CONTRACT IS A RATED ORDER UNDER DPAS (15 CFR 700) 13b. RATING DO-N5 14. METHOD OF SOLICITATION 1 RFQ 0 IFB 0 RFP 15. DELIVER TO CODE See Description of Supplies/Services 16. ADMINISTERED BY CODE USCG Surfaces Forces Logistics Command Jaime Warren, Contract Specialist 300 East Main Street, Suite 600 Norfolk, VA 23510-9102 17a. CONTRACTOR/ CODE FACILITY OFFEROR CODE DUNS: TELEPHONE NO: 18a. PAYMENT WILL BE MADE BY CODE USCG Finance Center 1430A Kristina Way Chesapeake, VA 23326 CONTINUED ON PAGES 5 - 7 0 17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED 1 SEE ADDENDUM 19. ITEM NO. 20. SCHEDULE OF SUPPLIES/SERVICES 21. QUANTITY 22. UNIT 23. UNIT PRICE 24. AMOUNT The Contractor shall furnish all necessary labor, material, services, equipment, supplies, power, accessories, facilities and such other things as are necessary, except as otherwise specified to perform dry docking repairs and alternations to the USCGC ELM (WLB-204), in exact accordance with this solicitation and attached specifications. (Use Reverse and/or Attach Additional Sheets as Necessary) 25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (FOR GOVT USE ONLY) 1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 & 52.212-5 ARE ATTACHED. ADDENDA 1 ARE 0 ARE NOT ATTACHED. 1 27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4, FAR 52.212-5 IS ATTACHED. ADDENDA 1 ARE 0 ARE NOT ATTACHED. 1 28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1 COPY TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN. 0 29. AWARD OF CONTRACT: REFERENCE OFFER DATED . YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS: 30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER) 30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER Shavonda Jamison 31c. DATE SIGNED AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1449 (Rev. 2/2012) PREVIOUS EDITION IS NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.212 19. ITEM NO. 20. SCHEDULE OF SUPPLIES/SERVICES 21. QUANTITY 22. UNIT 23. UNIT PRICE 24. AMOUNT All work is to be performed in accordance with USCGC ELM (WLB-204) Specification for Drydock Repairs FY15, REV-0, dated 14 May 2015. Work covered by this solicitation, specification and resulting contract shall be completed within seventy-one (71) calendar days from the date the vessel becomes available to the Contractor. This availability is scheduled to start on or about 07 October 2015 and end on or about 16 December 2015. 32a. QUANTITY IN COLUMN 21 HAS BEEN 0 RECEIVED 0 INSPECTED 0 ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE 33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED CORRECT FOR 36. PAYMENT 0 COMPLETE 0 PARTIAL 0 FINAL 37. CHECK NUMBER 0 PARTIAL 0 FINAL 38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY 41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 42 a. RECEIVED BY (Print) 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE 42b. RECEIVED AT (Location) 42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1449 (Rev. 2/2012 PREVIOUS EDITION IS NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.212 Continuation of SF 1449 - BLOCKS 15 - 26 (1) Block 15: Deliver To Place of Performance: Contractor's Facility (to be incorporated at time of award). Place of Acceptance on behalf of the Government: U.S. Coast Guard Cutter ELM (WLB-204). GEOGRAPHIC RESTRICTION: None (2) Block 16: Administered By (Contract Management) Notwithstanding the Contractor's responsibility for total management during the performance of the contract, the administration of the contract will require maximum coordination between the Government and the Contractor. The individuals listed below will be the Government points of contact during the performance period. Contract Administration: The U.S. Department of Homeland Security, U.S. Coast Guard, Surface Forces Logistic Command, CPD, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102 will perform all contract administration. Communications pertaining to contractual administrative matters shall be addressed to one of the Contracting Officers (KO) listed below. Changes in, or deviations from, the specification or terms and conditions of the contract shall not be effected without written modification to the contract as executed by a USCG SFLC CPD Contracting Officer. Contracting Officer: Shavonda Jamison Telephone #: +1 (555) 000-0000 E-Mail: contact@example.gov Fax #: +1 (555) 000-0000 Alternate Contracting Officer(s): Any warranted USCG SFLC CPD Contracting Officer Contract Administrator (Contract Specialist): Serves as the point of contact between the Contractor and the Contracting Officer(s); however, this person does not have a warrant that provides the authority to contractually commit the Government. Contract Specialist: Jaime Warren Telephone #: +1 (555) 000-0000 E-Mail: contact@example.gov Fax #: +1 (555) 000-0000 The Contracting Officer's Representative (COR): Is a Government employee designated in writing by the Contracting Officer to act as a technical advisor for the Contracting Officer for services/items within the scope of the contract. The COR performs functions such as review and/or inspection and acceptance of supplies and services and of a technical nature. A designation letter will set forth the name of the COR and the authorities and limitations of the COR under the contract. This person does not have a warrant that provides the authority to contractually commit the Government or to modify any terms and conditions of a contract. COR: CWO Jason Hubert Telephone #: +1 (555) 000-0000 E-Mail: contact@example.gov (3) Block 17a: Contractor shall include company's DUNS number Block 17b: Remittance Address Payment will be made by Electronic Funds Transfer (EFT) to the Financial Institution listed in the System for Award Management (SAM). To receive an award the Contractor must be registered in the System for Award Management (SAM) http://www.sam.gov. (4) Blocks 18a and 18b: Invoice Procedures INVOICE SUBMISSION PROCESS: 1. The Contractor shall prepare a proper invoice IAW FAR clause 52.212-4, and in addition to the information required by FAR 52.212-4(g) as cited in the contract. All invoices shall be itemized to correlate to the Schedule of Supplies/Services. (A) The Government will make payment under this contract based on a percentage or stage of completion. The Contractor may invoice each contract line item (CLIN) as work progresses. The amount invoiced shall be calculated based on those prices stipulated in the contract Schedule of Supplies/Services as follows: (B) A CLIN may not be invoiced until the percentage complete reaches 25 percent. Future invoices for that CLIN have no limitation as to the percentage of completion required before invoicing. (The minimum percentage of completion (25%) to be reached prior to billing each CLIN may be waived by the Contracting Officer on a case by case basis for large dollar CLINS.) (C) In addition to the information required by FAR 52.212-4 (g) Invoices shall include: 1) Contract Number, Delivery Order/Task Order Number, DOC Number 2) Name and Address of the Contractor 3) Invoice Number and Invoice Date 4) DUNS Number 5) Name of the Contract Specialist and Contracting Officer's 6) Invoice Routing Code (IRC): SFLC-2 7) Indicate Small Business Status 8) Indicate if Final Invoice, the Contractor's final invoice submitted under the contract must be marked as follows: ?THIS INVOICE CONSTITUTES THE FINAL INVOICE - UPON PAYMENT OF THIS INVOICE NO OTHER MONIES ARE DUE UNDER CONTRACT NUMBER (to be assigned upon contract award). 9) The percentage of completion for each CLIN identified; 10) Vessel name 11) The overall percentage and dollar amount previously billed, currently billed and unbilled, 12) Shipping and Payment Terms 13) Name, title, phone number, and mailing address of person to be notified in the event of a defective invoice. All information must be included in an invoice for it to constitute a proper invoice. All improper invoices will be rejected which could delay payment. 2. The Contractor shall forward invoices via e-mail to contact@example.gov or in person to the contracting Officer's Technical Representative (COR). 3. The COR shall review and verify invoices, sign the invoice and return the invoice to the Contractor. 4. The Contractor shall complete the Contractor Invoice Submission Form (listed below). 5. The Contractor shall submit the Contractor Invoice Submission Form, a PDF file of the invoice, and any necessary documents for supplies or services via the U.S. Coast Guard Finance Center website at: http://www.fincen.uscg.mil/centralinv/central_inv_contr.cfm Contractor Invoice Submission Form Directions: Please complete as much information as possible. All blocks in red text are required entries. Note: Web-Invoices are accepted only for Coast Guard Contracts over the Simplified Acquisition Threshold (Document Type 24). THIS WEB FORM IS NOT AN OFFICIAL INVOICE. THE OFFICIAL INVOICE MUST BE ATTACHED Invoice Information Invoice Routing Code: (help) Invoice Number: (help) Contract Number: (help) Invoice Date: (help) BPA Number: (help) Invoice Amount: (help) Delivery/Task Order Number: (help) Discount Terms: % Discount Days: Net Days: (help) Company Information Attachment of Official Invoice Company Name: (help) DUNS: Plus 4: (help) Point of Contact Name: (help) Point of Contact Email: (help) Phone: (help) Fax: (help) Please verify your entry on the next page. Attach invoice and any supporting documentation after verification. - Attachment must be a single PDF file no larger than 3 MB. Grey-scale PDFs are not compatible. This will be our official invoice. Supporting documentation must be combined in the single PDF file or submitted to your contracting office separately via email. - Need help creating a PDF file? Click here for instructions. 6. The Contractor must select the correct Invoice Routing Code for timely invoice processing. The Invoice Routing Code for this contract is SFLC-2. 7. Visit the U.S. Coast Guard Finance Center Website for instructions regarding invoice attachments. http://www.fincen.uscg.mil/centralinv/central_inv_contr.cfm 8. A copy of the invoice and any supporting documentation shall also be e-mailed to the following individuals: contact@example.gov contact@example.gov Additional work verbally agreed to by the parties that has not yet been incorporated into the contract by modification shall not be included in an invoice. Payments will not be made for any work to which a modification has not been properly executed. Invoices submitted for payment that includes such a request will be reduced by the unmodified amount. NOTE: 10% OF THE TOTAL CONTRACT PRICE WILL BE WITHHELD UNTIL ALL DELIVERABLES, REQUIRED BY THE CONTRACT, ARE RECEIVED AND ACCEPTED. FURTHER CONSIDERATIONS WITH INVOICING: In accordance with the Prompt Payment Act, for the purposes of determining a payment due date and the date on which interest will begin to accrue if a payment is late, a proper invoice shall be deemed to have been received: (1) On the later of: (i) For invoices that are mailed the date a proper invoice is actually received by the designated billing office and annotates the invoice with date of receipt at the time of receipt. (ii) For invoices electronically transmitted by the Contractor via web based submission, the date a transmission is received by the designated billing office, and receipt confirmation is provided to the designated recipient; or (iii) The seventh day after the date on which the property is actually delivered or performance of the services is actually completed; unless- a) The agency has actually accepted the property or services before the seventh day in which case the acceptance date shall substitute for the seventh day after the delivery date; or b) A longer acceptance period is specified in the contract, in which case the date of actual acceptance or the date on which such longer acceptance period ends shall substitute for the seventh day after the delivery date; (2) On the date placed on the invoice by the Contractor, when the agency fails to annotate the invoice with date of receipt of the invoice at the time of receipt (such invoice must be a proper invoice); or (3) On the date of delivery, when the contract specifies that the delivery ticket may serve as an invoice. (4) Web based submission by the Contractor and receipt confirmation does not reflect Government review or acceptance of the invoice. (5) For inquiries and payment status please visit: https://fincen.uscg.mil/secure/payment.htm The Data Universal Numbering System (DUNS) number is the primary identifier in System for Award Management (SAM), formally known as Central Contractor Registration (CCR), (see FAR 52.232-33, Payment by Electronic Funds Transfer - Central Contractor Registration (OCT 2003)). Contractors are located and identified in SAM by their DUNS number. Therefore, to facilitate payment, the DUNS number shall be recorded on every invoice submitted to the U.S. Coast Guard. All payments for partial performance rendered by the Government under this contract are based on the assumption that the Contractor will, in good faith, execute and honor all payment terms entered into between it, the Prime Contractor, and any Sub Contractor thereof in the performance of this contract. The Contractor hereby acknowledges the Government's right to reduce or suspend progress payments based on non-payment in accordance with any payment terms of the subcontract agreement. Any amount deemed not payable will be deducted from the Contractor's invoice. Deducted amounts may be resubmitted on the next invoice for reconsideration. (5) Blocks 19-24: Schedule of Supplies/Services CONTRACT TYPE: This solicitation will result in the award of a firm fixed price contract. CONTRACT PERIOD OF PERFORMANCE: Work covered by this solicitation shall be completed within SEVENTY ONE (71) calendar days from the date the vessel becomes available to the Contractor. The performance period is from 07 OCTOBER 2015 to 16 DECEMBER 2015. The availability is scheduled to start on or about 07 OCTOBER 2015. An arrival conference normally will be held within 48 hours of the schedule start date. Vessels being dry docked shall be in dry dock within seventy-two (72) hours of delivery. If a pre-docking shaft alignment is being performed, the vessel shall be dry docked with one-hundred and twenty (120) hours after arrival. SCHEDULE OF SUPPLIES/SERVICES: Base Contract Line Item Numbers (CLINs) are marked as "D" for Definitive. Optional CLINS are marked "O" for Optional. Insert unit prices in all CLINs listed in the Schedule unless "NSP" is printed in the Unit Price column for any CLIN. "NSP" in the section means "Not Separately Priced". Schedule of Supplies/Services USCGC ELM Drydock Repairs FY15 HSCG85-15-Q-P45U68 ITEM DESCRIPTION UNIT PRICE UNIT QTY EXTENDED PRICE D-001 Hull Plating (U/W Body), Inspect JOB 1 D-002 Hull Plating (U/W Body), Ultrasonic Testing JOB 1 D-003 Appendages (U/W), Leak Test JOB 1 D-004 Propulsion Shaft Fairwaters and Rope Guards, Inspect JOB 1 O-005 Appendages (U/W) - Internal, Preserve JOB 1 D-006 Tanks (MP Fuel Stowage and Overflow), Clean and Inspect JOB 1 D-007 Voids (Non-Accessible), Leak Test JOB 1 O-008 Voids (Non-Accessible), Internal Surfaces, Preserve JOB 1 D-009 Tanks (MP Fuel Service), Clean and Inspect JOB 1 D-010 Tanks (Ballast), Clean and Inspect JOB 1 D-011 Controllable Pitch Propeller, System Maintenance JOB 1 D-012 Controllable Pitch Propeller Hub, General Maintenance, Perform JOB 1 D-013 Controllable Pitch Propellers, Clean and Inspect JOB 1 D-014 Main Diesel Engine (MDE) Exhaust Stack Uptakes, Commercial Clean JOB 1 D-015 Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean JOB 1 D-016 Circuit Breakers (60HZ), Inspect and Test JOB 1 D-017 Fathometer Transducer, General Maintenance JOB 1 D-018 Underwater (Speed) Log Transducer(s), Renew JOB 1 D-019 Fwd Scan Sonar Transducer, General Maintenance, Perform JOB 1 D-020 Sea Bay, Clean and Inspect JOB 1 D-021 Sea Bay, Preserve 100% JOB 1 D-022 Rudder Stock Bearings, Check Clearances JOB 1 D-023 Rudder and Rudder Stock, Remove and Inspect JOB 1 D-024 Thruster Units (Bow And Stern), Overhaul JOB 1 D-025 Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test JOB 1 D-026 Hydraulic Chain Stoppers, Inspect And Service JOB 1 D-027 Crossdeck Winches, Inspect and Service JOB 1 D-028 Hydraulic Inhaul Winch, Inspect and Service JOB 1 D-029 Anchor Windlass, Inspect and Service JOB 1 D-030 Anchor Chain(s) and Ground Tackle, Inspect and Repair JOB 1 D-031 Warping Capstan, Inspect and Service JOB 1 D-032 Buoy Crane, Inspect and Service JOB 1 D-033 Grey Water Holding Tank(s), Clean and Inspect JOB 1 D-034 Sewage Holding Tank(s), Clean and Inspect JOB 1 D-035 Decks - Exterior (Buoy or Construction Deck), Preserve 100% JOB 1 D-036 U/W Body, Preserve (100%) JOB 1 O-037 Cathodic Protection / Zinc Anodes, Renew - ASSET JOB 1 O-038 Impressed Current Cathodic Protection System, Inspect and Maintain JOB 1 O-039 Impressed Current Cathodic Protection System Anodes, Renew JOB 1 O-040 Impressed Current Cathodic Protection System Reference Cells, Renew JOB 1 O-041 Impressed Current Cathodic Protection System Dielectric Shield, Repair JOB 1 D-042 Drydock JOB 1 D-043 Sea Trial Performance, Support, Provide JOB 1 D-044 Main Diesel Engine, Mount, Upgrade JOB 1 D-045 Hydraulic Steering Cooler, Install JOB 1 D-046 Cargo Hatch (Hydraulic), Overhaul and Repair JOB 1 D-047 Strain Gage Alignment, Check JOB 1 D-048 Sea Valves and Waster Pieces, Overhaul or Renew JOB 1 D-049 Superstructure, Preserve "100%" JOB 1 D-050 Exhaust Stacks (Exterior), Preserve - Partial JOB 1 D-051 Temporary Services, Provide - Cutter JOB 1 D-052 Davit Ladder, Renew JOB 1 D-053 Aft Navigation Light Mast , Renew JOB 1 D-054 Quick Acting Watertight Doors, Renew JOB 1 D-055 Vent Pipes, Renew JOB 1 D-056 SORS Cargo Hatch, Repair JOB 1 D-057 Quick Acting Watertight Doors, Upgrade JOB 1 D-058 Buoy Deck Auxiliary Cleat & Snubbing Winch Installation JOB 1 D-059 Shore Power Station, Repair JOB 1 O-00A Composite Labor Rate Hour D-00B GFP Report NSP EA NSP O-00Z Laydays Day Total Price of Definite Items Total price of Optional Items Total All (6) Blocks 25: Accounting and Appropriation Data ACCOUNTING AND APPROPRIATION DATA: To be included on contract award document. (7) Blocks 26: Total Award This contract will obligate all definite (D) work items. The funding for the optional work items will obligated with a contract modification as required. DESCRIPTION OF WORK: (a) The Contractor shall furnish all necessary labor, material, services, equipment, supplies, power, accessories, facilities and such other things as are necessary, except as otherwise specified, to perform dry docking repairs, and alterations to the vessel, in accordance with this solicitation and attached specifications. (b) Failure to read the specifications in their entirety will not relieve the offeror from the responsibility for properly estimating the difficulty or price of successfully performing the work. Failure to do so will be at the offeror's risk. REQUIRED DOCUMENTS: Each offeror shall furnish the information required by the solicitation, which includes: 1. Signed 1449 with offeror's address, DUNS and other information completed. 2. Price Schedule filled out with a cost associated with each CLIN 3. Past Performance Documentation 4. Small Business Self Certification for applicable set-aside (i.e.HUBZone, Small Business, SDVOSB, 8(a)) 5. Welding Certifications and Procedures 6. Proof of Insurance (Statement of Coverage from current Insurance carrier) 7. Dry Dock Facility and or Dry Dock Cradle (if applicable) Certification 8. Pre-Award Dry Dock Calculations for US Coast Guard 225' Seagoing Buoy Tender PLEASE NOTE: QUOTES THAT DO NOT INCLUDE ALL REQUIRED DOCUMENTS MAY BE CONSIDERED INCOMPLETE AND MAY NOT BE CONSIDERED DELIVERABLES: Seven days after the contract has been awarded the contractor will generate a legible planning document as outlined in SFLC Standard Specification 0000 (3.2.5) to the KO and PE for a preliminary government review. At the proposal due date, one (1) copy of the planning document will be submitted to the KO, and all preceding weekly progress meetings. An arrival conference normally will be held within 48 hours of the scheduled start date. ANTICIPATED AWARD DATE: The contract is expected to be awarded on or about 29 September 2015. Work covered by this solicitation shall be completed within seventy-one (71) calendar days from the date the vessel becomes available to the Contractor. The performance period is from 07 October 2015 to 16 December 2015. The availability is scheduled to start on or about 07 October 2015. QUESTIONS AND REQUEST FOR DRAWINGS: The last day to request drawings or ask questions regarding this solicitation is 3 September 2015 at 3:00 PM EST. After this date, further requests may not be accepted due to time constraints. CONTRACT CLAUSES (1) FAR 52.212-4 CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEMS (May 2015) (a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights- (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include- (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, contract line item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective ...

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 811210
Federal
TRS-3D /AN/SPS-75 Radar repairs/ overhaul services
Solicitation # 70Z08526RRJ001B00
The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in 28 days
View Details
NAICS: 333995
Federal
APPLETON CYLINDER
Solicitation # 70Z08526Q40200B00
Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS