Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

UV-Sensitive Item Packaging & Preservation

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires specialized packaging of UV-sensitive gaskets in accordance with MIL-DTL-117 Type II, Class C, Style 1 specifications, using opaque, waterproof, and greaseproof bags to ensure protection against light, moisture, and contaminants. Each package must include desiccant and a moisture barrier to meet Preservation Method 33, ensuring long-term integrity of the gaskets during storage and transport. The packaging standards are strictly defined to maintain performance and reliability in demanding operational environments. This is a subcontract under the NAICS code 322230, issued by the Department of Defense through its LAND SUPPLIER OPNS VEHICLE SPT office, with performance located in Tracy, California, zip code 95304-5000. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. The requirement emphasizes compliance with military packaging standards and focuses on environmental protection for sensitive components, indicating a critical need for precision in material selection and packaging processes to meet defense logistical requirements.

General Info

UV-sensitive gaskets packaged per MIL-DTL-117 Type II, Class C, Style 1 with desiccant and moisture barrier for DoD in Tracy, CA.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

322230 - Stationery Product ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Specialized packaging of UV-sensitive gaskets using opaque, waterproof, greaseproof bags per MIL-DTL-117 Type II, Class C, Style 1, including desiccant and moisture barrier (Preservation Method 33).

Similar Contracts

Same NAICS industry code

ESD-Sensitive Electronic Components Packaging and LabelingThe contract requires the provision of electrostatic discharge compliant packaging and labeling for sensitive electronic components, adhering strictly to MIL-STD-129 and IPC/JEDEC J-STD-609 standards. All packaging must include proper barcoding and special marking code ZZ to ensure traceability and compliance with military and industry specifications for handling ESD-sensitive devices. The work is scoped as a subcontract under the NAICS code 322230, and performance is to be carried out at Columbus, Ohio, with a zip code of 43213. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the contracting activity originating from the Active Devices Division within the Department of Defense.

ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

Sustainable Packaging and Shipping Materials SupplyThe contract titled Sustainable Packaging and Shipping Materials Supply is a small business set-aside under the SBA’s Total Small Business Set-Aside provision, specifically targeting businesses classified under NAICS code 322230 for corrugated and paperboard container manufacturing. It requires the provision of eco-friendly packaging solutions including corrugated boxes, void fill, stretch wrap, and labels, all sourced from recycled or biobased materials to meet sustainability standards. Performance is to be carried out in El Paso, Texas, with a delivery deadline of July 29, 2026, at 2:00 PM, following a posting date of July 24, 2026. The contracting office is the Mission Support Contracting Division under the Department of Homeland Security, though no specific point of contact or full address details are provided. The opportunity is issued as a subcontract and cannot be accessed without visiting the provided SAM gov link for full submission requirements and documentation.

Mission Support Contracting Division

POSTED

DEADLINE

The Hamilton GroupThe Department on Disability Services in the District of Columbia has issued a forecast for custom envelopes under a procurement initiative dated July 23, 2026. This action is preliminary and intended to provide vendors with advanced notice of an upcoming requirement, though no solicitation number has been assigned yet and no formal bidding process has been initiated. The contract is not currently designated with a specific set-aside classification, and there are no assigned NAICS codes or organizational type specifications. The place of performance and agency office address details remain unspecified, and no point of contact information has been provided. Interested parties should monitor the official procurement portal for updates and future solicitation releases.

Department on Disability Services (DDS)

POSTED

DEADLINE

EnvelopesThe District of Columbia Department of Motor Vehicles is forecasting a future procurement for customized mailing envelopes, with the opportunity posted on July 23, 2026. This forecast is intended to inform potential vendors of an upcoming requirement, though no solicitation number has been assigned yet and the contract type remains classified as a forecast without specific set-aside provisions or NAICS code identified. The envelopes are expected to be tailored to meet the agency’s operational needs, likely for official correspondence, notices, or service-related mailings. Performance of the contract will be located within the District of Columbia, though no specific city or address has been designated, and there is no point of contact listed for inquiries. Interested parties should monitor the official procurement portal for upcoming solicitations to submit bids when the formal request is released.

Motor Vehicles (DMV)

POSTED

DEADLINE

Card stockThe District of Columbia’s Chief Technology Office is forecasting a future procurement for card stock, with the opportunity posted on July 23, 2026. This is a forecasted requirement and not yet an active solicitation, meaning no formal bidding process has begun. The contract does not specify a solicitation number, set-aside type, NAICS code, or organization type, indicating that details are still under development. The place of performance and office address lack specific location data, suggesting the exact delivery or service location has not been finalized. There is no designated point of contact listed, which is common for forecasted listings as the procurement team may not yet be available for inquiries. Interested parties should monitor the official portal at the provided UI link for updates leading to a formal solicitation.

Chief Technology Officer (OCTO)

POSTED

DEADLINE

Defense Logistics Packaging and Palletization SupplierThe contract seeks suppliers to provide military-compliant packaging materials essential for the preservation and protection of defense shipments, including desiccants, moisture barriers, and corrosion inhibitors, all in strict alignment with DLA RP001 and MIL-STD-129 specifications. These materials are critical to ensuring the integrity and longevity of munitions, equipment, and components during storage and transit under harsh environmental conditions. The requirements emphasize adherence to federal military standards for packaging, labeling, and palletization to maintain operational readiness and interoperability across U.S. defense supply chains. The solicitation is issued under NAICS code 322230 and is classified as a subcontract, with responses due by August 3, 2026. Performance is designated for Keyport, Washington, ZIP 98345-7610, indicating the primary logistics and distribution hub for this effort. The contracting entity is the Fluid Handling Division within the Department of Defense, which manages specialized packaging systems for sensitive defense assets. While no set-aside preference is indicated, compliance with all technical, quality, and documentation standards is mandatory, and suppliers must be prepared to support large-scale, just-in-time delivery requirements within a highly regulated defense logistics environment.

FLUID HANDLING DIVISION

POSTED

DEADLINE

TAPE, PRESSURE SENSIThe contract is for 4 rolling units (RO), each equal to 180 feet, of 2-inch wide pressure-sensitive tape with part number 743-BLK-2 and NSN 7510-01-553-3457. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, and vendors must label all packages with the proper shelf-life dates prior to shipment. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life items, and palletization must adhere to DLA packaging requirements. The item is subject to technical and quality standards referenced in the DLA Master List, and covered defense information requirements apply. Delivery is required within five days of award, FOB origin, and must be shipped via the fastest traceable means—parcel post is prohibited. The delivery destination is specified as the Fleet Readiness Center East in Cherry Point, NC, with a required delivery date of July 23, 2026. The contract is under solicitation SPE8EN-26-T-2671, with a response deadline of August 3, 2026, and includes a zero tolerance for quantity variance. The vendor is responsible for full documentation, including source approval requirements, and must ensure compliance with all applicable defense logistics agency provisions.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Custom Presentation Folder ManufacturingThe contract calls for the manufacture of navy blue presentation folders measuring 8.5 inches by 11 inches, specifically designed for the Department of Veterans Affairs, to be produced with an embossed VA logo and enhanced document retention features to ensure secure handling and storage of official materials. These folders are intended for use within the National Cemetery Administration under the Department of Veterans Affairs, aligning with branding and functional requirements for official documentation. All manufacturing must meet specified aesthetic, durability, and security standards to support consistent institutional identity and operational efficiency. The solicitation is classified as a subcontract with a NAICS code of 322230, indicating the production of paper and paperboard containers. The opportunity was posted on July 22, 2026, with a response deadline of July 30, 2026, at 7:00 PM. While no set-aside designation or point of contact information is provided, the place of performance and other administrative details remain unspecified, indicating that production may be conducted at the supplier’s facility. Interested parties must submit proposals prior to the deadline to be considered for this procurement opportunity through the SAM.gov platform.

National Cemetery Administration (36C786)

POSTED

DEADLINE

9930--Sources Sought Notice - Presidential Memorial Certificate (PMC) HoldersThe Department of Veterans Affairs, through the National Cemetery Administration, is seeking market information for the manufacture, packaging, and nationwide delivery of custom navy blue Presidential Memorial Certificate (PMC) holders, which are designed to securely hold an 8.5-inch by 11-inch certificate with interior retention and protective acetate inserts, featuring a custom embossed VA logo. This effort is conducted under a Sources Sought Notice bearing solicitation number 36C78626Q0092, posted on July 22, 2026, with responses due by July 30, 2026, at 2:00 p.m. CST. The government intends to award an Indefinite-Delivery/Indefinite-Quantity (IDIQ) contract with a one-year base period and four optional one-year periods, requiring recurring monthly deliveries to VA National Cemeteries across the United States with variable quantities determined by need. The requirement falls under NAICS code 322230, with a size standard of 750 employees, and may be set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) or Veteran-Owned Small Businesses (VOSB) under 38 U.S.C. §8127, with offerors required to self-certify their business size and socioeconomic status including Small Business, HUBZone, 8(a), Woman-Owned, or Large Business classifications. Respondents must provide their Unique Entity ID or CAGE code, disclose whether they are the manufacturer, authorized distributor, or reseller, and identify the actual manufacturer if not the responding entity. Additional disclosures are required if participating in a joint venture or planning to subcontract, including ownership structure and scope of subcontracted work. Past performance must be demonstrated through examples of similar products delivered within the last five years, with customer names, contract numbers, annual volumes, and delivery locations provided. Packaging must ensure product protection during nationwide shipping, but no formal MIL-STD, humidity controls, or corrosion inhibitors are mandated, and no barcoding or traceability labeling is specified. There are no defined inspection standards beyond adherence to product specifications; inspection likely occurs at the contractor’s facility prior to shipment, with final acceptance occurring at VA cemetery delivery points. Submissions must be sent via email to Weston.Worsham@va.gov, and no formal pricing, CLINs, or contract value is provided since this is a pre-solicitation market research action meant to inform future procurement

National Cemetery Administration (36C786)

POSTED

DEADLINE

Supply of Screw Cap Jars (NSN: 8125011325407)The contract calls for the supply and delivery of 50 units of plastic screw cap jars identified by NSN 8125011325407, with all packaging, labeling, shipping, and documentation required to meet federal and defense standards. The items must be furnished in full compliance with military specifications to ensure compatibility, integrity, and traceability within the defense supply chain. Delivery is mandated to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, and the work is classified under NAICS code 322230 for plastic packaging manufacturing. The solicitation was posted on July 21, 2026, with a firm response deadline of August 3, 2026, and is structured as a subcontract under the Department of Defense, specifically managed by the Construction & Equipment Containers organization. All submissions must adhere to the contractual obligations defined by defense procurement regulations, including proper documentation and compliance with logistics and labeling protocols. The contract opportunity is accessible via the DIBBS platform, and contractors are expected to demonstrate full capability to meet quality, timing, and regulatory requirements without deviation.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Environmentally Compliant Packaging & Handling MaterialsThe contract requires the supply of packaging materials that comply with MIL-STD-129 standards, specifically designed for handling petroleum-contaminated materials with contaminant levels at or below 3 percent. These materials must include containers, labels, and wraps that are environmentally compliant and engineered to meet the rigorous logistical demands of the Department of Defense. The packaging must be fully compatible with DoD supply chain protocols to ensure seamless integration into military logistics operations without disruption or noncompliance risks. Deliverables are governed under NAICS code 322230,indicating the focus on paper and paperboard container manufacturing, and the contract is structured as a subcontract under the Defense Logistics Agency. The solicitation was posted in July 2026 with no stated set-aside provisions, making it open to qualified vendors without restriction based on business size or ownership. The place of performance and agency address details are not specified, but all materials must be delivered and managed through established DLA channels as referenced by the provided contract and delivery identifiers.

Defense Logistics Agency

POSTED

DEADLINE

ESD-Sensitive Packaging and Preservation ServicesThe contract entails the design and supply of electrostatic discharge and electromagnetic interference protective packaging specifically for the safe delivery of microcircuits, adhering strictly to MIL-PRF-81705 standards for barrier materials and A-A-59136 specifications for cushioning. These materials are critical to ensuring the integrity and functionality of sensitive electronic components during transportation and storage by preventing damage from static electricity and electromagnetic fields. The packaging solution must meet exacting military performance criteria to guarantee reliability in defense and aerospace applications. The work is being procured as a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance required to take place in Columbus, Ohio, at the zip code 43213. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. The North American Industry Classification System code 322230 indicates the procurement is aligned with manufacturing activities related to paperboard container and packaging production, emphasizing the industrial nature of the required packaging development and supply. This contract supports critical defense logistics infrastructure by ensuring components remain shielded from environmental threats throughout the supply chain.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

LEVER, GUIDE VANEOfferors must not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016 in performance of any award under this solicitation. Domestic material restrictions under the Berry Amendment and Buy American Act apply, with the Berry Amendment threshold lowered to $150,000, requiring strict compliance and disclosure of any non-domestic materials used. Small business joint ventures must submit specific certifications for eligibility under designated small business categories. Quotations must include quantity ranges due to fluctuating demand and frequent changes in purchase requests, as manual evaluation may allow for consolidation or reduction without resolicitation; this does not apply to Auto IDC. All offerors are strongly encouraged to submit a “No Bid” through DIBBS if unable to respond by the closing date to prevent assumptions of non-procurability and reduce administrative burden. Vendors must register via DLA’s AMPS system within two months to gain access to the Vendor Shipment Module, and those using VSM WebServices must update their internal schema by the specified deadline to maintain shipping capability. Additive manufacturing is prohibited unless explicitly authorized, and any offer containing AM-produced items will be deemed noncompliant and ineligible for award unless prior approval is sought. The solicitation is for 444 units of a lever guide vane with NSN 3040-01-449-4345, to be delivered within 165 days of order, with a response deadline of August 6, 2026. Fast Pay is not applicable. APEX Accelerators offer free assistance to businesses seeking government contracting opportunities. The point of contact for inquiries is Benita Umoren at benita.umoren@dla.mil.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

STAND, VEHICLE SUPPOThis contract is for the procurement of a vehicle stand under solicitation SPE7L3-26-U-0645, issued by the Department of Defense’s Land Supplier Operations Vehicle Support office. The item is identified by NSN 4910-00-251-8013 and is part of a total small business set-aside, with a required delivery quantity of 157 units under the unit of issue PR. Delivery is required within 83 days FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, governed by DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. Palletization must follow RP001 DLA Packaging Requirements, and all materials must exclude Class I ozone-depleting chemicals without prior approval. The solicitation closed on August 10, 2026, and the contract is managed by Aaron Moore, with contact details provided. All technical and quality specifications referenced are defined in the DLA Master List, and the unit of issue aligns with DoD standards as documented in authorized DLA resources.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

CYLINDER ASSEMBLY, AThe contract is for one cylinder assembly, part number AG172707BB, with NSN 3040-01-411-4886, to be delivered within 20 days FOB origin to Fort Stewart, Georgia. The item is procured under solicitation SPE7L3-26-T-134J and must comply with all DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements. All materials supplied must be free from Class I ozone-depleting chemicals and严禁 the intentional addition of mercury or mercury-containing compounds, except for approved functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or specific chemical reagents as defined by NAVSEA; portable devices containing mercury must have shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Preservation and packaging must follow the latest revision of MIL-S-196 for engine repair parts, with preservation method ZZ requiring Level A preservation, and all packaging, preservation, and marking must strictly exclude mercury or mercury compounds. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must meet DLA packaging requirements. The delivery is non-negotiable with zero variance allowed, inspection and acceptance occur at destination, and shipment must use the fastest traceable method—parcel post is prohibited. The item is to be delivered to the designated military distribution point, with a required delivery date of July 21, 2026, and must be marked with the specified government control codes and shipping references including the TCN and RDD.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

COMPUTER, SPECIAL PUThe contract is for one unit of a special-purpose computer identified by NSN 2541-01-694-4944, issued under solicitation SPE7L3-26-T-133X with a response deadline of August 6, 2026, and a required delivery within five days after award. The item falls under NAICS code 336390 and is procured by the Department of Defense through the Land Supplier Ops Vehicle Support office. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item is exempt from the First Destination Packaging Program and is not eligible for standard commercial packaging. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval unless explicitly permitted by the specification. All supplied items must be asbestos-free; any alternative materials must be approved per Clause L30 and Provision 4 conditions. Point of contact for inquiries is Kayla Buchanan, with direct email and phone provided for communication.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

SEAL, PLAINThe contract specifies the procurement of a plain seal with NSN 5330015451450 under solicitation SPE7L3-26-T-133Z, requiring a total quantity of 11 units divided into two line items: three units for delivery to Albany, Georgia, and eight units for delivery to New Cumberland, Pennsylvania. All items must be delivered within 33 days of contract award, with FOB origin terms, no quantity variance allowed, and inspection and acceptance occurring at the destination. The seal must be free of asbestos as defined by FED-STD-313 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation, wrapping, cushioning, and container requirements. Marking must adhere to MIL-STD-129 with the special instruction “Do not bend,” and palletization must conform to DLA packaging requirements. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control dependent on acquisition size and amendment dates. The unit of issue is each (EA), and delivery must meet the required ship dates of August 1, 2026, for New Cumberland and November 25, 2026, for Albany, with the original delivery deadline set for September 9, 2026. Shipping instructions, freight addresses, and transportation procedures are clearly delineated, and the point of contact for inquiries is Susan Diamond at the Department of Defense.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

PARTS KIT, RADIATORThe contract is for a Parts Kit, Radiator with NSN 2930-01-731-9795 and part number CTK5029-4 supplied by Baldwin Filters Inc, requiring two units to be delivered within 20 days from the date of order under solicitation SPE7L3-26-T-134M. All supplies must fully comply with the latest revision of MIL-STD-2073-1E Appendix D for kit packaging and MIL-STD-129 for labeling, with no tolerance for quantity variance—exactly two units are required. Packaging must adhere to DLA specifications including preservation methods, container types, and marking requirements, with special codes specified as ZZ-ZZ for unique handling instructions. The delivery is FOB origin and inspection and acceptance occur at the destination, with shipment required via the fastest traceable means, explicitly prohibiting parcel post. The destination for delivery is Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville NC, with both a parcel post address and a freight shipping address provided, the latter to be used. The contract references technical and quality requirements from the DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all terms are governed by the version of the master in effect on the solicitation issue date. The required delivery date is July 21, 2026, and the point of contact for inquiries is Lee Miller with the Department of Defense.

Other Engine Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

BRAKE LINING KITThe contract is for a Brake Lining Kit designated for use on a Crane Carrier, with the NSN/Part Number 2530-01-156-0448 and a quantity of two thousand units. The solicitation, identified as SPE7L3-26-T-134H, was posted on July 26, 2026, with a response deadline of August 6, 2026. All supplied items must be free of asbestos, and any prior components containing asbestos are strictly unacceptable. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA web portal, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The material must comply with Clause L30 and Provision 4 for alternative material approval. Delivery is required within ten days after award, and the place of performance is designated as Fort Hood, Texas, with a ZIP code of 76544-0000. The contracting office falls under the Department of Defense, specifically the Land Supplier Operations Vehicle Support, with Lee Miller listed as the primary point of contact for inquiries.

Motor Vehicle Brake System Manufacturing

POSTED

about 23 hours ago

DEADLINE

BOOT, VEHICULAR COMPThis contract pertains to the procurement of two vehicular compound boots, identified by NSN 2530012727444 and part number 1681296C91, under solicitation SPE7L3-26-T-134K. The item must be delivered within ten days to the designated military address in Drawsko Pomorskie, Poland, with delivery terms set at FOB origin and no tolerance for quantity variance. All packaging and labeling must comply with MIL-STD-129 and DLA’s Packaging Requirements for Procurement (RP001), and the materials must be packaged according to ASTM D3951 unless deemed hazardous under Fed-Std-313, in which case TQ requirement IP025 applies. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and ozone-depleting chemicals are strictly prohibited. The boots must be marked with the specified military routing identifier and shipped via the fastest traceable method, excluding parcel post. Acceptance and inspection occur at the destination, and the unit of issue is each (EA) with a total price of $2.00 per unit. The requirement is associated with a project code, government tracking identifiers, and a delivery deadline of July 22, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

SEAL, GASThe contract pertains to the procurement of 63 units of a GAS SEAL with NSN 5330-00-975-0888 under solicitation SPE7L3-26-T-134N, issued by the Department of Defense through the Land Supplier Operations Vehicle Support agency. The items must be free of asbestos, and any alternative materials require approval per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. Covered Defense Information provisions apply, and items must be marked in accordance with MIL-STD-130N dated November 16, 2012. The delivery date is set for 161 days after order, with performance occurring in Bremerton, Washington, 98314-6001. Responses are due by August 6, 2026, and the primary point of contact is Susan Diamond, reachable via email and phone provided.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

PACKING, PREFORMEDThe contract specifies the procurement of 44 units of preformed packing under solicitation number SPE7L3-26-T-134S, with a delivery deadline of 81 days after award. The item, identified by NSN 5330-00-103-8342, must be packaged in a medium duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, particularly for items with Federal Supply Classifications 5330/5331 that contain vulnerable identification markings. This packaging requirement applies to direct vendor deliveries, foreign military sales, and stock shipments. The contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition magnitude. Strict prohibitions against intentional addition or direct contact of mercury or mercury compounds apply, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA; portable devices containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Asbestos is strictly prohibited in all supplied items, and any alternative materials must be approved under Clause L30 and Provision 4 conditions. The point of contact for inquiries is Susan Diamond, with responses due by August 6, 2026, and the place of performance is New Cumberland, Pennsylvania.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

PACKING, PREFORMEDThe contract pertains to the procurement of 82 units of preformed packing, identified by NSN 5330-01-210-2928, under solicitation SPE7L3-26-U-0646, issued by the Defense Logistics Agency’s Land Supplier Operations Vehicle Support office. The item is classified as a commercial item and must be packaged in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to safeguard against UV degradation. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including Unique Item Identification (UID) and barcoding per MIL-STD-130N, with mandatory Type I shelf life marking. Delivery is required 97 days after order placement under FOB Origin terms, with final inspection and acceptance occurring at the destination. The item must be free of asbestos, ozone-depleting chemicals, and intentionally added mercury, except for exempted uses with secondary containment. The contract value is capped at $350,000 as an indefinite delivery contract, with a per-unit price of $25.25 for the specified quantity. Contract compliance mandates adherence to cybersecurity requirements including CMMC Level 2 certification through a C3PAO, implementation of NIST SP 800-171 controls per FAR 252.204-7012, and prohibition of covered telecommunications equipment under 252.204-7018. Contractors must also comply with clauses addressing trafficking in persons, employment eligibility, sustainable products, hazardous materials labeling under 29 CFR 1910.1200, and whistleblower protections. Subcontractors must flow down applicable cybersecurity and hazardous material clauses. All proposals must be submitted electronically through the DLA DIBBS portal by August 10, 2026, with the government maintaining control over acceptance and payment via WAWF. No evaluation weights are specified, and award is anticipated based on price and conformity to technical and regulatory requirements, with potential adjustment for socioeconomic program preferences if applicable.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

GASKETThe contract pertains to the procurement of 18 gaskets with NSN/Part Number 5330-01-262-6764 under solicitation SPE7L3-26-T-134A, issued by the Department of Defense’s Land Supplier Operations Vehicle Support. The requirement is for delivery within 165 days after order, with responses due by August 6, 2026. All items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. The contract incorporates technical and quality requirements from the DLA Master List, with revisions governed by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Packaging must adhere to DLA standards, and configuration changes require formal engineering change proposals or variance requests. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Components must originate from qualified manufacturers or products listed on official QPL/QML lists as defined in procurement note H02. The place of performance is Tracy, California, 95304-5000, with Susan Diamond as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE