Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicle Recompete: Idc SPE4A621DC094

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Indefinite Delivery Contract SPE4A621DC094 is a Department of Defense agreement managed by DLA Aviation for the procurement of tapered roller bearings and related components. The contract has an overall ceiling value of 2,133,675.89 dollars and is currently categorized as a likely recompete. The ordering period for this vehicle is scheduled to conclude on June 10, 2026. The contract does not utilize a specific set-aside and falls under NAICS code 332991. Historical task order data shows significant activity with The Timken Corporation, with individual orders for tapered roller bearings and cone rollers ranging from approximately 26,985 dollars to 74,916 dollars.

General Info

Contract for tapered roller bearings procurement by DLA Aviation, totaling $2.13M, ending June 2026.

Agency

Department Of Defense → DLA Aviation

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedDec 10

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Idc vehicle SPE4A621DC094 ordering period ends 2026-06-10T00:00:00.000Z. 0 active task orders valued at $0.
4610075686!cup,tapered roller bearing Original Solicitation: SPE4A621RX490 IDV Ceiling: $2,133,675.89 Set-Aside: No set aside used. Contracting Office: DLA Aviation Agencies: Department of Defense Classification: recompete-likely (Confidence: medium - 60/100)
Top task orders by value: - 8510274250!CUP,TAPERED ROLLER ($74,916.96) - THE TIMKEN CORPORATION - 8510641137!CUP,TAPERED ROLLER ($59,033.83) - THE TIMKEN CORPORATION - 8511393087!CUP,TAPERED ROLLER ($45,294.24) - THE TIMKEN CORPORATION - 8511281874!CUP,TAPERED ROLLER ($39,809.76) - THE TIMKEN CORPORATION - 8510985587!CONE AND ROLLERS,TA ($26,985.21) - THE TIMKEN CORPORATION

Similar Contracts

Same NAICS industry code

Supply of Ball Joints (NSN 3040218786687)This subcontract involves the procurement of 298 units of ball joint hardware, identified by NSN 3040218786687, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing new components that strictly adhere to technical specifications, with a clear prohibition against the use of reconditioned or surplus items. The contract mandates strict adherence to military standards for logistics and compliance, specifically requiring packaging per MIL-STD-2073-1E and RP001, and shipment marking according to MIL-STD-129. Additionally, the provider must comply with DFARS 252.223-7008 and 252.225-7007 regulations. This requirement is managed by the DLA Weapons Support Strategic Acquisition Program Directorate under the Department of Defense.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

Supplier of Collet Bodies for Linde Welding TorchesThis subcontract involves the supply of 239 welding torch collet bodies and gas lens collet bodies to prime contractors supporting the Defense Logistics Agency Weapons Support Nuclear Reactor Program. The required parts must be compatible with Linde Model HW-20 and HW-25 Torches and match NSN 3431001236684. Performance will take place in San Diego, California, under NAICS code 332991. The supplier is required to adhere to strict quality and regulatory standards, including Critical Application Item specifications and Buy American DFARS 252.225-7001 standards. Additionally, all shipments must comply with MIL-STD-129 marking requirements. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

Fluid Pressure Line Connector SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, requires the procurement of one fluid pressure line multiple connector identified by NSN 4730014749295. The selected source or manufacturer must ensure the item is packaged according to ASTM D3951 standards and marked and labeled in compliance with MIL-STD-129. The physical unit must be delivered to Fort Benning, Georgia, within five days of the contract award. This requirement falls under NAICS code 332991 and is intended for prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

Actuator Bearing Assembly ManufacturingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture and assembly of 56 Actuator Bearing Assemblies. The selected contractor must utilize high-precision CNC machining to produce components according to Reference Drawing NR 98752 and ensure all final units are assembled in strict compliance with TDP Rev B Gen 2 and SAE AS9100 standards. As part of the quality assurance process, the contractor is required to perform a First Article Test on one unit and submit the corresponding test reports. The project is designated as a Total Small Business Set-Aside under NAICS code 332991, with the place of performance located at Hill AFB. Interested parties must respond by November 5, 2026, to be considered for this precision manufacturing effort.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Annular Ball Bearing Supplier (NSN 3110124080222)This subcontract involves the manufacture or sourcing of four annular ball bearings under NSN 3110124080222 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All components must adhere to MIL-DTL-197M quality standards, with specific requirements for marking according to MIL-STD-129 and packaging per RP001 and MIL-STD-2073-1E. Additionally, the supplier must provide domestic sourcing certification in compliance with DFARS 252.225-7016. The completed bearings are to be delivered FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 5, 2026, for this requirement categorized under NAICS code 332991.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Aluminum Alloy Tubing SupplierThis subcontract involves the supply of raw aluminum alloy tubing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The required material must feature a 1/2 inch outer diameter and a 0.062 inch wall thickness, ensuring full compliance with Pratt & Whitney Canada Corp part number 3014948. Performance will take place in Cherry Point, North Carolina. To ensure quality and regulatory adherence, the supplier must comply with the Buy American Act and provide comprehensive material certifications and mill test reports to verify the alloy composition and dimensions. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement under NAICS code 332991.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Ball Bearing Retainer / Bearing Cage Assembly SupplierThis subcontract involves the supply of two precision-manufactured ball bearing cage assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be manufactured to NSN 3110015292375 specifications in strict accordance with the DLA Master List of Technical and Quality Requirements. To ensure defense-grade tolerances, the supplier must utilize precision machining equipment and maintain full compliance with the Buy American Act. Quality assurance is a critical requirement, necessitating the use of zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The project is categorized under NAICS code 332991, with the place of performance located at Joint Base Anacostia. Interested parties must adhere to the response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BEARING, ROLLER, CYLINDR

Solicitation # SPE4A6-27-T-7464

Solicitation SPE4A6-27-T-7464 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of 15 cylindrical roller bearings, identified by NSN 3110001557351. The contract requires delivery within 151 days after order, with FOB and inspection/acceptance points set at the origin. Technical compliance is governed by basic CID A-A-55602B and QAP 13873, with a specific recommendation to use MIL-P-197H for preservation and packaging until further notice. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. A critical requirement of this procurement is the restriction on the acquisition of ball and roller bearings per DFARS 252.225-7016, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Offerors must provide a contractor's declaration regarding the domestic or foreign nature of the material. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Packaging and marking must adhere to MIL-STD-129 and MIL-DTL-197M, and all payment requests must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

CLOTH, FOCUSING, PHOTOGR

Solicitation # SPE8EN-27-T-0224

Solicitation SPE8EN-27-T-0224 is a request for quotations issued by DLA Troop Support for the procurement of 50 units of photographic focusing cloth, identified by NSN 6760-01-377-5709. The contract specifies a delivery timeframe of 94 days after order, with a need ship date of February 12, 2027, and a required delivery date of March 4, 2027. Shipping is established as FOB Origin under the First Destination Transportation program, with the delivery destination set as the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA Master List technical requirements and RP001 packaging requirements. Key regulatory obligations include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. The solicitation is categorized under NAICS code 332991 and requires offerors to maintain active registration in the System for Award Management.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 17 hours ago

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-T-7457

Solicitation SPE4A6-27-T-7457, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for the procurement of four annular ball bearings under NSN 3110124080222. The requirement specifies a delivery period of 72 days after order, with a need ship date of January 17, 2027, and a final required delivery date of June 1, 2027. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Strict domestic sourcing restrictions apply per DFARS 252.225-7016, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Technical compliance requires adherence to MIL-DTL-197M for quality assurance and preservation, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-R-X128

Solicitation SPE4A6-27-R-X128 is a small business set-aside for the procurement of one annular ball bearing, part number 3110-01-034-7002, designated as a critical application item. The contract is a firm fixed price award with a delivery requirement of 184 days after the order date, shipped FOB destination. Technical compliance is governed by TDP Rev A Gen 1 and Basic QAP 13873 QAP-B02 Revision B, with quality standards adhering to ISO 9001:2015. Packaging, preservation, and marking must comply with MIL-DTL-197M, MIL-STD-129, and MIL-STD-2073-1E, while palletization must follow DLA requirement RP001. A critical sourcing restriction applies under DFARS 252.225-7016, requiring the bearing to be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total cost of the bearing components originating from these regions. Offerors must provide a signed Contractor’s Declaration regarding the domestic or foreign nature of the material to be considered for award. The government will determine the best value based on a comparative assessment of price, past performance, and delivery, with SPRS assessments weighted most heavily within the past performance evaluation. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BEARING, ROLLER, CYLINDR

Solicitation # SPE4A6-27-T-7350

Solicitation SPE4A6-27-T-7350 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of 41 cylindrical roller bearings, identified by NSN 3110-01-446-5157. The items are designated as critical application items and must be delivered FOB Origin within 151 days, with a required delivery date of March 20, 2027. Inspection and acceptance will occur at the destination. A primary requirement of this contract is strict domestic sourcing; awards will only be made for bearings manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds. Technical compliance is governed by MIL-DTL-197M for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Quality assurance requires adherence to the DLA Master List of Technical and Quality Requirements and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

U.S. Army Long Range Precision Munition Launched Effects Medium Range-Lethal Prototype Integration and Qualification

Solicitation # 11e09f87-099d-4282-abc4-f6a4ce589397

POSTED

about 17 hours ago

DEADLINE

AIR FORCE CRYPTOLOGIC OFFICE COMMERCIAL SOLUTIONS OPENING

Solicitation # FA7037-21-S-C001

The Air Force Cryptologic Office (AFCO) Cyberspace Intelligence Surveillance and Reconnaissance and Multi-Domain Innovation Division is soliciting innovative commercial capabilities through Commercial Solutions Opening FA7037-21-S-C001. The agency is seeking mature technologies and innovative services in Electromagnetic Warfare, Information Operations, and electromagnetic digital communications, with a specific goal of achieving a field demonstration within one year. The procurement process is divided into two phases: Phase I requires the submission of a quad chart and a white paper, while Phase II consists of full proposals by invitation only. Awards may be issued as traditional contracts or Other Transactions (OT), with potential funding ranging from 50,000 dollars to 50 million dollars over a period of performance lasting between one and five years. The evaluation process is based on technical merit, importance to agency programs, and fund availability, utilizing peer or scientific review to select offerors. Successful projects are expected to follow a structure of base period tasks to demonstrate feasibility, followed by option tasks for design, fabrication, testing, and evaluation. Because the work supports DoD ISR-Cyber capabilities, offerors must possess the necessary personnel and facility security clearances to handle classified work independently. All acquired technologies are treated as commercial items under 10 USC 3458 and DFARS 212.70. Submissions are managed by Carissa Heuertz, and the performance location is identified as San Antonio, Texas.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

USSF SLD 30: Integrated Development Planning and Environmental Readiness Process Prototype

Solicitation # 61fb4c07-b7d0-4646-987e-dbc1c624d7cf

Space Launch Delta 30 is seeking industry, academic, and non-profit partners to prototype an integrated development planning and environmental readiness process. The goal is to replace the Department of the Air Force's fragmented legacy planning system, which currently takes over nine months to produce low-fidelity concepts, with a unified methodology. This effort focuses on the creation of a repeatable business process rather than physical construction or facility delivery. The objective is to utilize agile design charrettes and concurrent environmental analysis to compress the planning lifecycle, aiming to produce a high-fidelity 30% to 35% conceptual planning package and complete environmental documentation in under five months. This multi-phase prototype begins with Phase I, focusing on Small-Scale Project Process Prototype support for SLC-9. The final deliverable is a government-owned Technical Data Package that codifies this accelerated planning process.

Environmental Consulting Services

POSTED

DEADLINE

Tactical ISR Processing, Exploitation and Dissemination (PED): Adaptive AI and Autonomy at the Tactical Edge

Solicitation # 1f829fd0-4f36-4a90-a3b7-d05d41483223

The National Geospatial-Intelligence Agency is seeking prototype solutions under an Other Transaction Authority vehicle to develop edge-deployable computer vision capabilities for unclassified small unmanned aerial systems. The primary goal is to enable sustained tactical intelligence, surveillance, and reconnaissance operations in contested and austere environments where connectivity is limited. By focusing on object detection, tracking, and re-identification, the project aims to eliminate the current dependency on enterprise cloud infrastructure for model retraining, allowing warfighters to maintain continuous custody of objects of interest. The required solution must utilize low-shot learning approaches, enabling operators with minimal coding expertise to adapt models at the point of need using limited labeled data on size, weight, and power constrained hardware. Success will be measured by specific precision, recall, and F1 thresholds, as well as the ability to re-identify objects after a loss of custody. To ensure operational utility, the prototype must integrate with standard GEOINT data formats, REST API architectures, and tactical dissemination systems such as the TAK ecosystem.

Computer Systems Design Services

POSTED

DEADLINE

Development and Implementation of a Tactical Innovation Training Program for XVIII Airborne Corps Division

Solicitation # 86085f9a-9f52-4cb7-849f-ebf46cc5b296

The XVIII Airborne Corps is seeking a partner to co-develop and implement a comprehensive tactical innovation training program designed to operationalize innovation within Division innovation labs. The initiative aims to bridge a critical capability gap by establishing a formalized, scalable framework that empowers Soldiers to serve as tactical innovation officers. Participants will be trained in essential methodologies, including problem identification, experimentation, modernization pathways, defense acquisition, and program management, to ensure the organization can systematically solve complex operational challenges from the tactical level up. The required training program will consist of a blended learning approach, featuring approximately three to four months of remote instruction culminating in a mandatory in-person intensive scheduled for December 7-11. The selected partner must tailor the curriculum to align with specific organizational priorities and operational requirements, utilizing practical exercises and facilitation to ensure actionable results. The ultimate goal is to build a sustainable internal capacity for structured problem-solving that enhances mission effectiveness and maintains a competitive operational advantage.

Professional and Management Development Training

POSTED

DEADLINE

Fuel System RelocationThis subcontract involves the relocation of existing fuel infrastructure for prime contractors working on USACE Alaska District projects under the Department of Defense. The primary scope of work is the relocation of Pumphouse 3 Truck Fill Stand to make way for new facility construction, with the ultimate goal of delivering a fully operational stand. The project falls under NAICS code 238990 and requires specialized certification for the handling of active fuel lines and pumps. Interested parties should note the response deadline of October 29, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 13 hours

Paving & Exterior Site ImprovementsThis subcontract for Paving and Exterior Site Improvements involves performing specialized exterior site work for prime contractors on USACE Alaska District projects under the Department of Defense. The scope of work includes paving organizational vehicle parking and vehicle inspection lanes, installing storm drainage systems, and erecting secure perimeter fencing and signage. All construction must adhere to strict cold-weather specifications to ensure durability in the local environment. The project falls under NAICS code 237310 and requires the delivery of fully completed parking facilities, drainage infrastructure, and secure fencing. Interested parties should note the response deadline of October 29, 2026, following the posting date of October 22, 2026.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

in about 13 hours

Cold Climate HVAC & Mechanical SystemsThis subcontract opportunity, titled Cold Climate HVAC & Mechanical Systems, involves the installation of self-contained heating, ventilation, and air conditioning systems for prime contractors working on USACE Alaska District projects. The scope of work focuses on delivering fully operational climate control systems utilizing HVAC units specifically engineered for Climate Zone 7 extreme cold to guarantee continuous 24-hour all-weather operation. Managed under the Department of Defense with NAICS code 238220, the project was posted on October 22, 2026, with a response deadline of October 29, 2026. The contract ensures that critical infrastructure in extreme environments maintains necessary temperature controls through specialized mechanical installations.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 13 hours

Electrical & Secure Communications SystemsThis subcontract for Electrical and Secure Communications Systems supports prime contractors on USACE Alaska District projects under the Department of Defense. The scope of work involves the installation of an operational electrical grid, including 480V forklift charging stations, and the establishment of a certified secure data network. Key technical requirements include the installation of NIPR and SIPR connectivity and the implementation of cybersecurity measures across four distinct platforms. Due to the sensitive nature of the SIPR installation, personnel are required to hold a Secret security clearance. The project falls under NAICS code 238210 and focuses on delivering critical infrastructure and secure communications capabilities. The solicitation was posted on October 22, 2026, with a response deadline of October 29, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 13 hours

Plumbing & Environmental Water SystemsThis subcontract for Plumbing and Environmental Water Systems involves the installation of plumbing systems and specialized industrial water treatment equipment for prime contractors operating on USACE Alaska District projects. The primary scope of work includes the installation of an indoor wash rack and the integration of an oil-water separator system, ensuring all components are fully operational and compliant with EPA and Army regulations. Managed under the Department of Defense with NAICS code 238220, the project focuses on delivering a complete vehicle wash rack and environmental water management system. Interested parties should note the response deadline of October 29, 2026, to provide services for this specialized infrastructure requirement.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 13 hours

Industrial Flooring & Material Handling InstallationThis subcontract involves the installation of heavy-duty industrial flooring and specialized material handling systems for prime contractors operating on USACE Alaska District projects. The scope of work specifically requires the installation of a rollerized scale designed for a three-pallet train along with 463L pallet storage racks. The primary objective is to deliver a fully operational rollerized scale and completed pallet racking systems. This Department of Defense project falls under NAICS code 238990 and was posted on October 22, 2026, with a response deadline of October 29, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 13 hours

Site Preparation & Environmental RemediationThis subcontract opportunity with the Department of Defense focuses on site preparation and environmental remediation for USACE Alaska District projects. The scope of work involves performing site clearing, grading, and soil remediation, specifically targeting the excavation and removal of contaminated soil from previously developed lands. Additionally, the contractor will be responsible for site grading for parking areas and vehicle inspection lanes, ensuring the delivery of certified clean building pads and site access roads. The project falls under NAICS code 562910 and is structured as a subcontract for prime contractors. Interested parties should note the response deadline of October 29, 2026. The work is centered on providing essential infrastructure readiness and environmental cleanup to meet federal standards for military installations in the Alaska District.

Remediation Services

POSTED

DEADLINE

in about 13 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

31--BUSHING,SLEEVE

Solicitation # SPE4A625T066G

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

31--BEARING,ROLLER,ROD END

Solicitation # SPE4A624T40LH

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

31--BUSHING, FLANGED

Solicitation # SPE4A625T197J

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

31--BEARING,BALL,ANNULA

Solicitation # SPE4A625T197S

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

31--BEARING,SLEEVE

Solicitation # SPE4A625T200E

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

31--HOUSING,BEARING UNIT

Solicitation # SPE4A625T200F

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Pillow Block Bearing

Solicitation # W911KF-25-Q-0008

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

31--BUSHING,SLEEVE

Solicitation # SPE4A625T189H

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

31--BEARING,BALL,ANNULAR

Solicitation # SPE4A625T189E

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Vehicle Recompete: Idc SPE4A621D5850

POSTED

almost 2 years ago

DEADLINE

31--BEARING,BALL,ANNULA

Solicitation # SPE4A625RX070

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

BEARING,BALL,ANNULAR

Solicitation # SPE4A625Q0346

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS