This Government Contract opportunity from Texas was posted on June 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Warranty and Long-Term Maintenance Support

Closed

State & Local

Submission Closed07/13/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

RFQ#3857 Replace Walk-In Cooler and Freezer Doors

Solicitation # RFQ#3857

Management & Training Corporation (MTC) is soliciting bids under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, and supervision to remove and dispose of existing doors and install one walk-in cooler door and two walk-in freezer doors. The project includes the installation of all necessary hardware, such as hinges, latches, gaskets, and thresholds, ensuring airtight sealing and proper alignment. Deliverables include the fully operational doors and a minimum one-year workmanship warranty along with manufacturer certificates. This is a lump sum fee contract open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit their proposals via email by September 28, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, a completed supplier packet with IRS W-9 and self-certification forms, proof of insurance, and three references for similar projects. Award selection is based on best value as determined by MTC. The contractor must comply with OSHA safety requirements, the Buy American Act, and Service Contract Labor Standards under Wage Determination 2015-4347. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.

Management & Training Corporation

POSTED

DEADLINE

27-048: On-Call Repair and Maintenance of Gym Equipment

Solicitation # BD-27-1167-PUR02-PUR01-133507

The solicitation numbered BD-27-1167-PUR02-PUR01-133507 is for on-call repair and maintenance services for gym equipment in Springfield, Massachusetts. This procurement is managed by the Massachusetts Procurement agency and is overseen by the primary point of contact, Neil Walker. The opportunity was posted on September 16, 2026, and the deadline for responses is October 2, 2026. All services will be performed within Springfield, Massachusetts, and further details can be accessed through the CommBuys portal.

POSTED

DEADLINE

Wastewater Pump Impeller and Volute Replacement - Central Ave Pump Station

Solicitation # BD-26-1652-PW240-PW240-133223

The Department of Public Works for Massachusetts is seeking bids for the Wastewater Pump Impeller and Volute Replacement project at the Central Ave Pump Station. This solicitation, identified as BD-26-1652-PW240-PW240-133223, involves specialized equipment replacement services to be performed in Ayer, Massachusetts. The solicitation was posted on September 16, 2026, with a response deadline of October 16, 2026, at 7:00 PM. Interested parties should direct inquiries to the primary point of contact, Purchaser Matt Hernon, regarding this SLED organization project.

PW240 - Department of Public Works

POSTED

DEADLINE

Wagner Paint Proportioner Maintenance & RepairThis subcontract opportunity with the Department of Defense, specifically AFSC OL H PZIM, involves the specialized servicing, maintenance, and repair of Wagner Paint Proportioner systems at Hill Air Force Base. The selected contractor will be responsible for performing critical tasks including calibration, seal replacement, pump maintenance, and system testing to ensure accurate paint-to-hardener ratios, ultimately delivering a fully operational system. Eligible bidders must demonstrate a documented history of providing similar services to government or commercial clients within the last three years. The project falls under NAICS code 811310, with a response deadline of September 28, 2026.

FA8227 Afsc Ol H Pzim

POSTED

DEADLINE

81--CYLINDER,COMPRESSED, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC29

This presolicitation contract, issued by the Department of Defense under Navsup Weapon Systems Support, is for the repair or modification of 40 compressed cylinders identified by NSN 7R-8120-016571545-P8. The requirement specifies the use of TDP Version 002 and stipulates that delivery will be handled FOB Origin. The solicitation, numbered N0038326QSC29, was posted on September 16, 2026, with a response deadline of November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.

Navsup Weapon Systems Support

POSTED

DEADLINE

Leavenworth, TX CMOP - Walk-in Cooler Repair

Solicitation # 36C77026Q0184

This solicitation, numbered 36C77026Q0184, is for the repair of a walk-in cooler at the Department of Veterans Affairs CMOP facility located in Lancaster, Texas. The project is designated as a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses and has an estimated magnitude of less than 25,000 dollars. A site visit is scheduled for September 17, 2026, at 12:00pm Central, requiring coordination with William Byrd and Robert Gochenour. Interested parties must submit their responses by the deadline of September 23, 2026.

National Cmop Office (36C770)

POSTED

DEADLINE

High Reach Genie Services

Solicitation # FA660626Q0033

Solicitation FA600626Q0033 is a small business set-aside for a firm-fixed-price contract to provide preventative maintenance and unscheduled mechanical repairs for a fleet of eight specialized aerial boom lifts, scissor lifts, and material handling tow tractors at Westover Air Reserve Base. The requirement includes annual and quarterly safety compliance checks and strict emergency response timelines, requiring technicians to arrive on-site within 24 hours of notification, provide estimates within 24 business hours of diagnosis, and complete repairs within 24 hours of approval. Technicians must hold ANSI/IPAF or equivalent commercial certifications for Genie, JLG, or Toyota equipment. The government will award the contract based on the Lowest Price Technically Acceptable (LPTA) method, evaluating offerors on a pass/fail basis regarding personnel qualifications and their responsive deployment plan. Proposals must be submitted electronically by September 16, 2026, and include personnel credentials, a deployment narrative, and pricing tables for the base and option years. The fleet currently consists of four active assets, with four additional assets to be phased in via administrative modification upon delivery.

POSTED

DEADLINE

RFQ - Uninterruptible Power Supply (UPS) Units Maintenance and Repair Support Services

Solicitation # PANAPG-26-Q-0UPS

POSTED

DEADLINE

J059--PNEUMATIC TUBE SYSTEM PM&R SERVICES HARRY S TRUMAN VA MEDICAL CENTER COLUMBIA, MISSOURI

Solicitation # 36C25527Q0007

The Department of Veterans Affairs, specifically Network Contracting Office 15, is conducting market research through a sources sought notice for pneumatic tube system preventive maintenance and repair services at the Harry S Truman VA Medical Center in Columbia, Missouri. This announcement is for research purposes only and is not a formal request for proposals or quotes. The government intends to set this requirement aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), though it remains open to other qualified sources across various size classifications under NAICS code 811310 and PSC J059. Interested contractors must submit their capabilities and the required contractor fillable form to the primary point of contact, Greg McMillan Sr., by 10:00 a.m. CST on October 16, 2026. The information gathered will be used to determine the feasibility of a competitive procurement and to make final acquisition decisions. Respondents will not be notified of the results of this market research, and the government assumes no commitment to pay for costs associated with the submission of information.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Barge #600 Hydraulic Lines Replacement for Missouri River Project Office (MRPO)

Solicitation # W9128F26QA097

Solicitation W9128F26QA097 is a firm-fixed-price request for proposals issued by the Department of Defense for the maintenance overhaul and replacement of the high-pressure hydraulic piping system on Equipment Barge #600. Located at the Missouri River Project Office in Omaha, Nebraska, the project requires the removal and replacement of both flexible lines inside the hull and rigid steel lines housed above deck. The scope of work includes draining and disposing of hydraulic fluid, furnishing new materials—specifically Schedule 160 seamless steel pipe and SAE 100R12 flexible lines—performing pressure testing at 3000 psi, and conducting necessary structural repairs such as cutting and patching access holes with ASTM A36 carbon structural steel. The period of performance is scheduled from November 15, 2026, through March 15, 2027. This is a total small business set-aside, and the government will award the contract to the offeror providing the best value, considering both price and past performance. Offerors must demonstrate experience by providing up to three projects of similar magnitude completed within the last five years. Due to the nature of the work, the contractor must adhere to strict safety protocols for permit-required confined spaces, complying with EM 385-1-1 and OSHA standards, and must maintain independent on-site rescue procedures. Key submittals required before work begins include a site-specific health and safety plan, a work plan, material certifications, and proof of insurance. Proposals must be submitted electronically to Grant Hibbs no later than September 18, 2026, at 2:00 PM local time. A site visit is scheduled for September 11, 2026, requiring RSVP and specific confined space documentation for barge access.

POSTED

DEADLINE

TURBOCHARGER EXHAUST LEFT

Solicitation # 70Z08026QDL062

The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for the open, inspection, report, and possible overhaul of four left-side turbochargers, part number EX59610100196 and NSN 2950 12 390 5601. These components are used on 154 foot WPC vessel MTU 4000 series diesel engines. The requirement is a total small business set-aside under NAICS 811310, with an estimated total value of 57,057 dollars. The objective is to restore the units to a service ready condition in strict accordance with Original Equipment Manufacturer specifications from Rolls Royce Solutions GMBH. Substitute parts are not acceptable, and the contractor must use only OEM parts and procedures to ensure vessel safety and mission reliability. The contract is a firm fixed price award based on the lowest price technically acceptable offer. The contractor must provide a separate inspection fee and a firm fixed repair price per unit. Deliveries are required by December 20, 2026, F.O.B. Destination to the SFLC receiving room in Baltimore, Maryland. Strict preservation, packaging, and marking standards apply, including the use of ASTM D-3951 or ASTM-D6880 heavy duty wooden crates and marking in accordance with MIL-STD-129R. The contractor must guarantee the items against defects for 90 days after installation or up to two years after delivery. All offerors must be registered in SAM.gov and provide necessary representations and certifications.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

CATEGORY 5 SAFETY TEST ON THE TRACTION ELEVATOR U.S. ARMY CORPS OF ENGINEERS SAM RAYBURN POWER PLANT, JASPER, TEXAS

Solicitation # W9126G26QA125

W076 Endist Ft Worth

POSTED

about 14 hours ago

DEADLINE

in 1 day

AI Contract Overview

The contract establishes a framework for post-installation preventive maintenance, repair services, spare parts supply, and technical support for equipment or systems installed under prior agreements, governed by warranty terms or extended service contracts. It ensures ongoing operational reliability through scheduled maintenance activities, timely response to failures, and access to genuine replacement components, all aligned with the performance expectations of the end user. The contract is issued as a subcontract under the Texas A&M University System, categorized under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on June 26, 2026, with a deadline for responses set for July 13, 2026, indicating the procurement is active and seeking qualified vendors to fulfill long-term service obligations. While specific geographic details for performance or contact information are not provided, the service scope implies a statewide or multi-site application across Texas A&M campuses or affiliated facilities, requiring consistent technical support and inventory management to maintain system uptime and compliance with institutional standards.

General Info

Post-installation maintenance, repair, spare parts, and technical support for Texas A&M equipment under NAICS 811310, solicited June 2026.

Agency

Texas A&M University System

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of TAMUS-ITB-26-0540.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CNC Equipment

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 26

subcontract

Response DeadlineJul 13

Deadline has passed

Submission Closed

07/13/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas A&M University System

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas A&M University System

Office AddressN/A

ContactsNo contact information available

Full Description

Post-installation preventive maintenance, repair services, spare parts supply, and technical support under warranty or service agreement.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS