Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

WASHER, FLAT

Active
SPE4AX-27-T-0004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4AX-27-T-0004 is a request for quotations issued by the DLA Weapons Support SMSG Aviation Supply Chain Corporate LTC for the procurement of 136 flat washers, identified as NSN 5310-00-141-1873 and RTX Corporation part number 118065. This item is designated as a critical application commercial item and must be manufactured in accordance with specific reference drawings and quality assurance provision QAP 77445 MQR-PSD-1. Delivery is required within 256 days after order, with the place of performance and delivery located at Tinker AFB, Oklahoma. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, including specific packaging standards under ASTM D3951 and MIL-STD-129. Due to the nature of the technical data, offerors must possess an approved US/Canada Joint Certification Program certification and comply with ITAR or EAR export controls. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and registration in the System for Award Management. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act and safeguarding of covered defense information. Quotations must be submitted via the DIBBS portal by November 9, 2026, and must not utilize additive manufacturing unless specifically authorized.

General Info

DLA solicitation for 136 critical flat washers delivered to Tinker AFB, Oklahoma.

Agency

Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC
Office AddressUSA
Contacts
Jennifer Snyder
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER, FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-00-141-1873 Quantity: 136 EA Purchase Request: 7018952766QTY: 136 Delivery: 256 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Supply of Tightening Bolt Assembly (NSN 4420-01-504-6304)
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Special High Strength Shear Bolts (NSN 5306-00-708-7672)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the manufacturing of special high-strength shear bolts identified by NSN 5306-00-708-7672. The contractor is responsible for fabricating these bolts using precision CNC machining and ensuring they meet strict quality standards. This includes performing stress durability testing according to NASM1312-5 through strain gage, external loading, or elongation methods, and applying all necessary markings in compliance with MIL-STD-130N and RQ017. The project is designated as a Total Small Business Set-Aside under NAICS code 332722. Final deliverables consist of the finished shear bolts accompanied by a Certificate of Quality Compliance. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Precision Machine Bolt Manufacturing (NSN 5306-00-678-4262)This subcontract opportunity is for the manufacture and supply of specialized machine bolts under NSN 5306-00-678-4262 to support prime contractors for the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider must utilize precision machining equipment to fabricate the bolts and adhere to strict quality assurance standards per MIL-STD-1916 or ASQ H1331. Additionally, all products must be packaged according to MIL-STD-2073-1E and MIL-STD-129, with the final delivery including both the finished hardware and a comprehensive quality data package. The contract is designated as a Total Small Business Set-Aside under NAICS code 332722. To be eligible, contractors must maintain JCP certification, CMMC Level 2, and full ITAR/EAR compliance. Interested parties must submit their responses by November 16, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Plain Round Nuts (NSN 5310-01-348-5776)This subcontract opportunity is for the manufacture and supply of precision plain round nuts under NSN 5310-01-348-5776 to support prime contractors for the Department of Defense DLA Weapons Support ASC. The selected provider must execute First Article Testing on three units and ensure all packaging and marking adhere to MIL-STD-129 and RP001 standards. This is a Total Small Business Set-Aside under NAICS code 332722. Strict compliance requirements are in place, including CMMC Level 2 certification, US/Canada Joint Certification, and adherence to ITAR and EAR regulations. Interested parties must submit their responses by November 16, 2026. The final deliverables consist of the finished precision nuts and all associated compliant packaging.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Supply of Self-Locking Castellated Hexagon Nuts
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Head Cap Screws (NSN 5305-01-161-5501)This subcontract, issued by the Department of Defense for the DLA Weapons Support ASC, involves the manufacture or sourcing of Hexagon Head Cap Screws meeting NSN 5305-01-161-5501 specifications. The contractor is responsible for providing these fasteners to prime contractors, ensuring all items are sampled according to MIL-STD-1916 or ASQ H1331 and packaged in 50-unit increments following MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722 and requires strict compliance with Buy American regulations. Interested parties must respond by November 16, 2026, to support the operational needs of the AE and AF divisions.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Close Tolerance Bolt ManufacturerThis subcontract opportunity is for the manufacture of high-precision, close tolerance bolts under NSN 5306-00-814-5532 to support prime contractors for the DLA Weapons Support ASC Commodities Division. The project requires the fabrication of bolts using precision CNC machining in strict accordance with AN173THRUAN186 Rev 7(1) and NASM6812 Rev 4 standards. Quality assurance must be maintained through sampling performed per MIL-STD-1916 or ASQ H1331 to ensure all finished products meet critical application specifications. The procurement is designated as a Total Small Business Set-Aside under NAICS code 332722. Interested parties must respond by November 16, 2026, following the posting date of November 2, 2026. This Department of Defense contract focuses on delivering specialized hardware that meets rigorous military and industrial tolerances.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Manufacture of Close Tolerance Screws (NAS1153V4)This subcontract involves the manufacture of 2,016 high-precision, close tolerance screws, specifically part number NAS1153V4, for the DLA Weapons Support ASC Commodities Division. The components must be produced to Thread Class 3A tolerances using traditional forming or subtractive methods, as additive manufacturing is strictly prohibited. All deliverables must be accompanied by Certificates of Conformance. The contractor is required to maintain quality systems compliant with SAE AS9003 or ISO 9001 and must adhere to zero-based sampling standards per MIL-STD-1916 or ASQ H1331. Performance for this Department of Defense project will take place at Robins Air Force Base.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Hardware Kit Supplier (Bolts and O-Rings)This subcontract opportunity is for a Hardware Kit Supplier to provide precision fasteners and sealing components for the DLA Weapons Support Land Supply Chain. The selected vendor will be responsible for sourcing or manufacturing 12,140 high-strength bolts and 607 industrial o-rings using precision machining or industrial rubber molding. All deliverables must strictly adhere to the Buy American Act and the Berry Amendment. The project is designated as a Total Small Business Set-Aside under NAICS code 332722 and will be performed in New Cumberland. Interested parties must submit their responses by November 13, 2026, to support the Department of Defense in maintaining critical weapons support infrastructure.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Supply of Shoulder Screws (NSN 5305-01-272-8323)
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Critical Application Flat Washers (NSN 5310-00-141-1873)This subcontract involves the precision manufacture of 136 critical application flat washers, specifically NSN 5310-00-141-1873 and RTX PN 118065, for the Department of Defense. The components must be produced according to QAP 77445 MQR-PSD-1 and DLA Master List requirements using precision machining or stamping, as additive manufacturing is strictly prohibited. Final delivery of the units is designated for Tinker AFB. Compliance requirements are stringent, necessitating JCJP certification and full adherence to ITAR and EAR regulations. Additionally, all products must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards. This effort supports prime contractors delivering essential aviation supplies to the DLA Weapons Support SMSG Aviation Supply Chain.
DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Machine Screws (NSN 5305-00-638-7329)This subcontract involves the manufacture or procurement of 13 units of machine screws, identified by NSN 5305-00-638-7329, to support prime contractors for the DLA Weapons Support SMG Aviation Supply Chain. All products must adhere to the DLA Master List of Technical and Quality Requirements, with specific mandates for sampling per MIL-STD-1916 or ASQ H1331, marking per RQ017, and packaging according to ASTM D3951, RP001, and MIL-STD-129. Final delivery of the packaged components is required at Tinker AFB. The contractor must maintain strict regulatory compliance, including ITAR and EAR standards, and must meet CMMC Level 2 cybersecurity requirements. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense. Interested parties must respond by November 9, 2026.
DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

NAICS: 336412
New
DIBBS
Manufacturing of Combustion Chamber Plates (NSN 2840-01-159-6767)This subcontract involves the manufacture and supply of 540 precision-engineered combustion chamber plates, identified as NSN 2840-01-159-6767, for prime contractors supporting the Department of Defense DLA Weapons Support SMSG Aviation Supply Chain. The work requires precision machining and forming to aerospace tolerances using CNC equipment, with performance taking place at Tinker AFB. The contractor must maintain strict adherence to quality standards, specifically SAE AS9003 or ISO 9001, and utilize MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the provider must ensure full compliance with the Buy American Act and meet CMMC Level 2 cybersecurity requirements.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized packaging and marking for prime contractors supporting DLA aviation supply contracts. The scope of work requires the packaging of items according to ASTM D3951 and marking in compliance with MIL-STD-129. Additionally, the provider must implement DLA Master List requirements RP001 and RQ017 to ensure proper physical identification and bare item marking. The specific deliverable for this contract consists of 29 units of tube assemblies, which must be packed and labeled for shipment to the DLA Distribution Depot Oklahoma. Performance will take place at Tinker AFB, and the project falls under NAICS code 561910 for the Department of Defense.
Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Precision Manufacturing of Metal Tube AssembliesThis subcontract involves the precision manufacturing of 29 metal tube assemblies for the Department of Defense, specifically supporting DLA aviation supply contracts. The fabrication must strictly follow TDP Rev A Gen 1 and RTX Corporation part numbers 458123 and 646787, while adhering to Reference QAP 77445 MQR-PSD-1. A zero non-conformance policy is in effect, and the use of additive manufacturing is strictly prohibited for these components. The contractor is required to maintain CMMC Level 2 and NIST SP 800-171 compliance to ensure data security. Performance will take place at Tinker AFB, with the final deliverable consisting of 29 completed and inspected aviation tube assemblies. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331210
New
DIBBS
Supply of Aviation-Grade Raw Material for Angle BracketsThis subcontract involves the supply of certified aviation-grade raw metal stock for the production of angle brackets under the DLA Weapons Support SMSG Aviation Supply Chain. The provider is responsible for sourcing alloys that strictly adhere to Government Design Control Activity specifications and ensuring all materials are delivered directly to the fabricator. To maintain regulatory compliance, the supplier must provide Material Test Reports and Certificates of Conformance in accordance with DFARS Buy American Act requirements. The project is managed by the Department of Defense with the place of performance located at Tinker AFB.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Fabrication of Angle Brackets (NSN 5340-00-810-7046)This subcontract involves the precision fabrication of 134 angle brackets under NSN 5340-00-810-7046 for the Department of Defense, specifically supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The manufacturer must adhere strictly to Government Design Control Activity specifications and ensure all units are marked, labeled, and packaged in accordance with MIL-STD-129 and ASTM D3951 standards. Performance of this contract requires the provider to hold JCP certification and maintain ITAR/EAR approval. The final deliverable consists of 134 finished and packaged brackets to be associated with operations at Tinker AFB. Interested parties must respond by November 9, 2026.
Machine Shops

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for critical aircraft engine components supporting DLA Weapons Support projects. The contractor is responsible for ensuring all items are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129, specifically adhering to preservation method 10 and cleaning and drying requirement 1. The use of MIL-SPEC packaging materials and specialized marking equipment is mandatory to meet these standards. The final deliverables consist of packaged and marked components prepared for FOB Origin shipment to Tinker AFB. This requirement is managed under NAICS code 561910 for the Department of Defense, specifically the DLA Weapons Support SMSG Aviation Supply Chain organization.
Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Aerospace Component Precision MachiningThis subcontract for Aerospace Component Precision Machining involves the final machining, drilling, and finishing of No. 4 bearing breather tube shields for DLA Weapons Support. The selected contractor must execute precision machining according to RTX Corporation part number 481080, ensuring physical identification and bare item marking comply with RQ017. Final inspections must be conducted in accordance with MIL-STD-1916 or ASQ H1331 to deliver fully finished and inspected heat shields. The project requires the use of CNC milling and turning centers and mandates that the provider holds SAE AS9003 or ISO 9001 certification along with a CMMC Level 2 Self-Assessment. Performance will take place at Tinker AFB. Interested parties must respond by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 332710.
Machine Shops

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331221
New
DIBBS
Aircraft Engine Heat Shield Casting/ForgingThis subcontract involves the casting or forging of metal heat shield blanks for the No. 4 bearing breather tube, supporting DLA Weapons Support projects. The contractor must produce these critical application items in accordance with RTX Corporation part number 481080 specifications. Due to the technical nature of the work, the provider is required to possess specialized tooling and high-temperature alloy casting or forging equipment. Compliance requirements include mandatory SAE AS9003 or ISO 9001 certification and a CMMC Level 2 Self-Assessment. The project is managed under the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain organization, with the place of performance located at Tinker AFB. Interested parties must adhere to the response deadline of November 9, 2026.
Rolled Steel Shape Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Aerospace-Grade Raw Material Supply (Berry Amendment Compliant)This subcontract involves the supply of aerospace-grade raw alloys or bar stock to prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The provider must deliver certified materials that strictly adhere to the chemical and physical properties outlined in TDP Rev A Gen 1. To ensure quality and regulatory adherence, the contract requires full material traceability, the provision of Mill Test Reports, and strict compliance with the Berry Amendment and the Buy American Act. The project is managed under the Department of Defense for the DLA Weapons Support SMSG Aviation Supply Chain Corporate LTC, with the place of performance located at Tinker AFB. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 336413. The primary objective is the reliable delivery of certified raw material stock directly to the manufacturer.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining/Manufacturing of Bearing Retaining Nuts (CSI)This subcontract involves the precision machining and manufacturing of three high-precision bearing retaining nuts, identified by NSN 5310-00-771-1489, for the Department of Defense under the DLA Weapons Support SMSG Aviation Supply Chain. The project requires strict adherence to Technical Data TDP Rev A Gen 1 and Air Force Critical Safety Item standards, with performance taking place at Tinker AFB. To qualify, the manufacturer must possess SAE AS9100 quality management certification and hold a Joint Certification Program certification to handle export-controlled data. The contract is categorized under NAICS code 332710 and requires specialized CNC machining capabilities to meet the rigorous safety and technical specifications of the aviation supply chain.
Machine Shops

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense, specifically the DLA Weapons Support aviation supply chain. The contractor is responsible for providing specialized packaging and marking for prime contractors, ensuring all components are processed according to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. Key tasks include applying lot and serial numbers and CAGE codes using industrial marking equipment and anti-corrosion materials to deliver shipment-ready goods. The project requires strict adherence to DFARS 252.223-7001 compliance and will be performed at Tinker AFB. This opportunity falls under NAICS code 488410, with a response deadline of November 9, 2026.
Motor Vehicle Towing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333515
New
DIBBS
Manufacturing of Spur Gears (Critical Safety Item)This subcontract involves the manufacture and delivery of 16 spur gears to support DLA Weapons Support aviation supply chain projects. The components must be produced to match RTX Corporation part number 820462, adhering strictly to TDP Rev A Gen 1, QAP 13873 QAP-E09 Rev A, and QAP 77445 MQR-PSD-1 Rev 2. Due to the technical nature of the project, the contractor is required to utilize precision gear cutting and grinding equipment. As these components are designated as Critical Safety Items, the provider must hold CSI certification and submit a CMMC Level 2 self-assessment. The work is associated with the Department of Defense and is designated for performance at Tinker AFB. Interested parties must respond by November 9, 2026.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-27-T-7925
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A7-27-R-X120
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-27-T-7926
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RECEPTACLE, TURNLOCK FA
Solicitation # SPE4A7-27-T-2583
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A7-27-R-X139
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ROUND
Solicitation # SPE4A6-27-T-7954
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
Awarded
DIBBS
53--WASHER,FLAT
Solicitation # SPE4A6-26-T-27XR
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
53--SCREW,CAP,SOCKET HEAD
Solicitation # SPE4A6-26-Q-0899
Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
Federal
53--SCREW,CAP,HEXAGON H
Solicitation # SPE4A626T375R
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
53--NUT,PLAIN,BARREL
Solicitation # SPE4A6-26-T-36FF
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
53--NUT SPACER,PLATE
Solicitation # SPE4A6-26-T-07SA
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
53--NUT,SELF-LOCKING,SPLINE
Solicitation # SPE4A6-27-T-4619
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS