WEBBING, TEXTILE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Solicitation SPE1C1-27-Q-0186 is a small business set-aside, fixed-price contract for the procurement of 100 yards of textile webbing (NSN 8305-00-242-6323) for use in military tentage, clothing, and equipage. The material must be woven nylon, plain weave, natural color, with a maximum weight of 1.50 ounces per linear yard and a minimum breaking strength of 4,500 pounds. The webbing must be abrasion resistant and resin treated in accordance with MIL-DTL-4088L and PIA-W-27265, with specific thickness and width tolerances. Delivery is required by March 2, 2026, at Robins AFB, Georgia, with a delivery window of 120 days after order. Quality assurance is managed through DLA Troop Support Clothing and Textiles requirements. For awards exceeding $100,000, full test reports and government laboratory testing are mandatory; otherwise, a Certificate of Conformance is acceptable. Packaging must follow ASTM D3951 and MIL-STD-129, with each roll measuring between 90 and 110 yards and featuring a specific paperboard identification ticket attached with 5-ply cotton string. The contract includes a one-year warranty for non-complex supplies and requires the use of the Wide Area WorkFlow system for invoicing and payment.
General Info
Place of Performance
375 PERRY ST BLDG 255, ROBINS AFB, GA, 31098-1672, USASet-Aside
Documents
1AI Contract Breakdown
Uniform Contract FormatSign up to view the full breakdown with detailed analysis of each section.
View Full BreakdownEverything you need to bid on this one
Open the full contract in your free workspace.
- 1 solicitation documentRead every page
- AI contract breakdown13 sections, Uniform Contract Format
- Buyer contactEmail and phone
Ask CLEATUS
I've read this contract. Ask me anything.
Timeline
Solicitation
Submission deadline
Response Deadline
Organization & Contact Information
Full Description
NSN/MATERIAL:8305002426323
ITEM DESCRIPTION
WEBBING,TEXTILE
WEBBING, TEXTILE
.
RA001:THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT INTHE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES INDIVIDUAL NSN DATA . NSN 8305-00-242-6323; PGC11039 . ITEM NAME: ,,WEBBING, TEXTILE PART NUMBER: ,,MIL-DTL-4088 CAGE CODE: ,,81349 . Shall be in accordance with (IAW) Detailed Specification MIL-DTL-4088L, WEBBING, TEXTILE, WOVEN NYLON dated 1 April2021. . The webbing is for use in the manufacturing of military tentage, clothing and equipage items used by the Department ofDefense. . Cloth Name: Plain Weave Design Type: Flat Weight: 1.50 ounces per linear yard maximum Breaking strength: 4,500pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 11039 Thickness: 0.080 inches minimum to0.125 inches maximum Width: 1.00 inch ± 0.06 (1/16) inches; 0.94 inches minimum to 1.06 inches maximum Type: XXV (25) Class: Not identified during provisioning of the NSN. Class reference. When procurement documents referencing this specification do notspecify the class of webbing<(>,<)> any class in paragraph 1.2 of MIL-DTL-4088L may be used. See below descriptions of each class: Class 1 Shuttle loom, nylon 6,6 Class 1A Shuttleless loom, nylon 6,6 Class 2 Shuttle or shuttleless loom, nylon 6 or nylon 6,6 Roll Length: 90 yards minimum to 110 yards maximum Special features: Environmental Protection: Abrasion resistant, class R(resin), treated in accordance with PIA-W-27265 Departure from cited designator:,,As modified by Special Features . The unit ofissue is a Yard (YD). . Each roll of the finished webbing shall be labeled or ticketed for
fiber content in accordance with theRules and Regulation Under the Textile Fiber Products Identification Act. . Identification tickets. Each roll or spool shall have a ticket attached with not finer than 5-ply cotton string doubled to not less than 6 inches long. The tickets shall be made ofpaperboard not less than 0.015 inch in thickness and the color shall be manila or light in intensity to permit easy reading ofprinted, stamped or typed markings. The use of handwritten entries is prohibited. The ticket shall have clipped corners at the end where a reinforcing patch (with or without a metal eyelet) is firmly affixed for attaching the tying string. The ticket shall be legibly printed with water insoluble ink with the following information: -Stock number -Nomenclature -Specification number -Yardage -Contract number and date of manufacture (month and year) -Contractor's name -Name of contracting
SPE1C1-27-Q-0186
SECTION B
SUPPLY/SERVICE: PGC: 11039 CONT'D
agency. . Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulations under the Textile FiberProducts Identification Act. . TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, Revision 1 dated 1 August 2021 (superseding DPSCM-4155.3 dated 3 November 1997) AREREQUIRED WITH ALL CONTRACT COMPONENT LOTS. In lieu of the abovenamed requirement, if the total contract award does NOT exceed$100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C<(>&<)>T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021. . SOURCES OF COMPONENTMATERIALS SHALL BE IDENTIFIED<(>,<)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THECONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT. RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)> EXAMINATION, AND TESTREQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OFTHE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . RT001: MEASURING AND TEST EQUIPMENT . 52.246-15 CERTIFICATE OF CONFORMANCE . GOVERNMENT LABORATORY TESTING OF COMPONENTS FORACCEPTANCE PURPOSE FOR PHYSICAL (NON-SHADE) TESTING: Only applicable if the total contract award exceeds $100,000 In lieu ofthe abovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C<(>&<)>T) Additional Quality Assurance Requirements(AQAR), Revision 1 dated August 2021. . THE VENDOR SHALL NOTIFY THE DLA Product Test Center -Analytical FOURTEEN (14)CALENDAR DAYS TO THIRTY (30) CALENDAR DAYS IN ADVANCE OF
WHEN LOTS ARE TO BE PRESENTED FOR SAMPLING AT THE ADDRESS BELOW. THECONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE SUPPLIER'S SOURCE SAMPLING REPRESENTATIVE WILL PROVIDE THE COMPLETED DD FORM 1222 dated March 2021 TO THELABORATORY TO BE SUBMITTED WITH THE COMPLETED TEST REPORT. TEST REPORTS SHALL NOT BE OLDER THAN NINETY (90) CALENDAR DAYS. LOTNOTIFICATIONS AND SOURCE SAMPLING DD1222s/TEST REPORTS SHALL BE FORWARDED TO: •••••@•••••.•••Sign up to see this detail SAMPLES FOR PHYSICAL TESTING WILLONLY BE FORWARDED UPON REQUEST TO: DLA Product Test Center -Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 EMAIL: •••••@•••••.•••Sign up to see this detail NOTE: PERMIT 45 CALENDAR DAYS . Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing. Any laboratory proposed by the contractor is subject to theapproval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. Theuse of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor does itrelieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid testresults. Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current
SPE1C1-27-Q-0186
SECTION B
SUPPLY/SERVICE: PGC: 11039 CONT'D
contact information. The prime contractor should alert the technical point of contact that the certificationprocess has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will beaccepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, theproduct specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process. In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC willcompare all required testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown tothe DLA-PTC, a lab certification survey (DLA Form 6005) will be provided for submission. If the DLA-PTC has a lab survey on filethat is less than 3 years old, that survey will be used for the initial NSN/Part Number: 8305-00-242-6323 Quantity: 100 YD Purchase Request: 7015693056QTY: 100 Delivery: 120 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency
Get AI-powered intelligence on this solicitation and the ones like it
Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.
Join 750+ contractors already using CLEATUS
