Top

Wireless Project

Active

094-26State & Local

Response Deadline08/18/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Nebraska → Lincoln Electric SystemView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

NE, US

Set-Aside

NONE

Documents

(6)

1. 094-26 Instructions to Bidders - Material.docx

DOCX

2. 094-26 LOC_Wireless_Project_Pricing_Schedule.xlsx

XLSX

3. 094-26 Bid Reply - Material Rev 2025.docx

DOCX

4. 094-26 EEO Form rev April 2025.pdf

PDF

Summary of LB1300 and Draft Contract Clause - Foreign Adversary Contracting Prohibition Act

PDF•other

Foreign Adversary Contracting Prohibition Act Certification Form

PDF•certification-form

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseSolicitation

PostedAug 3

Solicitation

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyNebraska → Lincoln Electric System

Contacts1 person available

OfficeNE, US

Organization / Agency

Nebraska → Lincoln Electric System

View Agency Profile

Office AddressNE, US

Contacts

All questions must be submitted through this bid portal under the "Clarifications" tabLES Procurement Department

contact@example.gov

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M0-26-T-027Z

The contract is for the procurement of one cartridge fuse identified by NSN 5920-00-296-1527 and part number MB01-8 from Cooper Bussmann, LLC, classified as a commercial off-the-shelf item. Delivery is required within five days under FOB origin terms with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 labeling standards with palletization following RP001 guidelines. Hazardous material packaging must meet IP025 if applicable per Fed-Std-313, and the use of ozone-depleting chemicals is strictly prohibited. The shipment must be sent via the fastest traceable means, excluding parcel post, to the specified delivery point in Raleigh, North Carolina. The contract reference is SPE7M0-26-T-027Z, with an original required delivery date of July 7, 2026, and the primary point of contact is Audrey Acuna. Unit of issue is each, and all documentation must align with DoD authorized units as defined in the official DLA reference.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-365Z

This contract, issued under solicitation number SPE7M5-26-T-365Z, pertains to the procurement of two diamond antennas with NSN 5985-01-717-2043, supplied by AFP Industries Inc and Diamond Antenna & Microwave Corporation under part number D220R. The delivery is required within 20 days of contract award, with FOB origin terms and no variance allowed in quantity—exactly two units must be delivered. Inspection and acceptance both occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E, including specific preservation, wrapping, and containment standards, and marking required to meet MIL-STD-129 without any special identification codes. Packaging and palletization must adhere to DLA’s standard procurement requirements, and shipment must be traceable—parcel post is strictly prohibited. The delivery address is the Distribution Management Office at Camp Lejeune, North Carolina, with specific reference codes and freight identifiers provided for logistics tracking. The original required delivery date is December 12, 2025, and technical and quality standards are governed by the DLA Master List referenced in the contract. The contract is classified under NAICS code 334220, managed by the Department of Defense’s Active Devices Division, with Matthew Stanko as the primary point of contact.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-26-Q-1320

The contract solicitation is for an AMPLIFIER, RADIO FRE with NSN/Part Number 5996-01-337-1120, requesting a quantity of two units under Purchase Request 7015536734. The solicitation, identified by number SPE7M1-26-Q-1320, was posted on August 3, 2026, with a response deadline of August 18, 2026. It is issued by the Defense Logistics Agency under the Department of Defense and classified as a federal solicitation without a specified set-aside type or NAICS code. The place of performance and office address information are not provided, and the point of contact details are empty. Interested parties must submit responses via the DIBBS portal using the provided UI link before the deadline.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-608J

This contract governs the procurement of 166 television sets identified by NSN 5820-01-652-3863 and part number PN-E759 from SHARP ELECTRONICS CORP, classified as a commercial off-the-shelf item. The television sets must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, material codes, and labeling per MIL-STD-129, with a fragile marking designation. The items are to be delivered FOB origin within 134 days of the contract award, with no tolerance for quantity variance, and inspected and accepted at the destination facility in New Cumberland, Pennsylvania. Sampling for quality assurance follows MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as specified; unspecified attributes default to major. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Delivery is mandated by October 17, 2025, with the original required delivery date set for February 24, 2026, and transportation logistics are governed by DLA procedural notes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-347L

The contract pertains to the procurement of five antenna support bases, identified by NSN 5985-01-621-3702, under solicitation SPE7M5-26-T-347L, issued by the Department of Defense’s Active Devices Division through the Defense Logistics Agency. Delivery is required within 168 days of government direction, with an original required delivery date of January 23, 2027, and a need ship date of January 19, 2027. All items must be delivered FOB destination to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with inspection and acceptance occurring at the destination. The quantity is fixed at five units with no variance allowed. Packaging must adhere strictly to DLA Master List of Technical and Quality Requirements, which supersede commercial standards. Non-hazardous items must be packaged per ASTM D3951, while hazardous materials, as defined by FED-STD-313, must comply with TQ requirement IP025. All packaging, including palletization, must conform to RP001 and be marked and labeled in accordance with MIL-STD-129, including standardized barcoding. Hazardous materials require compliance with the Hazard Communication Standard (29 CFR 1910.1200), and any item containing radioactive material above 0.002 microcuries per gram or 0.01 microcuries per item must be disclosed in writing prior to delivery. The unit of issue is each, with a proposed price of $5.00 per unit, though the total contract value is not finalized. Payment will be processed through WAWF, and compliance with a suite of FAR and DFARS clauses is mandatory, including those covering trafficking in persons, employment eligibility, sustainable products, security of government work product, whistleblower rights, former official compensation restrictions, and NIST SP 800-171 cybersecurity controls. The offeror must possess a valid Unique Entity Identifier and CAGE code and must disclose any provision of covered defense telecommunications equipment or services. The contract includes deviation-based clause alternatives and applies to a simplified acquisition, with the DLA Master List revision as of the solicitation issue date controlling. No option quantities or indefinite-delivery terms are specified.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-608N

This contract is for the procurement of a Supplementary Kit for Radio and Television Communication Equipment under NSN 5820-01-627-8968, with a quantity of 2,000 units to be delivered within 20 days of award. The solicitation, identified as SPE4A7-26-T-608N, was posted on August 3, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract mandates strict compliance with DLA packaging standards, Cybersecurity Maturity Model Certification Level 2 through a certified third-party assessment organization, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The supplier must furnish a Certificate of Quality Compliance for each manufacturing lot, adhering to the Supplemental Quality Assurance Provision, and provide one physical copy with each delivery while uploading an electronic version to the iRAPT system via the Receiving Report attachment tab. For government-inspected shipments, the certificate must be available for review at the point of acceptance and may be used by government representatives to approve the WAWF receiving report if all documentation is properly submitted. Configuration changes require formal deviation requests through Edgewood’s Chemical, Biological Center process, and all items must be marked per physical identification standards, though Item Unique Identification is not required per customer directive under DFARS 252.211-7003(c)(1)(i). Non-accepted supplies must have all government identification removed, and all data and documentation costs are included in the unit price. The place of performance is Fort Carson, Colorado, with Renee Bynum as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BASE, ANTENNA SUPPORT

Solicitation # SPE7M5-26-T-366P

The contract specifies the procurement of 16 units of a BASE, ANTENNA SUPPORT with NSN 5985-01-493-6875 and part number 7030583-1 under solicitation SPE7M5-26-T-366P, with a unit price of $16.00 and a total price of $256.00. Delivery is required FOB origin within 157 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item is classified as a commercial item per FAR Part 2.101, and all packaging must comply with DLA Master List of Technical and Quality Requirements, which override ASTM D3951; non-hazardous items must be commercially packaged per ASTM D3951 while hazardous items must meet Fed-Std-313 and TQ requirement IP025. All packaging and labeling must follow MIL-STD-129 and palletization must adhere to RP001. The specified delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is January 19, 2027, with an original required date of January 4, 2027. Cybersecurity Compliance requires a CMMC Level 2 Self-Assessment, and all technical and quality obligations referenced by R or I numbers are governed by the DLA Master List in effect on the applicable date. The Unit of Issue is each (EA), and transportation details must follow DLAD Proc Note C19 and C20.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-340P

The contract is for the procurement of 620 units of an adapter and connector item identified by NSN 5935-00-739-2242, with a delivery requirement of 168 calendar days from the award date, and a need ship date of January 19, 2027, with an original required delivery date of January 22, 2027. The item must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the specification includes multiple vendor part numbers such as UG-349A/U, R191419, RT510-073.00, Q 5 3142 7065, J01008A0824, and 33BNC-N-50-1, indicating interchangeability among approved suppliers. The use of Class I ozone-depleting substances in any manufacturing or processing step is strictly prohibited unless prior written approval from the contracting officer is obtained, though this restriction does not apply to commercial items as defined in FAR 11.001 or to part-number-only items. Packaging must comply with MIL-STD-2073-1E using a unit pack code U, with preservation method 41 (clean and dry), no cushioning, and individual wrapping. Marking must adhere to MIL-STD-129 with no special marking code, and bare item marking per RQ017 is required. All items must be palletized according to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with inspection and acceptance occurring at the destination, and the delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Invoicing is mandatory through Wide Area WorkFlow (WAWF), and the contracting officer has not specified a unit or total price in the CLIN. The solicitation number is SPE7M5-26-T-340P, issued on August 3, 2026, with proposals due by August 6, 2026, and must be submitted electronically via the DLA Internet Bid Board System. The contract incorporates numerous FAR and DFARS clauses including those related to equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, authorization and consent, unenforceability

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-366D

The contract specifies the procurement of a SWITCH, WAVEGUIDE with NSN 5985-01-091-7804 and part number 153-188-0001, under solicitation SPE7M5-26-T-366D, requiring one unit to be delivered FOB origin within 111 days with no variance allowed in quantity. The item is designated as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and if the item is hazardous per FED-STD-313, it must be packaged in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, although DLA requirements take precedence. Palletization must follow RP001 DLA Packaging Requirements. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 3, 2026, and an original delivery deadline of April 2, 2026. Inspection and acceptance occur at the destination. The contractor must perform a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and adhere to DLA’s handling of covered defense information. The unit of issue is each (EA), and the purchase request number is 7013271884. Point of contact is Lea Dawn Robertson, and the contract falls under NAICS code 334220, issued by the Department of Defense’s Active Devices Division.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-365X

The contract is for the procurement of four antennas identified by NSN 5985-01-412-9036 under solicitation SPE7M5-26-T-365X, with a deadline for responses on August 14, 2026, and a required delivery within 71 days after award. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which must be accessed online and applied according to revision dates tied to the solicitation or award timeline. The contractor must submit a complete data package covering both the approved part and any alternate part, and must comply with protocols for removing government identification from non-accepted supplies. The solicitation is issued by the Department of Defense’s Active Devices Division, with performance located in New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Matthew Stanko, reachable via email and phone. The NAICS code 334220 indicates this falls under communications equipment manufacturing, and all submissions must adhere to the structured procurement framework outlined by the Defense Logistics Agency.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Software-Defined Radio (SDR) and Modem IntegrationThe contract seeks software-defined radio solutions designed to advance digitization and waveform processing for satellite communications, ensuring full compatibility with the U.S. Air Force Battle Network requirements. The focus is on integrating modern SDR and modem technologies that enable secure, agile, and interoperable SATCOM capabilities in contested environments, with an emphasis on hardware and software that can dynamically adapt to evolving military communication protocols and spectral challenges. The solution must support rapid reconfiguration, encrypted data transit, and seamless integration with existing and future battlefield command and control architectures. The opportunity is structured as a subcontract under the Department of Defense, managed by FA8691 Aflcmc Wink Sensors, with performance expected to center in Colorado Springs. The solicitation was posted on August 3, 2026, and responses are due by August 18, 2026, under NAICS code 334220, which pertains to communications equipment manufacturing. While no set-aside designation or point of contact is specified, the technical scope demands proven expertise in military-grade SDR development, waveform engineering, and adherence to DoD network standards, requiring bidders to demonstrate technical maturity, system validation capabilities, and experience in supporting high-intensity operational scenarios.

FA8691 Aflcmc Wink Sensors

POSTED

DEADLINE

Supply of A-MLS Capable Single Ear Dynamic HeadsetsThe contract calls for the supply of two single-ear dynamic aviation headsets featuring an XLR 4-pin connector, a dynamic microphone, a boom switch, and A-MLS capability, with performance requirements matching or exceeding those of the Clear-Com CC-300-X4 model. These headsets are intended for use in aviation environments where reliable audio communication and noise reduction are critical, and the inclusion of A-MLS ensures compatibility with advanced military communication systems. All components must meet strict technical and durability standards to support operational readiness in high-stress conditions. This is a small business set-aside subcontract under NAICS code 334220, issued by the Department of Defense under the FA4861 99 Cons Lgc agency, with performance required at Indian Springs, Nevada, 89018. The solicitation was posted on August 3, 2026, and responses must be submitted by August 17, 2026, at 5:00 p.m. The contract is structured to prioritize procurement from small businesses, aligning with SBA guidelines, and the absence of a designated point of contact suggests submissions should follow standard federal procurement protocols for this type of solicitation.

POSTED

DEADLINE

More opportunities from Nebraska → Lincoln Electric System

Same awarding agency

NAICS: 334310

New

SLED

AV Equipment - LOC Boardroom

Solicitation # 098-26

Lincoln Electric System is soliciting bids for the furnishing and delivery of AV equipment for the LOC Boardroom under Bid Number 098-26, with a formal two-step unsealing process and a due date of August 18, 2026 at 2:00 PM CST. Bids must be submitted through the official portal, with all questions directed to procurementdept@les.com via the Clarifications tab, and clarification deadlines are set for August 11, 2026. The equipment is to be delivered FOB Lincoln, Nebraska, to the LES Operations Center at 9445 Rokeby Road, with payments processed by Accounts Payable at the same address. Successful bidders are required to comply with the LES Equal Employment Opportunity Compliance Form and complete the LB1300 Certification. LES reserves the right to award the contract to one or multiple vendors based on competitive advantage and organizational needs. The bid is open for 14 days, with an available date of August 3, 2026, and is classified as a formal solicitation under the SLED government sector.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Design and Engineering Support (Pre- and Post-Award)Lincoln Electric System is seeking a subcontractor to provide comprehensive structural engineering support for power transmission projects, focusing on the development of PLS-POLE models, detailed structural calculations, and fabrication drawings. The work encompasses both pre- and post-award phases, requiring the contractor to deliver accurate and code-compliant engineering documentation that supports the design, analysis, and manufacturing of transmission structures. The contract is classified under NAICS code 541330, indicating it falls within engineering services, and is open for responses until August 18, 2026, with proposals due by 7:00 PM CST. The place of performance and full agency address are unspecified, but the work is intended to support operations under the Nebraska jurisdiction. There is no set-aside type designated, and the opportunity is posted as a subcontract, suggesting it may be part of a larger project managed by Lincoln Electric System or contracted through another prime entity.

POSTED

DEADLINE

Transportation and Logistics (FOB Delivery to Lincoln, NE)The contract involves the heavy-haul transportation and delivery of fabricated steel structures to the LES laydown yard in Lincoln, Nebraska, with a requirement for advance coordination to ensure seamless unloading and placement. This is a subcontract under NAICS code 484220, categorized as FOB delivery, meaning the contractor is responsible for transporting the goods to the specified destination but not for unloading or final placement beyond delivery point. The solicitation was posted on July 30, 2026, with a response deadline of August 18, 2026, at 7:00 PM, giving potential bidders approximately three weeks to prepare and submit proposals. The contract is managed by Lincoln Electric System in Nebraska, with no specific set-aside type indicated, making it open to all eligible subcontractors. Coordination timelines, loading procedures, and compliance with heavy-haul regulations are critical factors for successful bid submission and履约.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Corrosion Protection and Coating ApplicationThis contract requires the hot-dip galvanizing of steel structures in accordance with ASTM A123 standards, ensuring durable corrosion protection through zinc coating applied via the hot-dip process. Any alternative coating methods or materials must receive prior written approval before implementation, and non-compliance with the specified standard will be considered a breach of contract. The work is scoped as a subcontract under NAICS code 332813, targeting industrial coating services for structural steel assets. The solicitation was posted on July 30, 2026, with a firm response deadline of August 18, 2026, at 7:00 PM, and the contracting entity is Lincoln Electric System based in Nebraska. Performance location details are unspecified, but the work is expected to occur at sites under the agency’s operational jurisdiction. All proposals must adhere strictly to the coating specification and submission timeline to be considered.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Anchor Bolt Cage Fabrication and DeliveryThe contract requires the fabrication and delivery of anchor bolt cages designed to securely attach steel poles to concrete foundations, with strict adherence to ACI 318 standards and the specific engineering drawings provided by LES. All components must meet precise dimensional, material, and weld quality requirements to ensure structural integrity and long-term performance under environmental and mechanical loads. The work scope encompasses full manufacturing, inspection, packaging, and timely delivery to the designated project site, with no flexibility allowed for deviations from the approved technical specifications. The solicitation is issued as a subcontract by Lincoln Electric System in Nebraska, targeting qualified manufacturers with proven capability in structural steel fabrication. Responses are due by August 18, 2026, and the North American Industry Classification System code 332311 indicates the focus is on metal structural fabrication. Performance is expected to align with the agency’s infrastructure reliability standards, and compliance with all applicable codes and drawings is mandatory. While the exact delivery location and point of contact are not specified in the provided data, all awarded work must fulfill contractual obligations without reliance on supplemental documentation or informal clarifications.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Steel Pole and Structural Framing FabricationThe contract titled Steel Pole and Structural Framing Fabrication requires the design, detailing, and manufacturing of steel poles, arms, braces, and all associated hardware in full compliance with Lincoln Electric System’s structural standards and ASTM specifications. The work must adhere to precise engineering guidelines to ensure structural integrity, durability, and safety for utility infrastructure applications, with all components fully engineered to meet industry-recognized technical benchmarks. This is a subcontract opportunity with no set-aside designation, and responses must be submitted by August 18, 2026, with the solicitation posted on July 30, 2026. The North American Industry Classification System code 332312 indicates the scope falls under fabricated metal product manufacturing, specifically focusing on structural metal framing and related components. All work is expected to be performed in accordance with the requirements defined by the Lincoln Electric System based in Nebraska, though the specific place of performance is not detailed in the provided information.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Fabrication & Delivery of Steel Transmission Structures (T-26-05)

Solicitation # 097-26

Lincoln Electric System is seeking bids for the fabrication and delivery of steel transmission structures under solicitation number 097-26, with all work to be performed and delivered FOB to their facility at 10101 N 84th Street, Lincoln, Nebraska. The bid opening follows a two-step unsealing process and is formally open for submission, closing in approximately 18 days. Interested parties must submit proposals by the due date of August 18, 2026, at 2:00 PM CST, after reviewing the detailed specifications included in the bid documents available since July 30, 2026. Clarifications must be submitted via the official bid portal’s Clarifications tab by August 11, 2026, at 4:00 PM CST, with all communication directed exclusively through the LES Procurement Department at procurementdept@les.com. The winning bidder will be required to comply with federal Equal Employment Opportunity regulations by submitting a completed Compliance Request Form. All deliveries must reach the specified ship-to location, and payments will be processed by the Accounts Payable department at 9445 Rokeby Road, Lincoln, NE.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Training Delivery for Avian Protection PlanThe contract mandates the development and delivery of initial and ongoing training programs for contractors and field personnel focused on avian protection protocols, seasonal nesting restrictions, and incident response procedures. Training must be comprehensive, tailored to operational needs, and aligned with regulatory and environmental best practices to ensure compliance and minimize harm to protected bird species. The program requires periodic updates to reflect changes in regulations, seasonal timelines, and emerging best practices, ensuring all personnel remain current and competent in their responsibilities. This subcontract is issued by Lincoln Electric System in Nebraska under NAICS code 611430, indicating a focus on professional and technical training. The solicitation was posted on July 30, 2026, with a response deadline of August 18, 2026. While specific location details for performance are not provided, services are expected to support field operations within the agency’s service area. The contract emphasizes practical, hands-on training delivery and effective communication of avian protection requirements to ensure safety, compliance, and environmental stewardship across all contracted activities.

Professional and Management Development Training

POSTED

DEADLINE

Environmental Compliance Reporting and RecordkeepingThe contract requires comprehensive environmental compliance reporting and recordkeeping related to avian interactions, including documentation of incidental takes and all mitigation actions undertaken. All records must be meticulously maintained and submitted through required forms and the USFWS online systems to both Lincoln Electric System and applicable regulatory agencies. The work demands strict adherence to reporting protocols and timelines to ensure regulatory alignment and environmental accountability. This subcontract is issued under NAICS code 541690 and is open for bid with a response deadline of August 18, 2026. The contract is managed by Lincoln Electric System in Nebraska, with no specific physical location outlined for performance. The nature of the work implies ongoing environmental monitoring and administrative rigor, requiring expertise in wildlife compliance, regulatory reporting systems, and accurate data management. No set-aside designation is specified, and the solicitation was posted on July 30, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Installation of Avian Deterrents and Mitigation DevicesThe contract involves the installation of physical deterrents on power structures to minimize risks of bird electrocution and unauthorized nesting. Key measures include deploying netting, marker balls, perch discouragers, and insulated covers across utility infrastructure to enhance avian safety while maintaining operational integrity. The work is classified as a subcontract under NAICS code 238210, indicating it falls within the electrical and other construction services category, and is issued by Lincoln Electric System in Nebraska. Bids must be submitted by August 18, 2026, with the solicitation posted on July 30, 2026, providing a window of approximately three weeks for interested parties to prepare and respond. The place of performance and specific locations for installation are not detailed in the provided data, and no set-aside provisions or point of contact information are specified.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Avian Nest Monitoring and ManagementThe contract requires execution of pre-work surveys to detect active bird nests, with specific attention to bald and golden eagle nesting sites, and mandates timely reporting of findings to the U.S. Fish and Wildlife Service and the Nebraska Game and Parks Commission. Coordination with these agencies is essential to determine appropriate actions such as nest relocation or temporary deferral of work activities to ensure compliance with federal and state wildlife protection regulations. The work is scoped to prevent disturbance to protected avian species during critical breeding periods and demands adherence to strict environmental protocols. This subcontract, categorized under NAICS code 541620, is issued by Lincoln Electric System in Nebraska and must be responded to by August 18, 2026. The scope involves field-based ecological monitoring and proactive management to mitigate impacts on eagles and other protected birds, requiring specialized expertise in avian biology and regulatory compliance. Work must be conducted in alignment with federal guidelines to avoid violations under the Bald and Golden Eagle Protection Act and related statutes, emphasizing environmental stewardship and regulatory adherence throughout project implementation.

Environmental Consulting Services

POSTED

DEADLINE

Transmission Right-of-Way (ROW) Vegetation ManagementThe contract pertains to the management of vegetation within transmission line rights-of-way to ensure electrical safety and compliance with wildlife protection standards, specifically targeting the prevention of bird electrocution and nesting activities. Vegetation clearance and maintenance must be carried out with strict attention to seasonal constraints, prohibiting any work between April 1 and August 15 to protect nesting birds during their breeding season. Outside of this window, vegetation must be regularly trimmed and managed to maintain grass height strictly between three and eight inches to reduce fire risk, ensure line accessibility, and inhibit tree or shrub encroachment that could compromise transmission integrity. The work falls under the NAICS code 561730 for landscaping services and is structured as a subcontract under Lincoln Electric System in Nebraska. The solicitation was posted on July 30, 2026, with responses due by August 18, 2026. While specific location details and point of contact information are unavailable, performance is expected across the utility’s transmission corridor network within the state. Contractors must demonstrate an understanding of avian protection regulations, precise mowing and clearing protocols, and the ability to operate within rigid seasonal windows while maintaining consistent vegetation height standards to meet operational and ecological requirements.

POSTED

DEADLINE