This Government Contract opportunity from Department Of The Interior was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Xerox VersaLink Copier Maintenance and Repair

Closed

Federal

Submission Closed09/08/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

Dimensional Tool Calibration (Gauges, Calipers, UCAD)This subcontract involves providing high-precision dimensional calibration services for measurement tools used by prime contractors on Mississippi Department of Public Safety projects. The scope of work includes the calibration of seven gauge blocks, three calipers, and four to five UCAD units utilizing specialized equipment such as laser interferometers, optical flats, or high-precision surface plates. To qualify for this engagement, the service provider must hold ISO/IEC 17025 accreditation specifically covering dimensional metrology. The primary deliverable for these services is the provision of formal calibration certificates. The solicitation was posted on October 9, 2026, with a response deadline of November 10, 2026, under NAICS code 811210.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Centrifuge, Autoclave, and Pressure/Flow CalibrationThis subcontract involves the calibration and certification of mechanical laboratory equipment and pressure and temperature tools for prime contractors supporting the Mississippi Department of Public Safety. The scope of work includes the calibration of 36 centrifuges, 6 autoclaves, pressure gauges, flow meters, and thermometer eutectics utilizing tachometers and pressure calibrators. The selected provider must deliver detailed calibration certificates and performance reports upon completion. A critical requirement for this engagement is that the contractor must hold ISO/IEC 17025 accreditation for the specific equipment types being serviced. The project falls under NAICS code 811210, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Balance, Pipette, and Volumetric Glassware CalibrationThis subcontract for the Mississippi Department of Public Safety involves the precision calibration of weighing and liquid handling equipment for prime contractors. The scope of work includes the calibration of 70 balances, 11 scales, 162 pipettes, and 32 graduated cylinders. All services must be performed using NIST-traceable weights and gravimetric testing equipment, with the final delivery requiring individual calibration certificates for every instrument. To be eligible, the provider must hold ISO/IEC 17025 accreditation specifically covering mass and volume calibration. The project falls under NAICS code 811210, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Bid Solicitation for Annual Calibration of instruments and equipment for all branches of MS Forensic Laboratory

Solicitation # 3160008306

The Mississippi Department of Public Safety is soliciting bids for a contract to provide annual equipment certification and calibration services for all branches of the Mississippi Forensic Laboratory. The scope of work includes both general and onsite field calibration for a wide array of laboratory equipment, including chemical fume hoods, balances, centrifuges, pipettes, biosafety cabinets, and various measurement tools. Services will be performed across multiple laboratory locations, including Pearl, Batesville, Meridian, Gulf Coast, and Oxford. The initial contract term is 48 months, with a possible one-year renewal option subject to approval. To be considered responsive, bidders must have at least one year of experience in the field, maintain a pool of qualified workers, and hold current ISO/IEC 17025 accreditation that specifically covers the required services and field calibrations. Evaluation is based on a pass/fail assessment of qualifications and a reference scoring system requiring a minimum total score of 21 across three references. The contract will be awarded to the lowest responsible and responsive bidder. Required submission documents include a bid cover sheet, the bid itself, references, and certifications and assurances. Bidders must also maintain professional liability insurance of at least 1,000,000 dollars per occurrence and name the Department of Public Safety as an additional insured.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Control Motor Teardown, Evaluation, and Repair ServicesThis subcontract involves the teardown, evaluation, repair, and modification of Control Motors under NSN 016742634 for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling the motors to identify wear, executing repairs according to technical orders and drawings, and conducting final inspections and testing based on OEM specifications to deliver one fully repaired and tested unit. The project is categorized under NAICS code 811210 and is managed by the Department of Defense. To be eligible, the contractor must possess the specific tooling required for NSN 016742634 and maintain CMMC compliance. The response deadline for this opportunity is November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

PWR ELECTRONIC MOD Repair and Modification ServicesThis subcontract involves providing repair and modification services for Power Electronic Modules supporting Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work includes the teardown, evaluation, repair, and modification of 51 units under NIIN 016487160. All work must be performed according to original manufacturer specifications, technical orders, and drawings, with physical identification and marking adhering to MIL-STD-130, REV N. The contractor is required to possess specialized tooling for electronic module overhaul and must be capable of supporting Government Source Inspection. This project falls under NAICS code 811210 and requires the delivery of 51 fully repaired and tested units.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Calibration ServicesThe Precision Calibration Services subcontract involves the calibration of electronic test and measurement equipment for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work specifically focuses on equipment used for PXI Chassis RFI certification, requiring all calibrations to be performed using standards traceable to national benchmarks. To ensure technical accuracy and quality, the contractor must maintain strict compliance with ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The primary deliverables for this engagement include the return of calibrated test equipment accompanied by official calibration certificates. This opportunity falls under NAICS code 811210 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Specialized Repair and Modification of Fuel Injector TestersThis subcontract with the Department of Defense for Navsup Weapon Systems Support involves the specialized repair and modification of seven fuel injector testers. The scope of work includes the teardown, evaluation, diagnosis, and repair of units to ensure they are returned to operational status in accordance with NSN 4910-01-667-7734 SX and Reference Number 98869 H9300T-53. To ensure certification and compliance, the contractor must utilize specific testing equipment and adhere to FED STD 313 and OSHA 29 CFR 1910.1200 standards. The project is categorized under NAICS code 811210, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Specialized Repair and Modification of PUMP UNIT, L/O KEEPThis subcontract involves the specialized repair and modification of a L/O KEEP pump unit, identified by NSN 4320-01-614-8491, for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes the complete teardown and evaluation of the unit to identify defects, followed by repairs executed according to original manufacturer drawings and specifications. To ensure operational readiness, the contractor must perform performance validation testing and coordinate closely with Government Source Inspection. The project is managed under the Department of Defense with a NAICS code of 811210. The final deliverable is one fully repaired and tested pump unit. Interested parties should note the response deadline of October 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Rotary Pump Teardown, Evaluation, and Repair ServicesThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the teardown, technical evaluation, repair, and modification of Rotary Pumps under NIIN 013190084. The scope of work requires the disassembly of pumps to identify worn components, performing repairs according to OEM specifications and drawings, and completing all necessary testing to ensure the assets are fully functional. All deliverables must adhere to CAGE Code 59180 and MIL-STD-130 identification standards. The project falls under NAICS code 811210, with a response deadline set for October 23, 2026. The final objective is the delivery of fully repaired and tested rotary pumps to the prime contractors.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Test Equipment Calibration ServicesThis subcontract for Test Equipment Calibration Services supports Navsup Weapon Systems Support IEP Module projects for the Department of Defense. The selected provider will be responsible for the calibration of electronic test sets and measurement tools used by prime contractors to validate modules. All work must be performed in strict adherence to ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The primary deliverables for this engagement include the delivery of calibrated test equipment along with the necessary certification reports. This opportunity falls under NAICS code 811210, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Heat Exchanger Teardown, Evaluation, and Repair ServicesThis subcontract involves the teardown, evaluation, and repair of Navy heat exchangers, specifically NSN 4420-12-396-4379, for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling units to identify wear, executing repairs according to technical orders and drawings, and conducting testing based on original manufacturer specifications. The contractor must ensure strict compliance with MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging while supporting Government Source Inspection. This project falls under NAICS code 811210 and is managed under the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in 7 days

AI Contract Overview

This subcontract, titled Xerox VersaLink Copier Maintenance and Repair, involves providing quarterly preventative maintenance, routine inspections, and as-needed repairs for three government-owned Xerox VersaLink copier/printer devices. The work is performed for prime contractors on Bureau of Reclamation projects located at Glen Canyon Dam under the Department of the Interior's Upper Colorado Regional Office. The contractor is responsible for using compatible service tools and parts to ensure operational equipment and must provide completed maintenance reports. The project is designated as a Total Small Business Set Aside under NAICS code 811210. All activities must strictly adhere to OSHA 29 CFR standards and RSHS manual requirements to ensure safety and compliance. The solicitation was posted on September 2, 2026, with a response deadline of September 8, 2026.

General Info

Quarterly maintenance and repair of three Xerox VersaLink copiers at Glen Canyon Dam.

Agency

Department Of The Interior → Upper Colorado Regional Office

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Set-Aside

SBA

Documents

This scope was carved out of 140R4026Q0121.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

J--GC26 - MAINTENANCE OF THREE COPIERS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Interior → Upper Colorado Regional Office

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Interior → Upper Colorado Regional Office

Office AddressN/A

ContactsNo contact information available

Full Description

Performs quarterly preventative maintenance, inspections, and as-needed repairs for prime contractors on Bureau of Reclamation projects at Glen Canyon Dam. Conducts routine inspections and executes repairs for three government-owned Xerox VersaLink copier/printer devices using compatible service tools and parts. Adheres to OSHA 29 CFR standards and RSHS manual requirements. Delivers operational equipment and completed maintenance reports.