Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

CROWN AGENTS LIMITED

UEI: M5UQYJ953X45CAGE: KE378

CROWN AGENTS LIMITED is a federal contractor, registered under UEI M5UQYJ953X45 and CAGE code KE378. It has been awarded $3,783,402 across 9 federal contracts. Primary work spans All Other Professional, Scientific, and Technical Services, Motor Vehicle Body Manufacturing, and Unknown NAICS. Top awarding agencies include Millennium Challenge Corporation, Department Of Justice (doj), and Department Of Defense.

Contact Information

Registration and classification details

Registration

UEI Code

M5UQYJ953X45

CAGE Code

KE378

Entity Structure

International Organization

Established

N/A

Business Classifications

Foreign OwnedFor Profit Organization

NAICS Codes

541611Administrative Management and General Management Consulting Services(Primary)
541614Process, Physical Distribution, and Logistics Consulting Services
541618Other Management Consulting Services
541620Environmental Consulting Services
541690Other Scientific and Technical Consulting Services
+4 more

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

AI Capability Profile

Crown Agents Limited specializes in providing interim procurement agent services for complex international development and aid programs, operating as a trusted technical and administrative facilitator for U.S. government-funded initiatives. Their core capabilities center on end-to-end procurement li...

Crown Agents Limited specializes in providing interim procurement agent services for complex international development and aid programs, operating as a trusted technical and administrative facilitator for U.S. government-funded initiatives. Their core capabilities center on end-to-end procurement lifecycle management, including contract design, vendor selection, compliance oversight, and supply chain coordination under stringent donor requirements. The firm demonstrates deep expertise in agile procurement frameworks, donor-aligned financial controls, and rapid-response contracting mechanisms tailored to dynamic foreign assistance environments. Their approach emphasizes transparency, risk mitigation, and adherence to international procurement standards, enabling seamless execution of time-sensitive programs where traditional contracting pathways are insufficient. The contractor maintains a consistent relationship with the Millennium Challenge Corporation, serving as an interim procurement agent for high-priority development projects. This partnership reflects a pattern of engagement where Crown Agents acts as a surge capacity provider, stepping in to establish or restructure procurement systems during critical program phases. Their work supports MCC’s mission by ensuring timely, accountable, and efficient delivery of infrastructure and institutional strengthening initiatives through compliant, expedited contracting mechanisms. Their primary NAICS classification under 541990 indicates a focus on specialized professional services that bridge technical execution and administrative oversight in global development contexts. This positions them at the intersection of international aid logistics and public sector procurement innovation, serving as a niche enabler for agencies requiring flexible, non-traditional contracting solutions. Crown Agents Limited is structured as an X6 entity based in London, with no publicly disclosed government certifications. Their operational footprint is international, supporting U.S. government programs through a global delivery model, with no indication of domestic U.S. physical presence. They function as a specialized, non-certified contractor leveraging institutional expertise rather than formal compliance designations to deliver mission-critical procurement services.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency
Millennium Challenge Corporation$2.2M58.1%
Department Of Justice (doj)$1.3M33.2%
Department Of Defense$174.1K4.6%
Agency For International Development (usaid)$154.1K4.1%
Awards by NAICS
Export
541990 - All Other Professional, Scientific, and Technical Services$2.2M58.1%
336211 - Motor Vehicle Body Manufacturing$1.4M36.1%
- Unknown NAICS$167.3K4.4%
611310 - Colleges, Universities, and Professional Schools$45.9K1.2%
Others - Other NAICS codes (1 codes, <0.5% each)$6.8K0.2%
Awards by Agency Over Time
Export
Awards by Place of Performance

Open opportunities in CROWN AGENTS LIMITED's top NAICS codes and agencies

NAICS: 336211
New
DIBBS
GRILLE, METAL
Solicitation # SPE7LX-26-U-9283
This contract is for the procurement of 78 metal grilles under NSN 2510-01-317-5492, issued as a solicitation by the Defense Logistics Agency’s Strategic Acquisitions Program Directorate under solicitation number SPE7LX-26-U-9283. The requirement is a service-disabled veteran-owned small business set-aside with a maximum estimated contract value of $350,000 and a guaranteed minimum quantity of 11 units after award. Delivery is required within 89 days ADO under FOB destination terms, with the items governed by detailed technical specifications referenced in multiple Army and DCSD drawings, including critical finishing requirements for chemical agent-resistant coatings and high-temperature coatings as specified in DCSD Drawing 16236 CS-2300-0001. The product must be manufactured and inspected in accordance with MIL-STD-1916 or comparable zero-based sampling plans, with verification levels tied to critical, major, and minor attributes, and the manufacturer’s inspection system must comply with SAE AS9003 or ISO 9001 tailored to AS9003 standards. Packaging and marking must conform to SPI AK13175492 Revision B, MIL-STD-2073-1E, and MIL-STD-129, using designated preservation, wrapping, and unit container codes, while prohibited materials such as ozone-depleting chemicals and hexavalent chromium are explicitly banned. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, and access is restricted to contractors approved under the US/Canada Joint Certification Program who have completed required training and documentation. The contract incorporates a broad array of FAR and DFARS clauses, including cybersecurity mandates requiring NIST SP 800-171 compliance under DFARS 252.240-7997 and safeguarding of covered defense information under 252.204-7012. Payment must be processed electronically through WAWF with both an invoice and receiving report submitted unless exempted. All offerors must maintain active SAM registration and certify compliance with Buy American and Berry Amendment requirements, with the Berry Amendment threshold reduced to $150,000. The award will be made on a best-value basis considering price and other factors, and the contract will function as an indefinite delivery contract with a one
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541990
New
Federal
J042--Fire Alarm System Inspection, Testing, Maintenance, and Certification Services at the Bedford VA Medical Center
Solicitation # 36C24126Q0613_0001
This contract, issued under solicitation number 36C24126Q0613 and amended via Amendment No. 0003 on July 27, 2026, is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for Fire Alarm System Inspection, Testing, Maintenance, and Certification Services at the Bedford VA Medical Center and its affiliated Community-Based Outpatient Clinics in Massachusetts. The scope includes routine and emergency maintenance of fire alarm systems, fire suppression systems, kitchen suppression systems, and fire extinguishers across multiple locations, with services governed by VHA directives, NFPA 72, OSHA regulations, and The Joint Commission standards. The contract features a one-year base period beginning September 1, 2026, and four one-year option periods extending through August 31, 2031, with an additional six-month option for extension under FAR 52.217-8. The majority of fire extinguishers (712 of 719) operate on a 12-year life cycle with 6-year maintenance intervals, while three 10lb Carbon Dioxide and four 6Ltr Class K extinguishers follow a 5-year life cycle. No equipment upgrades are included; the contract is strictly limited to the replacement of existing components, with future upgrades like the EST3 to EST4 transition planned separately. Performance must comply with strict quality thresholds, including 99% response times for service requests and 100% accuracy in tracking unique device identifiers. Quarterly testing of 25% of devices and annual comprehensive system testing are required, with all activities documented and submitted for COR approval. The evaluation process is trade-off based, prioritizing technical capability and past performance before price, and is not LPTA. Offerors must be current in SAM with a valid UEI, self-certify as SDVOSB under NAICS 541990, and comply with FAR clauses including 52.209-9, 52.212-4, 52.217-8, and VA-specific clauses such as 852.219-73 and 852.204-70, which require identity verification and credentialing of personnel. Proposals must be submitted electronically by August 10, 2026, at noon Eastern Time via
241-NETWORK Contract Office 01 (36C241)

POSTED

about 13 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336211
New
Federal
ACE Trailer
Solicitation # W50S8U-26-Q-A013
The U.S. Department of Defense, through W7NV USPFO Activity OKANG 138 in Tulsa, Oklahoma, is soliciting a single mobile enclosed gooseneck stage trailer under solicitation W50S8U-26-Q-A013, with a firm fixed price structure and a total small business set-aside. The trailer must be a commercial off-the-shelf item, fully assembled and road-ready, meeting all applicable Federal Motor Vehicle Safety Standards and Department of Transportation requirements. It is to be approximately 36 feet in length with an 8.5-foot width and a minimum 8-foot interior height, featuring a triple axle suspension system with a gross vehicle weight rating of at least 20,000 pounds and 7,000-pound capacity per axle. The trailer must integrate a fold-out stage system with stabilization, rear ramp access, and at least one side entry door, along with a full restroom including a sink and toilet, a compact refrigerator, microwave, Bluetooth-capable audio system, shore power hookup, LED lighting, roof ventilation, and a floor-mounted E-track or tie-down system. An electric winch with a minimum 10,000-pound capacity, DOT-compliant reflective markings, corrosion protection, and bogey wheels or rear skid protection are also required. All systems, including stage deployment, lighting, braking, electrical, audio, and utility components, must be fully functional upon delivery. The trailer must include all standard manufacturer documentation, warranties, and operating manuals, and be delivered to the specified location at 4201 North 93rd East Ave, Building 240, Tulsa, Oklahoma, by September 24, 2026, with transportation costs borne by the contractor. The trailer must be uniquely identified in accordance with MIL-STD-130, incorporating a two-dimensional Data Matrix symbol compliant with ISO/IEC 16022, and all packaging and shipping must adhere to MIL-STD-129. Contractors must comply with stringent cybersecurity requirements under DFARS 252.204-7012, safeguarding covered defense information, and are prohibited from using covered telecommunications equipment under DFARS 252.204-7018 and hexavalent chromium under DFARS 252.223-7008. The contract incorporates Buy American and Balance of Payments Program requirements, restrictions on ball and
W7NV Uspfo Activity Okang 138

POSTED

about 13 hours ago

DEADLINE

in about 18 hours
View Details
NAICS: 541990
New
Federal
Macroeconomic Impacts of Highway Investment
Solicitation # 6913G626Q300045
The U.S. Department of Transportation’s Volpe National Transportation Systems Center is soliciting contractor support to perform macroeconomic modeling analyzing the impacts of highway investments in the United States, using the offeror’s proprietary model. This solicitation, identified as 6913G626Q300045, is conducted under FAR Part 12 for commercial items and FAR Part 13 simplified acquisition procedures, with the NAICS code 541990 and a small business size standard of $19.5 million. Offers must be submitted as firm fixed price quotations covering a base period with 20 optional line items, each requiring a specific dollar amount and a total sum. The deadline for submitting offers has been amended to August 13, 2026, at 3:00 PM Eastern Time, with all questions due by August 6, 2026, at 2:00 PM Eastern Time. Offers must be emailed to Karen Marino at the specified address, include the solicitation number, offeror’s Unique Entity Identifier, contact information, and a statement of agreement with all terms. Offerors must hold their prices firm for 60 days after the submission deadline, and awards will be made without discussions unless necessary, based on a best value determination considering price and other factors. The contract will incorporate FAR provisions 52.212-1, 52.212-2, and 52.212-4, along with additional clauses including evaluation of options and electronic submission of payment requests via TAR clause 1252.232-70. Contractors must maintain active SAM registration throughout the contract term.
6913G6 Volpe National Transportation System Cntr

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541990
New
Federal
3D LiDAR AND SMARTPHONE-BASED PLATFORMS FOR MOTOR VEHICLE TRAFFIC DATA
Solicitation # 693JJ326Q000027
This contract is a non-personal services firm-fixed-price purchase order issued by the U.S. Department of Transportation’s Federal Highway Administration under solicitation number 693JJ326Q000027 to assess a dual-platform approach for collecting roadway data using high-resolution 3D LiDAR and smartphone-based systems. The purpose is to evaluate the feasibility and effectiveness of these technologies in enhancing safety and operational efficiency at selected roadway sites, particularly by reconstructing geometric layouts, identifying roadside and overhead signs, and assessing stopping sight distances in compliance with AASHTO Greenbook standards. Work requires collecting data from vehicles in motion at one innovative intersection or interchange and approximately two miles of winding roadways, leveraging both a 3D LiDAR platform meeting a minimum point density of 1,000 points per square meter with a 200-meter effective range and a smartphone-based platform recruiting 25 local drivers. Key deliverables include raw 3D LiDAR scan datasets, a 3D digital model of the facilities, and a Section 508-compliant final report assessing the data’s utility for safety and operational analysis. The procurement follows a Lowest Price Technically Acceptable (LPTA) selection process, where technical and management approach and staffing approach are evaluated on a pass/fail basis to ensure vendors understand the tasks and have qualified personnel, while award is made to the technically acceptable offeror with the lowest price. Proposals must be submitted as a single email under 10 megabytes containing a completed Excel pricing schedule, mandatory business details including SAM.gov registration status, Unique Entity ID, Federal Tax ID, business size, and confirmation of adherence to FAR terms, along with detailed technical and staffing narratives supported by resumes and project plans. The contract has a 24-month performance period, with all tasks bound by this timeframe, and requires electronic invoicing through the DOT’s Delphi Invoicing portal via www.login.gov, with payment terms set at NET 30. Contractors must comply with numerous FAR and Transportation Acquisition Regulation clauses covering labor standards, whistleblower rights, cybersecurity prohibitions, fraud and trafficking prevention, payment methods, and site-specific safety requirements including seat belt use and bans on text messaging while driving. All offerors must be active in SAM.gov, with matching entity and mailing information, and must certify the accuracy of all submitted data. The work will be performed both at the contractor’s facility and in the field, with acceptance criteria defined in technical exhibits that mandate error-free documentation
693JJ3 Acquisition And Grants Mgt

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336211
New
DIBBS
ANGLE, FENDER REINFO
Solicitation # SPE7L4-26-T-5978
The contract pertains to the procurement of an aluminum angle reinforcement component for fender applications, identified by NSN 2510-00-983-6886 and part number 10911305-2, with a quantity of 73 units. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the associated technical data is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received formal approval from the DLA controlling authority. The purchase request number is 7016286376, with a delivery timeline of 219 days after contract award. The solicitation, issued under contract number SPE7L4-26-T-5978, was posted on August 4, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 336211 and is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance delivery slated for New Cumberland, PA, 17070-5002. Primary point of contact for inquiries is Ryan Hammond, reachable via email and phone provided in the contract data.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 12 days
View Details