Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Technical Documentation and Manual Updates

Active

Federal

Response Deadline08/19/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development and maintenance of technical documentation for RAT-G and GRRU systems, including manuals, repair procedures, and training guides that must adhere strictly to MIL-STD specifications and configuration-controlled standards. All deliverables must be precisely formatted and controlled to ensure consistency, accuracy, and compliance with military technical documentation requirements. The work involves ongoing updates to reflect system modifications and ensure operational readiness across supported platforms. This is a subcontract under the Department of Defense, managed by NSWC Crane, with performance located in Torrance, California, 90504. The solicitation was posted on August 5, 2026, and responses are due by August 19, 2026. The NAICS code 541990 indicates it falls under other scientific and technical consulting services. There is no set-aside designation, and no point of contact information is provided. Interested parties must submit proposals through the official SAM.gov portal prior to the deadline.

General Info

Develop and maintain MIL-STD technical documentation for RAT-G and GRRU systems under NSWC Crane contract in Torrance, California.

Agency

Department Of Defense → Nswc CraneView Agency

NAICS

541990 - All Other Professional, Scientific, and Technical ServicesView NAICS

Place of Performance

Torrance, CA, 90504, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 08:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Crane

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nswc Crane

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develop and maintain technical manuals, repair procedures, and training guides for RAT-G and GRRU systems, formatted to MIL-STD and configuration-controlled standards.

Similar Contracts

Same NAICS industry code

ESJC – KITCHEN FIRE SUPPRESSION INSPECTIONS

Solicitation # esjc-kitchen-fire-suppression-inspections

The ETR/Excelsior Springs Job Corps in Missouri is seeking qualified vendors to perform kitchen fire suppression inspections under a solicitation open exclusively to small business concerns, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. The procurement, identified by solicitation number esjc-kitchen-fire-suppression-inspections and classified under NAICS code 541990, requires bidders to submit proposals by September 3, 2026, at 12:00 PM CST. All inspections must be conducted at the Excelsior Springs Job Corps facility located at 701 St. Louis Ave, Excelsior Springs, Missouri. Interested parties must contact Michael Bugner at Bugner.Michael@jobcorps.org or by phone at 816-629-3125 to obtain the full Request for Quotation and all necessary documentation to prepare a compliant bid.

ETR/Excelsior Springs Job Corps

POSTED

about 9 hours ago

DEADLINE

J042--Fire Alarm System Inspection, Testing, Maintenance, and Certification Services at the Bedford VA Medical Center

Solicitation # 36C24126Q0613_0001

This contract, issued under solicitation number 36C24126Q0613 and amended via Amendment No. 0003 on July 27, 2026, is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for Fire Alarm System Inspection, Testing, Maintenance, and Certification Services at the Bedford VA Medical Center and its affiliated Community-Based Outpatient Clinics in Massachusetts. The scope includes routine and emergency maintenance of fire alarm systems, fire suppression systems, kitchen suppression systems, and fire extinguishers across multiple locations, with services governed by VHA directives, NFPA 72, OSHA regulations, and The Joint Commission standards. The contract features a one-year base period beginning September 1, 2026, and four one-year option periods extending through August 31, 2031, with an additional six-month option for extension under FAR 52.217-8. The majority of fire extinguishers (712 of 719) operate on a 12-year life cycle with 6-year maintenance intervals, while three 10lb Carbon Dioxide and four 6Ltr Class K extinguishers follow a 5-year life cycle. No equipment upgrades are included; the contract is strictly limited to the replacement of existing components, with future upgrades like the EST3 to EST4 transition planned separately. Performance must comply with strict quality thresholds, including 99% response times for service requests and 100% accuracy in tracking unique device identifiers. Quarterly testing of 25% of devices and annual comprehensive system testing are required, with all activities documented and submitted for COR approval. The evaluation process is trade-off based, prioritizing technical capability and past performance before price, and is not LPTA. Offerors must be current in SAM with a valid UEI, self-certify as SDVOSB under NAICS 541990, and comply with FAR clauses including 52.209-9, 52.212-4, 52.217-8, and VA-specific clauses such as 852.219-73 and 852.204-70, which require identity verification and credentialing of personnel. Proposals must be submitted electronically by August 10, 2026, at noon Eastern Time via

241-NETWORK Contract Office 01 (36C241)

POSTED

about 13 hours ago

DEADLINE

B--laboratory services for tree ring samples

Solicitation # 140G0326Q0149

The U.S. Geological Survey, under the Department of the Interior, is conducting market research to assess the availability of qualified businesses that can provide laboratory services for analyzing tree ring samples, as outlined in the attached Statement of Work. This notice is purely for planning purposes and does not constitute a solicitation for proposals or a commitment to award a contract. Respondents must submit brochures detailing their capability to meet the specified requirements via electronic mail to tracy_huot@ios.doi.gov no later than August 12, 2026, at 5:00 PM Pacific Time; responses sent through hardcopy or the SAM web portal will not be accepted. The applicable NAICS code is 541990 for All Other Professional, Scientific and Technical Services, with a small business size standard of $19.5 million in annual receipts. All responsible sources are encouraged to respond, but no compensation will be provided for costs associated with preparing submission materials. The point of contact for inquiries is Tracy Huot, reachable at thuot@usgs.gov or 916-278-9330, with the office located in Sacramento, California.

Office Of Acquisiton Grants

POSTED

about 13 hours ago

DEADLINE

Macroeconomic Impacts of Highway Investment

Solicitation # 6913G626Q300045

The U.S. Department of Transportation’s Volpe National Transportation Systems Center is soliciting contractor support to perform macroeconomic modeling analyzing the impacts of highway investments in the United States, using the offeror’s proprietary model. This solicitation, identified as 6913G626Q300045, is conducted under FAR Part 12 for commercial items and FAR Part 13 simplified acquisition procedures, with the NAICS code 541990 and a small business size standard of $19.5 million. Offers must be submitted as firm fixed price quotations covering a base period with 20 optional line items, each requiring a specific dollar amount and a total sum. The deadline for submitting offers has been amended to August 13, 2026, at 3:00 PM Eastern Time, with all questions due by August 6, 2026, at 2:00 PM Eastern Time. Offers must be emailed to Karen Marino at the specified address, include the solicitation number, offeror’s Unique Entity Identifier, contact information, and a statement of agreement with all terms. Offerors must hold their prices firm for 60 days after the submission deadline, and awards will be made without discussions unless necessary, based on a best value determination considering price and other factors. The contract will incorporate FAR provisions 52.212-1, 52.212-2, and 52.212-4, along with additional clauses including evaluation of options and electronic submission of payment requests via TAR clause 1252.232-70. Contractors must maintain active SAM registration throughout the contract term.

6913G6 Volpe National Transportation System Cntr

POSTED

about 13 hours ago

DEADLINE

Notice of Intent to Sole Source Bridge Contract, Army National Guard (ARNG) Mission Command Training Support Program (MCTSP)

Solicitation # ARNGMCTSP

W6QK Acc-Orlando

POSTED

about 13 hours ago

DEADLINE

3D LiDAR AND SMARTPHONE-BASED PLATFORMS FOR MOTOR VEHICLE TRAFFIC DATA

Solicitation # 693JJ326Q000027

This contract is a non-personal services firm-fixed-price purchase order issued by the U.S. Department of Transportation’s Federal Highway Administration under solicitation number 693JJ326Q000027 to assess a dual-platform approach for collecting roadway data using high-resolution 3D LiDAR and smartphone-based systems. The purpose is to evaluate the feasibility and effectiveness of these technologies in enhancing safety and operational efficiency at selected roadway sites, particularly by reconstructing geometric layouts, identifying roadside and overhead signs, and assessing stopping sight distances in compliance with AASHTO Greenbook standards. Work requires collecting data from vehicles in motion at one innovative intersection or interchange and approximately two miles of winding roadways, leveraging both a 3D LiDAR platform meeting a minimum point density of 1,000 points per square meter with a 200-meter effective range and a smartphone-based platform recruiting 25 local drivers. Key deliverables include raw 3D LiDAR scan datasets, a 3D digital model of the facilities, and a Section 508-compliant final report assessing the data’s utility for safety and operational analysis. The procurement follows a Lowest Price Technically Acceptable (LPTA) selection process, where technical and management approach and staffing approach are evaluated on a pass/fail basis to ensure vendors understand the tasks and have qualified personnel, while award is made to the technically acceptable offeror with the lowest price. Proposals must be submitted as a single email under 10 megabytes containing a completed Excel pricing schedule, mandatory business details including SAM.gov registration status, Unique Entity ID, Federal Tax ID, business size, and confirmation of adherence to FAR terms, along with detailed technical and staffing narratives supported by resumes and project plans. The contract has a 24-month performance period, with all tasks bound by this timeframe, and requires electronic invoicing through the DOT’s Delphi Invoicing portal via www.login.gov, with payment terms set at NET 30. Contractors must comply with numerous FAR and Transportation Acquisition Regulation clauses covering labor standards, whistleblower rights, cybersecurity prohibitions, fraud and trafficking prevention, payment methods, and site-specific safety requirements including seat belt use and bans on text messaging while driving. All offerors must be active in SAM.gov, with matching entity and mailing information, and must certify the accuracy of all submitted data. The work will be performed both at the contractor’s facility and in the field, with acceptance criteria defined in technical exhibits that mandate error-free documentation

693JJ3 Acquisition And Grants Mgt

POSTED

about 13 hours ago

DEADLINE

Service UnavailableA service outage has prevented the retrieval of prime contract data, making it impossible to identify any subcontract opportunities associated with this posting. The solicitation, posted on August 4, 2026, with a response deadline of August 18, 2026, is categorized as a subcontract under NAICS code 541990, which covers other professional, scientific, and technical services. The agency listed is the California Department of Rehabilitation, operating under the state of California, though no specific office address, point of contact, or place of performance details are available. The type of setaside and organizational type are not specified, and no city, state, or zip code information is provided for either the agency or performance location. The solicitation can be accessed via the provided URL on the CalEprocure portal, but no further contract specifics can be confirmed due to the data retrieval failure.

California Department of Rehabilitation

POSTED

DEADLINE

Data Security and Confidentiality Compliance

POSTED

DEADLINE

Barcoding and Marking ServicesThe contract requires the application of MIL-STD-129 compliant barcodes and RQ017 physical markings to NSN components to enable automated logistics tracking within the Department of Defense supply chain. This subcontract is focused on precise marking standards to ensure uniformity, scannability, and traceability of military assets throughout transportation and inventory systems. All work must adhere strictly to established military specifications to maintain compatibility with existing logistics automation platforms and to support accurate identification and accountability of critical components. The opportunity is posted under NAICS code 541990 and is part of the Maritime Supply Chain initiative under the Department of Defense. Responses are due by August 19, 2026, with the solicitation issued on August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to support defense logistics operations. Contractors must ensure full compliance with marking requirements to avoid rejections or delays in component acceptance and deployment. Participation is limited to qualified subcontractors with demonstrated capability in military-grade marking and traceability processes.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

2D Data Matrix Barcoding and MIL-STD-129 ComplianceThis contract requires the application of serialized 2D Data Matrix barcodes and government-compliant labeling in strict accordance with MIL-STD-129R(3) specifications, ensuring all shipping containers and units are properly marked with required data elements including the National Stock Number, contract number, lot number, and comprehensive shipping information. The labeling must be durable, machine-readable, and fully aligned with Department of Defense standards to support logistics tracking and inventory management across the supply chain. The solicitation is issued as a subcontract under NAICS code 541990 by DLA Dist San Joaquin, a unit within the Department of Defense, with performance required at Tracy, California, ZIP 95304-5000. The opportunity was posted on August 4, 2026, with a firm deadline for responses on August 10, 2026, at 5:00 PM. There is no specified set-aside classification, and the contract is open to qualified subcontractors capable of meeting the technical and regulatory demands of military-grade barcoding and labeling compliance.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Small Business Subcontracting and Accelerated Payments SupportThe contract seeks administrative support to ensure compliance with FAR 52.232-40, focusing on the implementation of accelerated payments to small business subcontractors and the ongoing tracking of compliance requirements. This includes managing documentation, monitoring payment timelines, verifying subcontractor eligibility, and maintaining records to demonstrate adherence to federal regulations designed to promote small business participation in defense contracting. The work involves close coordination with prime contractors and subcontractors to ensure accurate and timely payment processing in accordance with the accelerated payment provisions. The contract is categorized under NAICS code 541990 and pertains to a subcontracting arrangement under the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. Performance is required at the New Cumberland location with ZIP code 17070-5002. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026. While no specific set-aside designation is indicated, the scope centers exclusively on administrative functions to support small business subcontracting obligations under federal acquisition rules, with no mention of direct service delivery or non-compliance-related tasks.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Small Business Accelerated Payment AdministrationThe contract requires administrative support to ensure strict compliance with FAR 52.232-40, which mandates accelerated payments to small business subcontractors. This role involves managing payment processes, verifying subcontractor eligibility, maintaining accurate documentation, and coordinating with internal and external stakeholders to guarantee timely disbursements in accordance with federal regulations. The objective is to facilitate the efficient flow of funds to small businesses while maintaining full compliance with Department of Defense procurement standards. The contract is categorized as a subcontract under NAICS code 541990, which covers other professional, scientific, and technical services, and is issued by the Maritime Supply Chain organization within the Department of Defense. It was posted on August 4, 2026, with a response deadline of August 19, 2026. There is no specified set-aside or geographic restriction for performance, and no point of contact details are provided. All activities must be conducted in alignment with the regulatory framework governing accelerated payments to ensure transparency, accountability, and support for small business participation in federal contracting.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

Logistics and Component Return-to-Service CoordinationThe contract involves managing the end-to-end logistics for failed RAT-G and GRRU units, encompassing receipt, tracking, coordination of repairs, quality inspection, and return shipping to designated fleet or depot locations. All activities must ensure timely and accurate handling of defective components to support mission readiness and maintain operational availability of critical systems. The scope demands strict adherence to quality control protocols and detailed documentation throughout each phase of the return-to-service process. This is a subcontract under the Department of Defense, awarded by NSWC Crane, with performance required at Torrance, California, 90504. The North American Industry Classification System code 488210 reflects the focus on freight arrangement and logistics services. The opportunity was posted on August 5, 2026, with responses due by August 19, 2026. No specific set-aside status or point of contact details are provided, and the process is to be managed through the SAM.gov platform linked for further submission details.

Support Activities for Rail Transportation

POSTED

about 13 hours ago

DEADLINE

Engineering and Technical Support Services for NGJ-MB System IntegrationThe contract seeks engineering and technical support services focused on the NGJ-MB pod, requiring comprehensive systems integration, field service engineering, and detailed failure mode analysis for critical subsystems including RAT-G and GRRU. Work involves performing engineering analysis to support design updates and ensuring operational reliability through hands-on field support, with all tasks centered on enhancing system performance and addressing potential failure mechanisms. The scope demands technical expertise in electronic warfare systems and the ability to deliver actionable insights that inform iterative improvements to mission-critical components. This subcontract is issued by the Naval Surface Warfare Center Crane under the Department of Defense, with performance required in Torrance, California, 90504. The North American Industry Classification System code 541330 identifies the work as engineering services, and the solicitation is open for responses until August 19, 2026, with a posting date of August 5, 2026. No set-aside designation or specific point of contact is provided, and the contract is structured as a subcontract within the broader NGJ-MB program, emphasizing technical precision and operational readiness in a defense context.

Engineering Services

POSTED

about 13 hours ago

DEADLINE

Electronics Repair and Sustainment Services for RAT-G and GRRU ComponentsThe contract seeks contractors to provide depot-level repair, troubleshooting, and lifecycle sustainment services for Ram Air Turbine Generator (RAT-G) and Generator Regulator Rectifier Unit (GRRU) components integrated into the NGJ-MB pod. These services include comprehensive failure analysis, technical support, and maintenance activities essential to maintaining operational readiness and extending the service life of these critical electronic systems. The work is required to meet stringent military standards and ensure uninterrupted functionality of the NGJ-MB pod in mission-critical environments. The contract is issued under the NAICS code 334511 for Electronic Component and Product Manufacturing and is classified as a subcontract solicited by the Naval Surface Warfare Center, Crane Division, under the Department of Defense. Performance is designated to occur in Torrance, California, with a posting date of August 5, 2026, and a response deadline of August 19, 2026. There is no set-aside designation specified, and no point of contact or additional address details are provided in the solicitation. All proposers must demonstrate proven capability in high-reliability electronics repair and sustainment within defense aviation systems.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

Amendment 1-N0016422GWS57_00001 Services to support Airborne Electronic Attack Fleet System

Solicitation # N0016422GWS57_00001

The U.S. Navy’s Naval Surface Warfare Center Crane is seeking noncompetitive services to support the Ram Air Turbine Generator and Generator Regulator Rectifier Unit for the AN/ALQ-249(V)1 Next Generation Jammer – Mid Band Pod and its related subsystems. These services will sustain in-service support across all repair levels including Fleet Support Teams, Organic Depots, and contractor repair sites. The requirement is being awarded solely to Honeywell International Inc. under FAR 6.302-1(a)(2)(ii) due to the company’s exclusive design and manufacturing rights, as well as its irreplaceable technical expertise on these components. The work falls under NAICS code 541330 for engineering services with a projected performance period spanning fiscal years 2022 through 2026. The contract will be awarded through negotiated procedures under FAR Part 15 without a formal request for proposal, and no solicitation will be posted on SAM.gov. Interested parties may submit capability statements, proposals, or quotations directly to the government for consideration, though only Honeywell is eligible for primary award. Subcontracting opportunities must be pursued directly through Honeywell at their Torrance, California location. All contractors must maintain active registration in the System for Award Management, and communications regarding this action must be directed exclusively via email to Theresa Jones, with no telephone inquiries accepted. The deadline for submissions is August 19, 2026, at 4:00 p.m. Eastern Time, and all correspondence must reference the announcement number N0016422RWS57-0001. No amendments or updates to this procurement will be published on SAM.gov.

Engineering Services

POSTED

about 13 hours ago

DEADLINE

Solicitation # N0016426Q0274

The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting a sole-source contract for ten helical gears aligned with specific drawings, contract data requirements, and a detailed statement of work under Federal Supply Class 3020 and NAICS code 333612. The action is being conducted under FAR 13.106-1 due to the gear’s existing integration into the government’s system, with Louis Allis identified as the sole qualified source. While other vendors may submit capability statements, the government retains exclusive discretion to proceed without competition, and submissions from other firms are considered only for future competitive evaluation purposes. Vendors must be actively registered in the System for Award Management, and all proposals must be submitted electronically to cassidy.k.shaw.civ@us.navy.mil no later than 12:00 PM Eastern Time on August 12, 2026. This solicitation, issued under FAR Part 13, bypasses the standard synopsis requirement per FAR 5.202(a)(13), and any amendments or updates will be posted exclusively on sam.gov, which has replaced FBO.gov as the official platform for federal contract opportunities. It is the vendor’s responsibility to monitor sam.gov for revisions, and only those submitting quotes by the deadline will receive post-deadline modifications or be considered for potential award discussions.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # N0016426Q0255

The Naval Surface Warfare Center Crane is soliciting 400 voucher subscriptions for an online Lithium-Ion Battery Development and Manufacturing course under a small business set-aside designated as total, with NAICS code 611430 and a size standard of $15 million. The solicitation, issued as Amendment 0001 to N00164-26-Q-0255, extends the response deadline to August 10, 2026, at 4:00 p.m. EST, and requires full completion of the base solicitation, signed amendment, and evaluation criteria to be considered responsive. Offers must be submitted electronically to Alicia Dobbyn and must come from vendors registered in SAM.gov, with compliance required for all applicable FAR and DFARS clauses, including System for Award Management registration, electronic funds transfer payments, and protections against trafficking, convict labor, and inverted domestic corporations. Award will be made on a Low Price Technically Acceptable basis, with technical acceptability determined by a GO/NO GO evaluation of the vendor’s technical approach and past performance as assessed through the Supplier Performance Risk System, where only Blue, Purple, or Green risk ratings are acceptable. Delivery is FOB Destination to NSWC Crane in Crane, Indiana, with inspection and acceptance conducted by the government at Building 41 Receiving. All deliverables—400 digital library subscriptions to the Electrochemical Society’s workforce development resources—must be provided by September 4, 2026. Contracting and administrative functions are governed by the Wide Area WorkFlow system for invoicing and payment, with the PCO Amy Haworth and TPOC Manda Hayden serving as primary contacts. Cybersecurity compliance is mandatory under DFARS 252.204-7012 and 7025, requiring safeguarding of covered defense information, CMMC Level 1 certification, and reporting of cyber incidents. Additionally, contractors must adhere to supply chain risk management, export control regulations, and prohibitions against subcontracting with entities owned or controlled by state sponsors of terrorism. Packaging and labeling must comply with MIL-STD-129 and MIL-STD-130, including unique item identification via Data Matrix barcodes conforming to ISO/IEC standards. Offerors must affirm their small business status in SAM.gov and provide all required representations and certifications, although no completed submissions or disclosures are included in the solicitation materials.

Professional and Management Development Training

POSTED

DEADLINE

Software Licenses New/Renewals

Solicitation # N0016426Q0281

The U.S. Navy’s Naval Surface Warfare Center Crane is seeking to procure software licenses from Ansys Incorporated under a fixed-price contract for the renewal and new acquisition of Ansys Lumerical Multiphysics, INTERCONNECT, and MODE software packages. The solicitation, numbered N0016426Q0281, was issued on July 31, 2026, with a closing date of August 8, 2026, at 12:00 AM Eastern Daylight Time. The requirement is not a small business set-aside and is being conducted under FAR Part 13 procedures with a synopsis exception. The contract involves seven contract line items: three new licenses for multiphysics, INTERCONNECT, and MODE software, each for one unit; two renewals for INTERCONNECT and MODE software, each for two units; and two reinstatement fees associated with previously lapsed licenses for these same products. The service period for all new and renewed licenses is one year from the date of award, with delivery of software and associated services required within 365 calendar days, except for the reinstatement fees, which must be delivered within one calendar day. All deliverables are to be shipped FOB Destination to NSWC Crane, Indiana, with inspection and acceptance occurring at that location. The contract incorporates extensive compliance requirements mandated by federal regulations and defense-specific directives. Offerors must be actively registered in the System for Award Management and maintain accurate representations and certifications. Cybersecurity compliance is mandatory at CMMC Level 1 (Self-Certified), requiring submission of CMMC Unique Identifiers for all systems handling FCI or CUI. The contractor must adhere to DFARS 252.204-7012 for safeguarding covered defense information, DFARS 252.204-7018 for prohibition on covered telecommunications equipment, and DFARS 252.211-7003 for Unique Item Identification under MIL-STD-130 and MIL-STD-129 standards, including two-dimensional data matrix symbology. The order carries a DO rating under the Defense Priorities and Allocations System for national defense purposes. Additional contract clauses address payment terms, prompt payment discounts, electronic funds transfer, disputes, changes, termination, subcontracting, ethical conduct, equal opportunity, human trafficking, sustainable products, and prohibitions on inverted domestic corporations and business with sanctioned regimes. Payment processing will occur through the W

Software Publishers

POSTED

DEADLINE

Reutilization, Repair, Refubishment, Technical Assistance, Cable Manufacturing, and Obsolescence Management for Navy Tactical Computer Resource (NTCR)

Solicitation # N0016426RLL03

The Naval Surface Warfare Center Crane Division is preparing to issue a full and open competition for a ten-year indefinite delivery, indefinite quantity contract to support the Navy Tactical Computer Resource program through depot-level reutilization, repair, refurbishment, technical assistance, cable manufacturing, and obsolescence management of legacy electronic systems. The contract will be awarded under a hybrid pricing structure combining Firm-Fixed-Price and Cost-Plus-Fixed-Fee terms, with an estimated total value of $49 million and an anticipated award in the second quarter of FY 2027. This effort serves as a follow-on to the existing N00164-18-D-WP41 contract and will support both U.S. Navy and Foreign Military Sales requirements. All work must be delivered FOB Destination, and contractors must maintain active registration in both SAM.gov and the Joint Certification Program to access controlled information and be eligible to respond. The solicitation number is N0016426RLL03, with the pre-solicitation notice published in August 2026 and responses due by August 14, 2026. Although this notice is for information only and does not constitute a commitment to award a contract, interested parties are directed to the designated point of contact, Tim Kinder, for inquiries and must reference the solicitation number in all communications. Proprietary and classified information will be handled in accordance with strict safeguards to prevent unauthorized disclosure. The North American Industry Classification System code for this opportunity is 334511, and no set-aside provisions are being applied. The contract will be administered by the Department of Defense through the Crane, Indiana office, and all submissions must comply with federal acquisition regulations and security protocols.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

COMPUTER EQUIPMENT

Solicitation # N0016426Q0241

The Naval Surface Warfare Center Crane is soliciting two Dell PowerEdge R760 servers, one Dell PowerVault MD2412 storage array, two APC Smart-UPS power supplies, and one Quantum tape drive under a Small Business Set-Aside with a Firm-Fixed-Price contract, using Brand Name or Equal procurement procedures as authorized by FAR 19.502-2(c). The solicitation number is N0016426Q0241, issued under FAR 12 using simplified acquisition procedures, and responses must be submitted electronically to Alicia Dobbyn at Alicia.a.dobbyn.civ@us.navy.mil by 4:00 PM Eastern Time on August 7, 2026, following an amendment that extended the original July 30, 2026 deadline. All offerors must be currently registered in the System for Award Management (SAM) and must submit complete documentation including the signed base solicitation, signed amendment, completed evaluation criteria, technical evaluation matrix, letter of supply, and product literature for any “Equal” alternatives to be considered responsive. Delivery is FOB Destination to NSWC Crane, 300 Highway 361, Crane, IN 47522-5001, with a required delivery date of October 26, 2026. Compliance with MIL-STD-130 and MIL-STD-129 is mandatory for Unique Item Identification and shipment labeling, requiring two-dimensional Data Matrix symbols compliant with ISO/IEC 16022 and encoded with enterprise identifier and serial number data per ISO/IEC 15434. Technical acceptability is assessed through a GO/NO GO evaluation based on conformance to specifications, on-time delivery, and past performance using Supplier Performance Risk System (SPRS) ratings—any Yellow or Red risk status results in rejection. Pricing is evaluated solely after technical acceptability, with award going to the lowest-priced technically acceptable offer under a Low Price Technically Acceptable (LPTA) method. Electronic invoicing via Wide Area WorkFlow (WAWF) is required, and the contract incorporates critical DFARS clauses including 252.204-7012 (cybersecurity safeguarding of Covered Defense Information), 252.204-7018 (prohibition on certain telecommunications equipment), and 252.22

Computer Storage Device Manufacturing

POSTED

DEADLINE

SOURCES SOUGHT/REQUEST FOR INFORMATION Sources Sought/(RFI) PAE MARITIME PMS 326 SYSTEMS PROFESSIONAL CONTRACT SUPPORT SERVICES FOR PROGRAM MANAGEMENT

Solicitation # N0016426SNB97

The U.S. Navy’s Naval Surface Warfare Center Crane Division, acting on behalf of the Portfolio Acquisition Executive Maritime PMS 326, is conducting market research through a Sources Sought/Request for Information (RFI) to gather industry input on Systems Professional Contract Support Services for Program Management. This RFI, identified by solicitation number N0016426SNB97 and posted on August 3, 2026, is strictly for planning and informational purposes and does not constitute a solicitation for offers or a commitment to award a contract. Responses are due by 7:00 PM Eastern Time on August 17, 2026, and should address the attached Draft Statement of Work to help the government assess industry capabilities, potential sources, and market conditions. The North American Industry Classification System code associated with this effort is 541330, reflecting engineering services. The office responsible for this effort is located in Crane, Indiana, with a zip code of 47522-5001, and the primary point of contact is Bryan Stratton, reachable via email at bryan.j.stratton2.civ@us.navy.mil or by phone at 812-381-7247. The place of performance is indicated as Washington, D.C., with a zip code of 20376, suggesting that work may be performed remotely or in proximity to federal program management hubs. No set-aside classification is specified, indicating that this RFI is open to all eligible entities regardless of size or socioeconomic status. Responses will inform future procurement decisions but will not result in immediate contract awards.

Engineering Services

POSTED

DEADLINE

BAGHOUSE PRVENTIVE MAINTANCE

Solicitation # N0016426Q0264

The contract solicitation N00164-26-Q-0264, issued by the Naval Surface Warfare Center Crane, seeks qualified small businesses to provide quarterly preventive maintenance and inspection services for baghouse dust collectors in Buildings 365 and 366 at the Crane, Indiana facility. This requirement is set aside entirely for small business concern participation and mandates compliance with CMMC Level 2 cybersecurity standards through self-assessment. The initial performance period includes four quarterly services per year for each building, with options available to extend the contract for up to five additional years, structured in annual increments with separate line items for each building. Offerors must be currently registered in the System for Award Management, comply with FAR and DFARS clauses including those related to business ethics, supply chain security, trafficking in persons, and identity verification, and submit proposals via email to the designated contracting officer by the revised closing date of August 10, 2026, at 4:00 PM Eastern Time. The evaluation process will assess proposals based on technical approach, delivery capability, and price, using a best value trade-off methodology rather than lowest price technically acceptable. Performance will be measured against the Statement of Work, which requires adherence to OSHA safety standards, manufacturer guidelines, and specific documentation deliverables including maintenance reports, environmental health plans, and hazard analyses. Invoicing must be submitted exclusively through Wide Area WorkFlow with mandatory notification to both the contracting officer and contracting officer representative. The place of performance and delivery is FOB Destination Crane, IN, and all work must conform to federal, state, and Navy-specific regulations. While the contract structure is fully defined with detailed CLINs and options, pricing details are not provided in the solicitation, and no packaging, marking, or preservation requirements are specified.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Packaging, Marking, and Logistics to NSWC CraneThe contract requires the packaging and marking of baffle rings in strict compliance with MIL-STD-129 and MIL-STD-130 standards, including the application of unique item identification (UID) markings as mandated. All work must be performed to ensure full adherence to military logistics and traceability requirements. The finished products are to be shipped to NSWC Crane, Indiana, with delivery terms specified as F.o.B. Destination, meaning the supplier is responsible for all transportation costs and risks until the items arrive at the designated location. The solicitation is classified as a subcontract under NAICS code 561910, which corresponds to support activities for animal production, though the nature of the work indicates a focus on defense logistics and packaging services. The opportunity was posted on July 31, 2026, with a response deadline of August 6, 2026, at 6:00 p.m. Eastern Time. Performance is to take place at the Crane, Indiana facility, identified by the zip code 47522, under the oversight of the Department of Defense through NSWC Crane. The contract emphasizes precise compliance with federal military standards and timely delivery to meet operational needs.

Packaging and Labeling Services

POSTED

DEADLINE

in about 17 hours