Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

19 -- Petersburg Vessel Replacement Package

Active
AG-0114-S-08-0008Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicitation seeks bids for a turnkey vessel package consisting of a 23-foot long, 8-foot wide welded aluminum mono-hull landing craft designed for shallow draft operation, including the ability to operate in rough seas and beach at low tide with the engine fully raised. The vessel must have a walk-around enclosed cabin seating four passengers, with cargo capacity for large planks either along the centerline or sides of the cabin. It will be outfitted with standard navigational lighting, hydraulic steering, trim tabs, an auxiliary outboard motor bracket, and have fuel capacity for 150 nautical miles when fully loaded. The hull will be marine grade aluminum with appropriate coatings and self-bailing decks, and include cargo tie-downs and non-skid surfaces. The package also includes a Mercury four-stroke outboard engine installed to propel the vessel with a 2,000 lb payload and shipping FOB Petersburg, Alaska. The contract is a total small business set-aside under NAICS code 336612, with responses due by April 26, 2008, and delivery not later than March 2, 2009. Evaluation criteria prioritize technical compliance, hull design past performance, and price, with equal weighting given to technical factors combined versus price. Proposals must include supporting documentation and adhere to applicable federal acquisition regulations and clauses related to commercial items, equal opportunity, and small business requirements. Points of contact are provided for submission and inquiries.

General Info

Bids invited for 23-foot aluminum landing craft with Mercury engine, 4-passenger cabin, delivery Alaska.

NAICS

336612 - Boat Building

Place of Performance

USDA Forest ServicePetersburg Ranger District 12 North Nordic Drive Petersburg, Alaska 99833, AK

Set-Aside

SBA

Documents

1

sf-30_amendment_to_solicitation.doc

DOC

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseCombined Synopsis
Posted

Combined Synopsis

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Agriculture → R10 Alaska Regional Office
Contacts2 people available
OfficeJUNEAU, AK, 99802, USA
Office AddressJUNEAU, AK, 99802, USA

Full Description

Show more
THIS AMENDMENT TO THE SOLICITATION EXTENDS THE DATE OF THE BID CLOSING, FINITELY DESCRIBES THE CABIN CONFIGERATION, AND HAULING CAPACITY. This is a combined synopsis/solicitation for a 23 ft. long 8 ft. wide welded aluminum mono-hull aluminum vessel equipped with a Mercury four stroke outboard engine, a commercial item, prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This notice is considered to be Solicitation AG-0114-S-08-0008 and is being issued as a Request for Quote. This solicitation incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-24. This requirement is set-aside for small business concerns. NAICS code 336612 is applicable. The small business size standard for this code is: 500 employees. Line Item 1 Description: 23 ft. welded aluminum mono-hulled landing craft type vessel. Capable of shallow draft operation in rough seas and ability to sit on beach at low tide with engine raised fully out of water. The vessel should have an enclosed, walk-around style cabin capable of seating up to four passengers, and provide the capability to carry 14 in by 16 ft planks either, along the center line of the boat or along each side of the cabin. Vessel shall be equipped with standard navigational lighting and appurtenances including hydraulic steering and trim tabs and further equipped with an auxiliary outboard kicker bracket suitable for supporting a 15 hp four stroke motor. Vessel shall have on board fuel capacity for 150 nautical miles fully loaded. All vessel walking surfaces shall be coated with non-skid paint including inside of bow door. Vessel hull shall be coated with anti-fouling black paint to 4 inches above water line. Vessel shall be fabricated with marine grade 5086 aluminum or better. Hull bottom and sides shall be quarter-inch marine grade aluminum or better. Scuppers shall allow decks to self-bail. Forward deck shall be equipped with cargo tie down bars on each side. $ __________________________ Line Item 2 Description: Mercury four-stroke outboard engine, completely installed, capable of economically propelling the vessel and a 2000 lb payload. $___________________________ Line Item 3 Description: Shipping FOB Petersburg Alaska 99833 $___________________________ Above line items comprise a turnkey unit delivered not later than March 2, 2009. FAR 52.212-1, Instructions to Offerors Commercial Items applies to this acquisition. FAR 52.212-2, Evaluation Commercial Items applies to this acquisition. The following criteria shall be used to evaluate quotations received. (1) Technical Factors: the degree to which the proposed craft meets the outlined requirements. Include catalog cut sheets, photographs or other written information sufficient to establish whether the item quoted meets the specified requirements; (2) Hull Design Past Performance. Submit information establishing capability of open water operations and customer satisfaction; and (3) Price. Factors 1 and 2 in combination are roughly equal in importance to factor 3. Responses should include a completed copy of FAR 52.212-3, Offeror Representations and Certifications Commercial Items. Any resulting contract will include FAR 52.212-4, Contract Terms and Conditions Commercial Items. Any resulting contract will include FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items. The following clauses within this clause are applicable: FAR 52.219-6 Notice of Total Small Business Set-Aside, FAR 52.222-26 Equal Opportunity, FAR 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans, FAR 52.222-36, Affirmative Action for Workers with Disabilities, FAR 52.222-37, Employment Reports on Special Disabled Veteras, Veterans of the Vietnam Era, and Other Eligible Veterans, FAR 52.225-3 Buy American Act Free Trade Agreements Israeli Trade Act, FAR 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration. Responses to this solicitation are due at close of business, April 26, 2008. Responses may be submitted in hard copy to 204 Siginaka Way, Sitka, Alaska 99835, via email to contact@example.gov, or fax +1 (555) 000-0000. Please include your DUNS and Tax Identification Number (TIN) with your quote. Contact Kay Steffey (tel +1 (555) 000-0000) or Steve Patton (tel +1 (555) 000-0000) for information regarding this solicitation. The USDA is an equal opportunity provider and employer.

Similar Contracts

Same NAICS industry code

NAICS: 336612
New
Federal
PROPELLER,MARINE
Solicitation # N0010427QUA31
This solicitation, issued by the Navsup Weapon Systems Support Mech office, is for the repair, manufacture, inspection, testing, and packaging of a Left Hand (LH) LCU 1600 Class Marine Propeller (NSN 7HH 2010-01-607-6494). The government is seeking a single award based on a firm-fixed price, where past performance is weighted as more important than price. The scope includes the teardown and evaluation of the asset, with a requested Repair Turnaround Time (RTAT) of 118 days after receipt. Failure to meet this RTAT may result in a price reduction per unit per month, to be implemented via a reconciliation modification. The contractor must be an authorized repair source and adhere to strict quality and technical standards, including NAVSEA drawing 245-5110169 and MIL-STD packaging requirements. Key deliverables include inspection system reports and material composition certifications submitted via DD Form 1423. Administrative requirements include electronic invoicing through Wide Area Workflow (WAWF), Commercial Asset Visibility (CAV) reporting, and compliance with Cybersecurity Maturity Model Certification (CMMC) and IUID requirements. The award will be made to the offeror determined to be most advantageous to the government, considering price and past performance as evaluated through the Supplier Performance Risk System (SPRS).
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336612
New
Federal
GLAND,ACTUATOR
Solicitation # N0010426QYAJZ
Solicitation N00104-26-Q-YAJZ is a competitive, fixed-price procurement for the manufacture of Gland Actuators (NSN 2040-01-093-7730) for use on Navy submarines. The requirement is categorized under NAICS code 336612 with a small business size standard of 1,000. Award will be made to the eligible, responsible offeror with the lowest price technically acceptable (LPTA) quote, though the government may consider past performance as a higher priority than price when determining the most advantageous offer. Technical requirements specify that the actuators must be manufactured from Nickel-Aluminum-Bronze per ASTM B150/B150M and adhere to drawing 4398602. The contract mandates strict quality assurance, including a mandatory first article testing and inspection process and the submission of a Quality Inspection and Test Plan for government approval. All supplied materials must be mercury-free, and the contractor must provide comprehensive objective quality evidence, including certified mill certifications and nondestructive testing reports. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipping levels. The contractor is responsible for all inspections at the origin, with final acceptance conducted by the cognizant DCMA-QAR in coordination with the Naval Surface Warfare Center, Philadelphia Division.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 29 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS