Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on September 24, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

20--engineering and technical services in support of the analysis, maintenance, improvement, alteration and modification of existing L-3 Marine Systems manufactured equipment

Awarded
N6554011R5004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
SLED
F&W, 2018 Munson Packman Boat Repower project
Solicitation # 2018 Munson Packman Boat Repower
The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration on a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the installation of Honda iST electronic control heads at primary and secondary helm stations, integration with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist Steering system, and a full fuel system upgrade using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two hour sea trial to validate performance and safety protocols. The selected contractor must be a Honda Marine Authorized Dealer or Service Center and provide a secure facility for vessel storage. Proposals are due by November 13, 2026, and will be evaluated based on a 100 point scale with significant preference given to Colville and other Indian Business Enterprises. Award criteria prioritize reliability and effectiveness over the lowest cost. Contractual requirements include a performance bond for awards exceeding 100,000 dollars or a 25 percent retainage, comprehensive liability and workers compensation insurance, and consent to the jurisdiction of the Colville Tribal Court. Payments are subject to the tribal appropriation process and the availability of funds in the tribal treasury.
Confederated Tribes of the Colville Reservation

POSTED

about 8 hours ago

DEADLINE

in 9 days
NAICS: 336611
New
Federal
Maintenance, Repair, and Preservation of Edgecumbe Barge
Solicitation # N4523A26Q1006
The Puget Sound Naval Shipyard and Intermediate Maintenance Facility intends to award a stand-alone Firm-Fixed-Price contract for the maintenance, repair, and preservation of one Edgecumbe RCD Barge. The scope of work includes docking and undocking the vessel, performing hull and structural repairs, replacing zinc anodes, and conducting tank and void cleaning and air tests to support ABS and USCG inspections. The contractor is responsible for transporting the vessel from the government facility in Bremerton, Washington, to their own facility and returning it upon completion. To ensure proper oversight, the contractor's facility must be located within the Puget Sound region, defined as the West Coast of the continental US from Olympia to Bellingham, Washington. The period of performance is scheduled from 15 December 2026 to 19 February 2027, with a quote submission deadline of 13 November 2026. Technical requirements mandate that all welders be certified by the American Weld Society and American Bureau of Shipping, and the contractor must maintain a documented Heavy Weather Plan. Quality standards require adherence to commercial marine practices, including specific surface preparation and coating standards such as SSPC-SP-1. Offerors must be registered in the System for Award Management and provide a detailed cost proposal that includes a five-way breakdown of waste management and disposal costs.
Puget Sound Naval Shipyard IMF

POSTED

about 13 hours ago

DEADLINE

in 9 days
NAICS: 336611
New
Federal
TSV4 NARR MESSING AND MODERNIZATION
Solicitation # N0018927QL008
Solicitation N0018927QL008 is a firm-fixed-price effort issued by NAVSUP FLT LOG CTR Norfolk for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades aboard the TSV4 Narragansett. The scope of work focuses on the assessment and documentation of messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story, Virginia. This is a professional services contract limited to engineering and planning; it specifically excludes the procurement, fabrication, or installation of any shipboard components. The project is 100 percent set aside for Small Business and Service-Disabled Veteran-Owned Small Businesses under NAICS code 336611. Key deliverables include an electronic draft drawing package and BOM due 40 calendar days after award, with final electronic files and two full-size paper copies due within 61 calendar days. The contractor must adhere to several technical standards, including MIL-STD-2003 for electrical installations, MIL-STD-777 for piping components, and NAVSEA General Specifications for Overhaul of Surface Ships. Award is based on best value, requiring a pass on a mandatory ship check at Colonna's Shipyard in Norfolk, VA, and an acceptable technical approach. Failure to attend the mandatory site visit results in disqualification. Payment will be processed electronically via the Wide Area WorkFlow system.
Navsup Flt Logistics Ctr Norfolk

POSTED

about 13 hours ago

DEADLINE

in 8 days
NAICS: 336611
New
Federal
Multi Mission Surface Combatant (MMSC) Post Delivery Execution Yard (PDEY)
Solicitation # N6117727R0003
Solicitation N61177-27-R-0003 is for the Multi Mission Surface Combatant (MMSC) Post Delivery Execution Yard (PDEY) contract, managed by Navsea HQ. The objective is to execute post-delivery availabilities for four MMSC ships, with each vessel undergoing a 14-month post-delivery period. The scope of work includes the management and execution of three primary availabilities per ship: the Post Shakedown Availability (PSA), the Industrial Post Delivery Availability (IPDA), and the Continuous Maintenance Availability (CMAV), as well as any concurrent Planned Maintenance Availabilities (PMAVs). Key contractor responsibilities include providing a NAVSEA-certified drydock for PSAs, performing emergent work, and conducting Post Repair Trials (PRT) to ensure system operability. The contract is structured using Cost Plus Award Fee (CPAF) task orders, with a total performance period not to exceed five years. Work for PSAs and IPDAs will be performed at the contractor's facilities, while CMAVs will be executed at Naval Station Mayport. Award evaluation is based on non-cost factors including management capability, facility and production capabilities, and the proposed approach for PSA, IPDA, and CMAV execution. Performance will be measured against weighted objectives for schedule (35%), management (30%), technical (20%), and cost (30%) performance. The solicitation requires strict adherence to quality standards such as ISO 9001:2015 and specific military marking and packaging standards including MIL-STD-130 and MIL-STD-129.
Navsea Hq

POSTED

about 13 hours ago

DEADLINE

in 2 months
NAICS: 336611
New
Federal
CGC KUKUI DRYDOCK
Solicitation # 70ZU0227QIBCT0001
Solicitation 70ZU0227QIBCT0001 is an Indefinite Delivery Requirement Contract (IDR) for the FY27 drydock availability of the USCGC KUKUI (WLB 203), a 225-foot Buoy Tender homeported in Sitka, Alaska. The project involves comprehensive drydock repairs, including extensive preservation of the hull, exterior decks, superstructure, ballast and potable water tanks, and various internal mechanical components. Performance will take place at the contractor's facility from February 2, 2027, to May 18, 2027, with an anticipated award date of January 18, 2027. This requirement is a total small business set-aside under NAICS code 336611, with a size standard of 1,300 employees. The award will be granted to the responsible quoter providing the most advantageous quote, based on a lowest-price technically acceptable basis. Evaluation factors include a pass/fail assessment of technical capability and past performance within the last three years. Contractors must provide a comprehensive execution plan for lodging and messing, facility certifications, and docking calculations in accordance with SFLC Standard Specifications 0740 and 8634. Quotes must be submitted via email by November 23, 2026, and must include a detailed technical proposal separate from the pricing sheet. Order limitations are set with a minimum order of 1,000 dollars and a maximum combination order of 7 million dollars.
CG-SEA-C22

POSTED

about 13 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The Naval Surface Warfare Center Carderock Division plans to negotiate a sole source indefinite delivery indefinite quantity contract with L-3 Henschel Inc. for a five-year period. The contract will cover engineering and technical services necessary to support the analysis, maintenance, improvement, alteration, and modification of existing L-3 Marine Systems equipment installed on various U.S. Navy ship classes and land-based test facilities. This procurement will be conducted under the authority that allows for non-competitive contracting when only one responsible source is available, as outlined in 10 USC 2304(c)(1) and FAR 6.302-1. The contract type is expected to be Cost Plus Fixed Fee/Firm Fixed Price, classified under NAICS code 336611. Interested parties may express their interest, though the contract is intended to be awarded without full competition. Proposals submitted within 30 days of the notice’s publication will be considered, but the government reserves the discretion not to compete the contract further. The solicitation is expected to be released around January 3, 2011, with a 30-day response window. Communications and written requests regarding the solicitation should be directed to Jane DeMatto, Contract Specialist at the Naval Surface Warfare Center Carderock Division in Philadelphia.

General Info

Five-year sole source contract with L-3 Henschel for Navy marine systems engineering services.

Contract Value

$39,688,612.99

NAICS

336611 - Ship Building and Repairing

Place of Performance

MD

Set-Aside

NONE

Award Issued Date

Documents

1
PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Presolicitation

Justification (J&A)

Justification & Approval published

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Carderock
Contacts1 person available
OfficeBETHESDA, MD, 20817-5700, USA
Office AddressBETHESDA, MD, 20817-5700, USA
Contacts

Full Description

Show more
The Naval Surface Warfare Center Carderock Division (NSWCCD) Philadelphia, PA intends to negotiate a new five year indefinite delivery indefinite quantity contract with one source L-3 Henschel Inc. located in Newburyport, MA to procure engineering and technical services in support of the analysis, maintenance, improvement, alteration and modification of existing L-3 Marine Systems manufactured equipment currently installed on multiple ship classes of the U.S. Navy and land based test facilities. It is intended to negotiate this requirement on a sole source basis pursuant to 10 USC Code 2304 (c)(1) and FAR 6.302-1 – Only one responsible source and no other supplies or services will satisfy agency requirements. A Cost Plus Fixed Fee/Firm Fixed Price contract is anticipated. The applicable NAICS Code is 336611. Interested parties may communicate their interest and capability to this requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within thirty (30) days after the date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract among responses to this notice is solely within the discretion of the Government. Written requests can be submitted to the Naval Surface Warfare center Carderock Division Philadelphia Office, 5001 South Broad Street, Philadelphia, Pa 19112-1403, Attn: Jane DeMatto, Code 3351. The solicitation will be released on or about 03 January 2011 and will close thirty (30) days thereafter. The authority permitting other than full and open competition is 10 USC 2304(c)(1) and FAR 6.302-1. Point of Contact is Jane DeMatto/Contract Specialist who can be reached preferably by email at:contact@example.gov.

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

NAICS: 336611
New
Federal
Propulsor Device Machining
Solicitation # N0016727Q1004
The Naval Surface Warfare Center Carderock Division (NSWCCD) is soliciting quotes for solicitation N0016727Q1004 to perform propulsor component machining for VIRGINIA Class propulsor devices. This firm-fixed-price contract is a total small business set-aside under NAICS 336611. The scope of work involves the fabrication of various piece parts, including body tubes, top caps, bottom caps, center masses, and shim rings. While the government provides raw materials for most components, the contractor is responsible for procuring mild steel ASTM A106 for the R4 shim rings. The period of performance extends from the date of award through July 18, 2027, with specific delivery dates for various line items requested by July 30, 2027. Award will be granted to the responsible quoter who provides a technically acceptable quote representing the best value, specifically the lowest evaluated price. Technical acceptability is determined on a pass/fail basis, and the government may consider past performance via the Supplier Performance Risk System (SPRS). Contractors must maintain a Quality Management System compliant with ANSI/ASQ/ISO 9001:2015 and meet CMMC Level 2 cybersecurity requirements. Deliverables include lot acceptance inspection results, certificates of conformance, and monthly progress reports. All parts must be cleaned with acetone and marked with unique item identifiers per MIL-STD-130 before being shipped to destinations in Bethesda, Maryland, or Kittery, Maine. Questions are due by November 4, 2026, and final quote packages must be submitted by November 12, 2026.
Ship Building and Repairing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 325998
New
Federal
RFI to conduct market research to identify potential vendors with products available that meet the capability criteria listed
Solicitation # 27-SIMACQ-CD-61-0006
The Naval Surface Warfare Center Carderock Division is issuing this Request for Information under solicitation number 27-SIMACQ-CD-61-0006 to conduct market research for foaming Corrosion Preventive Compound (CPC) barriers. These barriers are intended to protect inaccessible interior parts of ground vehicles and tactical assets, such as frame rails and enclosed cavities, in very high corrosivity environments. The government is seeking potential vendors capable of providing a non-permanent coating that can cover void spaces up to 4 inches in diameter and 2 feet in length, cure to a non-tacky film, and provide corrosion prevention for at least one year. The product must be removable via high-pressure steam or solvent-based cleaners and maintain a shelf life of at least two years. This is a sources-sought notice for planning purposes only and does not constitute a formal solicitation or a promise to issue a Request for Proposal. However, the anticipated future procurement is expected to be a firm fixed price contract, with a Request for Quote likely to be issued around January 2027. Interested respondents from all business sizes, including small and disadvantaged businesses, must submit a written Capability Statement by November 23, 2026. Submissions must include the vendor's CAGE code, business size status, and technical documentation such as Safety Data Sheets and Technical Data Sheets to verify the product's ability to meet the specified foaming and durability requirements.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

3 days ago

DEADLINE

in 19 days
View Details
NAICS: 333415
New
Federal
NSWCCD York Chill Pump Replacement
Solicitation # N0016727Q1002
The Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting quotes for the procurement, delivery, and turn-key installation of a replacement pump (Pump No. 1, Model YLAA0080SJ46X, Serial SEMM-609950) for York Chiller No. 1 located in Building 157. This equipment is critical for providing chilled-water cooling to the Building 13 Server Rooms. The project is a Firm-Fixed-Price award and is restricted to OEM certified Johnson Controls technicians due to the proprietary nature of the hardware and firmware. The scope of work includes the removal and disposal of the old pump, installation of the new unit, and ensuring proper operation without leaks. All work must be completed on or before December 18, 2026, at the Bethesda, Maryland facility. This procurement is open to full and open competition and is not set aside for small businesses. Award will be based on the Lowest Price Technically Acceptable (LPTA) method, with technical acceptability evaluated on a pass/fail basis. Interested vendors must submit quotes on official company letterhead, including all-inclusive pricing and business size, via email to the contract specialist and contracting officer. While the initial deadline was November 6, 2026, Amendment 0001 extended the response deadline to November 16, 2026, at 9:00 AM EDT. A pre-quote site visit is scheduled for November 10, 2026, and base access requests must be submitted by November 4, 2026. The contract requires compliance with MIL-STD-130 and MIL-STD-129 for item identification and marking, and payment will be processed through the Wide Area WorkFlow (WAWF) system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

7 days ago

DEADLINE

in 12 days
View Details
NAICS: 541330
Federal
Synthetic Signature Generation (SSG) Support Services
Solicitation # N0016726R1006
The Department of the Navy, Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting a single-award indefinite-delivery/indefinite-quantity (IDIQ) contract for scientific, engineering, and technical services to support Synthetic Signature Generation (SSG) based simulation systems. The scope includes the design, development, fabrication, integration, testing, fleet implementation, and maintenance of systems across five Navy fleet training categories: Submarine Team, Navigation, Surface, Surveillance, and On-Board. The contractor will operate within an Integrated Product Team (IPT) to provide technical engineering support to onsite maintenance personnel and support tactical testing and analysis for common simulation subsystems. The contract is structured with Cost-Plus-Fixed-Fee (CPFF) Level of Effort (LOE) CLINs and Cost Only Other Direct Costs (ODC) CLINs, with a total estimated labor requirement of 455,040 hours over a three-year period from August 10, 2027, to August 10, 2030. The procurement is a full-and-open competition evaluated on a best-value basis, prioritizing technical approach, management, and personnel over past performance and cost. Key requirements include a Top Secret facility clearance and Secret safeguarding for personnel, with specific Cyberspace Workforce (CWF) certifications aligned with DoDM 8570.01. Performance will be monitored via a Quality Assurance Surveillance Plan (QASP) using a rating scale from Exceptional to Unsatisfactory. Proposals must be submitted by November 9, 2026, and include detailed staffing plans and past performance narratives. The government has established a small business participation goal of 17 percent and requires the use of Wide Area Workflow (WAWF) for invoicing, with a 15 percent fixed fee withholding policy until a threshold of 100,000 dollars is reached.
Engineering Services

POSTED

8 days ago

DEADLINE

in 5 days
View Details
NAICS: 336611
Federal
Tailcone Studs
Solicitation # N0016727Q0001
The Naval Surface Warfare Center Carderock Division is seeking a small business contractor under NAICS code 336611 to manufacture and deliver 96 tailcone studs, organized as eight shipsets of 12 studs each. This firm fixed price contract requires the contractor to provide all labor, equipment, and materials to produce the hardware in accordance with specific technical drawings and ASME B1.3 System 21 thread acceptability standards. The contractor must maintain a quality system meeting ISO 9001:2015 or later and ensure all material certifications comply with DFARS specialty metals restrictions. Deliverables include the hardware, a digital final certification technical report, and certificates of conformance. The period of performance is three months from the date of award, with final delivery to West Bethesda, Maryland. Packaging requirements are stringent, requiring each shipset to be individually packaged with a hardcopy certification package and then consolidated into a single watertight, heavy-duty hard plastic container. Marking must adhere to MIL-STD-130 and MIL-STD-129, utilizing two-dimensional data matrix symbology for unique identification. Award will be granted to the responsible quoter with a technically acceptable quote deemed most advantageous based on price and past performance. The contract also mandates strict cybersecurity compliance, including CMMC requirements and the safeguarding of covered defense information.
Ship Building and Repairing

POSTED

9 days ago

DEADLINE

in about 14 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS