Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on September 21, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

23--Purchase of 7 Maintenance Trucks (7 Each) for the Directorate of Public Works, Oahu, HI.

Awarded
W912CN12R0052Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924
New
Federal
35K lb. Base Capacity 4-wheel Sit-Down AC Electric Lift Truck, including Options, Battery, Charger, and Freight
Solicitation # W911S227U0101
Solicitation W911S227U0101 is a total small business set-aside for the procurement of one new, heavy-capacity, four-wheel sit-down AC electric lift truck with a base capacity of 35,000 pounds. The equipment must be current production and is intended for indoor industrial material-handling operations at the McAlester Army Ammunition Plant in Oklahoma. Key technical requirements include a rated lifting capacity of at least 28,700 pounds at a 24-inch load center, a maximum fork height of 103.5 inches, and a 72-volt electrical system or better. The forklift must be delivered fully assembled and include a compatible battery, charger, and all necessary accessories. The contract is awarded on a fixed-price basis to the responsible offeror whose proposal is most advantageous to the government, evaluating both price and technical compliance. Delivery is required on an FOB Destination basis no later than September 30, 2027, with a preferred delivery window of 30 days. The award includes a minimum 12-month or 2,000-hour general warranty and a 36-month or 6,000-hour powertrain warranty. The successful contractor must also provide on-site operator orientation and furnish comprehensive electronic and hard-copy manuals. All quotes must be submitted via the PIEE Solicitation module and include a completed certification of country of origin.
W6QM Micc-Ft Drum

POSTED

about 23 hours ago

DEADLINE

in 9 days

AI Contract Overview

Show more

This contract is for the procurement of 11 maintenance trucks for the Directorate of Public Works in Oahu, Hawaii. The order consists of five service trucks with 40 to 45 foot multi-position bucket hoists, two service trucks with 60 to 65 foot aerial platforms, two 8 to 10 ton 6X6 dump trucks, and two specialized water and sewer trucks. Each vehicle category includes specific technical requirements, ranging from insulating aerial devices and high-capacity hydraulic systems to heavy-duty diesel engines and specialized debris tanks. Key deliverables include a variety of safety and operational accessories such as LED lighting systems, fire extinguishers, and specialized towing hitches. The contract also mandates comprehensive pre-delivery inspections and operator and maintenance training for all units. This solicitation is designated as a total small business set-aside under the Department of Defense.

General Info

Procurement of 11 specialized maintenance trucks for Oahu Public Works, small business set-aside.

Contract Value

$509,917

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

Place of Performance

RCO Hawaii (PARC Pacific, 413th CSB) Regional Contracting Office, Hawaii, ATTN: Bldg 692, McCornack Rd Schofield Barracks HI 9, HI, USA

Set-Aside

SBA

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

4 updates
PhaseAwarded
Posted

Presolicitation

Notice updated

Response deadline changed from Jul 23, 2012 to Sep 10, 2012. The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Deadline changed

Response deadline changed from Sep 10, 2012 to Sep 17, 2012.

Deadline changed

Response deadline changed from Sep 17, 2012 to Sep 18, 2012.

Type Changed

Presolicitation → Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → 0413 Aq Hq Rco-Hi
ContactsNo contacts available
OfficeFORT SHAFTER, HI, 96858-5025, USA
Office AddressFORT SHAFTER, HI, 96858-5025, USA
ContactsNo contact information available

Full Description

Show more
Purchase of 11 Maintenance Trucks (11 Each) for the Directorate of Public Works, Oahu, HI. A total of five (5) Service/Maintenance trucks with Multi-Position Bucket Hoist/Aerial Platform 40'-45'. Specifications listed below. 1. Ground to bottom of platform height: 37.8 feet 2. Working height: 42.8 feet 3. Maximum reach to edge of platform. Side Mounted Platform: 26.6 feet. End Mounted Platform: 28.3 feet (at 14.4 foot platform height). 4. Telescopic boom extension: 9 feet 8 inches 5. Continuous rotation 6. Insulating Aerial Device, ANSI Category C, 46kV and Below 7. Articulating Arm: Articulation is from -7 to 90 degrees. Insulator provides 12 inches of Isolation. 8. Compensation System: By raising the articulating arm only, the telescopic boom maintains its relative angle in relation to the ground. The work position is achieved through a single function operation. 9. Telescoping upper boom: Articulation is from -25 to 75 degrees. 10. Master/ Slave Leveling: Platform automatically maintains level during boom articulation through a lifetime master/slave hydraulic leveling system that requires no major preventive maintenance. 11. The INSULATING UPPER CONTROL SYSTEM includes a single handle controller incorporating high electrical resistance components that is dielectrically tested to 40 kV AC with no more than 400 microampers of leakage. The control handle is green in color to differentiate it from other non-tested controllers. 12. One set of tool outlets at the platform providing up to 5 gpm of flow for open center tools 13. Hydraulic System: Open center system operating at 5gpm and 2,400 psi. 14. Unit is painted with a powder coat paint process which provides a finish-painted surface that is highly resistant to chipping, scratching, abrasion and corrosion. 15. Structural Warranty all of the following applicable major components is to be warranted for so long as the initial purchaser owns the product: Booms, boom articulation links, hydraulic cylinder structures, outrigger weldments, pedestals, subbases and turntable 16. Poly Reservoir, Pedestal Mounted, 7 Gallon; Includes Sight Gauge. 17. Single, One (1) Man, Fiberglass Platform; End Mounted with 180 degree rotator. 24 x 30 x 42 inches, includes hydraulic tilt and two access steps located on the curbside of the platform. 18. Soft nylon reinforced vinyl Platform Cover for a 24 x 30 inch platform 19. Platform liner for a 24 x 30 x 42 inch platform 20. Platform Capacity, 400LBS 21. Patented ISO-Grip Insulating 4 Function, Proportional Speed, Upper Control Handle - With safety interlock and interlock guard. Forward/back operates upper boom in/out, tiller operates rotation CW/CCW, up/down operates upper boom up/down, and twist operates lower arm up/down. Platform leveling is controlled with a separate interlocked control. handle. 24. Engine Start/Stop: Control is captive air operated from the platform and toggle switch operated from the lower controls. 25. Manual lowering valve located at the boomtip. For use in emergency situations to allow the operator to lower the boom to the ground 27. Start/Stop 12VDC Module installed behind the driver's seat, inside the cab 28. Color white 29. HVI-22 Hydraulic Oil (Standard). Standard Pump for PTO, Hot shift PTO for automatic Transmission. Body Accessories. 1. Steel Tailshelf, 94'' Wide x 38'' Long with Wheel Chock Holders (1 Each Side), Add grab handle at rear of tailshelf for 3 pt. access. 2. Cable Step Installed At Rear, Single Step U-Shaped Grab Handle Installed At Rear Small Grab Handle Installed At Rear Combination 2 Ball (10,000 LB MGTW) And Pintle Hitch (16,000 LB MGTW) Set of Eye Bolts for Trailer Safety Chain, installed one each side of towing device mount. 3. Platform Rest, Rigid with Rubber Tube Boom Rest for a Telescopic Unit Wheel Chocks, Rubber with Metal Hairpin Style Handle, 9.75'' L X 7.75'' W X 5.00'' H (Pair) Mud Flaps Safety Harness & 6 FT Lanyard (Fits Medium to X-large) 4. 5 LB Fire Extinguisher with Light Duty Bracket, mounted in cab floorboard, centered, behind Seats. Triangular Reflector Kit Installed in Cab, behind bench seat in chassis cab 5. Front Torsion Bar Installed On Chassis, Rear Torsion Bar Installed On Chassis Appropriate Counterweight Added for Stability of Unit 6. Apply Non-Skid Paint to All Walking Surfaces and Front of Body, Apply to entire tailshelf (Top & sides), cargo area floor, compartment tops, and any open treadplate area. Also apply Black nonskid to front of body (facing chassis). Electrical Accessories: 1. One amber strobe light, post mounted on the Streetside front of the body, visible above the chassis cab, with brush guard and master switch and indicator light in cab. 2. Single tone back up alarm installed between the chassis frame rails at the rear of the chassis. To work in conjunction with chassis reverse drive system. 3. 6-Way Trailer Receptacle (Pin Type) Installed At Rear 4. PTO Indicator Light Installed In Cab Engine type: 6.7L V8 Power Stroke Diesel or Equal Transmission Type: 6R140 6-Speed Automatic Transmission with PTO Provision or Equal Air Conditioner installed Accessories: Two each front and back spotlights Quasi-sine wave inverter 2000 watts or equal 5. Predelivery inspection and operator training Total two (2) Service/Maintenance trucks with Multi-Position Bucket Hoist/Aerial Platform 60'-65'. Specifications listed below. 1. Fiberglass upper boom & lower boom insulator 2. Insulated aerial device 3. Continuous rotation 4. Articulating arm provides upper boom compensation 5. Hydraulic platform rotation and tilt 6. Full pressure open center hydraulic system 7. A-frame primary outriggers 8. Iso-grip control system or equal 9. 4-function single handle upper control 10. Outrigger motion alarm and outrigger interlocks 11. Back-up alarm 12. Powder coat painted prior to assembly 13. Two sets of hydraulic tool circuits at platform 14. Diagnostic pressure test quick disconnect couplings 15. Emergency stop valves at all upper and lower control stations 16. Lower boom lifting eye 17. Ground to bottom of platform 59ft 18. Working height 64 ft. 19. Boom sides reach 40 ft. 20. Platform capacity 600lbs 21. Fall protection system 22. Platform liner, Wheel Chock, outrigger pads 23. Material handling capacity 1,000 lb. 24. Automatic transmission 25. Diesel engine 26. A/C and heater in cab Option items: 1. Boom mounted behind cab 2. Arm system 3. Hydraulic extend Jib 4. 2-man Platform with 180 degree 5. Engine start/ stop from platform 6. Phase lifting jib attachment, and Jib adapter 7. Auxiliary outriggers 8. Manual throttle control 9. Platform cover 10. Tool circuit below rotation 11. Two each front and back spotlights 12. Quasi-sine wave inverter 2000 watts or equal 13. Predelivery inspection, operator training Total two (2) 8-10 Ton Dump Trucks, 6X6, 5-8 cubic yards 36K to 51K GVW,Peterbilt Model 348 (108" BBC) or Equivalent. Specifications listed below. Peterbilt Model 348 (108" BBC) or equivalent which includes: All aluminum cab and roof with Huck bolted fasteners Bulkhead style doors and door jambs Piano style door hinges with 3/8" diameter stainless steel pins Cowl mounted mirrors or Equal Aluminums wheels front and rear 46,000 lb. Air Trac rear suspension Tandem rear axles Aluminum fuel tanks, Aluminum battery box, aluminum air tanks Air and electrical mounting end of frame Front and Rear S -cam air brakes (drum) and Abs brake system, Air cushion driver seat A/C system Rear axle weight rating = 46,000lbs Front axle weight = 20,000lbs PACCAR PX-8 (or Cummins ISC)engine rated at 350HP@2200rpm/1000 ft-lb@1400rpm or Equal Allison 3000 RDS-P automatic transmission or Equal Dump body with swing double acting tail gate w/air option latches Electric operated tarp systems with side flips over dump body 45 ton Pintle hook with D rings with rear air brake controls in rear Predelivery inspection and operator training Total two (2) Service/Maintenance Water/Sewer Trucks. Specifications listed below. Centrifugal fan single stage air conveyance system- 15yard debris body capacity Mounted on 7500 6x4 chassis 350 hp automatic transmission Electric /hydraulic four way boom, color coded sealed electrical system Remote pendant control with 35' cord Vansco electronic package part# 019pstd of Equal Double acting dump hoist cylinder 2" y- strainer with 25' fill hose Handgun assy. w/35 X " hose with quick disconnects Ex-ten " steel cylindrical debris tank Flexible hose guide 3 nozzles with carbide inserts with nozzle rack / 1-30 and 1-30sand 1-30 sanitary 1-15 penetrator. Standard suction tube storage: Curbside below waist level 2 pipe, rear door 2 pipe; twist-lock camps 1" nozzle pipe Flat rear door w/Hydraulic locks and door power up, power down open/close feature. SS Microstrainer Prior to blower Debris Body Vacuum Relief System Debris Deflector Plate 48" dump Height 1000 Gallon Capacity 60" Dump Height (W/1300 & 1500 gallons water) Water sight Gauge RS/LS Liquid Float Level Indicator 4 Cylinder John Deere Tier III (J4fan units) Blower Airshift Controls in Cab 180 Degree Rotation Non Telescopic Boom , Front Loading 8" Suction Hose Boom Transport Cradle 80 GPM Variable Flow Water System 3" Y-Strainer @ Water Pump with 3" drain Valve Performance Package ( Hyd Variable Flow, dual PTO's Dual Hyd pumps Water Relief Valve 1" For Water pump Midship Handgun Coupling Side Mounted Water Pump 400' x 1" Sewer Hose 2500 PSI Hose Wind Guide (Dual Roller) Hose Footage Counter Front Side Of Hose Reel-Mechanical Hose Reel Manual hyd Extend/Retract Hose Reel Chain Cover (Full) Hydraulic Extending 15" Hose Reel (800' x 1" Capacity Tachometer/Chassis Engine W/ Hourmeter Tachometer & Hourmeter/Aux Eng Tachometer & Hourmeter/Blower Circuit Breakers Led Lights, Clearance, Backup Stop, Tail & Turn 1+1 Manual -Partial Manual and CD Version Tow Hooks, Front and Rear\ Electronic Back-up Alarm Module Paint Wet on Wet 8" Vacuum Pipe Package Emergency Flare Kit Fire Extinguisher 5Lbs DEBRIS TANK ACCESSORIES Debris Body Flush System 6" Butterfly / Rear door located 3:00 Position with fixed Basket Screen Internal Perforated Screen For Pump off Ports Only 6" Decant System With Air Operated Knife Valve-Forward Mounted W/ Screen Centrifugal Separator Rear Mounted (Plus Style) (3) Pipe folding Pipe Rack/Curbside WATER TANK ACCESSORIES Low Water Light And Alarm And Water Pump Flow Indicator-GPM 3" Y-Strainer in lieu of 2" at Water Tank Fill 1500 Gallon Water Capacity-Additional on 15yd Units /6x4 Chassis Required Will Have 60" Dump Height VACUUM SYSTEM ACCESSORIES Two Stage Fan W/John Deere Plus 6-Cylinder Engine And Fluid Coupler Level II Vac On The Go Driven Via Auxiliary Engine This utilizes hydraulic system from the auxiliary engine does not require an automatic transmission level II is for the cleaning of drying beds, Vacuuming leaves and debris along curbs. BOOM ACCESSORIES 8Ft. Hydraulic Telescope Boom With 180 Degree Rotation Joystick Control For Boom Function (1) - Front T300 Omnex Remote Control Belly Pack-Wired Or Wireless Capability. HIGH PRESSURE WATER PUMP 80 gpm/2500 PSI Water System - Std Water System Accumulator System For Jet Rodder Water System Front And Rear Handgun Couplers Hydro Excavation Kit/ Retractable Reel W/50' X 3/8" Hose Handgun & plumbing(must have options Accumulator on the machine Fan Flush out system HOSE REEL ACCESSORIES 600' x1" Piranha Armor Belt Beacon Sewer Hose Indexing - Automatic Hose level Wind Guide Digital Hose Counter Handgun Hose Reel- Spring Retractable reel with 50' Hose Assembly-Mounted curbside on top of toolbox or on cab guard vertical post Hydraulic shut-Off Valves At Suction , Return And Filter Line (3) Rodder Pump Drain Valves (2) Telescoping Rotating Hose Reel W/Dual Controls-capacity,800' X 1" Piranha or aero-quip, 700' x 1" piranha armor belt sewer hose, 700' x 1" piranha armor belt beacon sewer hose LIGHT ACCESSORIES L.E.D. Split Arrow traffic Controller-Two Piece 10 lights-Rear only -Led Hand Light With Retractable Reel FS Dot-3-6 Light System -FED Sig. Mirror Mount Strobes, 2 Mid -ship, 2 rear Water Tank Mounted Oval Quad Flash Strobes LED-Work Light/rear Door LED - Work Light At Operator Station (Each) LED- Work Light@ Hose Reel Manhole (Each) LED-work Light Curb Side LED- Work Light Street Side CHASSIS ACCESSORIES/ OPTIONS Safety Cone Storage Rack PREDELIVERY INSPECTION OPERATOR TRAINING AND MAINTENANCES TRAINING

More opportunities from Department Of Defense → 0413 Aq Hq Rco-Hi

Same awarding agency

NAICS: 561210
New
Federal
Preventive Maintenance and Repair Services - Kahuku Training Area (KTA)
Solicitation # W912CN-27-Q-A008
The Regional Contracting Office Hawaii is soliciting a firm-fixed-price requirements contract for preventive maintenance, inspection, testing, and repair services at the Kahuku Training Area on Oahu, Hawaii. The scope of work covers HVAC, fire alarm and mass notification, emergency lighting and exit signs, and lightning protection systems. The contract is structured with a base period from January 1, 2027, to December 31, 2027, followed by four 12-month option periods, with an additional six-month extension option under FAR 52.217-8. This procurement is a 100 percent Total Small Business Set-Aside under NAICS code 561210, specifically identifying Women-Owned Small Business and Economically Disadvantaged Women-Owned Small Business categories. Award will be based on best value, with price and technical capability weighted as approximately equal. Technical evaluation focuses on the qualifications of the Project Manager and the feasibility of the submission, both of which must be rated acceptable for the quoter to be eligible. While most services are priced in the quote, repair services under CLIN 0006 and its option-year counterparts are not priced upfront and will be handled via separate firm-fixed-price task orders. Quoters must maintain active SAM registration and submit their electronic quotations to the Contract Specialist by 10:00 a.m. HST on December 1, 2026. Performance requires adherence to OSHA standards, DoD cybersecurity training, and specific security protocols for installation access.
Facilities Support Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
US Army Hawaii Dining Facilities’ Large Equipment Preventative Maintenance & Repair Services
Solicitation # W912CN-27-Q-A009
The Regional Contracting Office Hawaii is soliciting a firm-fixed-price requirements contract for preventive maintenance, routine and emergency repairs, and general maintenance of large kitchen equipment at US Army Hawaii Dining Facilities. The scope of work covers installations on the islands of Oahu and the Big Island, specifically including the Pohakuloa Training Area. The contract is structured with one base year and four option years, with a total period of performance extending from December 15, 2026, through December 14, 2031. This acquisition is a 100% set-aside for small businesses, specifically targeting Women-Owned Small Businesses. Award will be based on the best value using a comparative evaluation method. The government will assess technical capability, the qualifications of key personnel—requiring a Project Manager and Alternate Project Manager with five years of relevant experience—and total evaluated price. To be considered acceptable, quoters must provide a technical capability narrative, required resumes, and a fixed hourly repair labor rate compliant with Service Contract Labor Standards. All quotes, including signed SF 1449 and SF 30 forms and required technical documentation, must be submitted electronically to the contract specialist by November 30, 2026, at 10:00 AM HST.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

3 days ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS