This Solicitation opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

60 FSS Reach-In Warmer & Cooler, Travis AFB, CA

Closed

FA442726Q0021Federal

Submission Closed09/08/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333415

New

ACT-1398 CRAC units, Sensors & Stands x5 - WJHTC NJ

Solicitation # act-1398-crac-units-sensors-stands-x5-wjhtc-nj

PTSI Managed Services Inc. (Parsons) is soliciting bids for the purchase of five Leibert Computer Room Air Conditioning (CRAC) units, including associated sensors and stands. This procurement is designated for performance in New Jersey under NAICS code 333415. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by October 21, 2026. Sarah Vaughan serves as the primary point of contact for this solicitation.

PTSI MANAGED SERVICES INC. (PARSONS)

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0174

Solicitation SPE7M0-27-T-0174 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one duct type air cooling coil, identified by NSN 4130011916138 and part number 19-80-3397M from Edge Electronics Corporation. The required delivery date is October 1, 2026, with a delivery timeline of five days after order. The item is to be shipped FOB Origin to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, and the contractor must comply with the Berry Amendment and the Buy American Act. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and submission of quotes through the DIBBS portal. The solicitation also incorporates various FAR and DFARS clauses regarding equal opportunity, hazardous material identification, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

HEATER, DUCT TYPE, ST

Solicitation # SPE8E8-26-T-5797

Solicitation SPE8E8-26-T-5797 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment for one stationary duct-type heater. The required item is identified by NSN 4520-01-371-8081 and part number 106-302307-021 from Chromalox Inc. Delivery is required within 20 days after order to the USNS WATERS T AGS 45, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special environmental and safety restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0178

Solicitation SPE7M0-27-T-0178 is issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one duct type air cooling coil, identified by NSN 4130011916131 and part number 19-80-2979M. The requirement is classified under NAICS code 333415 and is set aside for small businesses, with a specific price evaluation preference for HUBZone concerns. The original required delivery date is October 1, 2026, with a delivery window of five days after receipt of order. Delivery is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the Puget Sound Naval Shipyard IMF in Bremerton, Washington. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking standards according to MIL-STD-2073-1E and MIL-STD-129. Special restrictions are in place regarding the use of mercury and the removal of government identification from non-accepted supplies. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and submission of all quotes via the DLA Internet Bid Board System by October 19, 2026. Key regulatory clauses apply, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

FILTER ELEMENT, AIR CON

Solicitation # SPE8E8-26-T-5549

Solicitation SPE8E8-26-T-5549 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one air conditioning filter element, identified by NSN 4130-01-696-2270. The requirement is categorized under NAICS code 333415 and specifies a delivery lead time of five days, with an original required delivery date of September 4, 2026. Delivery is set as FOB Destination, with shipping addresses provided for both a parcel post location in the United States and a freight destination in Japan. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Palletization must follow RP001 requirements. Administratively, the contractor must use Wide Area WorkFlow for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Offerors must provide their CAGE code and Unique Entity Identifier and represent their small business status and compliance regarding covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0185

Solicitation SPE7M0-27-T-0185 is a request for quotation issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the procurement of one duct type air cooling coil, identified by NSN 4130-01-257-9076. The requirement references part number 19-80-2612M1 from Edge Electronics Corporation and Electric Boat Corporation. Delivery is required within five days after order to the Puget Sound Naval Shipyard in Bremerton, Washington, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically requiring the avoidance of plastics for wrapping and dunnage where possible. Technical and quality requirements are governed by the DLA Master List, though it is noted that no approved Technical Data Package is currently available for this NSN. Material restrictions prohibit the intentional addition of mercury and the use of additive manufacturing processes unless specifically authorized. Compliance with the Buy American Act, Berry Amendment, and various cybersecurity standards, including NIST SP 800-171 and DFARS 252.204-7012, is required. Payment processing must be conducted electronically via Wide Area Workflow.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4107

Solicitation SPE8E8-26-T-4107 is a fixed-price request for a single air filter element, identified by NSN 4130-01-696-2270, for the Defense Logistics Agency. The item is to be delivered FOB Destination to the USS George H W Bush CVN 77 in Norfolk, Virginia, with an original required delivery date of June 9, 2026, and a delivery window of five days after receipt of order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically incorporating RP001 for packaging and palletization, RQ011 for the removal of government identification from non-accepted supplies, and RC001 for source approval documentation. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA requirements taking precedence. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The agreement incorporates various FAR and DFARS clauses covering cybersecurity, safeguarding of defense information, and domestic sourcing restrictions, including the Buy American Act and Berry Amendment.

Defense Logistics Agency

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0177

Solicitation SPE7M0-27-T-0177 is a fixed-price request for quotation issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one duct type air cooling coil, identified by NSN 4130-01-191-6128 and part number 19-80-3013M. The requirement specifies a delivery timeline of five days after order, with an original required delivery date of October 1, 2026. Delivery is FOB Origin, with the final destination for inspection and acceptance being the Puget Sound Naval Shipyard IMF in Bremerton, Washington. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 19, 2026. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including a prohibition on the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative compliance includes the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment requests. Additionally, the award is subject to various federal regulations, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0176

Solicitation SPE7M0-27-T-0176 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one duct type air cooling coil, identified by NSN 4130-01-191-6145 and part number 19-80-2983M. The required delivery date is October 1, 2026, with a delivery timeframe of five days after order. The item is to be shipped via the fastest traceable means to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, alongside DLA packaging requirements RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the contractor must ensure no mercury is intentionally added to the hardware. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE3SE-27-Q-5006

Solicitation SPE3SE-27-Q-5006 is a Simplified Indefinite-Delivery Contract for the procurement of one countertop icemaker-dispenser, part number IMD-600-30AS, for Navy shipboard use. The unit must be NSU approved by NAVSEA/NSWCCD and meet specific technical requirements, including dimensions of 18-5/8 inches wide by 35-3/4 inches high by 27-1/2 inches deep, 6-inch stainless steel legs, and a keylock dispense switch. It must utilize R404A or R134A refrigerants, as R290A is prohibited for naval vessel food service applications. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. The contract is a firm-fixed-price agreement with delivery required within 30 days after receipt of order. Shipping, inspection, and acceptance are all set to destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001, with unique item identification following MIL-STD-130. Payment and receiving reports must be processed through the Wide Area WorkFlow system. The award will be granted to the responsible offeror deemed most advantageous to the government, considering price and other factors, including compliance with the Buy American and Balance of Payments Program.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0179

Solicitation SPE7M0-27-T-0179 is a federal procurement issued by the Defense Logistics Agency for one duct type air cooling coil, identified by NSN 4130011916125 and part number 19-80-2978M. The requirement is for a single unit to be delivered FOB Origin to the Puget Sound Naval Shipyard in Bremerton, Washington, with an original required delivery date of October 1, 2026, and a delivery window of 5 days after receipt of order. The award process is automated and requires quotes to be submitted via the DIBBS portal. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and specifies packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with RP001 requirements. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, and any hazardous materials must be labeled according to the Hazard Communication Standard. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # N0010423QJA97

Solicitation N00104-23-Q-JA97 is a firm-fixed-price request for quotation issued by NAVSUP Weapon Systems Support MECH for the manufacture and delivery of one Air Cooler Unit, identified by NSN 4130-99-555-2016 and Part 50250-04 under Cage Code 4DSJ9. The procurement requires strict adherence to quality and technical standards, including physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073. Government source inspection is mandatory, and all freight is handled as FOB Origin. Delivery is expected within 180 days, with primary shipping directed to the DLA Distribution New Cumberland facility in Pennsylvania. The award will be made to a single responsible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Offerors must be authorized distributors of the original equipment manufacturer and provide official verification of this status. Compliance with various federal regulations is required, including Buy American and Trade Agreements, NIST SP800-171 cybersecurity standards, and hazardous material identification per FAR 52.223-3. Invoicing and payment must be processed electronically through the Wide Area Workflow system. The final deadline for the submission of quotes is October 23, 2026, with Sophie Benson serving as the cognizant Contract Specialist.

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 3 days

AI Contract Overview

Solicitation FA442726Q0021 is a total small business set-aside for the 60 FSS at Travis Air Force Base, California. The project requires the removal and disposal of existing Traulsen warmers and coolers and the installation of two new two-door reach-through warmers and two new two-door Traulsen coolers within the Monarch dining facility kitchen. The contractor must provide all labor, materials, and specialized equipment necessary for the installation and disposal. All provided equipment must be new, as refurbished units are not acceptable. Technical specifications require the units to be two-door front and back with half-height solid doors, measuring 29 7/8 inches wide, 83 1/4 inches high, and 37 15/16 inches deep, operating on 60 Hz, 1 Phase electrical power. A standard one-year limited parts and labor warranty is required. The contract will be awarded based on best value, evaluating a fair and reasonable price and a pass/fail technical capability assessment. Offerors must submit a quote, a completed Contractor Responsibility Verification form with financial supporting documentation, and adhere to strict base access security requirements, including identity proofing and vetting for the closed installation. The response deadline is September 8, 2026, at 12:00 PM PST. Invoicing and payment will be processed through the Wide Area WorkFlow system. All delivered items with a unit acquisition cost of 5,000 dollars or more must include unique item identifiers in accordance with MIL-STD-130 and MIL-STD-129 standards.

General Info

Contract for replacing kitchen equipment at Travis AFB, due September 4, 2026.

Agency

Department Of Defense → FA4427 60 Cons Lgc

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

Place of Performance

0, CA, 94535, USA

Set-Aside

SBA

Documents

60 FSS Reach-In Warmer/Cooler SOW - 9 Jul 2026

2 pages · sow

High

FA442726C00210001 Amendment 0001

3 pages · amendment

High

FA442726C00210001 Amendment 1

amendment

High

FA442726C00210002 Amendment 0002

3 pages · amendment

High

FA442726C0021 60 FSS Reach-In Warmer & Cooler

solicitation

High

FA442726C0021 60 FSS Reach-In Warmer & Cooler

solicitation

High

FA442726Q0021 Attachment 4 Q&A and Salient Specs

5 pages · amendment

High

TAFB Security Requirements

6 pages · sow

High

Contractor Responsibility Verification (FAR 9.103/9.104)

2 pages · responsibility-verification

Medium

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedAug 26

Solicitation

Notice updatedAug 31

The notice description changed.

Notice updatedSep 2

Response deadline changed from Sep 4, 2026 to Sep 8, 2026. The notice description changed. The point of contact changed.

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4427 60 Cons Lgc

Contacts2 people available

OfficeTRAVIS AFB, CA, 94535-2632, USA

Organization / AgencyDepartment Of Defense → FA4427 60 Cons Lgc

Office AddressTRAVIS AFB, CA, 94535-2632, USA

Contacts

Glody Tukeba

Rachel Gil

Full Description

The 60 FSS on Travis AFB, CA has a requirement for a 2-two-door reach through warmers and 2 two-door Traulsen coolers. (brand name or equal). The requirement is to remove and dispose of the existing Traulsen warmers/coolers and installation of the new commercial grade Traulsen warmers/coolers in the Monarch dining facility kitchen. The Contractor must provide all labor, materials, and specialized equipment as necessary to perform the work described herein as well as disposal of the removed items.

See Statement of Work for full requirement details.

This is a Total Small Business Set-Aside. Please see attached documents for more information. ________________________________________________________________

IMPORTANT DATES / POINTS OF CONTACT:.

This RFQ will end on 08 September 2026 at 12:00 PM PT.

The points of contact for this RFQ are SSgt Glody Tukeba at glody.tukeba@us.af.mil and Ms. Rachel Gil rachel.gil.1@us.af.mil

________________________________________________________________

List of attachments:

Solicitation - FA442726Q0021

1. 60 FSS Reach-In Warmer & Cooler Statement of Work

2. Contractor Responsibility Verification

3. TAFB Security Requirements September 2024

4. Q&A's

________________________________________________________________

Important note to Offerors:

Offerors shall provide a statement from their financial institution or responsible official confirming the offeror has sufficient resources to fulfill the required effort. See the Contractor Responsibility Verification attachment for more information.

• Please email POC listed for this requirement when submitting questions or quotes.

-------------------------------------------------------------------------------------------------------

Solicitation Amendment 01 | 31 August 2026

Notice to All Offerors:
All questions regarding this solicitation must be submitted via email to the designated Points of Contact no later than tomorrow, 01 September 2026 at 12:30 PM PST. A consolidated Questions & Answers document (Attachment 4 - Q&A) will be posted by close of business on the same day for all prospective offerors to review.

Any inquiries received after this deadline will not be accepted.

All other terms and conditions remain unchanged.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Amendment 02 | 02 September 2026

Notice to All Offerors:

Please see added (Attachment 4 - Q&A Document). Be advised, any inquiries received after this deadline will not be accepted.

Additionally, please send your responses to SSgt Glody Tukeba and Ms. Rachel Gil.

*New RFQ Due Date: 08 September 1200 Noon PST