Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Veterans Affairs was posted on April 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

6515--XR2 & Robotic Resident Expert | Base & Three Options

Awarded
36C24926Q0171Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333914
New
Federal
PUMP,RECIPROCATING
Solicitation # SPRPA126QYD35
Solicitation SPRPA126QYD35, issued by DLA Aviation at Philadelphia, is a small business set-aside for the procurement of newly manufactured reciprocating pumps. This item is designated as critical material because it is used in shipboard systems for aircraft launch and recovery, where failure could lead to serious injury or loss of life. Consequently, the government requires that all supplies be newly manufactured, as refurbished or repaired materials are ineligible for award. Offerors must be government-approved sources of supply, and distributors must provide an authorized distributor letter on the source's letterhead at the time of proposal submission. The contract is a fixed-price agreement requiring adherence to AS/EN/JISQ 9100 quality standards and NAWCAD Lakehurst drawing 80020 / 653D326-1. Delivery is required within 90 days, with inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129 marking requirements. Award will be made to a single responsible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important. Evaluation will include risk assessments via the Supplier Performance Risk System regarding item, price, and supplier risk. Invoicing and receiving reports must be processed through Wide Area Workflow.
Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

in 6 days
NAICS: 333914
New
Federal
4320--Condensate Receiver
Solicitation # 36C24227Q0088
The Department of Veterans Affairs, Network Contracting Office 2, is issuing this Request for Information to identify qualified sources for the purchase of one Domestic Model 52CB45-15 Duplex Condensate Unit for the Buffalo VA Medical Center. This procurement is for equipment purchase only and is intended to replace an aging receiver with a functionally identical unit to ensure compatibility with existing piping and controls without requiring modifications. The required unit must feature a 45,000 Sqft EDR capacity, a 3/4 horsepower motor at 3500 RPM, a 1-1/2 inch discharge size, and an operating pressure rating of at least 15 psig. The equipment is considered critical for the life and safety of laboratory animals and must include a minimum twenty-year manufacturer warranty, with a requirement for the contractor to be on-site for warranty work within 24 hours of contact. This notice is for planning purposes and does not constitute a formal solicitation or commitment to award. Interested respondents must be registered in SAM with a Unique Entity ID and the appropriate NAICS code 333914. The government is specifically seeking domestic sources and requires a capability statement, confirmation of manufacturer or authorized distributor status, and details regarding any existing GSA or GWAC schedule contracts. Delivery is expected within 30 calendar days of a purchase order to the Buffalo VA Medical Center, and the contractor must provide dimensional drawings, O&M manuals, and pump curves for acceptance. Responses are due via email to the contract specialist by 12:00 PM EST on November 1, 2026.
242-NETWORK Contract Office 02 (36C242)

POSTED

about 12 hours ago

DEADLINE

in 5 days

General Info

Contract Value

$2,731,512.24

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

TN

Set-Aside

NONE

Award Issued Date

Documents

1

Notice of Intent to Award Sole Source Contract 36C24926Q0171

DOCX, Low priorityspecial-notice
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

special-notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 249-NETWORK Contract Office 9 (36C249)
Contacts1 person available
OfficeMURFREESBORO, TN, 37129, USA
Office AddressMURFREESBORO, TN, 37129, USA
Contacts
John E. McDanielContract Specialist

Full Description

Show more
NOTICE OF INTENT TO AWARD SOLE SOURCE 36C24926Q0171 serves as a Notice of Intent to Award a Sole Source Contract and is not a request for competitive quotes. The Department of Veterans Affairs (VA), Network Contracting Office 9 (NCO 9), intends to award a sole source contract to the Original Equipment Manufacturer (OEM), Omnicell, Inc., 500 Cranberry Woods Dr., Cranberry Township, PA 16066-5224, for the procurement of an XR2 and Robotic Resident Expert. The Government requires an XR2 automated medication dispensing and packaging system, including associated Robotic Resident Expert support services. The XR2 is a high volume robotic unit that automates storage, filling, packaging, labeling, and dispensing of prescription medications. The Robotic Resident Expert provides system support, optimization, and workflow integration required for continuous packaging operations. The VA anticipates awarding a firm-fixed-price contract with the equipment, installation, and warranty on the base year and three option years covering Central Pharmacy Dispensing Service Solution Fees and Resident Robotic Expert Service Fees. The applicable North American Industry Classification System (NAICS) code for this requirement is 333914, Measuring, Dispensing, and Other Pumping Equipment Manufacturing, with a size standard of 750 employees. The Product Service Code (PSC) is 6515, Medical and Surgical Instruments, Equipment, and Supplies. This notice does not constitute a solicitation. However, any interested party that believes it can meet the requirements may submit a written statement of capabilities. The capability statement must clearly demonstrate that competition would be advantageous to the Government. All costs associated with preparing and submitting a response to this notice are solely the respondent s responsibility and will not be reimbursed by the Government. Responses received will be reviewed; however, the Government retains sole discretion in determining whether to compete this requirement. If no responses are received, the Government will proceed with the intended sole source award. Capability statements must be submitted no later than 12:00 PM CST on 30 April 2026. Submissions must be sent by email only, as a Microsoft Word or Adobe PDF attachment, to: contact@example.gov

More opportunities from Department Of Veterans Affairs → 249-NETWORK Contract Office 9 (36C249)

Same awarding agency

NAICS: 238220
New
Federal
TVHS AC VRF System Installation
Solicitation # 36C24927Q0016
The Department of Veterans Affairs, Tennessee Valley Healthcare System Nashville Campus, is soliciting quotes for a single-award, firm-fixed price purchase order to remove existing condensers and three air handling units and install a new Variable Refrigerant Flow (VRF) system across five office spaces near the boiler office. This requirement is a 100 percent set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The project involves providing all necessary personnel, equipment, and materials to ensure a fully commissioned system with verified airflow and temperature control. Key technical specifications include a requirement for 9,000 BTU cooling capacity for specific units and a standalone system configuration without BAS integration. To minimize disruption, intrusive activities are restricted to a window from Friday evening to Sunday noon. The period of performance is scheduled from November 12, 2026, through February 28, 2027. Award will be based on a comparative evaluation of best value, considering price, technical capability, and past performance. The selected contractor must comply with OSHA Standard 29 CFR 1910 and NFPA 70E safety standards and provide detailed documentation, including field reports on the day of inspection and a final written report within ten working days of completion. Invoices must be submitted electronically via the VA's Electronic Invoice Presentment and Payment System (IPP). All offers must be submitted by October 28, 2026, and include a completed SF 1449, pricing for the job, and verification of SDVOSB status via the SBA Small Business Search.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

1 day ago

DEADLINE

in about 17 hours
View Details
NAICS: 541380
New
Federal
Q301--Media Fill Testing for Clean Room Compliance - Pharmacy Base 4 years
Solicitation # 36C24927Q0020
The Department of Veterans Affairs, through Network Contracting Office 9, is soliciting a contract for laboratory services to support the Louisville VAMC Pharmacy Service. The scope of work involves monthly microbial contamination surface sampling of classified areas and pass-through chambers, as well as initial and semi-annual aseptic technique competency testing for personnel, including gloved fingertip and thumb sampling and media-fill testing. All services must be performed in accordance with USP Chapters 797 and 800, VHA Directive 1108.12, and CETA/CNBT standards, with results delivered to the Chief of Pharmacy Service within two weeks of testing. This is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The contract structure consists of a 12-month base period running from December 1, 2026, to November 30, 2027, with four subsequent 12-month option years extending through November 30, 2031. Award will be based on the most advantageous offer, considering price and other factors, with the total price of all options evaluated alongside the base requirement. Contractors must provide NIST-traceable calibration documentation, standard operating procedures, and a comprehensive safety plan. Payment is governed by the Prompt Payment Act, and the government maintains the right to require reperformance of nonconforming services at no additional cost.
Testing Laboratories and Services

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333120
New
Federal
J061--Thompson Power Generator Service RFI Intent to Sole Source
Solicitation # 36C24927Q0025
The Department of Veterans Affairs intends to award a sole-source, firm-fixed price contract to Thompson Machinery Commerce Corporation for recurring full-service maintenance and rebuilds of the Caterpillar G3520C generator set and associated radiator system at the Alvin C. York Campus. This procurement, conducted under FAR 12.102-1(b) and NAICS code 333120, is justified by the proprietary nature of Caterpillar engine control software and the fact that Thompson Machinery is the only factory-authorized source for sales, service, and parts in the designated region. The contract is designed to ensure the continuous operation of the natural gas-fueled engine, which provides primary electrical power and steam to the facility. The scope of work requires manufacturer-certified technicians to perform maintenance according to service manual SEBU7681-16, including battery replacements every 24 months, radiator cleaning and fluid inspections every 1,000 hours, and comprehensive coolant and hose replacements every five years. Major deliverables include a standard top end overhaul every 18,000 service hours and a full out-of-frame overhaul during the fifth year of the contract. The estimated period of performance spans five ordering periods from December 1, 2026, through November 30, 2031. While this is an intent to sole source, the government will evaluate any interested parties who submit capability statements by October 30, 2026, to determine if the requirement should be competed.
Construction Machinery Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS