Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

66--R10 RO: Toxic Vapor Analyzers

Active
68HE0726Q0038Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Environmental Protection Agency’s Region 7 Contracting Office is issuing a pre-solicitation notice for the procurement of Toxic Vapor Analyzers under solicitation number 68HE0726Q0038, with the NAICS code 334516. This notice is for informational purposes only and does not invite quotes or proposals; however, it provides advance awareness of an upcoming acquisition to ensure industry readiness. The requirement specifies the purchase of TVAs that must conform to detailed technical specifications outlined in the accompanying documentation, with the ultimate goal of equipping personnel for environmental monitoring and hazard response. The place of performance for this contract is Seattle, Washington, with delivery expected to support operational needs in that region. The pre-solicitation was posted on July 31, 2026, and the response deadline for any inquiries or feedback is August 14, 2026, at 6:00 p.m. Eastern Time. Primary point of contact for this effort is Brianna Biggs of the EPA, reachable via email at biggs.brianna@epa.gov or by phone at 913-551-7549. The contracting office is located in Lenexa, Kansas, and the acquisition is not reserved for any specific small business set-aside category. Contractors and vendors are encouraged to review all attached specifications carefully and prepare for the subsequent formal solicitation, though no submissions are to be made at this stage. Additional details and documentation can be accessed through the provided SAM.gov link.

General Info

EPA Region 7 seeks market interest for two toxic vapor analyzers in Seattle by July 28, 2026, no contract award planned.

Agency

Environmental Protection Agency → Region 7 Contracting OfficeView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

1620 South 92nd Place, Seattle, WA, 98108, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyEnvironmental Protection Agency → Region 7 Contracting Office
Contacts1 person available
OfficeLENEXA, KS, 66219, USA
Organization / Agency
Environmental Protection Agency → Region 7 Contracting Office
View Agency Profile
Office AddressLENEXA, KS, 66219, USA

Full Description

Show more
This is a pre-solicitation notice. Please do not submit quotes. The purpose of this procurement is to purchase Toxic Vapor Analyzers (TVAs) in accordance with the attached Specifications.

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
Federal
6640--BRAND NAME OR EQUAL: 5-Year IDIQ - Disposable Individually Ventilated Caging System and Accessories for Rodents - Minneapolis VA Health Care System
Solicitation # 36C26326R0068
The Minneapolis VA Health Care System is soliciting a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract for a BRAND NAME OR EQUAL Disposable Individually Ventilated Caging System and Accessories for Rodents under the NAICS code 334516, with a small business size standard of 1,000 employees. This is an unrestricted, full and open competition issued as a Request for Quotation (RFQ) under FAR Subpart 12.202, treating the items as commercial products with streamlined acquisition procedures. The contract will be awarded under a Lowest Price Technically Acceptable (LPTA) process, where technical acceptability is determined first on a pass/fail basis, and the lowest-priced technically acceptable offer will be selected. Technical requirements include supplying four permanent racks for mice and two for rats, each with specified cage capacity and compatible supporting equipment such as blowers and filters, all designed to fit standard doorways without disassembly. Acceptable proposals must include proof of authorized distributor status, a narrative demonstrating substantive equivalence for “equal” items, a minimum one-year warranty, completed Trade Agreements Certificate, and active SAM registration, along with up to three relevant past performance references. The delivery location is Building 49 at One Veterans Drive, Minneapolis, MN 55417, with F.O.B. Destination terms, meaning risk transfers upon delivery. Performance is scheduled to begin August 12, 2026, and conclude by September 30, 2026, for initial deliveries, with the IDIQ structure allowing for multiple delivery orders over a five-year ordering period up to a ceiling of $1,000,000. Proposals must be submitted electronically by August 6, 2026, at 5:00 PM via email to Alisha Milander at Alisha.Milander@va.gov with the solicitation number in the subject line, and must be organized into two volumes: one for pricing using completed SF-1449 and Price Schedule, and one for technical compliance with supporting documentation. No attachments are listed separately, and packaging, marking, or MIL-STD requirements are not specified, consistent with commercial item acquisition flexibility. Contract administration is managed by Network Contracting Office 23 in Saint Paul, MN, with payments required to be made via Electronic Funds Transfer through SAM. Specific clauses include deviations for indefinite quantity, ordering, security prohibitions, DE
Network Contract Office 23 (36C263)

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334516
New
Federal
Metrology-grade Chilled Mirror Dew Point Hygrometers
Solicitation # 1333ND26QNB680396
The Department of Commerce, National Institute of Standards and Technology, is soliciting proposals for metrology-grade chilled mirror dew point hygrometers under solicitation number 1333ND26QNB680396. This combined procurement requires highly accurate instruments capable of measuring dew point with traceability to national standards, intended for use in calibration, research, and precision environmental monitoring applications. Proposals must demonstrate technical compliance with metrology-grade specifications, including performance benchmarks, traceability documentation, and calibration protocols aligned with NIST requirements. The contract will be awarded to a vendor capable of delivering equipment that ensures long-term stability, minimal drift, and rigorous repeatability under controlled laboratory conditions. The solicitation was posted on July 31, 2026, with a response deadline of August 11, 2026, at 3:00 PM Eastern Time. All responses must be submitted through the SAM.gov portal, and performance is expected to occur at the NIST facility in Gaithersburg, Maryland, 20899. The North American Industry Classification System code is 334516, indicating instruments and laboratory equipment manufacturing. The sole point of contact for inquiries is Forest Crumpler, reachable via email at forest.crumpler@nist.gov. There is no set-aside designation for this solicitation, meaning it is open to all eligible vendors regardless of business size or ownership status.
Department Of Commerce Nist

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334516
New
Federal
Parachutist Oxygen Delivery System (PODS) Prototype
Solicitation # W91CRB-Parachutist-Oxygen-Delivery-System-(PODS)-Prototype
The Parachutist Oxygen Delivery System (PODS) Prototype solicitation is an Other Transaction Authority (OTA) presolicitation under 10 U.S.C. §4022, aimed at securing innovative prototype solutions from Non-Traditional Defense Contractors or small businesses for use by U.S. military parachutists. The system must deliver reliable, life-sustaining oxygen during descent and pre-breathing phases under extreme environmental conditions, including temperatures from -65°F to 140°F, 100% non-condensing humidity, and sand/dust exposure, while meeting strict performance thresholds such as 40 liters per minute pre-breath flow and 45-minute descent capability using a 400L integrated oxygen system. Vendors are required to submit white papers of no more than three pages detailing technological approach, Work Breakdown Structure, TRL level (minimum TRL 6), anticipated cost, and past performance, with formal proposals due by close of business August 3, 2026, via email to designated Army personnel. The project will progress through Developmental Testing (DT) and Operational Testing (OT) phases at Yuma Test Center and Fort Bragg, leading to a Production Readiness Review and full lifecycle sustainment planning, with key deliverables including 6 units for DT and up to 15 for OT, along with maintenance, logistics, quality, and technical manuals. No standard FAR or DFARS clauses apply due to OTA authority, but compliance with the Berry Amendment, Buy American Act, DOT/FAA transport regulations, and MIL-STD-810H environmental testing is mandatory. The award will be based on best value using a trade-off approach, prioritizing technical innovation, feasibility, and life cycle affordability over lowest price, with no formal pricing data requested at this stage—costs will be submitted only upon invitation to the full proposal phase. Offerors must confirm their size status under statutory pathways, including potential non-federal funding contribution, and certify NTDC status if applicable, while ensuring all proprietary information is clearly marked and no government classification markings are used. Performance is to occur primarily in Natick, Massachusetts, with testing and training conducted at multiple military sites, and all logistics deliverables must support military packaging, marking, and preservation standards without explicit details being provided.
W6QK Acc-Apg

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
USAFSAM/OEA Inductively Coupled Plasma Mass Spectrometer (ICP-MS)
Solicitation # IASS-AFRL-RMZB-2026-0041
The United States Air Force School of Aerospace Medicine requires two Inductively Coupled Plasma Mass Spectrometers (ICP-MS) for use at Wright-Patterson Air Force Base in Ohio, with the Air Force Research Laboratory intending to award a sole source purchase order to Agilent Technologies, Inc. under the NAICS code 334516. The sole source justification is based on Agilent being the original equipment manufacturer and the exclusive developer of the required MassHunter software, making it the only vendor capable of fulfilling the technical specifications outlined in the Minimum Requirements Document dated 29 July 2026. This action is authorized under RFO 12.102(a), and while no competitive bidding is currently planned, the government is soliciting capability statements, quotations, or exceptions from other responsible sources to determine whether competition is feasible. All submissions must be emailed to Jason Sav at jason.sav@us.af.mil no later than Friday, 15 August 2026 at 5:00 PM Eastern Time, with the subject line precisely formatted as “Notice of Intent to Award SS – Inductively Coupled Plasma Mass Spectrometer (ICP-MS)”. Attachments must be in .PDF, .doc, .docx, .xls, or .xlsx format only; .zip or .exe files will be filtered out and deleted. Failure to follow these instructions may result in submission non-receipt.
FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334516
New
Federal
Frequency Comb System
Solicitation # NB6720202601682
The U.S. Department of Commerce, National Institute of Standards and Technology (NIST), is seeking market information through a Sources Sought notice to evaluate industry capabilities for providing a Frequency Comb System at its Boulder, Colorado facility. The system must lock four lasers at wavelengths of 776 nm, 780 nm, 960 nm, and 1260 nm and include all necessary components such as a 1560 nm optical frequency comb with at least six output ports, a frequency extension base module, four wavelength-specific extension channels, four laser locking modules, an enclosure and control unit, a frequency counter, and supporting electronics. Delivery, installation, and training must occur within seven months of order receipt, with on-site performance required at the NIST Boulder site. Vendors must be prepared to provide training for two NIST personnel in operation, maintenance, and troubleshooting, and supply a 12-month parts-only warranty. The requirement is classified under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing, and respondents must verify their size status under the 1,500-employee small business threshold. Responses are due by June 15, 2026, and must be submitted in Word or PDF format, not exceeding ten pages excluding the cover page and pricing information, to lia.arthofer@nist.gov. No proprietary, classified, or sensitive information may be included. Respondents must provide a cover page with their Unique Entity ID, company details, and SAM.gov registration status, and indicate whether they are a small business capable of complying with FAR clause 52.219-14, Limitations on Subcontracting. Any existing GSA Multiple Award Schedule or other federal contract must be disclosed with full documentation. NIST is actively soliciting input on potential evaluation factors and standard commercial pricing to inform future acquisition strategy, but this notice does not constitute a solicitation or commitment to award. Technical specifications are outlined in a draft document, and vendors may offer suggestions to improve clarity and competitiveness. On-site access is restricted to U.S. citizens unless pre-registered 30 days in advance, with foreign national presence limited to three consecutive days without additional coordination. Vendor technicians must be present for installation, and software deliverables must be sent to a designated NIST email. Export control compliance with ECCN and EAR/ITAR is required, and all vendors must maintain active SAM.gov registration. Responses received after the deadline may not be considered,
Department Of Commerce Nist

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Environmental Protection Agency → Region 7 Contracting Office

Same awarding agency

NAICS: 334516
New
Federal
66--Air VOA Summa Can Cleaner for the STC Air VOA Lab
Solicitation # 68HE0726Q0034
The Environmental Protection Agency’s Region 7 Contracting Office is seeking information from potential vendors for the supply of an Air VOA Summa Can Cleaner to support the STC Air VOA Lab located in Kansas City, Kansas. This sources-sought notice, issued under solicitation number 68HE0726Q0034, was posted on July 29, 2026, with responses due by August 4, 2026, at 1:00 PM Eastern Time. The acquisition is classified under NAICS code 334516, which pertains to laboratory analytical instrument manufacturing, indicating the specialized nature of the required equipment. The contract is not set aside for any specific small business categories, and the place of performance is identified as Kansas City, Kansas, with a zip code of 66101. The primary point of contact for inquiries is Vernon Hoobler, reachable via email at hoobler.vernon@epa.gov or by phone at 913-551-7638. The contracting office is headquartered in Lenexa, Kansas, with a postal code of 66219. This request is part of the EPA’s broader effort to maintain and enhance the operational efficiency of its laboratory systems, specifically those involved in volatile organic compound analysis using Summa canisters. Vendors are encouraged to provide details on their ability to deliver certified, reliable, and compliant equipment that meets the technical and performance requirements of the STC Air VOA Lab. All relevant submissions and further details can be accessed through the designated SAM.gov workspace link.
Analytical Laboratory Instrument Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 334516
Federal
66--R10Lab:Type 2 Water Purifier Sys Brand Name Equal
Solicitation # 68HE0726Q0040
The Environmental Protection Agency’s Region 7 Contracting Office is seeking competitive bids for Type 2 Water Purifier Systems under solicitation number 68HE0726Q0040, issued as a pre-solicitation notice on July 24, 2026, with responses due by August 7, 2026, at 6:30 PM Eastern Time. The procurement is classified under NAICS code 334516, which pertains to commercial and institutional water and wastewater treatment equipment manufacturing, and is open to all eligible offerors without any designated small business set aside. The equipment is required for performance at Port Orchard, Washington, 98366, and must meet the technical specifications for a Type 2 water purifier system, with brand name or equal terms allowing for equivalent products that satisfy the stated performance criteria. Tricia Zielinski serves as the primary point of contact for inquiries related to this solicitation and can be reached at zielinski.tricia@epa.gov. The contracting office is located in Lenexa, Kansas, 66219, and all proposals must comply with the technical and administrative requirements outlined in the forthcoming full solicitation. Interested parties are encouraged to monitor the SAM.gov workspace for the official Request for Proposal, which will be published following this pre-solicitation notice, to ensure full understanding of evaluation criteria, delivery schedules, and submission procedures.
Analytical Laboratory Instrument Manufacturing

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 334516
Federal
66--PRE-SOLICITATION NOTICE R10 Lab: ICPMS
Solicitation # 68HE0726Q0039
The Environmental Protection Agency’s Region 7 Contracting Office is issuing a pre-solicitation notice for an Inductively Coupled Plasma Mass Spectrometry system to support metal analysis in the R10 Lab, with the solicitation number 68HE0726Q0039. This procurement is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small business concerns are eligible to compete, and the North American Industry Classification System code is 334516, which corresponds to analytical instrument manufacturing. The notice was posted on July 24, 2026, and responses are due by August 6, 2026 at 6:30 PM Eastern Time. The contracting activity is based in Lenexa, Kansas, and the equipment will be delivered and installed at a facility in Port Orchard, Washington, with a zip code of 98366. Tricia Zielinski serves as the primary point of contact for this opportunity and can be reached via email at zielinski.tricia@epa.gov. The notice is intended to gather industry feedback before formal solicitation, allowing vendors to understand the agency’s requirements and provide input on potential sourcing, technical specifications, or other considerations. Although the ICPMS system is the central focus, the notice does not detail exact technical parameters, leaving room for vendor suggestions that align with EPA’s environmental analysis needs. All interested parties are encouraged to review the full notice through the provided SAM.gov link prior to the response deadline to ensure compliance and maximize engagement opportunities under the small business set-aside program.
Analytical Laboratory Instrument Manufacturing

POSTED

8 days ago

DEADLINE

in 5 days
View Details
NAICS: 541519
Federal
7E--R10 Multi-Regional Information Technology Support Services (MRITSS)
Solicitation # 68HE0726R0002
The Environmental Protection Agency (EPA) Region 10 is preparing a solicitation for the Multi-Regional Information Technology Support Services (MRITSS) contract under solicitation number 68HE0726R0002, focused primarily on service desk support, network administration, and IT equipment management. Set aside for 8(a) small business competitors, this upcoming contract aims to provide comprehensive IT support to approximately 650 EPA staff across various field offices in the Pacific Northwest, including locations in Washington, Alaska, Idaho, and Oregon. The services encompass a wide range of technical tasks such as incident response, workstation setup, user training, network monitoring, inventory control, emergency support, and implementation of IT improvements. Contractors are expected to furnish all personnel, tools, and equipment unless government-furnished property is designated. Performance standards are rigorous, requiring 24/7 emergency availability, strict compliance with federal security standards, timely and accurate deliverables, and adherence to service levels. The engagement will be governed by federal regulations including FISMA, NIST SP 800-series standards, and the Privacy Act, emphasizing secure handling of sensitive information and personally identifiable information (PII). Key contract requirements include mandatory background investigations and Tier 4 Public Trust – High Risk security clearances for all contractor personnel, recurring security and privacy training, and continuous vulnerability assessments with monthly reporting to the EPA Contracting Officer. The contractor is responsible for safeguarding government assets, secure packaging of equipment, and ensuring data destruction complies with established national standards. Evaluation and award criteria focus on completeness, accuracy, timeliness, effectiveness, and cost, with the basis of award being Lowest Price Technically Acceptable (LPTA), reflecting strict adherence to the stated performance metrics. While no pricing data or contract value estimates are included in the current informational release, the contract stipulates firm compliance with performance obligations across all technical and security tasks. Contract administration duties such as payment processing, invoicing procedures, and detailed accounting data are not disclosed at this solicitation stage. Overall, the contract establishes a comprehensive framework for the provision of secure, high-quality, and reliable IT support services essential to the EPA’s operations in Region 10.
Other Computer Related Services

POSTED

8 months ago

DEADLINE

N/A
View Details