Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

726-6US-1360 - Utility Pole Replacement Project

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Caltrans has approved an encroachment permit for Southern California Edison to carry out utility pole replacement work within its right-of-way in Palmdale, California. The project involves removing and replacing two existing poles identified as 951518E and 951519E, as well as replacing the hard-set south access pole 951517E, along with installing a new down guy and anchor. Additionally, 2,406 feet of overhead wire will be replaced. All work is confined to existing Caltrans rights-of-way, with no new right-of-way acquisition or relocation of public utilities required. Excavation activities are limited to a maximum depth of 72 inches, an average width of 24 inches, and a maximum length of 2 feet per excavation point. The project is formally titled 726-6US-1360 - Utility Pole Replacement Project and is classified under NAICS code 237130. The primary point of contact is Mojgan Abbassi, Senior Environmental Scientist at Caltrans District 7, reachable via email and phone listed in the contract data. The forecast was posted on June 22, 2026, and the work is located in Palmdale, California.

General Info

Southern California Edison to replace three poles and install 2406 feet of wire in Caltrans right-of-way in Palmdale.

Agency

California → Caltrans, District 7 - Los Angeles

NAICS

237130 - Power and Communication Line and Related Structures ConstructionView NAICS

Place of Performance

Palmdale, CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 22

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Caltrans, District 7 - Los Angeles

Contacts1 person available

OfficeN/A

Organization / Agency

California → Caltrans, District 7 - Los Angeles

Office AddressN/A

Contacts

Mojgan AbbassiSenior Environmental Scientist

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Caltrans approves the encroachment permit for Southern California Edison (SCE) to remove and replace two poles: 951518E (LA 50.104) & 951519E (LA 50.161), and to replace the hard-set south access pole 951517E, to replace the down guy and anchor, and to replace 2406 feet of overhead wire. The project is all within Caltrans right-of-way. Excavation will have a maximum depth of 72 inches, an average width of 24 inches, and a maximum length of 2 feet. No public utilities will be relocated, and no new right-of-way will be acquired for the project.

Similar Contracts

Same NAICS industry code

UTILITY & BACKUP POWER INDEPENDENCE, MISSION CONTROL STATION

Solicitation # utility-backup-power-independence-mission-control-station

The contract seeks small businesses to deliver comprehensive multi-disciplined support services for the construction and ongoing maintenance of an independent backup power plant located in Colorado, with critical focus on ensuring mission continuity and operational resilience. Services encompass a wide array of technical systems including plumbing, HVAC, fire suppression, mechanical equipment and piping, electrical controls, telecommunications, fire alarm systems, lightning protection, cybersecurity measures, security escort coordination, and full system commissioning, with particular emphasis on generator deployment and integration. All work must adhere to stringent reliability and safety standards to support the uninterrupted operation of a mission control station under all conditions. This solicitation is exclusively restricted to small businesses under the SBA’s set-aside program, accepting eligibility from Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with a single NAICS code of 237130 for Electrical and Other Construction Activities. The proposal response deadline is September 1, 2026, and all submissions must align with federal small business contracting guidelines. Primary point of contact for inquiries is Erica Vecchio of BSGI-Weston JV, LLC, reachable via email or phone provided in the solicitation. The place of performance is fixed in Colorado, and no other geographic locations are specified for this project.

BSGI-Weston JV, LLC

POSTED

about 13 hours ago

DEADLINE

Directional Boring and Conduit InstallationThe contract involves the installation of 16,200 linear feet of 1–2 inch HDPE primary power conduit using horizontal directional drilling techniques, encompassing all phases including pilot bore, reaming, and pullback operations. All work must adhere strictly to the City of Albany’s specifications to ensure compliance with local regulatory and engineering standards. The project is classified as a subcontract under NAICS code 237130, indicating it falls within the utility system construction category, and is solicited by the City of Albany through the Georgia state procurement system. The opportunity was posted on August 6, 2026, with a mandatory response deadline of September 8, 2026, at 7:30 PM, and performance is expected to occur within the jurisdictional boundaries overseen by the City of Albany.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

27-014 Conduit & Wire Installation Phase 4

Solicitation # 27-014

The City of Albany is seeking qualified contractors to bid on the installation of 1 to 2 inch HDPE primary power conduit using the directional bore method between transformers, with a minimum burial depth of 3.5 feet, as detailed in the provided engineering drawings. The work is part of Phase 4 of the Conduit & Wire Installation project and requires full provision of labor, equipment, and materials necessary to complete the scope. Bids must be submitted by 2:30 p.m. on September 8, 2026, to the Procurement Division at 222 Pine Avenue, Suite 260, Albany, Georgia. The solicitation number is PE-64750-NONST-2027-000000215, and all proposals must comply with the technical specifications outlined in the project documentation. The contract is open to general competition with no specific set aside, and performance is expected to occur within the City of Albany in the state of Georgia. For inquiries or additional information, Joshua Williams is the point of contact and can be reached at 229-431-3211 or jswilliams@albanyga.gov. The solicitation was posted on August 6, 2026, and all interested parties are encouraged to review the complete bid package through the provided online portal. Contractors must ensure they have the proper experience and equipment to execute directional boring operations and meet all regulatory and safety standards applicable to underground utility installation in Georgia. Failure to meet the specified depth requirements or installation methodology may result in bid rejection. All submissions must be sealed and clearly labeled with the solicitation number.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Communication Tower Removal Services

Solicitation # 645-DOTRFB-2948-2027

The Iowa Department of Transportation is soliciting competitive bids for the removal of five communication towers under solicitation number DASIowa-645-DOTRFB-2948-2027, with bids due by August 27, 2026 at 1:00 p.m. CT. The contract will be awarded to the most advantageous bidder based on cost and other factors including compliance with mandatory requirements, proposed staffing, adherence to the schedule, past performance, and work capacity. All work must follow approved designs and will be under direct supervision of the Iowa DOT, with periodic site inspections conducted to ensure coordination. The estimated start date is September 14, 2026, with completion targeted for December 31, 2026. A site visit is recommended, requiring 24-hour advance notice to Teri Schulz, and any questions arising from the visit must be submitted through the official Q&A board or by email. Bidders are warned that no price or scope adjustments will be accepted for issues that could have been identified through a thorough site inspection. Deliveries are F.O.B. Destination, and the Iowa DOT is tax-exempt, with certificates available upon request. Davis-Bacon wage requirements do not apply. The bid opening will be conducted publicly via Microsoft Teams and by phone, with all responses posted online after the deadline. Until award, all communication must go through the designated Purchasing Agent, and no questions will be accepted after the Q&A submission deadline. Only one contract will be awarded for the full scope of work.

POSTED

about 23 hours ago

DEADLINE

26-27-012-Data Network Installation for Aviation Training Facility Building Hangars 100 and 300

Solicitation # RFP-125851

The City of Danville, Virginia, has issued a solicitation for the installation of a data network at the Aviation Training Facility in Hangars 100 and 300, identified by solicitation number RFP-125851. This project involves the design, supply, and installation of a comprehensive data networking infrastructure to support operational and training activities within the designated aviation facilities. The solicitation is open to qualified vendors with expertise in commercial data network deployment, with responses due by September 2, 2026, at 9:30 PM Eastern Time. The contract is classified under a State, Local, or Educational (SLED) organization type and is managed by the City of Danville through its designated office. Sheryl Royal, reachable at royalsw@danvilleva.gov or (434) 799-6528, serves as the point of contact for all inquiries related to this solicitation. The work must be performed at the Aviation Training Facility located in the City of Danville, Virginia. While no specific set-aside or NAICS code is provided, interested parties are expected to comply with all applicable state and federal requirements for public infrastructure contracts. Full details and submission instructions can be accessed via the online portal linked in the solicitation notice.

City of Danville

POSTED

DEADLINE

Installation of 5” ConduitThe contract entails the supply and installation of five-inch conduit for new underground cable runs, requiring full compliance with USACE and NAVFAC standards. Work includes proper bedding, precise alignment, and all associated labor and materials necessary to ensure the conduit system meets federal military construction specifications. Performance is limited to the zip code area 23511, with all deliverables expected to align with the technical and regulatory requirements of the Department of Defense. This is an 8(a) set-aside subcontract under NAICS code 237130, reserved exclusively for small disadvantaged businesses certified under the SBA’s 8(a) program. The solicitation was posted on August 6, 2026, with proposals due by September 7, 2026, and is managed by Navfacsyscom Mid-Atlantic. Contractors must be prepared to fulfill all contractual obligations within the specified timeframe and location, with no provision for alternative performance sites or deviations from established military construction protocols.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

in about 1 month

Y--Rifle (RFL) Substation Communications Tower

Solicitation # 89503226RWA000024

The bid closing date for the Rifle (RFL) Substation Communications Tower project has been extended under Amendment (0001) to allow additional time for submissions. The solicitation, numbered 89503226RWA000024, was originally posted on July 24, 2026, and is managed by the Department of Energy’s Western-Rocky Mountain Region office located in Loveland, Colorado. The new response deadline is set for August 7, 2026, at 10:00 PM Mountain Time. The project falls under NAICS code 237130, indicating it relates to electric power transmission and distribution system construction. There is no set-aside designation specified for this opportunity. Primary point of contact for inquiries is John W. Pratt, reachable at 720-962-7166 or jpratt@wapa.gov. All bids must be submitted through the SAM.gov portal linked in the solicitation details.

Western-Rocky Mountain Region

POSTED

DEADLINE

Tower Inspection & Maintenance- Tobyhanna Army Depot

Solicitation # W51AA126QA079

The contract solicitation W51AA126QA079 for Tower Inspection & Maintenance at Tobyhanna Army Depot is a Small Business Set Aside under NAICS code 237130, with a base period from September 1, 2026, through August 31, 2027, and four one-year option periods extending through August 31, 2031. The work involves annual safety inspections and on-call repairs for five towers using a hybrid contract structure combining fixed-price for scheduled inspections and time-and-materials for unscheduled repairs, with ceiling rates applied to T&M line items. Performance is mandated at Tobyhanna Army Depot, Pennsylvania, with inspection and acceptance occurring on-site per FAR 52.212-4. Offerors must submit proposals via email to Megan Jones by August 17, 2026, at 9:00 PM EST and include SF1449, a completed pricing sheet, past performance examples, and a quality control program. A site visit is scheduled for August 12, 2026, with critical access restrictions detailed in Attachment 3. Evaluation is based primarily on price and past performance under a trade-off methodology, with no numerical weights assigned, allowing the Government to select the most advantageous offer. The contract requires strict compliance with CMMC Level 2 (self-assessment), Defense Federal Acquisition Regulation Supplement (DFARS) cybersecurity standards including 252.204-7012 for safeguarding covered defense information, and 252.204-7018 prohibiting certain telecommunications equipment. Contractors must implement an insider threat program, maintain an operations security plan approved by the Government within 90 days of award, and ensure all personnel hold appropriate security clearances and complete mandatory training including TARP, OPSEC Level I, and antiterrorism awareness. Access to the installation requires valid CACs, FBI fingerprint checks, NACI adjudication, and adherence to strict physical security and vehicle search protocols. All personnel handling Controlled Unclassified Information must comply with 32 CFR 2002 marking requirements, and no CUI may be removed from the facility. Packaging and marking requirements focus on hazardous materials compliance under RCRA and 40 CFR 273, with no military packaging standards applied. Invoicing is strictly through Wide Area WorkFlow with invoice types defined as cost vouchers or Invoice

W6QK Acc-Apg Cont Ct Tyad Ofc

POSTED

DEADLINE

SP-364 Replace Underground Cabling in SP Area

Solicitation # N4008526R0249

The contract solicitation N4008526R0249, titled “SP-364 Replace Underground Cabling in SP Area,” is an 8(a) set-aside issued by the Naval Facilities Engineering Systems Command Mid-Atlantic for the replacement of underground electrical distribution cabling at Naval Station Norfolk, Virginia. The work scope involves replacing existing underground cables between SW 111 at SP-35 and the manholes supplying buildings SP-254, SP-257, SP-362, SP-364, and SP-366, including the installation of above-ground junction boxes near SP-254 and SP-257, with all new systems required to be operationally ready and approved by the Contracting Officer before any demolition of existing infrastructure begins. The project must be completed within 330 calendar days from the task order award, which serves as the notice to proceed, and includes a 15-day period for award distribution and submission of required bonding and insurance documentation. The solicitation is strictly sealed and must be submitted electronically via the PIEE Solicitation Module by 1400 EDT on September 7, 2026, with a hard copy delivered via FedEx, UPS, or hand delivery no later than three days after the electronic deadline. The contract is governed under an existing indefinite delivery/indefinite quantity framework, incorporating all terms and conditions from N40085-23-D-0030/0031/0032/0036 and N40085-24-D-0052. Award will be made under the Lowest Price Technically Acceptable (LPTA) method, with price as the sole evaluation factor, assessed against the total sum of CLIN 0001AA and extensions under CLINs 0001AB through 0001AE. Proposals must include a completed Price Proposal Form, bid guarantee bond (Standard Form 24) with a penal sum of at least 20% of the offer price or $3,000,000, whichever is less, and must comply with FAR and DFARS clauses including liquidated damages of $1,284.93 per calendar day of delay, performance and quality control requirements, warranty management planning, and full utility self-provision by the contractor. Contractors must adhere to stringent safety and

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

in about 1 month

TD1691129 Norco Removal of Idle Facilities Project - Southern California EdisonThe project aims to remove idle infrastructure facilities in Norco, California, specifically targeting the elimination of a pole at Structure 4206494E along with an H-frame and anchor at Structure 1483252E. This initiative is part of a broader effort to de-energize and decommission outdated utility structures, contributing to environmental and safety improvements in the area. The project is listed under the title TD1691129 Norco Removal of Idle Facilities Project - Southern California Edison and was forecasted on August 6, 2026, indicating it is a planned action rather than an active procurement. The primary point of contact is Nimisha Patel, an Environmental Scientist with the California State Water Resources Control Board, Division of Water Quality, who can be reached via phone or email for project-related inquiries. Robert LeMoine of Southern California Edison serves as a secondary point of contact, representing the utility's environmental services division. The work will occur in Norco, California, and full details can be accessed through the provided link to the CEQAnet project database.

SWRCB, Division of Water Quality

POSTED

DEADLINE

Sonic 2209 WHISKEY-CO 511 S Garfield AveThe California Public Utilities Commission has forecasted a project titled Sonic 2209 WHISKEY-CO 511 S Garfield Ave to install telecommunications infrastructure aimed at improving wireless and broadband speeds in Alhambra, California. This initiative is part of broader efforts to enhance digital connectivity and is being managed under the agency’s regulatory oversight, with the primary point of contact being Andrew Chan, CEQA Project Manager, reachable via email at andrew.chan@cpuc.ca.gov or phone at 415-696-7337. The project is listed as a forecast with a posted date of August 6, 2026, indicating it is in the planning or pre-solicitation phase, though no solicitation number, NAICS code, or set-aside details have been provided. The place of performance is explicitly designated as Alhambra, California, and while the full address details are not included, the project is expected to involve physical construction and deployment of network components within the area. The project is being tracked under the California Environmental Quality Act (CEQA) system with a unique identifier available via the provided link, suggesting that environmental review and compliance procedures are integral to the planning process. No specific vendor or contract value has been disclosed at this stage, but the involvement of the CPUC indicates this initiative aligns with state regulatory priorities for expanding reliable and high-speed communication services.

California Public Utilities Commission

POSTED

DEADLINE

Stormwater Management System Installation

State of NC - Construction Office

POSTED

DEADLINE