This Pre-Solicitation opportunity was posted on January 21, 2011. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

99--Recovery Communications (RCOM) Antenna Preventive and Corrective Maintenance

Closed

10351Federal

Submission Closed02/11/2011, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237130

New

AAL-1440-01 RCO Relocation Hooper Bay - BNATCS

Solicitation # AAL-1440-01

Solicitation AAL-1440-01 is for the RCO relocation project located in Hooper Bay, Alaska, managed by PTSI Managed Services Inc. and the FAA. The scope of work involves specialized construction activities including foundation work, duct bank installation, and grounding work. This project falls under NAICS code 237130 for Power and Communication Line and Related Structures Construction, with an estimated contract magnitude between 100,000 and 250,000 dollars. The solicitation was posted on October 29, 2026, with a response deadline of November 14, 2026, and a proposed start date of December 10, 2026. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested firms should coordinate with the primary point of contact, Masanori Akers, the Parsons Subcontract Administrator.

PTSI Managed Services Inc.

POSTED

DEADLINE

Installation of Buried Fiber Optic Cable Stanton North Substation to Hoskins Substation

Solicitation # 26085

The Nebraska Public Power District is soliciting bids for Request for Bid No. 26085 to install approximately six miles of underground fiber optic cable between the Stanton North and Hoskins Substations in northeast Nebraska. The scope of work encompasses all labor, materials, and supervision required for staking, material coordination, property owner contacts, schedule preparation, mobilization, demobilization, and right-of-way restoration. Key deliverables include the installation of contractor-provided 48-strand buried fiber optic cable and district-provided 48-strand all-dielectric fiber, starting from the Hoskins 345kV substation control building. Work must be completed by April 15, 2027, with an expected award date on or before November 25, 2026. Qualified bidders must demonstrate the completion of at least three similar projects within the last five years and provide certifications regarding litigation and bonding history. Bids are due by November 13, 2026, and must include a completed pricing spreadsheet, current labor and equipment rates, and a proposed schedule. The contract will be awarded to the responsible bidder with the best evaluated bid based on price, technical conformance, and general qualifications. Payment terms specify that 95 percent of the price is paid upon acceptable performance, with 5 percent retained until final acceptance. Contractors are required to maintain comprehensive insurance coverages, including Commercial General Liability of 1 million dollars per occurrence and Workers Compensation as required by the State of Nebraska.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Transmission Installation & InterconnectionThis subcontract for High-Voltage Transmission Installation and Interconnection involves the installation of 230kV transmission lines at the NSB Kings Bay US Navy facility. The scope of work includes the recapitalization of the transmission loop, the coordination of power service interruptions to ensure continuity of operations, and the integration of proprietary protection schemes with the Georgia Power Company to deliver a fully operational transmission loop. The project requires the use of specialized machinery and 230kV transmission equipment suitable for military zones. Due to the nature of the facility and the critical infrastructure involved, personnel must possess Secret security clearances and maintain strict NERC CIP compliance. The contract is managed under Navfacsyscom Southeast for the Department of Defense.

Navfacsyscom Southeast

POSTED

DEADLINE

B21 Utilities & Site Improvements, Communications & Electrical Infrastructure, Dyess AFB OT Feasibility & Business Feedback

Solicitation # W9126G27R1CSY

The U.S. Army Corps of Engineers, Fort Worth District, is conducting market research via a Sources Sought notice for the B-21 Utilities and Site Improvements project at Dyess Air Force Base, Texas. This initiative aims to establish high-reliability primary electrical power distribution and dedicated fiber-optic communications infrastructure to support the bed-down of the B-21 weapons system. The scope includes the installation of single-mode fiber optic cables, telephone system expansion, power cabling in concrete encased ducts, pole-mounted conductors, and associated transformers and switchgear. The project also encompasses site improvements such as earthwork, grading, and erosion control. The estimated Construction Cost Limitation is $28,550,000, though an $8 million electric substation and specific end-user network equipment are expressly excluded from this contract. The government is currently evaluating whether to utilize a traditional Federal Acquisition Regulation based contract or an Other Transaction Agreement under 10 U.S.C. section 2808a. If a collaborative procurement framework is chosen, a two-phase selection process will be implemented, focusing first on technical capability, past performance, and collaborative execution history, followed by an evaluation of final technical and price proposals. The project must adhere to strict Department of Defense standards, including UFC 1-200-01 for general building requirements, UFC 4-010-01 for antiterrorism, and UFC 4-010-06 for cybersecurity of facility-related control systems. The anticipated period of performance is 690 calendar days from the notice to proceed, with a required beneficial occupancy date of March 8, 2030.

POSTED

DEADLINE

De Palma Road Electrical Conduit Installation Project

Solicitation # TLARC-819

The County of Riverside is soliciting bids for the De Palma Road Electrical Conduit Installation Project (Project No. D4-0072) located in the Community of Horsethief Canyon, California. The project involves the excavation and backfill of approximately 1,000 feet of trenching, the installation of 685 feet of 1.5-inch and 350 feet of 3-inch electrical conduit and handholes, and the installation of 6-inch Type D concrete curb per County Standard No. 204. All work must adhere to Southern California Edison plans and be completed within 30 working days from the commencement date specified in the County's written order. The estimated project cost is 209,000 dollars. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit their proposals by December 2, 2026, at 1:30 P.M. Pacific Time, including a non-collusion declaration and a bid guarantee of 10 percent of the total bid. The awarded contractor must provide performance and payment bonds, comply with California State Labor Code prevailing wage requirements, and adhere to specific affirmative action plans based on contract value and employee count. Payments will be made monthly, with the Owner paying 90 percent of the value of labor and materials incorporated into the work and 75 percent of materials stored on site, subject to certification by the Architect.

POSTED

DEADLINE

Installation Of Street Lighting On Raymond Avenue From Maple Street To North City Limits

Solicitation # 2026-IFB-CIV-0549

The City of Pasadena Department of Public Works is soliciting bids under solicitation number 2026-IFB-CIV-0549 for the installation of a new street lighting system on Raymond Avenue, extending from Maple Street to the North City Limits. The project requires the contractor to furnish and install concrete street lighting standards, foundations, LED luminaires and fixtures, conduits, conductors, pull boxes, and other appurtenant work. Key technical deliverables include 29W or 50W LED replacements, galvanized steel conduits, and 6 foot Type S Scroll Arms. The contractor must provide all necessary labor, materials, and equipment, ensuring compliance with the ADA, CBC, Title 24, and PROWAG accessibility guidelines. Bids must be submitted electronically via the City of Pasadena eProcurement Portal by 2:00 pm on November 17, 2026. Qualified bidders must provide evidence of experience with two similar governmental projects and submit several mandatory documents, including Form AA-1, Form AA-2 for labor exceeding 25,000 dollars, a non-collusion declaration, and a DHS contract disclosure. A bid security of five percent of the total bid price is required, and the successful awardee must provide material and faithful performance bonds for 100 percent of the base bid. Work must commence within 15 calendar days of the Notice to Proceed and be completed within 20 working days. Invoicing is handled through the city's Vendor Invoice Portal, with payments issued on Tuesdays and Thursdays.

City of Pasadena Department of Public Works

POSTED

DEADLINE

Fiber Optic Ground Wire (OPGW) InstallationThis subcontract involves the installation of .551 diameter fiber optic ground wire for prime contractors working on Nebraska Public Power District projects. The scope of work specifically covers the installation of OPGW from Structure 107 to Dead-End Structure 79, requiring the delivery of a fully installed and tested system. To ensure the integrity of the fiber and prevent damage, the contractor must utilize specialized pulling and tensioning equipment in strict accordance with the engineering specifications outlined in Section G. The project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Conductor and Shield Wire InstallationThis subcontract for High-Voltage Conductor and Shield Wire Installation involves performing specialized electrical infrastructure work for prime contractors on Nebraska Public Power District projects. The scope of work focuses on upgrading existing 266 26/7 ACSR to 954 45/7 ASCR Rail conductor and replacing 3/8 inch EHS steel shield wire with 7/16 inch EHS steel. Additionally, the contractor is responsible for installing insulators, dampers, crossarms, and X-braces in strict accordance with the stringing charts provided in Section I. To successfully execute the project, the contractor must utilize tensioners and pullers to deliver a fully tensioned conductor and shield wire system. This opportunity falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

Transmission Structure Erection and Pole SettingThis subcontract for the Nebraska Public Power District involves the erection and setting of transmission structures. The scope of work requires the installation of 28 wood H-Frame tangent structures and one steel monopole on a drilled pier. Key technical requirements include backfilling poles with crushed limestone and the installation of ground rods, wire, molding, and staples, with ground impedance testing performed according to specific technical drawings. The contractor is responsible for providing all necessary pole setting equipment and drilling rigs to deliver fully assembled and set structures. This project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

115kV Transmission Line 1266 Rebuild Stanton North Substation to Dead-End Structure 79

Solicitation # 26-012

Nebraska Public Power District is soliciting sealed bids for Contract No. 26-012 to rebuild approximately 4.05 miles of the 115kV transmission line 1266, extending from the Stanton North substation to Dead-End Structure 79. The scope of work requires the contractor to provide all labor, supervision, equipment, and miscellaneous materials to replace all structures, conductors, shield wires, and hardware. Key technical deliverables include the installation of 28 wood H-Frame tangent structures and one tubular steel monopole dead-end on a drilled pier, upgrading the conductor to 954 kcmil 45/7 ASCR Rail, and installing 0.551 diameter fiber optic ground wire and EHS steel shield wire. The project also involves tree clearing, site preparation, and the removal of existing structures and conductors. Bids are due by 2:00 p.m. CST on December 2, 2026, and must be submitted as sealed hard copies to the Procurement Department in Columbus, Nebraska. The award will be based on the lowest cost and best bid, with evaluation factors including technical conformance, schedule capability, financial standing, and past performance history. Prospective bidders are encouraged to attend an optional pre-bid teleconference and site visit on November 23, 2026. Required submission documents include a signed proposal page, a completed price quotation table, a W-9 form, and bid security in the form of a certified check, irrevocable letter of credit, or bid bond. The successful contractor must provide a performance bond and maintain workers compensation and commercial general liability insurance.

Nebraska Public Power District

POSTED

DEADLINE

RFP No. 27-05: Demolition, Development, Construction & Lease of a Telecommunications Tower Facility

Solicitation # BD-27-1158-NBPT3-NBPT3-134879

The City of Newburyport is soliciting proposals under RFP No. 27-05 for the design, permitting, financing, construction, ownership, operation, and maintenance of a telecommunications tower facility. Located at 1 Plum Island Point Road in Newburyport, Massachusetts, the project aims to improve broadband infrastructure, public safety communications, and emergency response reliability on Plum Island and surrounding coastal areas. The selected vendor will be responsible for constructing a facility capable of supporting multiple carriers and city public safety equipment, relocating existing safety equipment, and demolishing the current tower on the premises. This solicitation, identified as BD-27-1158-NBPT3-NBPT3-134879, was posted on October 28, 2026, with a response deadline of November 20, 2026, at 4:00 PM. Interested qualified telecommunications infrastructure developers, wireless carriers, or tower management companies must submit their proposals by the deadline, as electronic quotes are not permitted. Tom Watkins serves as the primary point of contact and purchaser for the project. An optional pre-proposal site visit was scheduled for November 5, 2026.

POSTED

DEADLINE

MBE, WBE and SDVOB Contracting Opportunity

Solicitation # 2140303

L3Harris Technologies has been contracted by the New York State Thruway Authority to implement a new Land Mobile Radio system across 54 communications sites along the Thruway corridor, extending from Buffalo to New York City. This system is designed to support essential personnel performing roadway maintenance, road repair, and snow removal. The project involves significant site-level work, including pouring concrete for antenna towers, shelters, and generators, providing New York certified concrete testing services, installing antennas and coaxial cables with sweep testing, and performing electrical work such as installing power conduits, grounding components, transfer switches, electrical panels, and site fences. L3Harris is seeking qualified lower-tier subcontractors to support these efforts, with specific socioeconomic goals of 15 percent for Minority-Owned Businesses, 15 percent for Women-Owned Businesses, and 6 percent for Service-Disabled Veteran-Owned Businesses. Interested parties must submit their company and contact information, a brief description of capabilities, and a NYSTA Certified Vendor Number to Program Manager Daniel Voiland by December 10, 2026. An executed Non-Disclosure Agreement will be required before project plans are released for review.

New York

POSTED

2 days ago

DEADLINE

in about 1 month

AI Contract Overview

The Federal Aviation Administration is seeking potential sources for a firm-fixed price contract to provide preventive and corrective maintenance for High Frequency/Single Side Band antenna systems across 25 locations in the United States. The selected contractor will be responsible for providing all labor, supervision, tools, equipment, materials, and replacement parts, though maintenance of antenna couplers and exciters remains the responsibility of the FAA Logistic Center. Contractors must be licensed or capable of sourcing original equipment manufacturer parts or equivalents that meet or exceed OEM specifications. The anticipated contract structure consists of a five-year term, including a base year and four one-year option periods. This market survey is being conducted to determine the competition method, with possibilities including full and open competition or set-asides for small businesses, service-disabled veteran-owned small businesses, or SBA 8(a) certified firms. Interested vendors must submit a capability statement, a completed business declaration form, and any applicable certifications by the specified deadline to be considered for future solicitation.

General Info

FAA seeks five-year firm-fixed price contract for HF/SSB antenna maintenance at 25 locations.

Agency

N/A

NAICS

237130 - Power and Communication Line and Related Structures Construction

Place of Performance

Not specified

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 21

Presolicitation

Response DeadlineFeb 11

Deadline has passed

Submission Closed

02/11/2011, 05:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

The Federal Aviation Administration (FAA) has a requirement for preventive and corrective maintenance for High Frequency/Single Side Band antenna systems for 25 locations in the United States. The maintenance does not include antenna couplers. Couplers and exciters are supported by the FAA Logistic Center. The contractor would furnish all labor, supervision, tools, equipment, materials, replacement parts, and services for the effort. The Contractor must have a License or be capable of acquiring and using new original equipment manufacturer (OEM) parts, OEM parts remanufactured to meet OEM specifications, or parts meeting or exceeding OEM specifications for antenna system repair. Specific requirements are identified in the Statement of Work (SOW) attached.The current contractor for this effort is: United States Tower Services, Ltd.5263 Agro DriveFrederick, MD 21701 The FAA is conducting this market survey to seek additional potential sources capable of meeting technical and delivery requirements. Any vendor that believes it can provide these services is invited to submit a statement of capabilities (in contractor format) addressing its abilities to meet all of the requirements identified in the SOW. This is anticipated to be a Firm-Fixed Price Contract with a period of five (5) years, a base year with four (4) one-year option periods. At this time the nature of the final competition has not been determined. The FAA may decide to do a full and open competition or set aside all or part of the procurement for small businesses, service-disabled veteran-owned small businesses or eligible socially and economically disadvantaged businesses that are certified by the SBA for participation in the SBA's 8(a) Program. The Principal North American Industry Classification System (NAICS) size standard code for this requirement is 237130, Power and Communication Line and Related Structures Construction, with a size standard of $33.5 million. All responses (one per company) are to be provided on company letterhead and limited to a total of 15 typewritten pages. No type font less than 11 point may be used. PURPOSE: This market survey is designed to provide information for the FAA to consider in choosing the method and type of procurement competition. The failure to obtain adequate and appropriate SBA 8(a) or other small business participation may result in a determination to conduct this procurement under other competitive procedures. The FAA requires proof of documentation from interested service-disabled veteran-owned small businesses and from eligible socially and economically disadvantaged businesses that are certified by the Small Business Administration (SBA) 8(a) Program. In order to make this determination the FAA requires the following information from interested vendors: CAPABILITY STATEMENT: All responders must provide a statement that addresses the following: Statement of capabilities (in contractor format) addressing its abilities to meet all of the requirements identified in the statement of work. In order to be considered responsive, organizations expressing interest in this matter must provide the following: a. Capability Statement (as defined above)b. Completed Business Declaration Form (attached)c. Copy of SBA 8(a) Certification Form or proof of documentation from service-disabled veteran-owned small business (if applicable). ATTACHMENTS: a. Draft Statement of Work (SOW) b. Business Declaration Form SUBMISSION FORMAT: Format Electronic Quantity 1 set contact@example.gov OR FormatHard copy Quantity 1 original AddressNadia Shash950 L'Enfant Plaza North, SWSuite 300, WS 105Washington, DC. 20024 NOTES: Electronic submission is preferred. Submissions must not exceed 15 pages in length for the capability statement. The electronic submission should be in either Microsoft WORD format or portable document format (PDF). Please note that the FAA e-mail server restricts file size to 10MB per email message, therefore, responses may have to be submitted in more than one e-mail in order to be received. This market survey is for informational purposes only and shall not be construed as a commitment or a promise to contract by the Government. All Submissions must be received by 2:00 p.m. Eastern Time on February 4, 2011. For questions, requests for additional information, etc. regarding this market survey, contact Nadia Shash, Contracting Specialist, via E-mail: contact@example.gov. Submission must include company Point(s) of Contact, telephone number(s), FAX number(s), E-mail address(es) (if available), and mailing address. This announcement is not intended to guarantee procurement of the services, and shall not be construed as a commitment by the Government to enter into a contract. The Government is not liable for costs associated with the preparation, submittal of inquiries or responses for this announcement and will not reimburse any firm for cost incurred in responding to this public announcement. Responses will not be returned. Since this is a sources sought announcement, no evaluation letters and/or results will be issued to the respondents. No solicitation exists at this time. If a solicitation is issued, it will be announced on the FAA's Contract Opportunities web page. It is the offeror's responsibility to monitor this site for the release of the solicitation.