This Government Contract opportunity from Department Of Defense was posted on October 18, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

N--Design & install a temporary 15KV (13,800 Volts, 3 phase) electrical distribution system for Lock and Dam 10 (vicinity of Guttenberg, IA) dewatering, remove system upon completion of project.

Awarded

W912ES-10-T-0124Federal

Submission Closed10/18/2010, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237130

New

AAL-1440-01 RCO Relocation Hooper Bay - BNATCS

Solicitation # AAL-1440-01

Solicitation AAL-1440-01 is for the RCO relocation project located in Hooper Bay, Alaska, managed by PTSI Managed Services Inc. and the FAA. The scope of work involves specialized construction activities including foundation work, duct bank installation, and grounding work. This project falls under NAICS code 237130 for Power and Communication Line and Related Structures Construction, with an estimated contract magnitude between 100,000 and 250,000 dollars. The solicitation was posted on October 29, 2026, with a response deadline of November 14, 2026, and a proposed start date of December 10, 2026. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested firms should coordinate with the primary point of contact, Masanori Akers, the Parsons Subcontract Administrator.

PTSI Managed Services Inc.

POSTED

DEADLINE

Installation of Buried Fiber Optic Cable Stanton North Substation to Hoskins Substation

Solicitation # 26085

The Nebraska Public Power District is soliciting bids for Request for Bid No. 26085 to install approximately six miles of underground fiber optic cable between the Stanton North and Hoskins Substations in northeast Nebraska. The scope of work encompasses all labor, materials, and supervision required for staking, material coordination, property owner contacts, schedule preparation, mobilization, demobilization, and right-of-way restoration. Key deliverables include the installation of contractor-provided 48-strand buried fiber optic cable and district-provided 48-strand all-dielectric fiber, starting from the Hoskins 345kV substation control building. Work must be completed by April 15, 2027, with an expected award date on or before November 25, 2026. Qualified bidders must demonstrate the completion of at least three similar projects within the last five years and provide certifications regarding litigation and bonding history. Bids are due by November 13, 2026, and must include a completed pricing spreadsheet, current labor and equipment rates, and a proposed schedule. The contract will be awarded to the responsible bidder with the best evaluated bid based on price, technical conformance, and general qualifications. Payment terms specify that 95 percent of the price is paid upon acceptable performance, with 5 percent retained until final acceptance. Contractors are required to maintain comprehensive insurance coverages, including Commercial General Liability of 1 million dollars per occurrence and Workers Compensation as required by the State of Nebraska.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Transmission Installation & InterconnectionThis subcontract for High-Voltage Transmission Installation and Interconnection involves the installation of 230kV transmission lines at the NSB Kings Bay US Navy facility. The scope of work includes the recapitalization of the transmission loop, the coordination of power service interruptions to ensure continuity of operations, and the integration of proprietary protection schemes with the Georgia Power Company to deliver a fully operational transmission loop. The project requires the use of specialized machinery and 230kV transmission equipment suitable for military zones. Due to the nature of the facility and the critical infrastructure involved, personnel must possess Secret security clearances and maintain strict NERC CIP compliance. The contract is managed under Navfacsyscom Southeast for the Department of Defense.

Navfacsyscom Southeast

POSTED

DEADLINE

B21 Utilities & Site Improvements, Communications & Electrical Infrastructure, Dyess AFB OT Feasibility & Business Feedback

Solicitation # W9126G27R1CSY

The U.S. Army Corps of Engineers, Fort Worth District, is conducting market research via a Sources Sought notice for the B-21 Utilities and Site Improvements project at Dyess Air Force Base, Texas. This initiative aims to establish high-reliability primary electrical power distribution and dedicated fiber-optic communications infrastructure to support the bed-down of the B-21 weapons system. The scope includes the installation of single-mode fiber optic cables, telephone system expansion, power cabling in concrete encased ducts, pole-mounted conductors, and associated transformers and switchgear. The project also encompasses site improvements such as earthwork, grading, and erosion control. The estimated Construction Cost Limitation is $28,550,000, though an $8 million electric substation and specific end-user network equipment are expressly excluded from this contract. The government is currently evaluating whether to utilize a traditional Federal Acquisition Regulation based contract or an Other Transaction Agreement under 10 U.S.C. section 2808a. If a collaborative procurement framework is chosen, a two-phase selection process will be implemented, focusing first on technical capability, past performance, and collaborative execution history, followed by an evaluation of final technical and price proposals. The project must adhere to strict Department of Defense standards, including UFC 1-200-01 for general building requirements, UFC 4-010-01 for antiterrorism, and UFC 4-010-06 for cybersecurity of facility-related control systems. The anticipated period of performance is 690 calendar days from the notice to proceed, with a required beneficial occupancy date of March 8, 2030.

POSTED

DEADLINE

De Palma Road Electrical Conduit Installation Project

Solicitation # TLARC-819

The County of Riverside is soliciting bids for the De Palma Road Electrical Conduit Installation Project (Project No. D4-0072) located in the Community of Horsethief Canyon, California. The project involves the excavation and backfill of approximately 1,000 feet of trenching, the installation of 685 feet of 1.5-inch and 350 feet of 3-inch electrical conduit and handholes, and the installation of 6-inch Type D concrete curb per County Standard No. 204. All work must adhere to Southern California Edison plans and be completed within 30 working days from the commencement date specified in the County's written order. The estimated project cost is 209,000 dollars. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit their proposals by December 2, 2026, at 1:30 P.M. Pacific Time, including a non-collusion declaration and a bid guarantee of 10 percent of the total bid. The awarded contractor must provide performance and payment bonds, comply with California State Labor Code prevailing wage requirements, and adhere to specific affirmative action plans based on contract value and employee count. Payments will be made monthly, with the Owner paying 90 percent of the value of labor and materials incorporated into the work and 75 percent of materials stored on site, subject to certification by the Architect.

POSTED

DEADLINE

Installation Of Street Lighting On Raymond Avenue From Maple Street To North City Limits

Solicitation # 2026-IFB-CIV-0549

The City of Pasadena Department of Public Works is soliciting bids under solicitation number 2026-IFB-CIV-0549 for the installation of a new street lighting system on Raymond Avenue, extending from Maple Street to the North City Limits. The project requires the contractor to furnish and install concrete street lighting standards, foundations, LED luminaires and fixtures, conduits, conductors, pull boxes, and other appurtenant work. Key technical deliverables include 29W or 50W LED replacements, galvanized steel conduits, and 6 foot Type S Scroll Arms. The contractor must provide all necessary labor, materials, and equipment, ensuring compliance with the ADA, CBC, Title 24, and PROWAG accessibility guidelines. Bids must be submitted electronically via the City of Pasadena eProcurement Portal by 2:00 pm on November 17, 2026. Qualified bidders must provide evidence of experience with two similar governmental projects and submit several mandatory documents, including Form AA-1, Form AA-2 for labor exceeding 25,000 dollars, a non-collusion declaration, and a DHS contract disclosure. A bid security of five percent of the total bid price is required, and the successful awardee must provide material and faithful performance bonds for 100 percent of the base bid. Work must commence within 15 calendar days of the Notice to Proceed and be completed within 20 working days. Invoicing is handled through the city's Vendor Invoice Portal, with payments issued on Tuesdays and Thursdays.

City of Pasadena Department of Public Works

POSTED

DEADLINE

Fiber Optic Ground Wire (OPGW) InstallationThis subcontract involves the installation of .551 diameter fiber optic ground wire for prime contractors working on Nebraska Public Power District projects. The scope of work specifically covers the installation of OPGW from Structure 107 to Dead-End Structure 79, requiring the delivery of a fully installed and tested system. To ensure the integrity of the fiber and prevent damage, the contractor must utilize specialized pulling and tensioning equipment in strict accordance with the engineering specifications outlined in Section G. The project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Conductor and Shield Wire InstallationThis subcontract for High-Voltage Conductor and Shield Wire Installation involves performing specialized electrical infrastructure work for prime contractors on Nebraska Public Power District projects. The scope of work focuses on upgrading existing 266 26/7 ACSR to 954 45/7 ASCR Rail conductor and replacing 3/8 inch EHS steel shield wire with 7/16 inch EHS steel. Additionally, the contractor is responsible for installing insulators, dampers, crossarms, and X-braces in strict accordance with the stringing charts provided in Section I. To successfully execute the project, the contractor must utilize tensioners and pullers to deliver a fully tensioned conductor and shield wire system. This opportunity falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

Transmission Structure Erection and Pole SettingThis subcontract for the Nebraska Public Power District involves the erection and setting of transmission structures. The scope of work requires the installation of 28 wood H-Frame tangent structures and one steel monopole on a drilled pier. Key technical requirements include backfilling poles with crushed limestone and the installation of ground rods, wire, molding, and staples, with ground impedance testing performed according to specific technical drawings. The contractor is responsible for providing all necessary pole setting equipment and drilling rigs to deliver fully assembled and set structures. This project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

115kV Transmission Line 1266 Rebuild Stanton North Substation to Dead-End Structure 79

Solicitation # 26-012

Nebraska Public Power District is soliciting sealed bids for Contract No. 26-012 to rebuild approximately 4.05 miles of the 115kV transmission line 1266, extending from the Stanton North substation to Dead-End Structure 79. The scope of work requires the contractor to provide all labor, supervision, equipment, and miscellaneous materials to replace all structures, conductors, shield wires, and hardware. Key technical deliverables include the installation of 28 wood H-Frame tangent structures and one tubular steel monopole dead-end on a drilled pier, upgrading the conductor to 954 kcmil 45/7 ASCR Rail, and installing 0.551 diameter fiber optic ground wire and EHS steel shield wire. The project also involves tree clearing, site preparation, and the removal of existing structures and conductors. Bids are due by 2:00 p.m. CST on December 2, 2026, and must be submitted as sealed hard copies to the Procurement Department in Columbus, Nebraska. The award will be based on the lowest cost and best bid, with evaluation factors including technical conformance, schedule capability, financial standing, and past performance history. Prospective bidders are encouraged to attend an optional pre-bid teleconference and site visit on November 23, 2026. Required submission documents include a signed proposal page, a completed price quotation table, a W-9 form, and bid security in the form of a certified check, irrevocable letter of credit, or bid bond. The successful contractor must provide a performance bond and maintain workers compensation and commercial general liability insurance.

Nebraska Public Power District

POSTED

DEADLINE

RFP No. 27-05: Demolition, Development, Construction & Lease of a Telecommunications Tower Facility

Solicitation # BD-27-1158-NBPT3-NBPT3-134879

The City of Newburyport is soliciting proposals under RFP No. 27-05 for the design, permitting, financing, construction, ownership, operation, and maintenance of a telecommunications tower facility. Located at 1 Plum Island Point Road in Newburyport, Massachusetts, the project aims to improve broadband infrastructure, public safety communications, and emergency response reliability on Plum Island and surrounding coastal areas. The selected vendor will be responsible for constructing a facility capable of supporting multiple carriers and city public safety equipment, relocating existing safety equipment, and demolishing the current tower on the premises. This solicitation, identified as BD-27-1158-NBPT3-NBPT3-134879, was posted on October 28, 2026, with a response deadline of November 20, 2026, at 4:00 PM. Interested qualified telecommunications infrastructure developers, wireless carriers, or tower management companies must submit their proposals by the deadline, as electronic quotes are not permitted. Tom Watkins serves as the primary point of contact and purchaser for the project. An optional pre-proposal site visit was scheduled for November 5, 2026.

POSTED

DEADLINE

MBE, WBE and SDVOB Contracting Opportunity

Solicitation # 2140303

L3Harris Technologies has been contracted by the New York State Thruway Authority to implement a new Land Mobile Radio system across 54 communications sites along the Thruway corridor, extending from Buffalo to New York City. This system is designed to support essential personnel performing roadway maintenance, road repair, and snow removal. The project involves significant site-level work, including pouring concrete for antenna towers, shelters, and generators, providing New York certified concrete testing services, installing antennas and coaxial cables with sweep testing, and performing electrical work such as installing power conduits, grounding components, transfer switches, electrical panels, and site fences. L3Harris is seeking qualified lower-tier subcontractors to support these efforts, with specific socioeconomic goals of 15 percent for Minority-Owned Businesses, 15 percent for Women-Owned Businesses, and 6 percent for Service-Disabled Veteran-Owned Businesses. Interested parties must submit their company and contact information, a brief description of capabilities, and a NYSTA Certified Vendor Number to Program Manager Daniel Voiland by December 10, 2026. An executed Non-Disclosure Agreement will be required before project plans are released for review.

New York

POSTED

2 days ago

DEADLINE

in about 1 month

AI Contract Overview

This contract, solicitation number W912ES-10-T-0124, is a 100 percent HUBZone small business set-aside issued by the Department of Defense through the US Army Corps of Engineers St Paul district. The project requires the design, installation, and eventual removal of a temporary 15KV three phase electrical distribution system with a capacity of 950 Kilovolt amperes to support winter maintenance dewatering at Lock and Dam No. 10 near Guttenberg, Iowa. The system must be operational by December 7, 2010, and installation must not interfere with lock operations during the navigation season ending December 6, 2010. The scope of work includes providing a temporary metering system and three transformers with capacities of 300, 500, and 150 Kilovolt amperes, located at specific field-determined sites on the intermediate and land walls. The contractor is responsible for all primary and secondary connections, utilizing inner duct steel or PVC conduit for cable protection based on traffic and operational hazards, and installing voltage hazard warning tapes. Requirements include submitting a design and installation plan, providing certifications for medium voltage cable installers with at least three years of experience, and adhering to ANSI, NFPA, and USACE safety standards. Upon completion of the dewatering project, the contractor must remove all equipment and restore the site to its original state.

General Info

Agency

Department Of Defense → W07V Endist St Paul

Contract Value

$108,835

NAICS

237130 - Power and Communication Line and Related Structures Construction

Place of Performance

Lock and Dam 10 5 Lock and Dam Lane Guttenberg IA 52052 US, MN, USA

Set-Aside

NONE

Awardee

MID STATES ELECTRIC CO.

Award Issued Date

10/14/2010, 12:00:00 AM UTC

Documents

Proposed Electrical Equipment Locations - Sheet E-001

specifications

High

RFQ W912ES-10-T-0124: Lock and Dam 10 Temporary Electrical Distribution System

15 pages · rfq

High

Solicitation W912ES-10-T-0124

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedSep 20

Combined Synopsis

Notice updatedSep 23

Response deadline changed from Sep 27, 2010 to Oct 1, 2010. The notice description changed. The point of contact changed.

AwardedOct 14

Contract was awarded

Submission Closed

10/18/2010, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W07V Endist St Paul

Contacts2 people available

OfficeSAINT PAUL, MN, 55101-1323, USA

Organization / AgencyDepartment Of Defense → W07V Endist St Paul

Office AddressSAINT PAUL, MN, 55101-1323, USA

Contacts

Christopher G. Dake

contact@example.gov

+1 (555) 000-0000

Patrick MallyCONTRACTING OFFICER

contact@example.gov

+1 (555) 000-0000

Full Description

This modification extends the response date to 01 OCT 2010 at 4 pm CST; it also adds Clause 52.232-18 Avaialability of Funds. Please see attached modification document. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. LOCK 10 DEWATERING ELECTRICAL SERVICE SCOPE SCOPE OF WORK 1.0 GENERAL: The contractor shall design and install a temporary 15KV (13,800 Volts, three phase) electrical distribution system for Lock and Dam No. 10 winter maintenance dewatering. The contractor shall remove the temporary electrical distribution system at the completion of the dewatering project as directed by the Government. The existing utility company is the Municipal Department of Guttenberg, Guttenberg, IA, and their technical point of contact is Jeff Mohs +1 (555) 000-0000. Capacity of the electrical service shall be 950 Kilovolt amperes. The Contractor shall coordinate with Government the installation of temporary electrical system. The system shall be in-place and operational by December 7, 2010. The contractors work shall not interfere with lock operations, the lock shall remain in operation until the end of the 2010 navigation season which ends December 6, 2010 and starts March 14, 2011. The system shall include the following features: Provide and install a temporary metering system as required by the local utility company. Provide and install one (1) temporary 300 Kilovolt ampere transformers 13,800/480/277 volt, three phase; transformers shall be located on the intermediate wall after the upstream tainter gate machinery, exact location shall be field determined in conjunction with the Government. Provide and install one (1) temporary 500 Kilovolt ampere transformers 13,800/480/277 volt, three phase; transformers shall be located on the intermediate wall forward the downstream tainter gate machinery, exact location shall be field determined in conjunction with the Government. Provide and install one (1) temporary 150 Kilovolt ampere transformers 13,800/480/277 volt, three phase; transformer shall be located on the land wall by the upstream tainter gate machinery. The exact location shall be field determined in conjunction with the Government. Provide all primary and secondary connections to the transformers. Provide a means of protecting the 15 kilovolt cable as follows and as codes and regulations require: Where vehicle traffic will cross over the 15 KV cable, the 15 KV cable shall be installed in inner duct steel conduit. Where the 15 KV cable crosses the lock chamber, the 15 KV cable shall be installed in inner duct steel conduit. All 15 KV cable in the vicinity of crane operation shall be installed in inner duct PVC conduit. In foot traffic areas the 15KV cable shall be installed in inner duct PVC conduit. Where the 15 KV is exposed and accessible, the contractor shall provide a warning tape indicating the presence of a Voltage Hazard. The contractor shall be permitted to install the 15 KV cable in existing cable raceways as approved by the Contracting Officer and as allowed by codes and regulations. The contactor shall notify the Government 7 days in advance for any assistance required by the government for locating contractor equipment and materials. After the winter maintenance dewatering is completed and as directed by the Government, the contractor shall remove the temporary 15 kilovolt system and all associated equipment and cabling. The contractor shall repair damages caused by the contractors installation and removals to its original state or better as approved by the Government. 2.0 Certification of Qualifications: The Contractor shall submit the Certification of the qualifications of the Medium Voltage Cable Installers. Certification of the qualifications of the Medium Voltage Cable Installers shall indicate that the persons recommended performing actual splicing and terminations have been adequately trained in the proper techniques, and shall have had at least three recent years of experience in splicing and terminating the same or similar types of cables approved for installation. 3.0 APPLICABLE PUBLICATIONS: The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by basic designation only. American National Standard (ANSI). ANSI C2 National Electrical Safety Code (Latest edition). National Fire Protection Association (NFPA) Publications: NFPA 70 National Electrical Code (Latest edition). US Army Corps of Engineers (USACE) EM 385-1-1 USACE Safety and Health Requirements Manual (Latest Edition) 4.0 SUBMITTALS. The Contractor shall submit to the Government for approval, certifications (para 2.0) the design, installation plan and schedule for the installation of the temporary 15 KV electrical service as part of the contractors proposal.