Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

A -- Spacecraft Electric Propulsion Power Processing Unit Technology Transfer

Active
RFI-05-01-PKPAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Air Force Research Laboratory's Propulsion Directorate, Power Division, Electrical Technology and Plasma Physics Branch is seeking to identify transition opportunities for power electronics technologies applicable to spacecraft propulsion systems. The request for information (RFI) is aimed at facilitating technology transfer related to the development of electric propulsion power processing units for spacecraft. Interested parties are required to submit their information or documentation packages to the designated contracting office by 3:00 pm Eastern Standard Time on August 15, 2005, noting that the response due date has been updated. This solicitation, identified as RFI-05-01-PKPA, is issued by the Department of Defense office located at Wright Patterson Air Force Base, Ohio. The key point of contact for this initiative is Mary I. Lykins, the contract negotiator, who can be reached via email or phone for further information. The focus of this effort is to leverage technological advancements in power electronics to enhance propulsion capabilities, with the ultimate goal of transitioning these technologies into operational spacecraft systems.

General Info

Air Force seeks power electronics tech info for spacecraft propulsion; responses due August 15, 2005.

Agency

Department Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

Place of Performance

OH

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl
Contacts1 person available
OfficeWRIGHT PATTERSON AFB, OH, 45433-7541, USA
Organization / AgencyDepartment Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl
Office AddressWRIGHT PATTERSON AFB, OH, 45433-7541, USA
Contacts
Mary I LykinsContract Negotiator
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
17. The Air Force Research Laboratory, Propulsion Directorate, Power Division, Electrical Technology and Plasma Physics Branch (AFRL/PRPE) is seeking transition opportunities for power electronics technologies in the area of spacecraft propulsion. The response due date is changed. Information/documentation packages are due to the contracting office identified in the attached document by 3:00 pm Eastern Standard Time 15 August 2005

Similar Contracts

Same NAICS industry code

NAICS: 541715
New
Federal
U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)
Solicitation # W911PT26SC001
The U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) has issued solicitation W911PT26SC001, a Commercial Solutions Opening (CSO) open continuously until September 30, 2027. This competitive solicitation seeks innovative commercial products, technologies, and services to modernize the Organic Industrial Base (OIB) for Watervliet Arsenal and Benet Laboratories. The primary objective is to integrate manufacturing resources across the enterprise, focusing on linking legacy analogue systems with digital systems, expanding modeling and simulation, and improving the delivery of materiel to soldiers. The CSO is structured around specific Areas of Interest (AoIs) that address diverse needs, including advanced cannon technology, electronic access control systems, electrical infrastructure improvements, automated manufacturing for cannon components, and facility conversions. The acquisition process follows a multi-phased approach consisting of a written solution brief, an optional presentation or pitch, and a final request for a Commercial Solution Proposal (CSP). Evaluation is based on responsiveness, technical merit, uniqueness, and price reasonableness. Successful responses may result in fixed-price contracts awarded under FAR Part 12 Commercial Item Procedures. Eligible participants include traditional and non-traditional business entities, including small businesses and foreign-owned businesses, provided they maintain an active SAM registration and a Unique Entity ID. All submissions must remain unclassified and are evaluated individually against the specific requirements of the applicable Area of Interest.
W6QK Acc Wva

POSTED

about 2 hours ago

DEADLINE

in 12 months
View Details
NAICS: 541715
New
International
Silviculture Growth & Yield Modelling Specialist
Ministry of Forests

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541715
New
SLED
Mental Health Screening Tool Array Design
COMRESSERVAUTH586 - Community Residential Services Authority

POSTED

about 21 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541715
New
Federal
Thermal Performance & Dielectric Testing Laboratory
FA8611 Aflcmc Wauk F22

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541715
New
Federal
Clinical Trial Management (Phase I/II)
W6QK Acc-Apg

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 541715
New
Federal
Biopharmaceutical Platform Design & Development
W6QK Acc-Apg

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 541715
New
Federal
HERMES BAA CALL: Rotating Detonation Rocket Engine-Combined Cycle (RDRE-CC) Flight Demonstration
Solicitation # FA9300-20-S-0001-CALL-RDRE-CC
The Air Force Research Laboratory Rocket Propulsion Division is seeking innovative research and development to advance Rotating Detonation Rocket Engine-Combined Cycle propulsion systems from Technology Readiness Level 3 to TRL 6. This effort aims to culminate in a ground-launched, sounding-rocket-boosted flight demonstration to support future High-Speed Affordable Mass Munitions. The anticipated period of performance for awarded contracts is between 36 and 48 months. This is a two-step solicitation process under the HERMES Broad Agency Announcement. Step one requires the submission of a white paper by November 16, 2026, which must be limited to ten pages with an optional five-page technical appendix. Only offerors with high technical merit will be invited to step two to submit full technical and cost proposals. Due to the sensitive nature of the technology, detailed requirements are restricted to U.S. Government agencies and vetted contractors with an active Joint Certification Program registration and a valid CAGE code.
FA9300 Aftc Pzr

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 541715
New
Federal
CY28 FFP Services
Solicitation # SN-27-0002
The Space Development Agency intends to issue a sole source, firm-fixed-price contract modification to SpaceX to maintain a satellite processing and integration facility in Santa Barbara, California. This facility is designed to accommodate up to 21 satellites and their associated dispenser hardware, providing essential services including post-transport functional testing, mechanical and electrical mating, and integrated payload stack encapsulation. The modification is expected to be awarded in December 2026 with an estimated value of 15,000,000 dollars, extending the period of performance for one year. This action is being taken under the authority of FAR 6.302-1, as SpaceX is identified as the only responsible source capable of satisfying the agency's requirements. This notice is for informational purposes and is not a request for competitive proposals.
FA2401 Space Development Agency Sda

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541715
New
Federal
L-PBF Development of ODS Alloys for Recording Methane/Oxygen Combustion Properties
Solicitation # 80NSSC27946801Q
The NASA Shared Services Center is seeking capability statements for a project focused on the laser powder bed fusion (L-PBF) development of oxide dispersion strengthened (ODS) and burn-resistant nickel-based alloys, including GRX-810, GRX-810+, and GRX-900. The scope of work involves advanced process development and parameter optimization using an EOS M280 system to achieve a relative density of 99.9 percent or higher. Key requirements include the production of test coupons and representative components, the supply of at least 600 kg of GRX-810 powder, and strict adherence to NASA-STD-6030 for mechanical validation. All deliverables must be shipped to the Marshall Space Flight Center in Huntsville, Alabama. This procurement is being conducted as a commercial items or services acquisition under FAR Part 12, with NAICS code 541715. NASA intends to issue a sole source contract to North American Manufacturing Pros LLC under FAR 12.102(a); however, the agency is requesting capability statements from other interested organizations to determine if the procurement should be conducted on a competitive basis. Interested parties must submit their qualifications to the primary point of contact, Cara Craft, by October 22, 2026. The contract requires rigorous documentation, including real-time reporting of anomalies and full powder traceability certifications covering chemical composition and particle morphology.
NASA Shared Services Center

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 541715
New
Federal
Prototype development for Battlefield Wound Infection Prevention and Treatment (BWI P&T) Barrier Combination
Solicitation # HT9427-26-R-E020
The Defense Health Agency Contracting Activity is seeking proposals for the development of a Battlefield Wound Infection Prevention and Treatment Barrier Combination prototype. This product must integrate a physical wound barrier with antimicrobial and antifungal properties to prevent systemic infections in combat scenarios. The project aims to advance the technology to a Technology Readiness Level of 7 or 8, requiring the development of a working prototype, the execution of human clinical trials, and the successful submission for FDA approval or clearance. The final product must be individual, compact, waterproof, and maintain sterilization, with a preference for packaging that allows one-handed opening in low-light environments. This effort is being conducted under the prototype Other Transaction Authority 10 U.S.C. 4022, meaning it does not follow standard FAR-based procurement. To be eligible, offerors must be nontraditional defense contractors, small businesses, or provide significant cost-sharing. The estimated period of performance is 48 months, divided into three objectives: prototype demonstration, clinical studies and regulatory submissions, and final FDA clearance. Proposals will be evaluated based on technical capability, management capability, and cost, with payments processed electronically via Wide Area Workflow. All clinical research must comply with Good Laboratory, Manufacturing, and Clinical Practices, and be approved by relevant Institutional Review Boards and the USAMRDC Office of Human and Animal Research Oversight.
Defense Health Agency

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 541715
New
Federal
Request for Information – Prophylactic Platform for Medical Countermeasures
Solicitation # W911SR27SPPFC
The Department of Defense, through the Portfolio Management Executive for Chemical, Biological, Radiological and Nuclear Defense (PME CBRND) and the Accelerated Defense Pharmaceuticals (ADP) program, is issuing a Request for Information (RFI) under solicitation W911SR27SPPFC. The objective is to identify capable companies that can advance the development of prophylactic medical countermeasures (MCMs) using existing platform technologies. The program focuses on progressing these countermeasures through Phase I or Phase II clinical trials, with a goal of enabling interim fielding via Expanded Access Protocols or pre-Emergency Use Authorization. The anticipated period of performance is up to four years, with work primarily conducted at the contractor's facilities. Interested respondents must provide a comprehensive capability description, including technical approach, regulatory status with the FDA, cGMP manufacturing capabilities, and a development roadmap with rough order of magnitude cost estimates. Evaluation criteria for future selections will emphasize manufacturing process capability, product safety and efficacy, past FDA experience, and the plug-and-play nature of the platform across various pathogens. Submissions must be delivered as a single searchable PDF, featuring a specific cover page and a core capability description not exceeding four pages. All non-clinical and clinical data must be SEND and CDISC compliant, and manufacturing must adhere to cGMP standards to support an Investigational New Drug application through a Biologics License Application.
W6QK Acc-Apg

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 541715
New
Federal
ARMY OPEN SOLICITATION (AOS)
Solicitation # W9128Z-25-S-A002
The Army Open Solicitation (AOS), solicitation number W9128Z-25-S-A002, is an indefinite open solicitation issued by the U.S. Army Contracting Command-Aberdeen Proving Ground (ACC-APG) Digital Capability Contracting Center of Excellence. Its primary objective is to support all Army mission areas and maximize Army lethality by rapidly acquiring innovative commercial technologies, research and development solutions, and software acquisition pathway procurements. The AOS leverages a broad range of authorities, including FAR 6.102(d)(2), FAR 35.016 Broad Agency Announcements, and various 10 U.S.C. sections for prototypes and experimental procurements, as well as the Commercial Solutions Opening (CSO) process. Interested parties can engage through two primary methods: responding to Active Capability Gaps (ACG) or submitting proposals in response to specific Calls for Solutions. The award process generally follows a multi-phase approach consisting of a Solution Brief, a Live Pitch, and a final Solution Proposal. Evaluation is based on a hierarchy of Technical Merit, Viability, Feasibility and Desirability, and Schedule and Price. All submissions must be unclassified, and the government does not reimburse companies for costs incurred during the initial three phases of the solicitation process. Key administrative requirements include mandatory registration in the System for Award Management (SAM) and the use of the Wide Area Work Flow (WAWF) for invoicing. Security requirements mandate that all government data reside within the exclusive legal jurisdiction of the United States. Solution Briefs are strictly limited to five written pages in 12-point font or fifteen briefing slides and must be submitted as a single PDF document. While the overall AOS remains open in perpetuity until canceled, individual Calls for Solutions have specific, limited response windows.
W6QK Acc-Apg Contr Ctr

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl

Same awarding agency

NAICS: 541715
Federal
Vehicle Recompete: ADMIRE — IDIQ ADMIREThe Airman Decision Making Interface and Research (ADMIRE) is an Indefinite Delivery, Indefinite Quantity (IDIQ) contract managed by the Department of Defense with a total ceiling value of 79,640,417.50 dollars. This vehicle focuses on research and development for operator interfaces and aerospace physiology, with the current ordering period set to expire on February 22, 2028. The contract is classified as a full recompete and did not utilize a specific set-aside. Four primary companies hold orders under this vehicle, with DCS Corporation, BAE Systems Space and Mission Systems Inc., and Ball Aerospace and Technologies Corp. managing the workload. Significant task orders include the Responsive Operator-Interface Development and the Intelligent Collaborative and Adaptive Trusted Transparent Teaming Interfaces. DCS Corporation has secured the highest volume of orders, while BAE Systems holds the single highest-value task order.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
AFRL Enterprise CSO: Centralized Open Spiral
Solicitation # FA865226SC005
Solicitation FA865226SC005 is a Centralized, Open Two-Step Spiral issued by the Air Force Research Laboratory under the Defense Commercial Solutions Opening (CSO) framework in accordance with R-DFARS 212.70. The government is seeking Commercial Solutions Brief (CSB) submissions for innovative solutions ranging from advanced component development to operational systems development, specifically limited to Foundational Technologies (AFRL/RE). This procurement follows a two-step process where only CSB submissions are currently requested; offerors must be categorized as Selectable during the Step One evaluation to be invited to Step Two, which involves the submission of a Commercial Solutions Proposal (CSP). The deadline for Step One CSB submissions is 5:00 PM Eastern on April 30, 2027. Submissions must align with the Areas of Interest identified in Attachment 1 of the AFRL Enterprise CSO and follow the formatting instructions in Section 7 and Attachment 2 of the main announcement. While there is no limit on the number of CSBs a single offeror may submit, each must present a unique approach. Submissions should be emailed to afrl.cso.mailbox@us.af.mil, though those containing Controlled Unclassified Information must be transmitted via the DoD SAFE system. This spiral was noted as cancelled effective June 4, 2026, with future spirals transitioning to a decentralized model issued by respective Mission Organizations.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in 6 months
View Details
NAICS: 332999
Federal
Precision Hardware Fabrication and Component SupplyThis subcontract for Precision Hardware Fabrication and Component Supply supports the AFRL Materials and Manufacturing Directorate by providing the supply and fabrication of physical components and prototypes for prime contractors. The scope of work involves manufacturing components according to specific R&D requirements, procuring specialized equipment, and performing precision machining. All deliverables must adhere to DFARS 252.211-7003 standards for Item Unique Identification marking. The contractor is responsible for delivering physical hardware and components along with comprehensive Operations, Maintenance, Installation, and Training data. Managed by the Department of Defense under agency FA8650, the project falls under NAICS code 332999. The contract period extends from the posting date of May 28, 2026, with a response deadline of February 19, 2028.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 332710
Federal
Additive Manufacturing Design and PrototypingThis subcontract, titled Additive Manufacturing Design and Prototyping, focuses on the development and implementation of additive manufacturing technologies for prime contractors supporting AFRL Materials and Manufacturing Directorate projects. The primary objective is to utilize industrial metal and polymer 3D printing equipment and specialized design software to bypass long-lead production times while adhering to airworthiness community standards. The contractor is responsible for delivering additive manufacturing prototypes, technical reports, and Form, Fit, and Function data. This effort is managed by the Department of Defense under the agency FA8650 USAF Afmc Afrl Pzl Afrl/pzl, with a NAICS code of 332710. The opportunity was posted on May 28, 2026, with a response deadline of February 19, 2028.
Machine Shops

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541715
Federal
Advanced Alloys and Materials ResearchThe Advanced Alloys and Materials Research subcontract, issued by the Department of Defense under the USAF AFMC AFRL, focuses on the research and development of conventional and advanced alloys for prime contractors. The project aims to modernize production processes to enhance speed and reduce costs, requiring specialized expertise in metallurgy and material science. The contractor is responsible for delivering material characterization data and scientific and technical reports as specified by CDRL A001. This opportunity falls under NAICS code 541715, with a response deadline of February 19, 2028.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541611
Federal
Technical Documentation and CDRL ManagementThis subcontract, titled Technical Documentation and CDRL Management, supports the AFRL Materials and Manufacturing Directorate by providing formal documentation and delivery of scientific and technical data for prime contractors. The scope of work involves formatting reports according to ANSI/NISO guides and managing DD Form 1423-1 Contract Data Requirements List submissions. Success in this role requires specialized expertise in technical writing and adherence to SF 298 standards to ensure the delivery of final scientific and technical reports. The opportunity is issued by the Department of Defense under the agency FA8650 USAF Afmc Afrl Pzl Afrl/pzl and is categorized under NAICS code 541611. It was posted on May 28, 2026, with a response deadline of February 19, 2028.
Administrative Management and General Management Consulting Services

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541511
Federal
Manufacturing Optimization & Digital Twin SoftwareThis subcontract opportunity with the Department of Defense, specifically for the USAF AFMC AFRL, focuses on the development of computer software to support digitalized conventional production and schedule optimization for prime contractors within the AFRL Materials and Manufacturing Directorate. The project requires specialized expertise in software engineering and digital manufacturing integration to create platform-agnostic manufacturing tools and digital twins. The selected provider will be responsible for delivering comprehensive computer software, including all relevant source code and technical documentation. This effort falls under NAICS code 541511 and has a response deadline of February 19, 2028.
Custom Computer Programming Services

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541715
Federal
Endless Forge
Solicitation # FA2394-26-R-B003
Endless Forge is a Manufacturing as a Service initiative led by the Air Force Research Laboratory Materials and Manufacturing Directorate to establish an adaptive, scalable, and resilient production network for the US industrial base. The program aims to shift from sequential value chains to regionalized production networks, enabling the Department of the Air Force to rapidly scale weapon systems based on battlefield performance. With a total estimated program cost of 149 million dollars and multiple awards anticipated, the solicitation focuses on two primary Areas of Interest: technology sprints to reduce risk in enabling technologies like digital certification and software-defined manufacturing, and a technology demonstration to validate the concept across domains such as space systems and autonomous platforms. This unrestricted solicitation, number FA2394-26-R-B003, utilizes a two-step process requiring a five-page white paper followed by a full proposal for selected offerors, with a response deadline of February 19, 2028. Anticipated contracts include Other Transaction for Prototype and Cost Plus Fixed Fee types, with a technical performance period of 33 months. Key requirements include strict adherence to security risk reviews for key personnel to mitigate foreign influence, compliance with NIST SP 800-171 and CMMC cybersecurity standards, and the use of the Wide Area Workflow system for invoicing. Deliverables encompass research and development data, scientific and technical reports, and hardware prototypes that must meet MIL-STD-130 unique item identification and MIL-STD-129 packaging standards.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541380
Federal
Materials Characterization and Property ScreeningThis subcontract, titled Materials Characterization and Property Screening, involves performing physical testing and characterization of advanced structural materials under extreme conditions to support prime contractors on Air Force Research Laboratory projects. The scope of work includes screening material properties against variables such as temperature, environment, stress, and time, with a specific focus on testing elastic-viscoplastic deformation across various stress and strain rates. Technical execution requires the use of specialized equipment, including SEM, TEM, XRD, and high-temperature tensile testers, to produce characterization data sets, test reports, and material property maps. Managed by the Department of Defense under the USAF AFMC AFRL PZL, the work is to be performed at Wright Patterson AFB. The opportunity is categorized under NAICS code 541380. The solicitation was posted on April 22, 2026, with a response deadline set for September 20, 2027.
Testing Laboratories and Services

POSTED

6 months ago

DEADLINE

in 11 months
View Details
NAICS: 326199
Federal
Structural Polymer Matrix Composite DevelopmentThis subcontract, titled Structural Polymer Matrix Composite Development, supports prime contractors on Air Force Research Laboratory projects under the Department of Defense. The scope of work involves the development of computational tools and disruptive processing methods for structural polymer matrix composites, with a specific focus on simulating manufacturing processes and performing nanomaterials fabrication. Additionally, the project integrates multifunctional materials designed for structural directed energy hardening through the application of polymer chemistry and composite manufacturing techniques. The contract requires the delivery of new processing methods, fabricated samples, and simulation tools. Performance will take place at Wright Patterson AFB. The opportunity was posted on April 22, 2026, with a response deadline of September 20, 2027, and is categorized under NAICS code 326199.
All Other Plastics Product Manufacturing

POSTED

6 months ago

DEADLINE

in 11 months
View Details
NAICS: 541330
Federal
Integrated Computational Materials Science and Engineering (ICMSE) ServicesThis subcontract for Integrated Computational Materials Science and Engineering (ICMSE) Services supports prime contractors on Air Force Research Laboratory projects. The scope of work involves developing and implementing validated computational methods to link processing, microstructure, and performance. Key technical requirements include advancing finite element modeling, creating constitutive descriptions for deformation, and simulating microstructural evolution and thermo-mechanical processing. The contractor is responsible for performing multi-scale verification, validation, and uncertainty quantification to deliver functional software code and computational tools. This effort is managed under the Department of Defense for the USAF AFMC AFRL, with the place of performance located at Wright Patterson AFB. The solicitation was posted on April 22, 2026, with a response deadline of September 20, 2027.
Engineering Services

POSTED

6 months ago

DEADLINE

in 11 months
View Details
NAICS: 541715
Federal
Advanced Ceramics and CMC Materials DevelopmentThe Advanced Ceramics and CMC Materials Development subcontract focuses on the research and development of high-temperature constituents for fiber-reinforced ceramic-matrix composites. Supporting prime contractors on Air Force Research Laboratory projects, the work involves creating next-generation structural ceramic materials and processing models specifically for hypersonic vehicle thermal protection systems and hot-section components in turbine and scramjet engines. The scope of work includes characterizing material properties based on stress, time, environment, and temperature to deliver validated process reports. This Department of Defense initiative is managed under the USAF AFMC AFRL and is performed at Wright Patterson AFB. The solicitation period remains open for responses until September 20, 2027.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

6 months ago

DEADLINE

in 11 months
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS