Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Government of Canada was posted on October 20, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ACAN – SYSTEC HX430 AUTOCLAVE SERVICE COVERAGE AND PREVENTATIVE MAINTENANCE SUPPORT PLAN

Closed
01R11-23-C064International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 13 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Transit Administration is soliciting bids for a firm fixed price contract to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts primarily located in Baltimore City. The scope of work includes full maintenance and repairs to ensure equipment operates at original contract speeds and remains in safe, first-class condition. Key deliverables include a minimum of four on-site team hours per escalator monthly for preventative maintenance, semi-annual and annual deep cleaning of units, and strict adherence to ASME A17.1 and A17.2 safety codes. The contract features a five-year base period with no options and requires the contractor to provide certified mechanics, maintain emergency service capabilities, and adhere to Maryland Living Wage requirements. Award will be made by lot to the responsible bidder offering the most favorable price. The solicitation establishes a 17 percent Minority Business Enterprise (MBE) participation goal and a 1 percent Veteran-Owned Small Business Enterprise (VSBE) goal. Required submissions include a Project Execution Plan, performance bonds, and various certifications regarding conflict of interest and non-disclosure. Invoicing is handled via email to the Contract Monitor and Accounts Payable, with a specific allowance of 600,000 dollars provided for parts, materials, and sub-work. All work must comply with federal, state, and local laws, including ADA requirements for intercom systems and strict regulations regarding the handling and disposal of PCBs.
Maryland Transit Administration

POSTED

about 15 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
26WS0011-Floor Care Equipment Preventative Maintenance and Repair Services
Solicitation # 26WS0011
Solicitation 26WS0011 is issued by the California Department of Veterans Affairs (CalVet) for a contractor to provide comprehensive preventative maintenance, inspection, repair, and operational support for commercial floor care equipment in Los Angeles, California. The scope of work covers a fleet of carpet extractors, auto scrubbers, floor machines, and specialty vacuums. The contractor is responsible for providing all necessary labor, materials, and transportation, though consumable supplies like chemicals and batteries are excluded unless specifically authorized. Key performance standards include a two-hour onsite response for emergencies, a one-business-day response for non-emergencies, and a 100% completion rate for scheduled preventative maintenance. The contract will be awarded to the lowest responsible bidder, with a five percent preference given to certified Small or Micro businesses and a priority award to Disabled Veteran Business Enterprises (DVBE) in the event of a tie. Bidders must submit their proposals via email by November 16, 2026, including a completed Rate Sheet, Bidder Certification form, and a valid California business license. The contractor must maintain a Commercial General Liability insurance policy of at least $1,000,000 per occurrence and employ qualified technicians. Payment is processed through monthly invoices submitted to the CalVet Contract Manager, with a $10,000 withholding from the final payment for prime contractors until DVBE subcontracting reports are certified.
California Department of Veterans Affairs

POSTED

about 15 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

Agriculture and Agri-Food Canada intends to award a service contract for the maintenance and support of a Systec HX430 Autoclave located at the Lacombe Research and Development Centre in Alberta. The contract covers a three-year period from December 15, 2022, to December 14, 2025, with an estimated value of 32,550.00 USD. The required services include a Bronze Service Contract featuring one annual on-site preventative maintenance visit, one annual emergency repair visit, and yearly calibration services. Microbiology International is the pre-identified supplier due to the proprietary nature of the equipment and their exclusive ability to provide guaranteed coverage. This procurement is being handled as an Advance Contract Award Notice, allowing other suppliers to submit a Statement of Capabilities by November 3, 2022, to demonstrate they possess the necessary exclusive licensing and experience in steam and pressure vessels. If no qualifying alternative supplier is identified, the contract will be awarded to Microbiology International to ensure the safe decontamination of biohazardous materials.

General Info

Three-year Systec autoclave maintenance contract for Agriculture Canada, valued at 32,550 USD.

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Agriculture and Agri-Food Canada
Contacts1 person available
OfficeN/A
Office AddressN/A
Contacts
Melissa SmithPoint of Contact

Full Description

Show more
This Advance Contract Award Notice (ACAN) is a public notice indicating to the supplier community that Agriculture and Agri-Food Canada intends to award a service contract to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a Statement of Capabilities. If no supplier submits, a Statement of Capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in this ACAN, the Contracting Officer may then proceed with the award to the pre-identified supplier.REQUIREMENT:The Lacombe Research and Development Centre in Lacombe, Alberta requires Service Coverage and Preventative Maintenance Support for their Systec HX430 Autoclave (S/N: HX0122). The Contractor shall provide the following Service Coverage and Preventative Maintenance Support and undertake the following to service and maintain the equipment:1. The Bronze Service Contract includes:a) One (1) Annual On-site Preventative Maintenance Visit including parts and labor for the preventative maintenance procedure, travel and software upgrades, and 20% off repair parts if it is determined these are needed.b) One (1) On-site Repair Visit per year, if needed for Emergency Repair Service (travel and labor included) and 20% off repair parts.2. Calibration Service to be performed yearly at time of other scheduled service visit.CRITERIA FOR ASSESSMENT OF THE STATEMENT OF CAPABILITIES:Any interested supplier must demonstrate by way of a Statement of Capabilities that they have an exclusive license and the experience in steam/pressure vessels to service and maintain Systec HX430 Autoclaves on behalf of Microbiology International.CONTRACT PERIOD: December 15, 2022 to December 14, 2025ESTIMATED VALUE: $32,550.00 USDPRE-IDENTIFIED SUPPLIER:Microbiology International5350 Partners CourtFrederick, MD 21703United StatesSOLE SOURCE JUSTIFICATION:Microbiology International is the only company that can provide guaranteed equipment coverage and servicing for this equipment. The equipment is proprietary to Microbiology International. The equipment is a very expensive piece of equipment that is necessary to support ongoing research in food safety which requires the decontamination of biohazardous materials. The Autoclave must operate properly and effectively for the safety of staff, the public and the environment; therefore a service and preventative maintenance contract is required. By obtaining these services, AAFC will receive continuous service and support by qualified technicians with experience in steam/pressure vessels in order to keep this equipment running properly and safely.Government Contracts Regulations Exception and Limited Tendering Reason:Section 6 (d) has been invoked for this procurement as only one supplier (person/firm) is capable of performing the contract.Where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists.ACAN NOTICE:You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the Contracting Authority.An ACAN allows departments and agencies to post a notice, for no less than 15 calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a "Statement of Capabilities" that meets the requirements set out in the ACAN, the Contracting Authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the Contracting Authority will proceed to a full tendering process.STATEMENT OF CAPABILITIES CLOSING DATE AND TIME:The closing date and time for acceptance of Statement of Capabilities is November 3, 2022 at 2:00 pm CST.Suppliers who consider themselves fully qualified and available to provide the services described herein, may submit a Statement of Capabilities by email to the contact person identified in this notice, on or before the closing date of this notice. The Statement of Capabilities must clearly demonstrate how the supplier meets the advertised requirements.The Solicitation Number, Name of Contracting Authority and closing date of the ACAN must appear within your Statement of Capabilities in block letters.The Crown retains the right to negotiate with suppliers on any procurement.CONTRACTING AUTHORITY:Melissa Smith, Contracting SpecialistAgriculture and Agri-Food CanadaWestern Service Centre300 – 2010 12th AvenueRegina, SK S4P 0M3Phone: 306-515-4796Fax: 306-780-5018Email: contact@example.gov

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS