Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Inspection and Testing

Active

Federal

Response Deadline11/11/2026, 05:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aerospace Component Inspection and Testing subcontract involves providing quality assurance testing for prime contractors on Department of the Air Force projects. The scope of work requires the use of non-destructive testing equipment to perform X-ray, Ultrasonic, Magnetic Particle, or Dye Penetrant inspections to ensure structural integrity and the absence of defects. All personnel must hold NAS 410 or equivalent NDT certification to deliver the required inspection reports and certifications of conformance. This opportunity is managed by the Ok DLA Aviation At Oklahoma City under the Department of Defense, falling under NAICS code 541380. The solicitation was posted on November 3, 2026, with a response deadline of November 11, 2026.

General Info

NDT quality assurance testing for Air Force aerospace components requiring NAS 410 certification.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

541380 - Testing Laboratories and Services

Place of Performance

OK, USA

Set-Aside

NONE

Documents

This scope was carved out of FD20302700562.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STABILIZER,HORIZONT_End_Item_KC-135_NSN_1560009694278FL_PN_KC3-10000-3

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 11

Submission deadline

Response Deadline

11/11/2026, 05:59:00 AM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs quality assurance testing for prime contractors on Department of the Air Force projects. Conducts X-ray, Ultrasonic, Magnetic Particle, or Dye Penetrant inspection using NDT equipment to verify structural integrity and absence of defects. NAS 410 or equivalent NDT certification required. Delivers inspection reports and certifications of conformance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors delivering supply contracts for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves executing the Production Lot Test Requirement defined in CLIN 0002, which requires the use of specialized aviation and defense wiring diagnostic equipment to verify branching integrity, insulation, and electrical continuity. All testing must be conducted within a laboratory meeting ISO/IEC 17025 certified standards. The successful contractor is responsible for providing a certification of compliance and a certified test report upon completion. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) for Electrical ConnectorsThis subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the performance of First Article Testing for electrical connectors. The selected contractor will conduct initial quality and performance validation on the first production unit to ensure full compliance with technical specifications. This process involves coordinating with the Engineering Support Activity and utilizing specific testing and measurement equipment in accordance with quality conformance inspection RQ006 and configuration change management RQ002. The final deliverables for this effort include a comprehensive FAT Report and a validated sample. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in San Diego, California. Interested parties must submit their responses by November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Annual Hose Testing

Solicitation # 358

The Jefferson Parish Government is soliciting bids for a two-year contract to provide annual hydrostatic hose testing for the Jefferson Parish East Bank Consolidated Fire Department. The contractor is responsible for providing all labor, equipment, materials, and supervision to perform visual inspections and hydrostatic pressure testing on 45,700 feet of 1-3/4 inch hose, 42,640 feet of 2-1/2 inch hose, and 63,550 feet of 4 inch hose. All services must be performed at the Fire Training Center in Bridge City, Louisiana, in strict compliance with NFPA 1962 standards and departmental requirements. The scope includes the removal, testing, and reloading of all in-service and spare hoses, with testing conducted on consecutive days, weather permitting. The selected vendor must provide detailed test reports and proper tagging for each hose section, identifying the specific apparatus and location or spare storage site. Award will be granted to the lowest responsive and responsible bidder. To be considered responsive, bidders must submit all required insurance documentation, as failure to provide final insurance certificates within ten calendar days of the bid opening will result in rejection. All insurance must conform to Jefferson Parish Resolution No. 136353 or No. 141125, and coverage must be maintained throughout the contract term to avoid suspension or termination. Scheduling for these services is coordinated through Richard Parker.

Jefferson Parish Government

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NDT (Non-Destructive Testing) and Quality InspectionThis subcontract for NDT and Quality Inspection involves the inspection and testing of manufactured trailing edges for prime contractors supporting DLA Aviation projects under the Department of Defense. The scope of work requires the execution of X-ray, ultrasonic, and coordinate measuring machine inspections in strict accordance with Manufacturing Qualification Requirements. To ensure compliance and quality, the contractor must adhere to AS9100 quality standards and maintain NADCAP accreditation for all special processes. Final deliverables for this engagement include detailed inspection reports and certifications of conformance. The response deadline for this opportunity is December 4, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aerospace Engineering and Technical Data AcquisitionThis subcontract for Aerospace Engineering and Technical Data Acquisition supports prime contractors on DLA Aviation projects managed by the Department of Defense at Ok DLA Aviation in Oklahoma City. The scope of work involves performing engineering analysis, independent technical data acquisition, and design analysis. The contractor is responsible for developing manufacturing processes to satisfy Source Approval Requests using CAD/CAM software and coordinating with the Tinker Engineering Drawings Public Sales Desk to deliver final technical data packages. The opportunity is categorized under NAICS code 541330. It was posted on November 3, 2026, with a response deadline of December 4, 2026.

Engineering Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aerospace Grade Alloy/Composite SupplyThis subcontract involves the procurement and delivery of certified aerospace-grade raw materials, including metals and composites, for prime contractors working on DLA Aviation projects under the Department of Defense. The supplier is responsible for ensuring all materials strictly adhere to Engineering Data List specifications and must provide comprehensive material certifications and mill test reports to verify compliance with rigorous aerospace standards. The opportunity is categorized under NAICS code 331210 and is managed by the DLA Aviation office in Oklahoma City. Interested parties must submit their responses by the deadline of December 4, 2026, to secure the role of delivering these critical certified materials directly to the manufacturer.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aircraft Trailing Edge FabricationThis subcontract, titled Aircraft Trailing Edge Fabrication, involves the primary manufacture of aircraft structural components for the B-1 platform under DLA Aviation. The selected contractor is responsible for producing 48 completed Trailing Edge units, part number L2400006-001, utilizing aerospace-grade tooling. All production must strictly adhere to the Manufacturing Qualification Requirements and the Engineering Data List. To ensure compliance and quality standards, the contractor is required to complete a Source Approval Request package. This project is managed by the Department of Defense through the DLA Aviation office in Oklahoma City, falling under NAICS code 336413. The response deadline for this opportunity is December 4, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of F-15 Butterfly ValvesThis subcontract involves the manufacture and supply of 90 new Butterfly Valves, specifically part number 3215986-1-1, for Department of the Air Force aircraft platform projects. The scope of work encompasses the entire production lifecycle, including the procurement of raw materials, functional testing, and preservation packaging to ensure the components meet all operational requirements. The project is managed under the Department of Defense through the DLA Aviation office in Oklahoma City. To ensure quality and regulatory compliance, the contractor must adhere to MQR-PSD-1 standards and maintain an approved Source Approval Request package. The contract falls under NAICS code 336413, focusing on the delivery of fully inspected and packaged valves to prime contractors.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Specialized Preservation and Packaging for KC-135 Structural ComponentsThis subcontract involves providing specialized preservation and military-grade packaging services for KC-135 structural components on behalf of prime contractors for the Department of the Air Force. The scope of work includes the application of protective coatings and corrosion preventatives, ensuring all aerospace spares are packaged according to strict MIL-SPEC standards. Additionally, the contractor is responsible for preparing all necessary shipping documentation to facilitate the delivery of preserved units to Tinker AFB. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this opportunity falls under NAICS code 339999. The solicitation was posted on November 3, 2026, with a response deadline of November 11, 2026. The primary objective is to deliver fully preserved and packaged units that are ready for immediate transport.

All Other Miscellaneous Manufacturing

POSTED

about 13 hours ago

DEADLINE

Quality Assurance, Inspection, and Testing for KC-135 Structural SparesThis subcontract involves providing quality assurance, inspection, and testing services for KC-135 structural spares on behalf of the Department of the Air Force. The scope of work focuses on independent inspection and non-destructive testing for prime contractors, utilizing Coordinate Measuring Machines for dimensional inspection and validating materials against technical drawings. The contractor is responsible for ensuring all parts comply with MQR and SAR requirements and must maintain NADCAP accreditation for all special processes. The project deliverables include comprehensive inspection reports, Certificates of Conformance, and fully validated parts. Managed under NAICS code 541380 and associated with the Department of Defense via DLA Aviation at Oklahoma City, the opportunity was posted on November 3, 2026, with a response deadline of November 11, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Supply of Certified Aerospace Materials for KC-135 Structural SupportThis subcontract involves the procurement and delivery of certified raw metals, alloys, or composites to support Department of the Air Force KC-135 structural projects. The selected provider must supply raw stock that strictly adheres to Engineering Data List specifications and provide comprehensive Mill Test Reports to ensure full material traceability. All shipments of certified raw materials are to be delivered directly to the designated fabricator. To qualify for this engagement, the contractor must maintain an AS9100 or an equivalent aerospace quality management system. This opportunity is managed through the Department of Defense via the Ok DLA Aviation At Oklahoma City, with a response deadline set for November 11, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 13 hours ago

DEADLINE

Precision Manufacture of KC-135 Structural Support (KC3-11000-1)This subcontract, titled Precision Manufacture of KC-135 Structural Support (KC3-11000-1), involves the production of 146 finished structural support units for Department of the Air Force KC-135 projects. The contractor is responsible for transforming raw materials into finished geometry for part number KC3-11000-1, utilizing aerospace-grade machining and forming equipment to ensure all structural tolerances are met according to the Engineering Data List and technical drawings. Managed by the Department of Defense through DLA Aviation at Oklahoma City under NAICS code 336413, the contract requires strict adherence to Manufacturing Qualification Requirements and the completion of Source Approval Request packages. The solicitation was posted on November 3, 2026, with a response deadline of November 11, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

F-15 Air Heat Exchanger ManufacturingThis subcontract involves the manufacture and supply of four Air Heat Exchangers, part number 2342146-2-1, for prime contractors supporting Department of the Air Force F-15 platform projects. The scope of work encompasses the entire production cycle from raw materials, including the procurement of components, rigorous inspection, and final testing. The project is managed under the Department of Defense via the DLA Aviation office in Oklahoma City. To ensure quality and regulatory adherence, the contractor must comply with MQR-PSD-1 standards and submit a formal Source Approval Request package. The opportunity is categorized under NAICS code 336413, with a response deadline set for November 11, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Aerospace Surface Treatment and PaintingThis subcontract for Aerospace Surface Treatment and Painting involves providing specialized corrosion control, priming, and final painting services for prime contractors on Department of the Air Force projects. The scope of work includes the application of aerospace-grade primers, topcoats, and chemical conversion coatings or anodizing, utilizing industrial spray booths and curing ovens to deliver finished, coated stabilizer assemblies. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires the service provider to maintain NADCAP accreditation for chemical processing and coating. Interested parties must respond by November 11, 2026, under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Precision Machined Components for Horizontal StabilizerThis subcontract opportunity involves the production of precision-machined components for horizontal stabilizers to support Department of the Air Force projects. The scope of work includes the CNC machining, milling, and turning of aerospace-grade titanium or aluminum alloys to create brackets, ribs, and attachment fittings. All deliverables must strictly adhere to the tolerances specified in the Engineering Data List. The project is managed by the Department of Defense through the DLA Aviation office in Oklahoma City under NAICS code 332710. To be eligible for this contract, providers must hold AS9100 certification. The solicitation was posted on November 3, 2026, with a response deadline of November 11, 2026.

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Marine Non-Destructive Testing (NDT) and Inspection

W07V Endist St Paul

POSTED

about 13 hours ago

DEADLINE

Medium and Low Voltage Electrical System Testing

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 13 hours ago

DEADLINE

Quality Certification and Data Documentation

DLA Maritime - Portsmouth

POSTED

about 13 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality Inspection

Ok DLA Aviation At Oklahoma City

POSTED

about 13 hours ago

DEADLINE

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

W07V Endist St Paul

POSTED

about 13 hours ago

DEADLINE

Q301--HUSBANDRY ANIMAL -wo/wd, B+3 POP 12/17/2026 - 12/16/2030

Solicitation # 36C26227Q0093

262-NETWORK Contract Office 22 (36C262)

POSTED

about 13 hours ago

DEADLINE

B--USGS Paired Bulk Mineralogy/Clay Analyses

Solicitation # 140GG027Q0021

Usgs Contracting Activity

POSTED

about 13 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light Filters

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Contractor Testing Services

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT) Services

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS