Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Air Compressor Maintenance

Active
PANNGB-26-P-0000-038241 Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation PANNGB-26-P-0000-038241 is a request for quotations for air compressor annual maintenance services for the NJ Air National Guard 177th Fighter Wing. The scope of work includes bi-annual preventative maintenance and quarterly air samples, structured across a base year and four optional years. This is a 100 percent small business set-aside under NAICS code 811310, and the resulting contract will be a firm-fixed-price award. Quotes must be submitted by September 2, 2026, at 1:00 PM EST to the designated contracting officials. To be eligible, offerors must be registered in the System for Award Management. The government will evaluate proposals based on a combination of total evaluated price and past performance, as recorded in the Supplier Performance Risk System. Award decisions will be based on the best value to the government, with a preference for the lowest-priced offeror that demonstrates substantial performance confidence.

General Info

Air compressor maintenance for NJ Air National Guard; small business set-aside; firm-fixed-price.

Agency

Department Of Defense → W7NP Uspfo Activity Njang 177View Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Egg Harbor Township, NJ, 08234, USA

Set-Aside

SBA

Documents

(5)

Attachment+2+-+Provisions+and+Clauses_177FW+Air+Compressor+Services.pdf

PDF

Attachment+4+-+WD+2015-4189+Revision+36.pdf

PDF

Attachment+1+-+Compressor+Maintenance+PWS+20260826.pdf

PDF

Compressor+Q+and+A+26Aug2026.pdf

PDF

Attachment+3+-+Pricing+Schedule_177FW+Air+Compressor+Services.xlsx

XLSX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W7NP Uspfo Activity Njang 177
Contacts2 people available
OfficeEGG HARBOR TOWNSHIP, NJ, 08234-9500, USA
Organization / Agency
Department Of Defense → W7NP Uspfo Activity Njang 177
View Agency Profile
Office AddressEGG HARBOR TOWNSHIP, NJ, 08234-9500, USA
Contacts
Maria Vazquez
Tammy Hickerson

Full Description

Show more

8/27/2026 RFQ Amendments:  


1. Corrected the S/N of the Atlas Copco FX11 Air Dryer. Refer to the updated PWS (Attachment 1) dated 20260826.


2. Uploaded Q & A document dated 26Aug2026.


This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Revolutionary Federal Acquisition Regulation (FAR) Subpart 12.2, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.


Solicitation Number: PANNGB-26-P-0000-038241 is issued as a Request for Quotation (RFQ). This solicitation number shall be referenced on any written quote provided under this RFQ.


This acquisition is a 100% set-aside for Small Business concerns. The North American Industry Classification System (NAICS) code 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance with a size standard of $12.5M and PSC J043-Maint/Repair/Rebuild of Equipment-Pumps and Compressors will be utilized.


Regulatory Authority: This solicitation incorporates provisions and clauses by reference (see Attachment 2). The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. This document incorporated provisions, and clauses are in effect through Federal Acquisition Circular FAC 2026-01 Effective 13 March 2026 and the Revolutionary FAR Overhaul (RFO) as applicable.


The NJ Air National Guard 177th FW requires Air Compressor annual maintenance services in accordance with the Performance Work Statement (Attachment 1). The following commercial services are requested in this solicitation:


CLIN 0001: Base Year: Bi-Annual Preventative Maintenance; 1 JOB


CLIN 0002: Base Year: Quarterly Air Samples; 1 JOB


CLIN 0003: Option Year 1: Bi-Annual Preventative Maintenance; 1 JOB


CLIN 0004: Option Year 1: Quarterly Air Samples; 1 JOB


CLIN 0005: Option Year 2: Bi-Annual Preventative Maintenance; 1 JOB


CLIN 0006: Option Year 2: Quarterly Air Samples; 1 JOB


CLIN 0007: Option Year 3: Bi-Annual Preventative Maintenance; 1 JOB


CLIN 0008: Option Year 3: Quarterly Air Samples; 1 JOB


CLIN 0009: Option Year 4: Bi-Annual Preventative Maintenance; 1 JOB


CLIN 0010: Option Year 4: Quarterly Air Samples; 1 JOB



All prospective offerors must be registered in the System for Award Management (SAM) at www.sam.gov. Lack of SAM registration will make an offeror ineligible for award.


Site Visit at 177th Fighter Wing: A site visit will not be conducted.


Questions pertaining to this RFQ are due by Wednesday, 26 August 2026 / 1:00 PM EST.


Email Questions to: Mrs. Maria Vazquez (Contracting Specialist) at marialourdes.o.vazquez2.civ@army.mil and SMSgt Tammy Hickerson (Contracting Officer) at tammy.hickerson@us.af.mil.  


Notice to Vendor(s): The government reserves the right to cancel this RFQ, either before or after the closing date. In the event the government cancels this RFQ, the government has no obligation to reimburse a vendor for any costs.


Addendum FAR 52.212-1, Instructions to Offerors– Commercial Products and Commercial Services:


FAR Provision 52.212-1, Instruction to Offerors–Commercial Products and Commercial Services (DEVIATION 2026-O0038), applies to this acquisition and is incorporated by reference. The following addendum is provided for this solicitation:


NOTE: All headings in bold are referencing back to the basic provision 52.212-1.


To assure timely and equitable evaluation of the quotes, vendors must follow the instructions provided in FAR 52.212-1 and are required to meet all solicitation requirements, failure to meet a requirement may result in a quote being ineligible for award. The government’s terms, conditions, and respective clauses contained within this solicitation are prescribed IAW the FAR and RFO as applicable and are not subject to conditionally proposed revisions or changes requested by offerors.


Paragraph (a); Submission of Offers: Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include the items referenced in the basic provision 52.212-1.


RFQ Due Date/Time: Wednesday, 2 September 2026 / 1:00 PM EST


Quotes must be sent as stated below, if provided by any other method, incomplete, or missing required items may not be considered. If submitting via email, it is recommended a read/delivery receipt is attached to the email.


Email quotations to: Mrs. Maria Vazquez (Contracting Specialist) at marialourdes.o.vazquez2.civ@army.mil and SMSgt Tammy Hickerson (Contracting Officer) at tammy.hickerson@us.af.mil.


Note: If quotes are mailed or hand delivered, an electronic version of all documents must be provided at time of submission. Beware, “.zip” files are not an acceptable format for the Air Force Network and will not go through government email systems. Emails over 10 MB in size will not come through the system.


Subparagraph (4); In addition to the required information provide the following with your quote:


Instructions for Price Submission:


Complete the Pricing Schedule provided attached to this RFQ (Attachment 3). The “pricing worksheet” is included in the pricing schedule and is required to be completed by offerors. Please make sure to include any discount terms if applicable. Vendors will input the price per item (to the nearest cent) for the Base and four (4) Option Years. The Total Evaluated Price (TEP) will be calculated by adding the Total Amount per Period (Base and Option Years 1-4) and half of Option Year 4 (calculating the Extension of Services IAW FAR 52.217-8). Failure to propose prices for all line items on the pricing schedule will render the quote incomplete and potentially removed from further award consideration.


Firm Fixed Priced: The resultant contract will be Firm Fixed Priced; accordingly, pricing is not subject to revision and/or negotiation if selected for contract award. Quotes shall include pricing for all items in the Pricing Schedule and unit prices shall not be more than two (2) decimal places.


Subparagraph (5); All vendors must be registered and active in the System for Award Management (SAM) at https://sam.gov/ at time of quote submittal to be considered for award. Vendors must complete all necessary fill-ins and certifications in the on-line Representations and Certifications.


Paragraph (b); Period for Acceptance of Offers: The offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.


Paragraph (d); Contract Award: The government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms. However, the government reserves the right to conduct interchanges, if necessary. The government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received.


(End of addendum)



Addendum FAR 52.212-2, Evaluation– Commercial Products and Commercial Services:


FAR Provision 52.212-2, Evaluation- Commercial Products and Commercial Services. (2026-02 DEVIATION)


Paragraph (a); Evaluation factors: The government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors will be used to evaluate offers:
i. Price
ii. Supplier Performance Risk System (SPRS) IAW DFARS 252.204-7024


This evaluation will be conducted as Firm Fixed Price, where Past Performance is approximately equal to Price. Additionally, offerors are required to provide the following:


Paragraph (b); Options: The government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the government to exercise the option(s).


Paragraph (c); Notice of award: A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the government may accept an offer unless a written notice of withdrawal is received before award.


Note: The vendor acknowledges that should the quote terms and conditions and/or agreement conflict with mandatory provisions of the Federal Acquisition Regulation (FAR) and other Federal law applicable to commercial acquisitions, to the extent of such conflict the FAR and Federal law govern and conflicting vendor terms and conditions and/or agreement are unenforceable and are not considered incorporated into any resultant contract.


Basis for contract award:
The government will make a Firm-Fixed-Price award to the responsible contractor that conforms to requirements of the solicitation and provides the best value to the government considering price and past performance as indicated in the below evaluation steps. The government reserves the right to award to other than that lowest priced quote.


Price Evaluation:
The Contracting Officer has determined there is a high probability of adequate price competition in this acquisition. However, if at any time during this competition the Contracting Officer determines that adequate price competition no longer exists; offerors may be required to submit information to the extent necessary for the Contracting Officer to determine the reasonableness and affordability of the price.


The government will evaluate prices submitted on RFQ Attachment 3 - Pricing Schedule. The government will evaluate for unbalanced pricing. Next, the Total Evaluated Price (TEP) will be calculated by adding the Total Amount per Period (Base and Option Years 1-4) and half of Option Year 4 (calculating the Extension of Services IAW FAR 52.217-8). NOTE: Failure to propose prices for all CLINs will render the quote incomplete and potentially removed from further consideration.


Offerors should propose the best pricing to the government for each item in arriving at the most competitive price. Price information submitted in each offeror’s quote, as required by the Addendum to FAR 52.212-1, Instructions to Offerors-Commercial Items, will be evaluated to determine if proposed prices are fair and reasonable IAW FAR 12.204(a). Unbalanced pricing may pose an unacceptable risk to the government and may be a reason to reject an offeror’s quote.


Evaluation Steps:


  • Step 1: The government will review all quotes for compliance. A compliant quote consists of a quote that meets the government’s requirements identified in Addendum to 52.212-1.
  • Step 2: Rank all acceptable quotes based upon offeror’s Total Evaluated Price (TEP) from lowest TEP to highest TEP.
  • Step 3: Evaluate lowest price offeror’s past performance. If the lowest priced offer is evaluated to have a “Substantial” performance confidence assessment, and is determined to be responsible, that offer represents the best value for the government, and the evaluation process stops at this point. Award will be made to that offeror without further consideration of any other quotes.
  • Step 4: In the event the government does not make an award pursuant to Step 3 above, the government will evaluate the next lowest price offer and the process will continue (in order of price) until a quote is judged to have a “Substantial Confidence” performance confidence assessment rating or until all offerors are evaluated. An integrated best value award decision will be made considering price and past performance confidence and the government reserves the right to award a contract to other than the lowest priced offeror.

Discussions: The government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary.


Assumptions, Conditions & Exceptions: Any exception to the solicitation may render a quote unacceptable. If your company takes exception to any of the requirements of the PWS or terms/conditions, they must be clearly identified in your quote. These will be reviewed for potential impact on your ability to successfully meet the government’s requirements. Any assumptions, conditions or exceptions which may negatively impact successful performance of this requirement could render the quote ineligible for award.


(End of addendum)

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
Field Disassembly of a WWII Tank Hull at Twentynine Palms, CA
Solicitation # M0026426Q0134
Bastion Supply and Logistics, an SDVOSB small business, is seeking a subcontractor for the field mechanical disassembly of a WWII M4A3 Sherman tank hull at MCAGCC Twentynine Palms in San Bernardino County, California. The scope of work involves the undercarriage removal and recovery of track chains, bogie truck assemblies, road wheels, drive sprockets, an idler, return rollers, a bulldozer mounting arm, and a belly plate over a period of three to five working days. The project requires one oxy-acetylene torch cut on an engine deck door stop, which must be performed by a certified individual with five years of documented experience. All components must be palletized and steel-banded for transport. The contractor is responsible for providing portable sanitation and acting as the generator of record for lead-bearing waste, while Bastion will provide a 35,000 lb forklift and a skid steer. Personnel must possess DBIDS base access, antiterrorism awareness, and complete mandatory briefings on range safety, desert survival, and desert tortoises. This project is subject to the Service Contract Act and DOL Wage Determination 2015-5629, requiring certified payroll. Quotes must be firm not-to-exceed and are due by September 3, 2026, with range availability confirmed from October 31 to December 7, 2026. Any subcontract is contingent upon the award of the prime contract under solicitation M0026426Q0134.
PURECJ HOLDING LLC dba Bastion Supply & Logistics

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
Repair Power Lab Air Compressor
Solicitation # 70Z03926QCGA00031
The contractor is required to perform comprehensive repair services on an Ingersoll Rand Model R5.5i-A125 air compressor located in McAllister Hall at the United States Coast Guard Academy in New London, Connecticut. This includes full responsibility for all labor, materials, equipment, transportation, and supervision needed to restore the unit to operational condition. Key tasks involve executing lockout/tagout procedures, replacing critical components such as the cooling fan, inlet valve, unload solenoid, blowdown valve, air filter, oil filter, air/oil separator, and drive belt, as well as removing and analyzing an oil sample and replacing the oil. Additional duties include inspecting the scavenge line, cleaning the coolers and panel filter, greasing the motor if applicable, and conducting thorough operational tests to confirm proper function before returning the compressor to service. This work is solicited under the contract title Repair Power Lab Air Compressor, with solicitation number 70Z03926QCGA00031, issued on August 10, 2026, and responses due by August 31, 2026. The opportunity is designated as a Small Business Set Aside under NAICS code 811310 and is administered by the Department of Homeland Security through the Coast Guard Academy, with the place of performance specified in New London, Connecticut, and the contracting office located in Groton. Primary point of contact is Kayla Rex, reachable via email and phone, with Jason M. Askeew listed as secondary contact. All work must be performed on-site at the designated facility, and successful performance requires strict adherence to safety protocols and operational standards to ensure the compressor meets mission-critical requirements.
Cg ACADEMY(00039)

POSTED

about 17 hours ago

DEADLINE

in 3 days
View Details
NAICS: 811310
New
Federal
Area of Interest (AoI) – Pad Mount Transformer & Voltage Regulator Inspection and Repair (CSO-W911KF25SC002)
Solicitation # W911KF25SC002-AoI0012
The U.S. Army Contracting Command – Anniston Army Depot (ACC-ANAD) is seeking qualified contractors to inspect and evaluate single-phase and three-phase pad-mount transformers and voltage regulators to determine whether each unit should be repaired or retired. The work involves comprehensive physical and electrical testing, including Turns Ratio Test, Megger insulation resistance, impedance, and load/no-load watts, to assess the condition of equipment listed in Attachment Aol0012. Contractors must provide a detailed report per unit including nameplate data, test results, and a clear recommendation for repair or retirement, accompanied by a detailed cost estimate for any recommended repairs. All work must comply with industry standards such as IEEE C57.12.34, ANSI/ASTM D3487 for PCB-free transformer oil, and DOT regulations for transportation. The oil used must be new, non-reprocessed, and certified to contain less than 50 ppm of PCBs, and repaired units must be painted olive green with the kVA rating clearly displayed in three-inch letters. A bayonet-type fuse must be installed with a label instructing venting prior to removal. The contract will include one base year and four option years, with performance taking place at the Anniston Army Depot in Alabama, where all equipment will be delivered and inspected. The solicitation, identified as W911KF25SC002-AoI0012, is open for submissions through SAM.gov with a deadline of August 28, 2026. Proposals must be submitted electronically and are evaluated on a best-value basis considering technical merit, mission relevance, and cost reasonableness, without a preference for lowest price technically acceptable. The technical proposal must be submitted separately from the price proposal, with the former containing no cost information and the latter itemizing all fees and charges. Offerors must be registered in SAM.gov with an active Unique Entity ID and CAGE code, and must also register in the Procurement Integrated Enterprise Environment (PIEE) system to receive payments. Contractors must self-certify their small business status, be free from suspension or debarment, and ensure submissions are unclassified. Foreign-owned firms may respond provided they can obtain necessary security approvals. The contract requires a minimum three-year warranty on all materials and workmanship, use of new or OEM-equivalent replacement parts, and adherence to prescribed labeling and marking standards. No formal contract clauses, attachments with page counts, or detailed CLINs are provided; however, the
W6QK Acc Anad

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details
NAICS: 811310
New
Federal
Electrical maintenance/retrofit for Devlieg Mill Machining Center
Solicitation # W519TC-26-Q-A138
Solicitation W519TC-26-Q-A138, issued by the Army Contracting Command - Rock Island, seeks a contractor to provide a firm fixed price electrical retrofit for the Devlieg Mill 4W72 Machining Center at the Rock Island Arsenal - Joint Manufacturing and Technology Center in Illinois. The scope of work includes the evaluation, engineering, procurement, manufacturing, and installation of an electrical retrofit package featuring new FANUC controls, servo motors, a spindle motor, and the integration of Renishaw Probe Systems with Inspection Plus Software. All new components and wiring must be labeled and comply with NEMA standards. A critical requirement of this contract is that the machine and all government-furnished equipment must remain on-site at the installation; off-site retrofit is strictly prohibited. The contract is estimated at 26,000 dollars and will be awarded to the responsible offeror whose proposal is most advantageous to the government, considering price and other factors. Key deliverables include a detailed maintenance and parts report due within five business days of completion, with final acceptance contingent upon inspection and verification of training by the Contracting Officer's Representative. The contractor is responsible for all transportation costs to the destination and must utilize Wide Area Workflow for invoicing. Compliance with the Buy American Act, Service Contract Labor Standards, and environmental regulations regarding ozone-depleting chemicals, PCBs, and asbestos is required. Proposals are due by September 8, 2026.
W6QK Acc-Ri

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details