This Government Contract opportunity from North Carolina was posted on August 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Autoclave Service & Preventive Maintenance

Closed

State & Local

Submission Closed09/14/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed by the agency's Virginia operations. The solicitation was posted on October 1, 2026, with a strict response deadline of October 7, 2026. Interested parties must submit their responses through the official supplier portal by the specified cutoff time.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Laundry Replacement of the PLC Controlling

Solicitation # SSP-ITT-64321

The NHS Wales Shared Services Partnership Procurement Services is seeking a qualified contractor for solicitation SSP-ITT-64321 to replace the Programmable Logic Controller (PLC) and associated software for the Continuous Batch Washer (CBW) at the Llansamlet Laundry Production Unit in Swansea. The project involves a full survey and mapping of existing panel I/O and wiring, the supply and installation of a replacement PLC with compatible software interfaces, and full integration with sorting systems and associated press PLCs. To maintain the facility's capacity of processing 35,000 linen items per day, all work must be performed outside normal production hours to avoid operational disruption. The scope concludes with the commissioning of the installation and comprehensive training for on-site personnel. The estimated contract value is 25,000 GBP excluding VAT, with an award based on a weighted combination of price and quality. The estimated period of performance runs from 1 December 2026 to 28 February 2027, by which date all delivery, installation, commissioning, training, and acceptance must be completed. All associated invoicing must be finalized by 31 March 2027. Interested contractors must demonstrate technical expertise in industrial automation, PLC systems, and operationally critical production environments. The deadline for tender submissions is 26 October 2026 at 4:00pm.

NHS Wales Shared Services Partnership-Procurement Services (hosted by Velindre University NHS Trust)

POSTED

DEADLINE

Preventative Maintenance and Repair of Heavy Equipment for the Fort Mifflin Project Office

Solicitation # W912BU26QA024

The USACE Philadelphia District is seeking sources for a non-personal services contract to provide preventative maintenance and repair of heavy equipment for the Fort Mifflin Project Office. This sources-sought opportunity, identified by solicitation number W912BU26QA024 and NAICS code 811310, requires a contractor to manage all service providers independently without government supervision or control. Interested parties must submit their responses by September 3, 2026. The project is managed by the Department of Defense under the W2SD Endist Philadelphia office located in Philadelphia, Pennsylvania. Primary points of contact for this market research effort are Tiffany Chisholm and Cherita Williams.

W2SD Endist Philadelphia

POSTED

DEADLINE

Repair / Overhaul Allied Systems Marine Crane Dual Point Davits

Solicitation # 70Z08526R3D035B00

The U.S. Coast Guard Surface Forces Logistics Center is seeking quotes for a requirements-type contract to provide open inspect-repair services for Allied Dual Point Davits. This acquisition is being conducted on a sole-source basis with Allied Systems Company, the original equipment manufacturer, under solicitation number 70Z08526R3D035B00. The work will be performed in Curtis Bay, Maryland, and falls under NAICS code 811310. Interested parties must submit questions by October 8, 2026, at 1:00pm EST, with final quotes due by October 20, 2026, at 12:00pm EST. This solicitation follows Federal Acquisition Regulation guidelines for commercial products and services, and no further written solicitation will be issued.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Automatic Door Repair Service

Solicitation # W51AA126QA096

This solicitation, numbered W51AA126QA096, is for a Time and Materials (T&M) non-personal services contract to provide automatic door repair services at Tobyhanna Army Depot in Pennsylvania. The scope of work involves the as-needed maintenance and repair of approximately 160 automatic doors and their associated components to ensure they remain safe and operational with minimal downtime. The contract is structured for a total duration of up to five years, consisting of a base year and four option years, with a specific six-month option to extend services. Performance is expected to occur during government facility operating hours, Monday through Friday, from 0700 to 1530. The government will award the contract using a best value trade-off process, evaluating offers based on technical capability, past performance, and price. Offerors must provide three relevant government or commercial contract references from the past five years and must hold a CMMC Level 1 Self-certification at the time of award. Key requirements include the submission of a Quality Control Plan within ten days of award and strict adherence to safety, security, and environmental standards, including OSHA compliance, MIL-STD-882E, and NEPA specifications. Contractors must also comply with mandatory security training, such as AT Level I and iWATCH Army, and follow specific protocols for handling Controlled Unclassified Information (CUI). Proposals must be submitted via email to the Contract Specialist by the deadline of October 8, 2026, at 14:00.

W6QK Acc-Apg Cont Ct Tyad Ofc

POSTED

DEADLINE

Sources Sough Notice - MHE Motor Rebuilding for DLA Distribution

Solicitation # SP330026SS5003

The Department of Defense, via DLA Distribution, is issuing a Sources Sought Notice to conduct market research for the rebuilding of various material handling equipment motors. The selected vendor will be responsible for the pickup of motors from New Cumberland, Pennsylvania, performing all necessary labor and materials for rebuilds at their own facility, and returning the equipment to the government location. All work must be completed within three weeks of an order and must adhere to original factory specifications to ensure full functionality. The scope includes motors from manufacturers such as Shabmuller, Ametek, Yale, Hyster, Landoll, Drexel, Hyundai, and Crown, and all rebuilt units must include a one-year warranty. Interested vendors, particularly small businesses under NAICS code 811310, must submit their company information, CAGE code, UEI, and a detailed capability statement to the designated contract specialist. Responses should include evidence of previous experience with similar services and clarification on whether the firm is a manufacturer or distributor. This notice is for planning purposes only and does not constitute a formal solicitation or a commitment by the government. All responses must be submitted via email by October 15, 2026.

POSTED

DEADLINE

Automatic Transfer Switch (ATS) Maintenance & Repair Services (STVHCS) Amendment 0001

Solicitation # 36C25727Q0023

The Department of Veterans Affairs Network Contracting Office 17 is soliciting a firm-fixed price contract for maintenance and repair services for Russellectric Automatic Transfer Switch (ATS) units at the South Texas Veterans Healthcare System in San Antonio, Texas. The scope of work is divided into emergency repairs for units ATS-EDP1 and ATS-EPHC to resolve erratic voltage readings and nuisance operations, as well as preventative maintenance and inspection for units ATS-EPHG, ATS-CDP1, and ATS-CDP2. The contractor is required to provide comprehensive service reports, ensure system validation for operational safety, and adhere to NFPA 70E electrical safety standards and OSHA requirements. All load transfers must be coordinated with the VA M&O Electric Shop and may occur after hours or on weekends to minimize hospital disruptions. This opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs), with a strict limitation that no more than 50% of the government payment may be subcontracted to non-SDVOSB/VOSB firms. Award will be based on the Lowest Priced Technically Acceptable (LPTA) procedure. To be considered technically acceptable, offerors must submit a signed SF 1449, a detailed diagnostic task plan for the specified units, and three past performance references from the last three years. Proposals must be submitted via email to the contracting specialist by October 5, 2026. Personnel must obtain short-term VA identification badges and comply with VA Privacy and Security policies, including HIPAA and the Privacy Act.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

EQUIPMENT SUPPORT SERVICES (ESS) GUAM

Solicitation # N3943026R0009

Navfac Systems And Experimental Warfare Ctr

POSTED

DEADLINE

Inspection & Testing of Electric and Diesel Fire Pumps, Engines, Controllers, and Oil/Water Separator at NWS Earle, BLDG R38

Solicitation # N4008526R0270

Solicitation N4008526R0270 is a firm-fixed-price request for proposal issued by NAVFAC/SYCOM Mid-Atlantic for construction services at Naval Weapons Station Earle in Leonardo, New Jersey. The project involves the comprehensive inspection and operational testing of electric and diesel fire pumps, motors, engines, controllers, and an oil/water separator located in Building R38. Due to previous fire damage and prolonged inactivity, the contractor must perform rigorous pre-start diagnostics, including visual assessments, insulation resistance tests, and manual shaft inspections, before energizing any equipment. All work must adhere to NFPA 20, NFPA 25, UFC standards, OSHA, and Army Corps of Engineering EM 385-1-1 safety requirements. This requirement is 100% set-aside for small business concerns under NAICS 8110310. The government will award the contract based on the Lowest Price Technically Acceptable (LPTA) process, evaluating total proposed price and technical acceptability, which includes a satisfactory past performance rating from the last three years. A 10 percent price evaluation preference is available for HUBZone small businesses and other successful small business concerns. The period of performance requires the contractor to begin work within 15 calendar days and complete all services within 60 calendar days of the Notice to Proceed. Proposals are due by 1100 EST on October 14, 2026, and must be submitted via email to the designated points of contact. Key personnel requirements include a Project Superintendent, a Quality Control Manager, and a Site Safety and Health Officer with at least two years of experience. Contractors must maintain specific insurance coverages, including $500,000 for comprehensive general liability, and ensure all personnel meet military base access standards, including Real ID compliance and criminal background checks. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

Navfacsyscom Mid-Atlantic

POSTED

DEADLINE

Hoisting & Rigging Equipment Support Services

Solicitation # RFP_26-081JR

Princeton Labor - DOE Contractor

POSTED

DEADLINE

15617 - Wagner Paint Proportioner

Solicitation # FA8227-26-Q-1003

Solicitation FA8227-26-Q-1003 is a Sources Sought notice issued by the Department of Defense for the 309 Maintenance Support Group at Hill Air Force Base, Utah. The government is conducting market research to identify capable sources for the maintenance of Wagner Paint Proportioners and Perf 50 Air Drying Systems. The scope of work includes providing all management, tools, supplies, and labor for scheduled maintenance on monthly, quarterly, bi-annual, and annual intervals, as well as unscheduled maintenance as requested. A key requirement is that personnel must possess factory certification in the maintenance and repair of Wagner Flex Control Plus and 3K Smart Systems. The requirements include several critical deliverables and compliance standards. Contractors must submit an Environment, Safety, and Occupational Health Plan within 15 days of award and a Quality Assurance Program Plan within 30 days. Reporting obligations are stringent, with maintenance service reports, diagnostic reports, and condition found reports due within two business days of service completion, and accident reports required within three calendar days. Performance is governed by FAR 52.246-4, 52.246-5, or 52.212-4(a), with a heavy emphasis on adhering to Original Equipment Manufacturer standards and best commercial practices. This notice is for planning purposes only and does not constitute a formal request for quotation.

FA8227 Afsc Ol H Pzim

POSTED

DEADLINE

RA360599 - SERVICE COMPRESSORS & DRYERS

Solicitation # RA360599

The East Suffolk and North Essex NHS FT is seeking providers for service compressors and dryers at Colchester Hospital under solicitation number RA360599. Interested parties must register and submit their quotes through the MultiQuote portal, using the specific opportunity reference to gain access. The deadline for responses is October 15, 2026, at 11:00 AM. For site-specific inquiries, Nick Bailey is the designated contact, while general administrative and portal support is managed by Trevor Hodgkins at MultiQuote.

East Suffolk and North Essex NHS FT

POSTED

1 day ago

DEADLINE

in 14 days

AI Contract Overview

This subcontract opportunity with the State of North Carolina Community Colleges Systems Office involves providing specialized service and preventive maintenance for STERIS autoclaves. The selected provider will support prime contractors on various North Carolina Community College System projects to ensure all equipment remains in optimal working order through technical maintenance and certified operational delivery. Qualified candidates must employ manufacturer-certified technicians and maintain strict adherence to OSHA compliance standards. Key deliverables include the submission of detailed maintenance reports and the verification of equipment functionality. The response deadline for this opportunity is September 14, 2026.

General Info

Maintenance and specialized service for STERIS autoclaves for NC Community Colleges by September 2026.

Agency

North Carolina → State of NC - Community Colleges Systems Office

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 50-2526013.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

50-2526013 Specialized Medical Equipment and Supplies Add MFGs IFB IT Sourcing Event

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 14

subcontract

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNorth Carolina → State of NC - Community Colleges Systems Office

ContactsNo contacts available

OfficeN/A

Organization / AgencyNorth Carolina → State of NC - Community Colleges Systems Office

Office AddressN/A

ContactsNo contact information available

Full Description

Performs service and preventive maintenance on STERIS autoclaves for prime contractors on North Carolina Community College System (NCCCS) projects. Conducts technical maintenance and preventive service to ensure equipment remains in good working order. Requires manufacturer-certified technicians and OSHA compliance. Delivers maintenance reports and certified operational equipment.