Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on September 14, 2015. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

BEARINGS

Awarded
N0016415T0278Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332991
New
DIBBS
Supply of Nonmetallic Special Shaped Section SealsThis subcontract involves the supply of a nonmetallic special shaped section seal for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Operations Vehicle Support. The selected provider is responsible for manufacturing or sourcing one unit of the specific part identified by NSN 5330014447976, utilizing precision machining or molding equipment to ensure the product meets all specifications. The contractor must maintain strict compliance with the DLA Master List of Technical and Quality Requirements. This procurement falls under NAICS code 332991 and requires performance at FPO 96691. Interested parties must respond by November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 12 days
NAICS: 332991
New
DIBBS
Fluid Filter SupplyThis subcontract involves the supply of 14 fluid filter units for prime contractors working on Department of Defense projects. The hardware must strictly adhere to NSN 1650010315026 specifications and comply with MIL-STD-129 marking requirements. To ensure quality and standardization, all items must be sourced from manufacturers listed on the Primary QPL or QML, and the provider is required to maintain ISO 9001:2015 quality management certification. The procurement is managed by the DLA Weapons Support ASC Supplier OE and AF Div under NAICS code 332991. Delivery of the 14 units is designated as FOB Origin, with the place of performance located in Cherry Point. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
Supply of Drum Housing Covers (NSN 1650003175585)This subcontract involves the manufacture and supply of 22 Drum Housing Covers, identified by NSN 1650003175585, for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for producing the units according to strict NSN specifications, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the contractor must ensure all items are marked and packaged in accordance with RQ017, MIL-STD-129, RP001, and ASTM D3951 standards. The project requires strict adherence to regulatory mandates, including Buy American compliance and a CMMC Level 2 self-assessment. Performance will take place at Hill AFB, and the final deliverable consists of 22 fully marked and packaged covers. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
Guide Bar (NSN 1005-00-113-7866) SupplierThis subcontract involves the manufacture and supply of 55 Guide Bars, identified by NSN 1005-00-113-7866, to support prime contractors for the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected supplier must produce parts according to strict technical specifications and is required to be ITAR registered and compliant due to the nature of the defense articles. The delivery process begins with the submission of two units for Contractor First Article Testing within 90 days of the award, followed by a 45-day government review period. Upon successful CFAT approval, the supplier will deliver the remaining balance to complete the total order of 55 units. Performance for this contract is centered at Hill AFB.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 9 days
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-27-T-8282
Solicitation SPE4A6-27-T-8282 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 263 sleeve bushings under NSN 3120005855108. These items are designated as critical application items for The Boeing Company (P/N 66-9431) and must adhere to TDP Rev C Gen 3 and Reference QAP 13873 QAP-B02 Revision B. The delivery is required within 171 days, with a need ship date of May 3, 2027, and an original required delivery date of March 2, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, where acceptance requires zero non-conformances. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and adherence to various FAR and DFARS clauses, including Buy American and Balance of Payments and safeguarding of covered defense information. Quotes must be submitted through the DLA Internet Bid Board System (DIBBS).
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-27-T-8297
Solicitation SPE4A6-27-T-8297 is a fixed-price procurement issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for 358 units of sleeve bearings and bushings, identified by NSN 3120-00-589-9414. This opportunity is set aside for HubZone small businesses, though other small businesses may be considered if no qualified HubZone offers are received. The required delivery date is June 11, 2027, with a delivery period of 171 days, and the place of performance is Anniston, Alabama. The contract mandates strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 compliance for manufacturer inspection systems. Inspection and acceptance will occur at the origin per FAR 52.246-2. Packaging must follow MIL-STD-2073-1E and RP001 requirements, specifically requiring each sleeve to be wrapped in neutral paper to prevent damage. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification. Additionally, the contract incorporates the Buy American and Balance of Payments Program and prohibits the use of mercury or mercury compounds in the hardware or packaging. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-27-T-8284
Solicitation SPE4A6-27-T-8284 is a request for quotations from the Defense Logistics Agency for the procurement of sleeve bushings, identified by NSN 3120006614251 and part number NAS77-4-018. The requirement consists of two line items totaling 311 units, with 94 units designated for delivery to DLA Distribution San Joaquin in Tracy, California, and 217 units for the DDSP New Cumberland Facility in Pennsylvania. The need ship date is May 3, 2027, with an original required delivery date of June 27, 2027. This is designated as a critical application item, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The contract specifies that inspection and acceptance will occur at the origin. Quality assurance follows a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Invoicing is to be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 12, 2026, and a price evaluation preference is available for HUBZone Small Business Concerns.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-27-T-8302
Solicitation SPE4A6-27-T-8302 is a fixed-price procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for 216 units of sleeve bushings, identified by NSN 3120-00-618-9356. The requirement specifies a need ship date of April 6, 2027, with an original required delivery date of June 21, 2027, for delivery to Hill Air Force Base, Utah. This acquisition is categorized under NAICS code 332991 and may be eligible for automated award. Certified HUBZone small business concerns are eligible for a price evaluation preference, though offers utilizing additive manufacturing are ineligible for award. The contract mandates strict quality and technical compliance, requiring manufacturer inspection systems to meet SAE AS9003 or ISO 9001 standards. Inspection and acceptance will occur at the origin per FAR 52.246-2. Packaging and marking must adhere to MIL-STD-129 and RP001 standards. Due to the nature of the technical data, this procurement is subject to export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program (JCP) certification. Additionally, the contract incorporates comprehensive cybersecurity requirements, including CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-27-Q-0213
Solicitation SPE4A6-27-Q-0213 is a small business set-aside request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of 118 annular ball bearings, NSN 3110-01-131-3691. This firm-fixed-price contract requires delivery within 166 days after order receipt, with shipping terms set as FOB Destination to DLA Distribution Anniston in Alabama. The government will determine the best value through a comparative assessment where price, quoted delivery, and past performance are weighted approximately equally, though SPRS assessments are the most significant factor within the past performance evaluation. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including requirements for safeguarding covered defense information, combating trafficking in persons, and compliance with the Buy American Balance of Payments Program. Quotations must be submitted by November 12, 2026, and remain valid for 90 days.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-27-T-8304
Solicitation SPE4A6-27-T-8304 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 410 sleeve bushings, identified by NSN 3120005809991 and part number NAS538-4P017. This is designated as a critical application item requiring adherence to TDP Rev A Gen 1 and basic non-government standard NAS538 Revision 12. The delivery is required within 265 days after order, with a need ship date of August 5, 2027, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, including inspection and acceptance at origin under FAR 52.246-2, with manufacturer inspection systems meeting SAE AS9003 or ISO 9001 standards. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Key regulatory requirements include the Buy American Act, DFARS cybersecurity reporting, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations are due by November 12, 2026, and must be submitted to the issuing office in Richmond, Virginia.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-27-T-8301
Solicitation SPE4A6-27-T-8301 is a small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of five sleeve bushings under NSN 3120-00-585-4890. The contract requires the delivery of two units for Government First Article Testing within 180 calendar days of the award, with a final need ship date of November 30, 2025. Performance and delivery are centered at Robins AFB, Georgia, and the procurement is governed by NAICS code 332991. The contractor must adhere to strict quality and regulatory standards, including ISO 9001:2015 certification and zero-based sampling plans per MIL-STD-1916. Packaging and marking must comply with RP001 and MIL-STD-129, while technical data is subject to ITAR and EAR export controls. Key administrative requirements include electronic invoicing via Wide Area WorkFlow, compliance with the Buy American Act, and adherence to CMMC Level 2 cybersecurity standards. Quotations are due by November 12, 2026, and are subject to a price evaluation preference for HUBZone small business concerns.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BEARING ASSEMBLY, STERN
Solicitation # SPE4A6-27-Q-0220
Solicitation SPE4A6-27-Q-0220 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of seven stern tube bearing assemblies, identified by National Stock Number 3120-01-700-6980. This is a firm fixed price acquisition with a required delivery date of June 1, 2027, and a specified delivery window of 210 days after order. The items are configuration control items that must adhere to specific technical and quality requirements found in the DLA Master List, including compliance with MIL-STD-130N for item identification and Science Applications International 8W138 part number EPMA1-20.1. The contract specifies that inspection and acceptance will occur at the origin, with freight shipping directed to DLA Distribution San Diego. Packaging and marking must strictly follow MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001, with a strict prohibition on the use of mercury or mercury compounds. Award decisions will be based on a best value determination, weighing price, past performance, and quoted delivery equally. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and various DFARS safeguarding and cybersecurity regulations. Quotations must be submitted by November 10, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 6 days

AI Contract Overview

Show more

Solicitation N00164-15-T-0278 was issued on September 14, 2015, by the Naval Surface Warfare Center Crane Division of the Department of Defense for the procurement of bearings under NAICS code 332991. This unrestricted, full and open competition was processed in accordance with FAR 13 and required the manufacture of bearings according to specific drawings and a statement of work. The requirement consists of base quantities and option quantities for two specific part numbers: 12 units of part number 177210 and 12 units of part number 177209 for the base award, with options to purchase up to 27 additional units of each part over a two-year ordering period. To be eligible for award and to access controlled attachments, contractors were required to be properly registered in the System for Award Management and the Joint Certification Program. All proposals were due by September 21, 2015, at 2:00 PM Eastern Time. The procurement was managed by Jason Greer at the NSWC Crane office located in Crane, Indiana.

General Info

Agency

Department Of Defense → Nswc Crane

Contract Value

$141,336

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

IN, USA

Set-Aside

NONE

Awardee

KAYDON CORPORATION

Award Issued Date

Documents

1
PDF, High priority: read this firstrfp
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Organization / AgencyDepartment Of Defense → Nswc Crane
Office AddressCRANE, IN, 47522-5001, USA
Contacts
Jason Greer
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
N00164-15-T-0278 - BEARINGS - FSG 31 - NAICS 332991 ISSUE DATE 14 SEP 2015 - CLOSING DATE 21 SEP 2015 - 2:00 PM Eastern Time ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for... This solicitation is unrestricted, full and open competition processed In Accordance With (IAW) FAR 13. BEARINGS IAW DRAWINGS AND STATEMENT OF WORK CLIN 0001 (BASE) QTY 12 EACH P/N 177210 CLIN 0002 (OPTION 1) UP TO QTY 27 EACH P/N 177210 CLIN 0003 (BASE) QTY 12 EACH P/N 177209 CLIN 0004 (OPTION 2) UP TO QTY 27 EACH P/N 177209 This solicitation is being issued as an OPTIONS type of potential contract. This OPTION CLINs would be considered the OPTION CLINs for the part numbers specified in CLINs 0001 & 0003 for an estimated quantity of 1-27. The options may be exercised in whole or in part, multiple times, up to the quantity of 27 each for the ordering period effective date of award for 2 years. Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling +1 (555) 000-0000 or via the internet at https://www.sam.gov. Contractors must be properly registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) in order to receive the controlled attachments. Offerors may obtain information on SAM registration and annual confirmation requirements by calling +1 (555) 000-0000 or via the internet at https://www.sam.gov. Information about the JCP is located at http://www.dlis.dla.mil. The controlled attachments will be posted to FedBizOps at the same time the solicitation is posted. FedBizOps may be accessed at http://www.fbo.gov. This solicitation is being issued pursuant to the procedures at FAR 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-15-T-0278; is hereby issued as an attachment hereto. All changes to the requirement that occur prior to the closing date will be posted via FedBizOpps. It is the responsibility of interested vendors to monitor the FedBizOpps site for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award. Offers may be e-mailed to contact@example.gov. All required information must be received on or before 21 SEP 2015 2:00PM EASTERN TIME.

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 484220
New
Federal
Equipment Transportation and HandlingThis subcontract for Equipment Transportation and Handling supports prime contractors on NSWC Crane projects under the Department of Defense. The scope of work involves providing comprehensive transportation and logistics services, specifically the loading, unloading, and rigging of heavy equipment and Connex units. These operations require the use of flatbed trucks and forklifts to move materials to the designated FOB Destination in Crane, Indiana, ensuring all activities remain in strict compliance with DOT certifications. The opportunity is designated as a Total Small Business Set Aside under NAICS code 484220. Interested parties should note the response deadline of November 10, 2026. All services will be performed locally within the 47522 zip code area to facilitate the efficient delivery of equipment to its final destination.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 238320
New
Federal
Connex Coating and Surface PreparationThis subcontract opportunity involves providing industrial coating and painting services for Connex units on projects for the Naval Surface Warfare Center Crane. The selected contractor will be responsible for the surface preparation of metal containers and the application of industrial-grade coatings in strict accordance with the specified salient characteristics. To qualify, providers must possess the necessary industrial painting equipment and maintain an ISO 9001:2015 quality management certification to ensure all delivered units are fully coated and inspected. The project is designated as a total Small Business Set Aside under NAICS code 238320 and will be performed in Crane, Indiana. Interested parties must submit their responses by November 10, 2026. This effort supports the Department of Defense by ensuring critical storage units meet rigorous durability and protection standards.
Painting and Wall Covering Contractors

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
ON GOING MAINTENANCE
Solicitation # N0016427Q0013
Solicitation N00164-27-Q-0013 is a total small business set-aside issued by the Naval Surface Warfare Center Crane for the ongoing maintenance and restoration of Connex containers with serial numbers X, Y, and Z. The requirement is for a firm fixed price contract covering all labor, materials, and handling necessary to complete a specialized eight-phase coating and restoration process. This technical process includes Carboline removal, surface preparation, application of Rust Grip encapsulation, Super-Therm thermal roof shielding, and Enamo-Grip topcoating in Desert Tan, concluding with decal replacement and a final quality inspection per ISO 9001:2015 standards. The period of performance is five weeks from the date of award, with delivery specified as FOB Destination to Crane, Indiana. Offers must be submitted via email to the designated point of contact by November 10, 2026, at 4:00 PM Eastern Time. Award will be granted to the responsible offeror determined to be most advantageous based on price and other factors, with a 10 percent price evaluation preference applied to HUBZone and other successful small business concerns. Contractors must be registered in the System for Award Management and meet Cybersecurity Maturity Model Certification Level 2 Self requirements. Invoicing and payment will be processed electronically through the Wide Area Workflow system.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541611
New
Federal
Engineering Program Management SupportThe Engineering Program Management Support subcontract involves providing management support services for prime contractors on NSWC Crane projects for the MDA. The scope of work focuses on managing technical throughput, maintaining workforce continuity, and handling financial reporting, specifically including A004 and A009 reports. The contractor is responsible for delivering monthly status and funding reports while monitoring performance against QASP AQLs. Strict adherence to compliance and safety standards is required, including CUI, OPSEC, and CSWF requirements, as well as knowledge of 29 CFR 1910 and 1926 safety standards. This opportunity falls under NAICS code 541611 and is associated with the Department of Defense. The response deadline for this requirement is November 16, 2026.
Administrative Management and General Management Consulting Services

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
Federal
Senior Engineering Technical Support ServicesThe Senior Engineering Technical Support Services subcontract involves providing expert technical planning and execution for complex engineering projects supporting the MDA at NSWC Crane. The scope of work includes preparing designs and specifications for sophisticated electronic equipment and resolving operational challenges that fall outside standard methodologies. The primary deliverables for this engagement are completed system specifications and comprehensive technical studies. Qualified candidates must possess a Secret security clearance and a minimum of ten years of experience leading technical teams specifically for Aegis weapon systems. This opportunity is categorized under NAICS code 541330 and is managed through the Department of Defense. Interested parties should note the response deadline of November 16, 2026.
Engineering Services

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
Federal
Missile Defense Systems Integration & Engineering SupportThe Missile Defense Systems Integration and Engineering Support subcontract involves providing technical support and engineering design for prime contractors on NSWC Crane projects for the Missile Defense Agency. The scope of work focuses on integrating network operating systems, application programs, and hardware for shore-based facilities and Aegis Adaptation. The selected provider will manage the full lifecycle of resilient software and hardware, from initial specification through long-term maintenance, while delivering comprehensive engineering products and technical reports. Qualified candidates must possess a degree in Engineering or Physical Science and maintain a Secret security clearance. This opportunity is categorized under NAICS code 541330 and is associated with the Department of Defense. Interested parties should note the response deadline of November 16, 2026.
Engineering Services

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
Federal
ADVANCE NOTICE -DRAFT RFP N0016427R3009 non-personal professional, engineering, technical assessments and special studies, and management support services in support of Global Deterrence and Defense Department
Solicitation # N0016427SNC14
The Naval Surface Warfare Center Crane Division is issuing a draft solicitation for a Cost-Plus-Fixed-Fee Task Order under the SeaPort-NxG Multiple Award Contract to provide non-personal professional, engineering, technical assessments, special studies, and management support services. This requirement supports the Global Deterrence and Defense Department, specifically focusing on Aegis Adaptation and other Missile Defense Agency projects involving systems integration, engineering design, and the fielding of missile defense systems in shore-based facilities worldwide. The anticipated period of performance consists of a one-year base period with four one-year options, not to exceed five years in total, with an estimated award date of June 1, 2027. Award will be based on best value, utilizing a tradeoff analysis between technical approach, management, personnel, and total evaluated cost, with past performance serving as a pass/fail eligibility factor. Offerors must be SeaPort-NxG MAC holders and are required to submit detailed cost proposals, staffing plans, and personnel qualifications. The contract includes strict requirements for security clearances, DFARS cybersecurity compliance, and adherence to a Quality Assurance Surveillance Plan. As this is currently a draft notice for industry feedback, all inquiries must be submitted by November 16, 2026, and any materials provided during this phase will not be considered part of the formal proposal once the official Request for Proposals is released.
Engineering Services

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
Federal
New Manufacture of AN/SPS-48E Serpentines
Solicitation # N0016427RLL20
The Naval Surface Warfare Center Crane intends to award a five-year Indefinite Delivery Indefinite Quantity contract for the new manufacture of various serpentine assembly variations for the AN/SPS-48E. The contract has an estimated ceiling of 5 million dollars and falls under NAICS code 334511. The solicitation period opens on October 30, 2026, and closes on November 13, 2026, at 4:00 PM EST. This requirement is being pursued as a sole source procurement with Loughmiller Tool and Design of Loogootee, Indiana, under the authority of FAR 6.103-1(c)(2). The government has determined that competition could lead to unacceptable delays or substantial duplication of costs. While the government intends to negotiate with a single source, all responsible parties may submit capability statements or proposals for consideration. Interested contractors must be registered in the System for Award Management.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
Federal
Custom Test Fixtures and Mounting Hardware for EQT/EMIThis subcontract opportunity with the Department of Defense, specifically for NSWC Crane, involves the design and fabrication of specialized test fixtures and mounting hardware for EQT/EMI projects. The contractor is responsible for providing precision-machined components made from high-strength alloys that are engineered to withstand high-impact shock and vibration. All deliverables must adhere to MIL-DTL-901E and MIL-STD-167-1A standards to ensure there are no parasitic resonances during testing. The scope of work requires the use of CAD design software to ensure that the hardware accurately matches specified weight and center of gravity requirements. The final deliverables are physical test fixtures intended for use by prime contractors on US Navy testing projects. This requirement is categorized under NAICS code 332710 and is based in Crane, Indiana.
Machine Shops

POSTED

7 days ago

DEADLINE

in 14 days
View Details
NAICS: 541380
New
Federal
Electromagnetic Compatibility (EMI) Testing for Naval SystemsThis subcontract opportunity with the Department of Defense, specifically for NSWC Crane, involves providing electromagnetic compatibility testing for prime contractors working on US Navy shipboard projects. The scope of work requires conducting EMI testing in accordance with MIL-STD-461G and verifying compliance with shipboard power interface standards per MIL-STD-1399 Section 300A. The selected provider will utilize specialized equipment, including anechoic chambers, EMI receivers, and spectrum analyzers, to analyze electromagnetic signatures and deliver formal EMI Test Plans and Reports. The project is categorized under NAICS code 541380 and will be performed in Crane, Indiana. Interested parties must submit their responses by November 18, 2026, at 4:00 PM.
Testing Laboratories and Services

POSTED

7 days ago

DEADLINE

in 14 days
View Details
NAICS: 541380
New
Federal
Environmental Qualification Testing (EQT) for Naval Shipboard EquipmentThis subcontract, issued by the Department of Defense through Nswc Crane, involves providing Environmental Qualification Testing for Naval Shipboard Equipment. The scope of work focuses on supporting prime contractors on US Navy shipboard projects by conducting specialized testing to ensure equipment durability and compliance. Key technical requirements include High-Impact Shock Tests per MIL-DTL-901E, Mechanical Vibration testing per MIL-STD-167-1A, and various laboratory tests following MIL-STD-810H. The selected provider will utilize shock rigs, vibration tables, and environmental test chambers to verify critical thermal characteristics, weight, and center of gravity. The final deliverables for this effort consist of comprehensive Environmental Test Plans and Reports. Performance will take place in Crane, Indiana, under NAICS code 541380, with a response deadline of November 18, 2026.
Testing Laboratories and Services

POSTED

7 days ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
Federal
SOURCES SOUGHT / REQUEST FOR INFORMATION (RFI) PRODUCTION OF SURFACE SHIP SONAR DOMES AND WINDOWS
Solicitation # N0016427SNC10
The Department of Defense, specifically the Nswc Crane office, is conducting market research through a Sources Sought Synopsis and Request for Information regarding the production of surface ship sonar domes and windows. This notice is issued under DFARS PGI 206.103-170 and FAR Part 10 to identify capable providers under NAICS code 334511. It is important to note that this is not a formal request for proposal, quotation, or bid, and the government will not provide compensation for any information submitted. Interested parties must submit their responses by November 13, 2026. The primary point of contact for this inquiry is Jonathan Dickinson. All activities related to this request are centered in Crane, Indiana, and the solicitation is tracked under number N0016427SNC10.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

7 days ago

DEADLINE

in 9 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332991
Awarded
Federal
31--BEARING,ROLLER,NEEDLE
Solicitation # SPE4A615TKX20

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING,PLAIN,ROD END
Solicitation # SPE4A615TKL07

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING,SLEEVE
Solicitation # SPE4A615TKD79

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING SLEEVE, MATCH SET
Solicitation # SPE4A615TJH81

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING HALF,SLEEVE
Solicitation # SPE4A615TJC31

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BUSHING,SLEEVE
Solicitation # SPE4A615TKU88

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING,ROLLER,JOUR
Solicitation # SPE4A615TBY14

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING HALF,SLEEVE
Solicitation # SPE4A615TJR44

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING, BALL, DUPLEX
Solicitation # SPE4A615Q4097

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BUSHING,SLEEVE
Solicitation # SPE4A515TY245

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BEARING, ROLLER, TAPERED
Solicitation # SPE4A615THP90

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details
NAICS: 332991
Awarded
Federal
31--BUSHING,SLEEVE
Solicitation # SPE4A515Q2968

POSTED

about 11 years ago

CLOSED

about 11 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS