Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Boiler Removal and Installation

Active

International

Response Deadline08/24/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the complete removal of the existing boiler and all associated CO₂ compensation components, followed by the installation of a new 2,000,000 BTU/hr boiler, with all necessary rigging and mechanical positioning included in the scope. The work must be performed in Ontario, excluding the National Capital Region, and requires full compliance with safety and operational standards for industrial heating systems. All dismantling, haul-away, and site restoration activities related to the old equipment are the contractor’s responsibility, and the new installation must be fully functional and integrated into the existing facility systems. This is a subcontract opportunity posted by the Government of Canada under the Department of Agriculture and Agri-Food, with a response deadline of August 24, 2026. The North American Industry Classification System code 238220 applies, indicating it falls under plumbing, heating, and air-conditioning contracting. There is no set-aside designation specified, and the solicitation is open to eligible subcontractors who can meet the technical and logistical requirements. The project does not provide a point of contact, and all inquiries must be directed through the official tender portal linked in the posting.

General Info

Remove old boiler, install new 2M BTU/hr unit in Ontario, comply with safety standards, all work by contractor.

Agency

Government of Canada → Department of Agriculture and Agri-FoodView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Ontario (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 07:00:00 PM UTCin 17 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of Agriculture and Agri-Food

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of Agriculture and Agri-Food

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete removal of existing boiler and CO₂ compensation components, and installation of a new 2,000,000 BTU/hr boiler, including rigging and mechanical positioning.

Similar Contracts

Same NAICS industry code

Fire Alarm System Diagnostic and Repair ServicesALCORN STATE UNIVERSITY is seeking qualified contractors to provide comprehensive fire alarm system diagnostic and repair services across its campus facilities. The scope of work includes inspection, troubleshooting, repair, and routine maintenance of all fire alarm components such as control panels, smoke and heat detectors, manual pull stations, notification appliances, and associated electrical wiring. Contractors must be prepared to respond to system malfunctions, perform preventive maintenance, and ensure all equipment complies with applicable fire safety codes and standards. The contract is structured as a subcontract and is classified under NAICS code 238220 for electrical and other construction installation contractors. Solicitations are open with a response deadline of August 31, 2026, and the services are expected to be performed at various locations within the university’s campus in Mississippi.

ALCORN STATE UNIVERSITY

POSTED

about 10 hours ago

DEADLINE

Plumbing and Piping Systems Installation

California Department of Veterans Affairs

POSTED

about 11 hours ago

DEADLINE

HVAC System Installation

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 12 hours ago

DEADLINE

Plumbing and Piping Systems

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 12 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This solicitation is for fire extinguisher inspection and servicing services at the Excelsior Springs Job Corps Center in Missouri, issued as a subcontracting opportunity by Education & Training Resources. The contract requires quarterly inspections of 175 fire extinguishers across 22 campus buildings and center-owned vehicles, with replacement of used or uncharged units as needed. Each extinguisher must be tagged with an inspection label, and all work must comply with the current National Electrical Code and NFPA 101, Life Safety Code, along with applicable OSHA regulations and local, state, and federal building codes. The period of performance runs from October 1, 2026, through September 31, 2027, with services scheduled four times per year. Bids must be submitted by 12 p.m. CST on August 14, 2026, and must include a completed Bid Sheet with a detailed cost breakdown, Missouri-specific licensing, vendor acknowledgment form, Form W-9, FFATA Notice, Anti-Lobbying Certification, certificates of insurance, and a proposed service schedule. All responses are evaluated based on best overall value, not merely lowest price, and failure to meet any mandatory requirements will result in disqualification. The contract is set aside for small business concerns, including small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses, under NAICS code 238220. The winning bidder must maintain an active SAM.gov registration with a Unique Entity ID and comply with federal labor standards including the Service Contract Act, Minimum Wage requirements under Executive Order 14026, and FAR-certified clauses regarding debarment, anti-lobbying, and information dissemination. Safety and conduct rules prohibit fraternization with students or staff, consumption of alcohol, drugs, tobacco, or firearms on-site, and require adherence to center security policies. Bonding is required based on contract value: a 100% payment bond for projects exceeding $35,000 but not surpassing $150,000, and both performance and payment bonds for contracts over $150,000. Insurance coverage for builders risk, automobile, liability, and workers compensation must be provided. Payment is due within 30 days of invoicing, and all deliverables are F.O.B. destination with final acceptance conducted by the center. Technical coordination is handled by William Boucher, while procurement inquiries should

ETR/Excelsior Springs Job Corps

POSTED

about 12 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

The contract seeks a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—specifically, two existing Peerless gas-fired boilers in Building 1 (IOOF) and one new high-efficiency gas-fired boiler in Building 2 (Administrative/Academic). The project requires the installation of boilers with specified input and output capacities: 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for the IOOF boilers and a 600,000 B.T.U. input, 572,000 B.T.U. output, 94% Energy Star-rated boiler for the administrative building. Commissioning of the boiler control systems by a qualified agent is mandatory, along with the submission of comprehensive documentation including inspection reports, test results, warranties, commissioning reports, and operations and maintenance manuals. All work must comply with applicable Kansas state codes including NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, and IECC, as well as EPA regulations such as 40CFR761 and 40 CFR 61 subpart M, and OSHA standards under 29CFR1926. The contractor must install preformed PVC pipe labels with flow direction indicators and is responsible for receiving, storing, and securing all materials and equipment on site. Performance must adhere to a 90-day total period with 60 days allocated to substantial completion and 30 days to contract close-out, with work to begin within fourteen days of the Notice to Proceed and fully completed within 120 calendar days. Substantial completion requires a formal walk-through with the Center’s authorized representative and the resolution of all punch list items, while final completion mandates submission of government inspection reports, manufacturer start-up checklists, and third-party water testing results. The contract mandates a Certificate of Liability Insurance naming the Center as both certificate holder and additional insured, compliance with the Davis-Bacon Act wage determinations, and proper licensing and permitting under Manhattan, Kansas regulations. The contractor must provide a ten-year warranty on boiler heat exchangers, a two-year warranty on all other parts, a one-year workmanship warranty, and a one-year preventive maintenance agreement for the Center’s use. Offerors must be certified small businesses under the SBA’s set-aside categories including SB, SDB,

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 12 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract is for the repair of a AquaPlex Turbopower 96 hot water heater, Model #100L400A-TPX with Serial Number F008076, located in the Lincoln dormitory at the Keystone Job Corps Center in Drums, Pennsylvania. The scope of work includes replacing specific components such as the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. Labor and materials must be itemized separately in all proposals, and the contractor is required to comply with Davis-Bacon wage standards and submit certified payroll records. All offerors must be registered and active on SAM.gov to be eligible. The solicitation is set aside exclusively for small business categories, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, under NAICS code 238220. The place of performance is clearly defined as Drums, Pennsylvania, but the period of performance, delivery schedule, FOB terms, and estimated contract value are not specified. No formal evaluation factors, weighting criteria, or award basis such as LPTA or best-value are provided. Proposal submission guidelines, including format, deadline, and submission portal, are not detailed in the available documentation, though the posted date is August 7, 2026, and the response deadline is August 14, 2026. The primary point of contact for inquiries is Jennie Drumheller, reachable via email and phone.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 12 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026- Maui- Dorm Exhaust Fans

This subcontracting opportunity with Management and Training Corporation (MTC) for the replacement of approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center in Makawao, Hawaii, is a fixed-price, single lump sum contract structured under a Small Business set-aside that includes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business categories. Solicited under NAICS code 238220, the bid must be submitted via email by 3:00 PM HST on August 28, 2026, to Karllene Allen and Mila Handel, and requires compliance with detailed procedural and documentation standards including a fully completed MTC Bid for Lump Sum Contract form, signed by an authorized representative, along with a comprehensive cost breakout covering materials, labor, equipment, fees, bonds, subcontractor costs, overhead, profit, and other direct or indirect expenses. Bidders must also complete and submit the MTC Supplier Packet, including Form W-9, Supplier Self-Certification, and Acceptance of Terms and Conditions, and provide three references for projects of comparable scope and value. A mandatory site visit with signature on an attendance roster is required prior to bid submission, emphasizing the importance of firsthand knowledge of the work conditions and constraints. The contract imposes strict compliance with federal and Department of Labor requirements, including adherence to Executive Order 13658 for the prevailing federal contractor minimum wage, submission of weekly certified payroll reports, and display of bilingual Davis-Bacon Act posters. Bids exceeding $25,000 must include a 20% bid bond, and upon award, performance and payment bonds equaling 100% of the contract value are required from an A-rated surety company approved by MTC. Insurance mandates include general liability coverage of $1 million per occurrence and $3 million aggregate with MTC listed as additional insured, auto liability of $1 million, worker’s compensation of at least $500,000, and professional liability coverage where applicable. Upon award, contractors must disclose any first-tier subcontractors with values over $30,000 and certify they are not debarred under FAR 52.209-6. Contractors must also submit Safety Data Sheets for all hazardous materials used, provide two complete operation and maintenance manuals, deliver at least two hours of on-site training for

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

NJCC Building 32 Boiler Replacement in Vermont

Solicitation # njcc-building-32-boiler-replacement-vermont

This solicitation seeks bids to replace an existing oil-fired boiler at Building 32 of the Northlands Job Corps Center in Vergennes, Vermont, with a fully compliant, high-efficiency propane steam boiler system. The scope of work includes demolition and proper disposal of the current oil-fired boiler and blow down separator, installation of a new propane steam boiler and gas burner meeting FEMP JCH-814 efficiency standards, replacement of the duplex boiler feed tank and control panel, condensate tanks, steam traps, Y strainers, check valves, and condensate receivers, installation of new boiler feed water piping with a reduced pressure backflow preventer, insulation of all piping, modification of the existing stack, and full system testing including fuel/oxygen mix verification, water side cleaning, boiler skimming, and startup. All work must comply with the International Mechanical Code, International Energy Conservation Code, International Plumbing Code, International Fuel Gas Code, National Electrical Code, NFPA Life Safety 101, and NFPA 58. The project requires the provision of a propane gas tank and all associated materials, with all items quoted F.O.B. destination and no additional charges for delivery, packing, or insurance accepted unless explicitly included and approved. The solicitation is open only to small business concerns as defined under the SBA’s set-aside programs, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. Bidders must demonstrate active registration at SAM.gov with a Unique Entity ID, submit a completed Bid Sheet with detailed line-item pricing for equipment, materials, and labor, provide all required Vermont licensing and credentials, and include mandatory documentation such as Form W-9, Vendor Acknowledgement Form, FFATA Notice, Anti-Lobbying Certification if applicable, Certificates of Insurance listing ETR as certificate holder, and a proposed schedule of work. Bonding is required based on project cost: a 100% payment bond plus another form of payment protection for projects between $35,000 and $150,000, and both 100% performance and payment bonds for projects exceeding $150,000. Contractors must comply with the Davis-Bacon Act, Service Contract Act, and Executive Order 14026 minimum wage requirements, adhere to strict center security and conduct rules prohibiting fraternization with staff or students and the possession of alcohol, drugs,

Northlands Job Corps Center /ETR

POSTED

about 12 hours ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

Management & Training Corporation (MTC) has issued RFQ#3857 Freezer Door Replacement as a subcontracting opportunity for the Charleston Job Corps Center located at 1000 Curtis Price Way, Charleston, WV 25311. The solicitation seeks a qualified contractor to provide all labor, materials, equipment, transportation, supervision, and incidentals required to remove three existing walk-in refrigeration doors— one cooler and two freezers—and install new replacement doors complete with all associated hardware including hinges, latches, gaskets, closers, thresholds, and related accessories. The work must result in doors that align properly, provide an airtight seal, operate smoothly without binding, and be fully functional upon completion. All existing doors and debris must be removed and disposed of properly, and the contractor is required to provide manufacturer warranty documentation and maintenance recommendations. The contract is subject to the Service Contract Labor Standards under FAR 52.222-41 with a mandated wage determination WD#2015-4347 (Rev 29) dated July 8, 2025, requiring compliance with federal prevailing wage rates for service employees. The solicitation is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with eligibility based on the NAICS code 238220 and a size standard of $19 million in annual receipts. Bidders must self-certify their socioeconomic status and provide comprehensive documentation including a completed W-9, Self-Certification Form, Acceptance of Terms and Conditions, three references for similar projects, proof of insurance meeting minimums of $1 million per occurrence for general liability, $1 million for auto coverage, and $500,000 for workers’ compensation, and an insurance certificate naming MTC, DOL, and Charleston Job Corps as certificate holder and additional insured. First-tier subcontractors exceeding $30,000 must disclose any debarment or suspension status under FAR 52.209-6 and all contractors must comply with reporting executive compensation and first-tier subcontract awards under FAR 52.204-10. The contractor must also adhere to Department of Labor requirements including protection of personally identifiable information, mandatory training, records management, and immediate one-hour reporting of any data breach to DOL. All work must be performed on

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract entails the correction of plumbing and gas system deficiencies at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, to ensure compliance with the International Plumbing Code and safety standards. The awarded contractor must provide all labor, materials, equipment, supervision, and incidentals required to complete the work in full operating condition, with specific tasks including gas piping repairs at Building 305 involving isolation, pressure testing, and valve replacement; installation of backflow preventers at Buildings 607 and 701; and relocation of water piping away from electrical panels at Building 610. All work must include piping, fittings, supports, pressure and leak testing, and full restoration of affected areas. The contract is a fixed-price, single lump sum award with an estimated value not exceeding $25,000, and the contractor must achieve substantial completion within 60 consecutive business days after receiving a written Notice to Proceed, beginning work no later than five business days after the agreed start date. A mandatory pre-construction meeting is required upon issuance of the Notice to Proceed. The contractor must adhere to federal labor standards, including payment of the prevailing Federal Contractor Minimum Wage as required by Executive Order 13658, and submit certified payroll reports on a weekly basis. Compliance with FAR clauses such as 52.222-11 requires submission of the SF 1413 Statement and Acknowledgement form, regardless of contract value, while FAR 52.204-10 mandates reporting of executive compensation and first-tier subcontract awards if the contract value exceeds $40,000. The solicitation is set aside for small business entities, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses, and all subcontractors must self-certify under NAICS code 238220. Required documentation includes a detailed bid breakout on company letterhead, completed MTC Supplier Packet containing Form W-9 and Self-Certification, three references for comparable projects, and compliance with insurance requirements including $1 million general liability coverage, $1 million auto liability, and $500,000 workers’ compensation. Contractors must also submit Safety Data Sheets for hazardous materials, verify underground utilities prior to excavation, and provide two hours of on-site training for facility personnel. Final acceptance requires a formal punch list process followed by a final inspection upon resolution of all deficiencies, with liquid

Earle C. Clements Job Corps Center

POSTED

about 12 hours ago

DEADLINE

Fiber Optic Cable Installation – Underground Conduit Pulling & Splicing

Texas Department of Transportation

POSTED

about 12 hours ago

DEADLINE

More opportunities from Government of Canada → Department of Agriculture and Agri-Food

Same awarding agency

Commercial Boiler Unit SupplyThe contract entails the supply of a new 2,000,000 BTU/hr commercial boiler unit to be delivered to Ontario, excluding the National Capital Region, with full responsibility for delivery, all necessary documentation, and ongoing technical support included in the scope. The equipment must meet the required specifications for commercial use and be installed in accordance with industry standards. The solicitation is categorized as a subcontract under NAICS code 333414, which pertains to commercial and industrial boiler and heat exchanger manufacturing, and is issued by the Government of Canada through the Department of Agriculture and Agri-Food. Responses are due by August 24, 2026, with the opportunity posted on August 7, 2026, and all bids must be submitted through the Canada Buys portal to be considered valid.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 23 hours ago

DEADLINE

Electrical and Controls IntegrationThe contract titled Electrical and Controls Integration focuses on the electrical and control systems required for the installation of a new boiler system, encompassing electrical connections, control wiring, integration with the building management system, and the implementation of safety interlocks to ensure operational integrity and compliance. The work involves coordinating all electrical infrastructure to support seamless communication between the boiler and the existing building automation environment, with a strict emphasis on safety protocols and system reliability. Performance of the work is designated for Ontario, excluding the National Capital Region, and all deliverables must align with the technical specifications required for industrial heating systems within federal facilities. This subcontract, assigned under NAICS code 238210 for electrical contracting, was posted on August 7, 2026, with responses due by August 24, 2026. The contracting authority is the Government of Canada through the Department of Agriculture and Agri-Food, indicating that the facility requiring this integration is a federal property under their purview. While no set-aside provisions or point of contact details are provided, the scope demands specialized expertise in building systems integration, with qualified bidders expected to demonstrate proven experience in interfacing industrial equipment with centralized control platforms and adhering to stringent safety standards.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

Gas Line and Venting System InstallationThe contract pertains to the installation or modification of natural gas supply lines and exhaust venting systems, including all associated components such as shut-off valves and pressure regulation equipment, with strict adherence to applicable codes and safety standards. The work involves ensuring proper venting of combustion byproducts through flue systems, requiring technical expertise in gas piping, pressure testing, and compliance with provincial and federal regulatory requirements. All installations must be performed to maintain system integrity, prevent leaks, and ensure safe operation within the designated facilities. The work is scoped for performance in Ontario, excluding the National Capital Region, and is issued as a subcontract under the NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors. The solicitation was posted on August 7, 2026, with a response deadline of August 24, 2026, and is managed by the Government of Canada through the Department of Agriculture and Agri-Food. Bidders must be prepared to meet all technical, safety, and regulatory obligations without provision for set-aside classification, and must ensure their proposals demonstrate capability in executing code-compliant gas and venting systems in government-owned facilities.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

Piping and Hydronic System ModificationsThis contract involves the modification and connection of hydronic piping systems, including the installation and integration of supply and return lines, expansion tanks, and air elimination components. The work requires skilled welding techniques, thorough pressure testing to ensure system integrity, and precise system balancing to guarantee optimal performance and efficiency. All tasks must be executed in compliance with industry standards and safety protocols, with particular attention to the reliability and longevity of the modified infrastructure. The contract is issued as a subcontract under NAICS code 238220 for plumbing and heating work, with performance limited to locations in Ontario excluding the National Capital Region. It was posted on August 7, 2026, and responses are due by August 24, 2026, with the Government of Canada’s Department of Agriculture and Agri-Food listed as the contracting agency. The scope demands experienced contractors capable of managing complex hydronic systems in government facilities, emphasizing quality craftsmanship and adherence to technical specifications throughout the project lifecycle.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

Boiler Replacement Project at the Harrow Research and Development Centre

Solicitation # ESC-2627-063

Agriculture and Agri-Food Canada is seeking a qualified general contractor to undertake the boiler replacement project at the Harrow Research and Development Centre in Ontario, under solicitation number ESC-2627-063. Although the scope of work references the DAR and faulty junctions project at Normandin Farm in Quebec, the physical location for bidding and site visit is clearly designated as the Harrow facility in Ontario, and all tender submissions must be sent electronically to the specified AAFC procurement email. The tender closing date is August 24, 2026 at 2:00 p.m. Eastern Time, and all interested parties must obtain complete tender documents including specifications, plans, and drawings exclusively through the CanadaBuys platform, with any addenda also being issued there. A voluntary site visit is scheduled for August 18, 2026 at 10:30 a.m. Eastern Time at the Harrow site, and while attendance is not mandatory, those who attend must sign an attendance sheet and arrive at least ten minutes early. Bidders must communicate solely with the designated AAFC Contract Officer, Carol Rahal, as any contact with other personnel during the solicitation period may result in disqualification. AAFC reserves the right to accept or reject any or all proposals in whole or in part, without negotiation, and all submissions must be received by the deadline to be considered.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 23 hours ago

DEADLINE

Painting and Coating ServicesThe contract titled Painting and Coating Services encompasses interior and exterior painting, priming, and the application of protective coatings for properties under the jurisdiction of the Government of Canada's Department of Agriculture and Agri-Food. Work is to be performed across locations within Canada, with no specific city designated, indicating potential multi-site execution. The solicitation is structured as a subcontract and is categorized under NAICS code 238320, which corresponds to painting and wall covering contracting. The opportunity was posted on August 4, 2026, with a mandatory response deadline of September 10, 2026, at 7:00 PM. There is no set-aside designation or special eligibility criteria outlined, meaning any qualified subcontractor may respond. All work must comply with applicable government standards for durability, safety, and environmental impact, particularly regarding protective coatings. Interested parties must submit proposals through the official Canada Buys portal prior to the deadline.

Painting and Wall Covering Contractors

POSTED

DEADLINE

in about 1 month

Drywall and Interior FinishesThe contract titled Drywall and Interior Finishes encompasses the full scope of interior wall and ceiling finishes including drywall installation, taping, finishing, and acoustical treatments, all performed to meet specified quality and performance standards. Work is to be carried out across various interior locations within facilities under the jurisdiction of the Government of Canada, specifically the Department of Agriculture and Agri-Food, with performance expected to occur throughout Canada. The contract is structured as a subcontract and falls under NAICS code 238310 for drywall and insulation contracting, indicating the precise classification of the required services. The solicitation was posted on August 4, 2026, with a firm response deadline of September 10, 2026, at 7:00 p.m. Eastern Time, and interested parties must submit proposals prior to this deadline to be considered. Although no set-aside provisions or specific eligibility criteria are outlined, the contract is accessible through the Canada Buys portal, and all submissions must comply with federal procurement guidelines. The lack of detailed point of contact or physical office address suggests that coordination and communication will primarily be handled electronically through the official tender portal.

Drywall and Insulation Contractors

POSTED

DEADLINE

in about 1 month

Excavation and Earthwork ServicesThe contract titled Excavation and Earthwork Services pertains to site excavation, grading, trenching, and backfilling activities required for the construction of foundations and utility installations. It is issued as a subcontract under the NAICS code 237990 and is managed by the Government of Canada through the Department of Agriculture and Agri-Food. The work is to be performed in Canada, with no specific city designated in the provided details. The solicitation was posted on August 4, 2026, and all responses must be submitted by September 10, 2026, by 7:00 PM. The contract does not specify a set-aside type or organization type, and no point of contact information is provided. Interested parties can access the full tender opportunity via the official Government of Canada procurement portal.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

in about 1 month

Structural Steel Fabrication and ErectionThe contract pertains to the fabrication and on-site assembly of structural steel framing for buildings or infrastructure projects under the jurisdiction of the Government of Canada through the Department of Agriculture and Agri-Food. Work is to be performed across Canada with no specific city designated, indicating potential multiple locations or nationwide scope. This is a subcontract opportunity classified under NAICS code 238120, which covers structural steel erection services, and it is open for bidding with a response deadline of September 10, 2026. The solicitation was posted on August 4, 2026, providing interested parties with approximately five weeks to prepare and submit their proposals. There is no set-aside designation specified, meaning the contract is open to all eligible bidders regardless of business size or ownership characteristics. The primary focus is on the engineering, manufacturing, and field installation of steel components to meet structural requirements for government-funded facilities.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

in about 1 month

Roofing System InstallationThe contract pertains to the installation of roofing membranes, insulation, and flashing for both low-slope and steep-slope roofs, covering all necessary materials and labor to ensure a durable, weather-resistant roofing system. Work is to be performed across Canada under the purview of the Department of Agriculture and Agri-Food, Government of Canada, with no specific city designated beyond the national scope. The work falls under NAICS code 238160, indicating classification as roofing contractor services, and is structured as a subcontract opportunity with no set-aside provisions specified. The solicitation was posted on August 4, 2026, and responses are due by September 10, 2026, at 7:00 PM Eastern Time. Potential bidders must comply with all technical and procedural requirements for roofing system installation, including adherence to industry standards for material application, warranty compliance, and safety protocols. Although no point of contact is provided, further details and submissions must be made via the official Canada Buys portal linked in the posting. Execution of the contract will require qualified subcontractors with proven experience in commercial and institutional roofing projects.

Roofing Contractors

POSTED

DEADLINE

in about 1 month

HVAC System InstallationThe contract is for the installation of heating, ventilation, and air conditioning systems including all associated ductwork, units, and controls under a subcontract arrangement with the Government of Canada through the Department of Agriculture and Agri-Food. The work is to be performed anywhere within Canada and is classified under NAICS code 238220 for HVAC installation services. The solicitation was posted on August 4, 2026, and responses are due by September 10, 2026, at 7:00 p.m. Eastern Time. There is no specified set-aside type or organization type restriction, and no point of contact details are provided. All relevant information and submissions must be routed through the CanadaBuys platform via the provided tender notice link.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement outlines the scope of work for formwork construction, reinforcement installation, and concrete pouring required for foundational systems, slabs, and other structural components. This subcontract is tied to federal infrastructure activities under the Department of Agriculture and Agri-Food, with performance expected across Canada, though no specific site is designated. The work must comply with industry standards for structural integrity, safety, and quality control, and execution will require skilled labor with experience in forming, rebar placement, and concrete finishing according to engineered specifications. The solicitation was posted on August 4, 2026, with responses due by September 10, 2026, providing a six-week window for interested parties to prepare and submit proposals. The North American Industry Classification System code 238110 identifies this as concrete work, placing it within the specialized construction sector. The contract does not include a set-asides designation and lacks specific point-of-contact details, suggesting that all inquiries must be directed through the official tender portal. Potential bidders should ensure compliance with Canadian construction regulations and be prepared to demonstrate capacity for large-scale, precision concrete placement under tight timelines.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

in about 1 month