Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on February 7, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Bridge Mill Repair

Awarded
FA9101-22-P-B007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a response deadline set for November 4, 2026. Interested parties must submit their responses by the specified cutoff date via the official supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 2 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & Repair
Pakistan State Oil Company Ltd

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Fisher Recirculation Valve and Actuator DCI and Overhaul
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
WEG Industrial Motor DCI and Overhaul
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Sulzer Boiler Feedwater Pump DCI and Overhaul
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Pump Refurbishment (Add-Alternate No. 3)
Nassau Community College

POSTED

about 14 hours ago

DEADLINE

in 21 days
NAICS: 811310
New
WINDOW AY — 1680016170785 — N0038327QAA17
Solicitation # N0038327QAA17
Solicitation N0038327QAA17, issued by Navsup Weapon Systems Support for the Department of the Navy, seeks a contractor for the teardown, evaluation, repair, and modification of two window assemblies, identified by NSN 1680-01-617-0785. The requirement covers an induction period of one year from the date of the order, with a delivery timeframe of 90 days and shipping terms set as FOB Destination. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's location. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073 and MIL-STD-129, with specialized labeling requirements for Depot Level Repairable items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting standards.
Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Annual And Periodic Inspections And Maintenance And Repair Services Of Port Authority Trans-Hudson Corporation (Path) Emergency Diesel And Natural Gas Generators -Three Year Contract
Solicitation # 2140379
The Port Authority of New York and New Jersey is soliciting bids for a three-year contract to provide annual and periodic inspections, maintenance, and repair services for emergency diesel and natural gas generators used by the Port Authority Trans-Hudson Corporation (PATH). This procurement, identified by solicitation number 6000003543 and NIGP code 28539, is focused on stationary generators. A pre-bid meeting will be conducted via Microsoft Teams on November 9, 2026, from 10:00 a.m. to 11:00 a.m. ET to review the requirements and solicitation documents. Bids must be submitted electronically through the Euna portal by the deadline of November 18, 2026. The Port Authority emphasizes a commitment to non-discrimination in accordance with Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. Procurement operations are managed from 150 Greenwich Street, 21st Floor, New York, New York, and interested parties can contact the Procurement Operations Bid/RFP Custodian via email at [email hidden] or by phone at [phone hidden] for assistance.
The Port Authority of New York and New Jersey

POSTED

about 14 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

This contract, solicitation number FA9101-22-P-B007, involves the refurbishment and testing of a Johnford CNC Bridge Mill right angle milling head to support the 846th Test Squadron. Managed by the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, the work is being performed at Holloman Air Force Base in New Mexico. Due to the mission critical nature of the requirement and its direct impact on Hypersonic programs, the acquisition was processed as a sole-source award. Absolute Machine Tools, Inc. was selected as the sole source for this repair because they serve as the Original Equipment Manufacturer representative. The procurement was expedited under a simplified acquisition process to meet urgent time constraints. The project falls under NAICS code 811310 and was officially posted as an award notice on February 7, 2022.

General Info

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Contract Value

$22,778.28

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Holloman AFB, NM, 88330, USA

Set-Aside

NONE

Awardee

ABSOLUTE MACHINE TOOLS, INC.

Award Issued Date

Documents

1

Single Source Justification - Bridge Mill Repair (F2ETGT2025A101)

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
Contacts2 people available
OfficeARNOLD AFB, TN, 37389-1332, USA
Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
Office AddressARNOLD AFB, TN, 37389-1332, USA
Contacts
Chuck King
contact@example.gov
+1 (555) 000-0000
Brett Moore
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
This requirement is for the repair of a Johnford CNC Bridge Mill. Due to the mission critical nature of this requirement and the time constraints involved, a sole-source acquision was necessary. See the attached J&A for details.

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

NAICS: 611519
New
Federal
EDM Operator and Maintenance TrainingThis subcontract opportunity involves providing on-site technical training for prime contractors working on Department of the Air Force projects at the Arnold Engineering Development Complex. The scope of work requires factory-certified trainers to deliver a comprehensive four-day program for up to 10 personnel, consisting of two days of operator training focused on conversational programming and two days of maintenance training covering mechanical systems and machine controls. The selected provider is responsible for delivering fully trained personnel and all associated training documentation. This requirement is categorized under NAICS code 611519 and is managed by the Department of Defense through the AEDC Procurement Branch. Interested parties should note the response deadline of November 2, 2026.
Other Technical and Trade Schools

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 238990
New
Federal
EDM Machine Installation and LevelingThis subcontract for EDM Machine Installation and Leveling supports Department of the Air Force projects at the Arnold Engineering Development Center. The scope of work involves the physical installation and facility connection of machinery within Building 451, specifically including unloading, positioning, precision leveling, and the installation of floor attachment and shop-air connection hardware. The final deliverable is a machine that is fully leveled, anchored, and connected to facility utilities. The project is managed under the Department of Defense through the AEDC Procurement Branch. A critical requirement for this contract is that supervisory personnel must possess factory-trained certification to oversee the assembly and startup processes. The work is categorized under NAICS code 238990 and is performed at the designated facility in zip code 37389.
All Other Specialty Trade Contractors

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 335311
New
Federal
Power Supply and Voltage Stabilization PackageThis subcontract, titled Power Supply and Voltage Stabilization Package, involves the provision of electrical interface and protection hardware for prime contractors working on Department of the Air Force projects at the Arnold Engineering Development Complex. The scope of work requires the delivery of integrated power conditioning hardware, specifically multi-tap step-down transformers designed to convert 480V, 3PH, 60 HZ power to machine operating voltage. To ensure operational safety and stability, the hardware must integrate internal line filtering, surge protection, and an Uninterruptable Power Supply for safe system shutdowns. All equipment must be manufactured in strict accordance with NFPA 79 standards. The procurement is managed by the Department of Defense under the FA9101 AEDC Pkp Procurement Branch, falling under NAICS code 335311. The response deadline for this opportunity is November 2, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 333517
New
Federal
Small CNC Wire EDM Machine SupplyThis subcontract involves the supply and delivery of a new Small CNC Wire Electrical Discharge Machining machine to support prime contractors on Department of the Air Force projects at the Arnold Engineering Development Complex. The required equipment must be manufactured with Fine Grain Dianite Casting, linear shaft motors, and linear glass scales across the X, Y, U, and V axes. Key integrated features include automatic wire threading, U-V taper cutting, and a comprehensive dielectric system equipped with a chiller and deionizer. The machine must adhere to NFPA 79 standards and be delivered fully functional FOB to Arnold Air Force Base, Tennessee. This procurement is managed by the Department of Defense under the FA9101 AEDC Procurement Branch, with a response deadline of November 2, 2026.
Machine Tool Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 333517
New
Federal
CNC Small Wire EDM
Solicitation # FA9101CNCSmallWireEDM
The Department of the Air Force is issuing a Sources Sought Notice to identify capable small and large businesses for the procurement of a new, fully functional Small CNC Wire Electrical Discharge Machining (EDM) machine for the Arnold Engineering Development Complex (AEDC) at Arnold Air Force Base, Tennessee. The required equipment must support submerged and non-submerged machining, automatic wire threading and alignment, and U-V taper cutting, with minimum axis travel of 15.5 inches for X, 11.5 inches for Y, 8.5 inches for Z, and plus or minus 2.4 inches for U and V. The machine must be compatible with a 480V, 3PH, 60 HZ electrical system and be built to NFPA 79 standards. Delivery is required within 90 days of order receipt, with the contractor providing assembly, startup, and functional testing based on ISO/ANSI standards at the AEDC Model Shop. The government requires a minimum 24-month warranty after installation and a 10-year accuracy guarantee on the linear drive system. Additionally, the contractor must provide two days of formal on-site operator training for up to five people and two days of maintenance training for up to five workers. Service support requirements include a 36-hour on-site repair response time and a 48-hour delivery window for repair parts. Interested respondents under NAICS code 333517 must submit company information, SAM UEI and CAGE codes, a compliance matrix, product literature, and past performance data to the contracting office by November 2, 2026.
Machine Tool Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 541380
New
Federal
Pyrometry Testing and System CommissioningThis subcontract for Pyrometry Testing and System Commissioning involves providing technical validation and acceptance testing for prime contractors on US Air Force facility projects located at Holloman AFB. The scope of work requires the performance of System Accuracy Testing, temperature uniformity surveys, and a three-cycle production demonstration. All activities must be conducted using calibrated thermocouples and pyrometry test equipment in strict adherence to AMS 2750 Pyrometry Standards. The selected provider is responsible for delivering a comprehensive commissioning report and ensuring a successful production demonstration. This opportunity is managed under the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, falling under NAICS code 541380. Responses are due by November 2, 2026.
Testing Laboratories and Services

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 238990
New
Federal
Industrial Mechanical Installation and AnchoringThis subcontract for Industrial Mechanical Installation and Anchoring involves the physical installation and anchoring of a furnace line and charge car for prime contractors at a US Air Force facility located at Holloman AFB. The scope of work requires the mechanical assembly of the system using industrial fasteners and precision leveling tools to ensure all equipment is securely anchored to the facility floor. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project falls under NAICS code 238990. All work must be performed in strict compliance with OSHA 29 CFR 1910 safety standards to deliver a fully installed and anchored furnace line. The response deadline for this opportunity is November 2, 2026.
All Other Specialty Trade Contractors

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 238210
New
Federal
Industrial Electrical and Controls InstallationThis subcontract for Industrial Electrical and Controls Installation involves the installation of electrical power and control systems for prime contractors on US Air Force facility projects located at Holloman AFB. The scope of work includes the wiring of the furnace, temper furnace, and wash unit, as well as the installation of NEMA/IEC industrial control enclosures and components. All activities must be performed in strict accordance with NEC and NFPA 70 standards to deliver a fully powered and wired furnace system. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project falls under NAICS code 238210. The solicitation was posted on October 26, 2026, with a response deadline of November 2, 2026. Performance of the contract is centered in the 37389 zip code area.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 488410
New
Federal
Industrial Equipment Rigging and OffloadingThis subcontract involves the offloading, transport, and positioning of heavy industrial furnace components for prime contractors at Holloman Air Force Base. The scope of work requires the use of heavy-duty cranes and industrial dollies to move equipment from delivery vehicles into Building 1185 and into final positions for anchoring. All operations must be performed in strict compliance with OSHA 29 CFR 1910 safety standards to ensure equipment is delivered safely and ready for installation. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project falls under NAICS code 488410. The response deadline for this opportunity is November 2, 2026, with performance taking place at the designated facility in zip code 37389.
Motor Vehicle Towing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 333994
New
Federal
Industrial Process Furnace and Equipment SupplyThis subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, involves the supply of primary heat treating equipment for prime contractors working on US Air Force facility projects at Holloman AFB. The scope of work includes the manufacture and delivery of a comprehensive furnace line, specifically an Allcase Batch Integral Quench Furnace Model 36–72–36, a Uni-DRAW Temper Furnace, a Spray/Dunk Wash Unit, and a DEDP System 1 Charge Car. To ensure operational precision and quality, all equipment must adhere to AMS 2750 Pyrometry Standards for system accuracy tests and temperature uniformity. The contract falls under NAICS code 333994 and requires the delivery of the fully manufactured furnace line and all associated companion equipment to the designated performance site.
Industrial Process Furnace and Oven Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
Federal
Notice of Intent to Sole Source - Humanetics Innovative Solutions, Inc
Solicitation # FA910129RB003_Humanetics
The 846th Test Squadron at Holloman Air Force Base intends to award a firm-fixed-price contract to Humanetics Innovative Solutions, Inc. for the sustainment of anthropomorphic test devices. The scope of work includes providing replacement parts, specialized factory calibration, sensor certification, and diagnostic services specifically for the JPATS Case-1 Lightest Occupant in Service and JPATS Case-6 Large Anthropomorphic Research Dummy configurations. This procurement is being pursued as a sole-source action due to proprietary technical data rights and OEM-controlled specifications that make Humanetics the only responsible source capable of meeting the agency's needs. While the government intends to negotiate with this single source, other responsible parties may submit capability statements or proposals for consideration until November 10, 2026. If no viable alternative responses are received, the contract will be awarded directly to Humanetics Innovative Solutions, Inc.
Other Measuring and Controlling Device Manufacturing

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 333994
New
Federal
New Heat Treat Equipment
Solicitation # FA9101NHT
The Air Force Test Center’s Installation Contracting Division is conducting market research through a Sources Sought Notice to identify capable small and large businesses for the turnkey procurement, delivery, installation, and commissioning of a new Surface Combustion Allcase Batch Integral Quench Furnace Line. Located at Holloman Air Force Base in Building 1185, the project includes the installation of a Uni-DRAW Temper Furnace and a Spray/Dunk Wash Unit. The selected contractor will be responsible for all specialized engineering, rigging, and labor, ensuring the system is fully operational and compliant with NFPA 86, AMS 2750, OSHA 29 CFR 1910, and NEC/NFPA 70 standards. The performance timeline involves a 4 to 6 week kickoff and drawing phase, followed by a manufacturing lead time of approximately 52 to 78 weeks. On-site installation is expected to take 4 to 6 weeks, with an additional 2 to 3 weeks for commissioning and handover. Formal acceptance requires a successful three-cycle production demonstration and the sign-off of an Engineering Release Form. Additionally, the contractor must provide a two-year extended warranty and comprehensive on-site training for operators and maintenance personnel. Interested respondents must submit their company information, UEI number, technical solutions, budgetary estimates, and delivery timelines by November 2, 2026.
Industrial Process Furnace and Oven Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Closed
Federal
Mobile Water Pump Trailer Fuel Tank Repair
Solicitation # FA303022Q0007
FA3030 17 Cons Cc

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Closed
Federal
Intent to Award Sole Source- : F3V5L11340AW01- Kardex Preventative Maintenance
Solicitation # F3V5L11340AW01
FA3020 82 Cons Lgc

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
28--ROTOR,TURBINE, IN REPAIR/MODIFICATION OF
Solicitation # N0010421RCZ82
Navsup Weapon Systems Support Mech

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
H312--FY22: Fire Protection Systems Inspection, Testing, M&R TIERED EVALUATION
Solicitation # 36C24822P0589
248-NETWORK Contract Office 8 (36C248)

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
Timber Lake Job Corps Center Building. 1467 Freezer Cooler Door Replacement
Solicitation # 1282A722Q0001
USDA Forest Service

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
WAPA DSW: Heavy Equipment Inspection Services - Amendment 0001
Solicitation # 89503122QWA000186
Western-Desert Southwest Region

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Closed
Federal
Spillway Crane Repairs
Solicitation # 20223161030

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
N32253-22-Q-0027 Shaft Lathe Repair
Solicitation # N3225322Q0027
Pearl Harbor Naval Shipyard IMF

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Closed
Federal
Grove Mobile Crane Emergent Repair IDIQ
Solicitation # N421582245005
Norfolk Naval Shipyard Gf

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
Miscellaneous Food Processing (MFP) Equipment and Unscheduled Repair
Solicitation # HDEC04-21-R-0040
Defense Commissary Agency

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Awarded
Federal
58--SERVOMECHANISM,TILT, IN REPAIR/MODIFICATION OF
Solicitation # N0038321QD192
Navsup Weapon Systems Support

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details
NAICS: 811310
Closed
Federal
Grove Mobile Crane Emergent Repair IDIQ
Solicitation # N421582245004
Norfolk Naval Shipyard Gf

POSTED

over 4 years ago

CLOSED

over 4 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS