Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

CESCO Water Blast System OEM Service & Technical Training

Active

Federal

Response Deadline09/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense involves providing OEM service and technical training for CESCO water blast booths, pressure washers, and recirculation systems at the Letterkenny Army Depot in Chambersburg. The scope of work includes annual evaluations, preventative maintenance, and the servicing of wastewater treatment systems, as well as the replacement of belts and filters and the repair of pressure pots and water blast guns. To qualify, the provider must be CESCO Inc. certified and maintain strict compliance with LEAD Regulation 385-1. The primary objective is to ensure the delivery of fully operational systems and the provision of certified staff to support prime contractors on site.

General Info

CESCO certified service and technical training for water blast systems at Letterkenny Army Depot.

Agency

Department Of Defense → W6QK Lad Contr OfficeView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Chambersburg, PA, 17201, USA

Set-Aside

NONE

Documents

This scope was carved out of W911N2-26-Q-A011.

The full solicitation package (13 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Water Blast System Service, Repair, & Training

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 09:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Lad Contr Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Lad Contr Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs annual evaluation, preventative maintenance, and technical training for CESCO water blast booths, pressure washers, and recirculation systems for prime contractors on Army Letterkenny Army Depot projects. Services wastewater treatment systems, replaces belts and filters, and repairs water blast guns and pressure pots. Requires CESCO Inc. certification and compliance with LEAD Regulation 385-1. Delivers fully operational systems and certified staff.

Similar Contracts

Same NAICS industry code

RFQ#3857 Replace Walk-In Cooler and Freezer Doors

Solicitation # RFQ#3857

Management & Training Corporation (MTC) is soliciting bids under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, equipment, and supervision to remove and dispose of existing doors and install one walk-in cooler door and two walk-in freezer doors. This includes the installation of all necessary hardware such as hinges, latches, gaskets, closers, and thresholds, with final acceptance based on proper alignment, airtight sealing, and adherence to OSHA and refrigeration industry standards. The contractor must provide a minimum one-year workmanship warranty and manufacturer warranties. The contract is a lump sum fee-for-service agreement under NAICS code 811310. It is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification form, proof of insurance, and three references by September 28, 2026. Award will be based on best value as determined by MTC. Compliance requirements include adherence to Service Contract Labor Standards under Wage Determination 2015-4347, FAR clauses regarding the prohibition of trafficking in persons, and strict government guidelines for protecting sensitive or proprietary information. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.

Management & Training Corporation

POSTED

about 3 hours ago

DEADLINE

JWCE Grinder Technical Services (Maintenance, Inspection, and Repair)This subcontract for the City of Atlanta involves providing specialized technical services for JWC Environmental grinders on Department of Watershed projects. The scope of work includes performing comprehensive maintenance, inspections, and repairs, as well as the physical replacement of failed units using industrial diagnostic equipment. To ensure quality and compliance, the contractor must hold the required technical certifications to service JWCE equipment and is responsible for delivering fully operational systems along with detailed repair logs. The opportunity is categorized under NAICS code 811310 and was posted on September 15, 2026, with a response deadline of September 25, 2026. This engagement is designed for providers capable of supporting prime contractors through scheduled preventative maintenance and the mechanical repair of malfunctioning units within the Georgia region.

City of Atlanta

POSTED

about 14 hours ago

DEADLINE

MS-IFB/DWM/2608-1270038/JWC Environmental (JWCE) Grinders, Parts, and Ancillary

Solicitation # PE-66062-NONST-2027-000000475

The City of Atlanta Department of Watershed is seeking a qualified candidate under solicitation number PE-66062-NONST-2027-000000475 to provide grinders, parts, equipment, and ancillary associated services. The scope of work focuses on the provision, maintenance, replacement, inspection, and repair of JWC Environmental (JWCE) grinders and related equipment installed at various facilities for the Office of Water Treatment and Reclamation within the state of Georgia. This solicitation was posted on September 15, 2026, with a response deadline of September 25, 2026. The procurement is managed by the City of Atlanta as a SLED organization, with Shannon Hill serving as the primary point of contact. Interested parties must submit their responses by the specified deadline to be considered for the supply and servicing of these critical water treatment components.

City of Atlanta

POSTED

about 14 hours ago

DEADLINE

Acrulog H2S Gas Monitor Technical ServicesThis subcontract for the City of Houston involves providing technical services for the installation, factory servicing, and precision calibration of Acrulog H2S gas monitoring hardware. The scope of work specifically requires the installation of three monitors at the 11th Street Odor Control Facility, including the replacement of tubing and connections to ensure all units are fully operational and meet OEM specifications. To qualify for this project, the service provider must possess OEM certification for Acrulog equipment and utilize specialized gas calibration tools. The contract is categorized under NAICS code 811310 and is intended for prime contractors managing facility projects within the city.

City of Houston

POSTED

about 16 hours ago

DEADLINE

FY 27-016B Food Service Equipment Repair Services

Solicitation # FY 27-016B

The Bridgeton Board of Education is soliciting bids for on-call food service equipment repair services under solicitation FY 27-016B. This open-ended contract requires a contractor capable of providing a full spectrum of services for various systems, including mandatory certification as a Rational equipment Service Partner. The selected vendor must provide fixed hourly rates for both journeyman and apprentice personnel for normal business hours and after-hours services, including weekends and holidays. Additionally, the contractor must provide a percentage markup or discount based on their actual cost for materials and parts, with a requirement to produce original invoices within two business days upon request. The Board estimates annual service needs at up to 150 hours per category for both journeymen and apprentices, with material costs estimated between zero and 10,000 dollars, though these figures are informational and do not guarantee minimum volumes. Key operational requirements include a maximum technician response time of two hours and a requirement to notify the District when traveling to a school for repairs. The contract will be awarded to the lowest responsible bidder, and the successful vendor must adhere to all prevailing wage requirements, the Americans with Disabilities Act, and New Jersey state laws regarding affirmative action and business registration. Bidders must submit a bid bond of 10 percent of the total contract, not to exceed 20,000 dollars, and provide a performance bond upon award. All bids must be submitted in a sealed envelope by September 29, 2026, and must include original blue ink signatures. Payment is typically rendered within 30 to 60 days following the satisfactory completion of services and submission of invoices to the Business Office.

POSTED

about 17 hours ago

DEADLINE

Emergency Generator Repair Services

Solicitation # 2432

The Township of Wayne, New Jersey, is soliciting bids for an open-ended contract for Emergency Generator Repair Services. The contract aims to secure a provider capable of maintaining a minimum of three trained technicians and equipped service trucks to ensure a maximum two-hour emergency response time, 24 hours a day. The selected contractor must also provide mobile generators with self-contained fuel for immediate delivery to non-working sites. The initial term is up to one year, with the possibility of three additional one-year extensions. Awarding will be based on the lowest responsible and responsive bidder, primarily evaluating hourly repair costs and parts discounts. Bidders must submit their proposals electronically via the OpenGov Procurement portal by September 30, 2026, at 11:00 am. Required submission materials include a bid deposit of 10 percent of the total bid (capped at 20,000 dollars), a non-collusion affidavit, and an acknowledgement of principal. Compliance with New Jersey prevailing wage laws and a valid Public Works Contractor Registration are mandatory. Additionally, the contractor must adhere to strict safety and labeling standards under the New Jersey Worker and Community Right to Know Act and provide performance and payment bonds upon award. All work must comply with federal, state, and township regulations, including HIPAA and the Americans with Disabilities Act.

Purchasing Division

POSTED

about 18 hours ago

DEADLINE

DBH - NBH GXT4-72VBATT Cabinets and Installation Services

Solicitation # SRC0000041388

The Ohio Department of Behavioral Health is seeking a Vertiv factory-trained and authorized technician or approved service provider to perform battery installation and disposal services at the Northcoast Behavioral Healthcare Hospital in Northfield, Ohio. The scope of work includes the installation of 23 GXT4 72V RT EBC units, the replacement of 23 internal batteries, and the proper disposal of old units. Technical requirements are extensive, involving the verification of battery rack integrity, measuring open circuit voltages, applying anti-corrosion inhibitors, torquing connections to manufacturer specifications, and commissioning the Alber monitor. The contract will be awarded to the lowest-cost responsive and responsible supplier, and all bids must be submitted through OhioBuys with a corresponding Statement of Work. Pricing must be comprehensive, covering delivery, setup, and warranty, with specific line items for the battery kits, external cabinet installation, internal battery installation, and freight. Only approved Vertiv partners or certified engineers are eligible to respond to this solicitation.

Dmh104200 Financial Management Jrst11, Dmh621090 Nor Information Svcs Office Ncbh

POSTED

about 18 hours ago

DEADLINE

Preventative Maintenance for X5-1316T Mini Grand Pro Box Making MachinesThis subcontract involves providing onsite preventative maintenance for two X5-1316T Mini Grand Pro Box Making Machines, identified by serial numbers 1316TNKC171001 and 1316TNKC171002, at the NARA Conservation Laboratory in College Park, Maryland. The selected contractor must utilize model-specific diagnostic equipment and provide documented proof of their ability to service this particular machinery model. The scope of work includes the execution of specific maintenance protocols and the delivery of comprehensive service and inspection reports. This opportunity is managed by the National Archives and Records Administration under NAICS code 811310, with a response deadline of September 17, 2026.

Nara Contracting Office

POSTED

about 19 hours ago

DEADLINE

Sonoplex System Installation and Technical SupportThis subcontract for the Department of Defense involves the installation of Jumbo Switches for prime contractors supporting Department of the Air Force 54th OSS projects. Work will be performed at Holloman Air Force Base, specifically across GART, Tower, Comm Node, and RAPCON sites. The scope of work includes delivering an operational system upgrade, providing ongoing support, and conducting technical training for Air Force personnel. The contract is designated as a total Small Business Set Aside under NAICS code 811310. To be eligible, the provider must be qualified to deliver TC Communications equipment training and strictly adhere to Personal Identity Verification of Contractor Personnel requirements. The solicitation was posted on September 15, 2026, with a response deadline of September 18, 2026.

FA4801 49 Cons Pk

POSTED

about 19 hours ago

DEADLINE

Security Systems Sustainment & MaintenanceThe Security Systems Sustainment and Maintenance subcontract is issued by the Department of Defense under the FA2381 Force Protection Aflcmc/hbuk agency. The primary objective of this engagement is to provide comprehensive maintenance, repair, and sustainment services for physical and electronic security systems supporting prime contractors on Air Force Life Cycle Management Center projects. The scope of work includes performing preventative maintenance, troubleshooting technical issues, replacing hardware, and implementing system updates for force protection assets to ensure all security systems remain fully operational. This effort falls under NAICS code 811310 and is centered in the 01731 zip code area.

FA2381 Force Protection Aflcmc/hbuk

POSTED

about 19 hours ago

DEADLINE

Air Motor Repair and RefurbishmentThis subcontract involves the repair and refurbishment of four pneumatic motor units used for the custom SkyClimber scaffold system at the International Boundary and Water Commission Falcon Dam Field Office. The contractor will utilize pneumatic repair tools and testing rigs to restore the units to operational readiness, ensuring they are certified for use during spillway gate inspections. The project is categorized under NAICS code 811310 and is located in Falcon Heights, Texas. The primary objective is the delivery of four fully repaired and certified operational air motor units to support prime contractors on the site.

Internat Boundary And Water Commission

POSTED

about 19 hours ago

DEADLINE

Autoclave Installation and Technical TrainingThis subcontract for the USDA Agricultural Research Service involves the on-site installation and technical training for autoclave equipment at the Water Quality and Ecology Research Unit in Oxford, Mississippi. The selected provider will be responsible for connecting equipment to 208V 3-phase power and conducting essential pressure and cooling system tests to ensure the units are fully operational and meet all manufacturer specifications. A critical requirement for this project is that the contractor must hold the appropriate electrical licensure to handle 3-phase power installations. The final deliverables include a fully tested and functioning autoclave system along with comprehensive training for the staff. This opportunity is categorized under NAICS code 811310, with a response deadline of September 24, 2026.

USDA Ars Afm Apd

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Lad Contr Office

Same awarding agency

High-Pressure Piping and Vessel MaintenanceThis subcontract for High-Pressure Piping and Vessel Maintenance involves performing specialized inspection and repair of process piping, pressure pots, and high-pressure water lines for prime contractors at the Letterkenny Army Depot in Chambersburg. The scope of work includes servicing filtration banks and replacing high-pressure hoses using specialized pressure testing equipment to ensure all delivered systems are certified leak-free. All work must strictly adhere to ASME B31.3 and AWS D1.1/D1.1M welding codes. This opportunity is managed by the Department of Defense under the W6QK Lad Contr Office, falling under NAICS code 238220. Interested parties must respond by September 21, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 19 hours ago

DEADLINE

Water Blast System Controls Programming and IntegrationThis subcontract for the Department of Defense involves providing programming, calibration, and integration services for water blast and ventilation system controls at the Letterkenny Army Depot in Chambersburg. The selected provider will work with prime contractors to adjust system coordination for pressure wash and water treatment systems using PLC programming software, ensuring the final delivered control system meets all technical specifications. All work must strictly adhere to NFPA 70 and NEMA 250 standards. The opportunity is categorized under NAICS code 541512 and is managed by the W6QK Lad Contr Office. Interested parties must submit their responses by September 21, 2026.

Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

Water Blast System Service, Repair, & Training

Solicitation # W911N2-26-Q-A011

The contract, identified as W911N2-26-Q-A011, is a sole-source, indefinite-delivery/indefinite-quantity (IDIQ) firm-fixed-price agreement for annual preventive maintenance, repair, and training services on water blast systems at Letterkenny Army Depot in Chambersburg, Pennsylvania. The base performance period runs from August 24, 2026, to August 23, 2027, with four additional one-year option periods extending through August 23, 2031, for a potential total contract value between $20,000 and $250,000. Services encompass comprehensive evaluation, maintenance, and restoration of water blast systems, pressure pots, handheld guns, and recirculation systems to 100% operational status, including the training of depot technicians on safety, operation, and certification. All work is governed by the Performance Work Statement and must comply with OSHA, NFPA 70, ASME B31.3, NEMA 250, and LEAD Regulation 385-1 standards, with 100% Acceptable Quality Level required for deliverables. The contractor must be registered in SAM.gov and must provide all labor, tools, materials, and travel expenses under a firm-fixed-price structure without discussions, indicating a Lowest Price Technically Acceptable award approach. Performance is restricted to standard work hours on weekdays, excluding federal holidays, and requires pre-visit coordination with government representatives. All personnel must undergo background checks, complete AT Level I, iWATCH, and OPSEC training within 30 days of assignment, and adhere to strict physical security and hazardous material handling protocols with full compliance to GHS and HazCom labeling. Payment will be processed via Wide Area WorkFlow using Electronic Funds Transfer through the Defense Finance and Accounting Service, and the Contracting Officer’s Representative and Technical Point of Contact will oversee inspection, acceptance, and compliance with the Quality Assurance Surveillance Plan. A Contract Manager must be designated and approved by the government, and any organizational conflicts of interest must be disclosed and mitigated immediately. The contract includes no set-aside provisions, and while socioeconomic categorization and size status are solicited, no offeror responses have been documented. The contract’s unique requirements also mandate strict environmental compliance, immediate reporting of incidents, certified equipment inspections, and adherence to DoD-access policies for unbadged personnel.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

Manufacturing and Supply of Electrical Conduit AdaptersThis subcontract with the Department of Defense, managed by the W6QK Lad Contr Office, involves the manufacturing and supply of 43 precision-machined electrical conduit adapters for prime contractors on Army projects. The contractor is required to fabricate part number 5975-01-302-9631 using Zeel-size brass commercial rod, bar, or semilikos tubing in accordance with Drawing 10250676. All units must adhere to IUID and Government-Assigned Serial Number requirements, with performance taking place in Chambersburg, Pennsylvania. The contract is designated as a total Small Business Set Aside under NAICS code 332710. To maintain eligibility and compliance, the provider must meet strict cybersecurity standards, specifically NIST SP 800-171 and DFARS 252.204-7012. The solicitation was posted on September 14, 2026, with a response deadline of September 21, 2026.

POSTED

DEADLINE

ADAPTER, ELECTRICAL CONDUIT,

Solicitation # W911N2-26-Q-A068

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Radiographic Testing (RT) of a large aluminum weldment

Solicitation # W911N226QA069

The Army Contracting Command at Letterkenny Army Depot is seeking sources for radiographic testing of large aluminum weldments, measuring approximately 14x11x4 feet with weld joints between 1.5 and 2.0 inches thick. The project involves 18 total units, with three requiring 100 percent testing (approximately 230 shots each) and 15 requiring standard testing (approximately 37 shots each). The work is expected to span from late 2026 through 2031 and must be performed on-site at the depot. Selected providers must be capable of deploying within 24 hours of notification and providing real-time on-site image evaluation to prevent production delays. The contractor is responsible for all equipment and must comply with specific military and ASTM standards, including MIL-STD-3057 and ASTM E1742. Interested businesses under NAICS 541380 must submit a capabilities statement by September 29, 2026, detailing their technical approach, personnel certifications, and a rough order of magnitude for pricing.

Testing Laboratories and Services

POSTED

DEADLINE

X-Ray Replacement Parts & Components SupplyThis subcontract opportunity, managed by the Department of Defense W6QK Lad Contr Office, involves the supply of OEM or approved replacement parts for RMIS Cabinet X-Ray machines. The scope of work includes providing X-ray tubes, sensors, safety interlock switches, and electronic components for the MP1 interface to support prime contractors delivering services to the Army Letterkenny Munitions Center. All hardware must be delivered to the LEMC FOB Destination in Chambersburg, Pennsylvania. The contract is designated as a total Small Business Set Aside under NAICS code 423450. Suppliers must strictly adhere to Buy American requirements and foreign source prohibitions. Interested parties must respond by September 18, 2026, following the posting date of September 8, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Industrial Cooling & Chiller MaintenanceThis subcontract for Industrial Cooling and Chiller Maintenance supports prime contractors at the Army Letterkenny Munitions Center in Chambersburg, Pennsylvania. The scope of work involves specialized maintenance and cleaning of X-ray system cooling and chiller components, including cleaning oil coolers, tightening hardware, and verifying chiller compressor cut-off sensor values at 23 degrees Celsius using industrial chiller tools. The final deliverable is a fully cleaned and calibrated cooling system. The opportunity is a total Small Business Set Aside under NAICS code 238220 and is managed by the Department of Defense W6QK Lad Contr Office. Personnel must obtain PIV verification for site access. The response deadline for this requirement is September 18, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

X-Ray System Maintenance & Technical ServiceThis subcontract for X-Ray System Maintenance and Technical Service involves performing semi-annual preventative maintenance, inspections, and technical repairs on the RMIS Cabinet X-Ray machine at the Army Letterkenny Munitions Center in Chambersburg. The scope of work includes testing safety interlocks, E-stops, and chiller compressor cut-off sensors via the MP1 control interface, as well as executing any necessary over and above repairs to ensure a fully operational system. The contract is a Small Business Set Aside under NAICS code 811310 for the Department of Defense. To be eligible, providers must meet strict security and compliance requirements, including PIV verification, CMMC compliance, and a DD254 security clearance. The final deliverables consist of comprehensive inspection reports and the successful maintenance of the operational system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Rocket Motor Inspection System (RMIS) CABINET X RAY MACHINE SERVICE

Solicitation # W911N226QA061

Solicitation W911N226QA061 is a combined synopsis and request for proposal issued by the Department of Defense, specifically the W6QK Lad Contr Office, for an Indefinite Delivery Indefinite Quantity contract. The objective is to secure professional services for the repair and preventative maintenance of the Rocket Motor Inspection System (RMIS) Cabinet X-Ray non-destructive testing equipment located at the Letterkenny Munitions Center in Chambersburg, Pennsylvania. This requirement is designated as a total set-aside for small businesses under NAICS code 541380 and follows FAR Part 12 commercial procedures. The contract features a five-year ordering period with an estimated performance window from September 29, 2026, through September 28, 2031. Award evaluation will be based on technical capability, past performance, and price, with pricing structured through Contract Line Item Numbers for both scheduled preventive maintenance and over-and-above repairs. The selected contractor will be responsible for staffing, detailed documentation of all maintenance activities, and strict adherence to security and background check requirements for site access. Responses are due by September 18, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Warehouse Asset Tracking Hardware (RFID & Barcode)This subcontract opportunity with the Department of Defense involves the supply and installation of asset tracking hardware for prime contractors at the Letterkenny Army Depot in Chambersburg, Pennsylvania. The scope of work includes configuring wireless barcode scanners and installing RFID asset tracking sensors and antennas, ensuring all hardware is integrated with WMS software for real-time data capture. All equipment must comply with Army depot security and safety requirements to deliver a fully calibrated infrastructure. The project is categorized under NAICS code 334290 and is managed by the W6QK Lad Contr Office. Interested parties must submit their responses by October 1, 2026, following the posting date of July 2, 2026.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Warehouse Management/Execution Software SolutionThis subcontract opportunity, managed by the W6QK Lad Contr Office for the Department of Defense, involves providing and implementing a Warehouse Management System, Warehouse Execution System, or Warehouse Control System software solution for modernization projects at the Letterkenny Army Depot in Chambersburg. The selected provider will be responsible for configuring software to handle location control, task interleaving, labor management, and slotting optimization, while ensuring seamless integration with ASRS hardware and the Logistics Modernization Program. The project requires strict adherence to Army cybersecurity standards for operational technology to deliver a fully operational software suite. Interested parties must respond by October 1, 2026, under NAICS code 541511.

Custom Computer Programming Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS