CGC EDISTO Dry Dock Repairs

This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Oakland, CA to identify sources capable of providing the following: DRYDOCK Repairs Specification: (Subject to change at the discretion of the Government) Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC EDISTO (WPB-1313), a 110-Foot "A Class" Patrol Boat, home ported in 2710 North Harbor Drive, San Diego, CA 92101. All work will be performed at the CONTRACTOR'S FACILITY. This vessel is geographically restricted to United States West Coast San Francisco Bay and South. Scope of Work: The scope of the acquisition is for the DRYDOCK repairs of the USCGC EDISTO (WPB-1313). This work will include, but is not limited to the following WORK ITEMS: Hull Plating (Side Scan), Ultrasonic Testing Hull Plating, U/W Body, Inspect Hull Plating (Freeboard), Ultrasonic Testing Aluminum Hull and Structural Repairs - 1/4" Plate Aluminum Hull and Structural Repairs - 3/16" Plate Aluminum Hull and Structural Repairs - 5/16" Plate Hull and Structural Plating Repairs -Crack (Aluminum) Hull and Structural Plating Repairs - Crack (Steel) Hull and Structural Plating Repairs - Eroded Weld (Aluminum) Steel Hull and Structural Plating Repairs (5-Pound) Steel Hull and Structural Plating Repairs (7.0 Pound, 7.5-Pound or 7.65-Pound) Steel Hull and Structural Plating Repairs, Corrugated Plate (4.0-Pound) Hull and Structural Plating Repairs (6.0-Pound or 5.63-Pound) Hull and Structural Plating - 10.0-Pound Steel, Repair Appendages (U/W), Leak Test Appendages (U/W) - Internal, Preserve Voids (Non-Accessible), Leak Test Tanks (MP Fuel Stowage and Overflow), Clean and Inspect Voids (Non-Accessible), Preserve Internal Surfaces Tanks (MP Fuel Service), Clean and Inspect Tanks (Potable Water), Clean and Inspect Tanks (Dirty Oil and Waste), Clean and Inspect Propulsion Shafting, Remove, Inspect, and Reinstall Propulsion Shafting, Renew Mechanical Shaft Seal Assemblies, Overhaul Propulsion Shaft Bearings (External), Renew Propulsion Shaft, Stern Tube Forward Bearing, Renew Propulsion Shaft, Forward Bearing Housing, Stern Tube Bearing, Renew Propellers; Remove, Inspect, and Reinstall Exhaust System, MDE, Inspect SW Heat Exchangers; Clean, Inspect and Hydro Fathometer Transducer, Renew Speed Doppler, Renew, Doppler Valve, Overhaul Sea Valves and Waster Pieces, Overhaul, Renew Sea Strainers (All Sizes), Renew Sea Strainers - Duplex (All Sizes), Overhaul Salt Water Cooling and Steering System Piping, Renew Steering Gear (General), Overhaul Rudder Assembly, Remove, Inspect and Reinstall Elecro-Hydraulic Crane, Renew Fin Stabilizers (General), Overhaul Tanks, (Grey Water) Clean and Inspect Tanks, (Sewage Holding) Clean and Inspect Grey Water Piping, Clean and Flush Sewage Piping, Clean and Flush Tanks (Sewage Holding), Preserve "100%" Tanks (Aft Grey Water), Preserve "Partial 33%" Tanks (Dirty Oil), Preserve " Partial" Tanks (Oily Water), Preserve "Partial 33%" Tanks (Potable Water), Preserve "100%" Bilge Surfaces, Preserve Magazine Locker, Preserve and Insulate U/W Body, Preserve ("100%") Used with Side Scan) Stern Tube Interior Surfaces, Preserve 100% Hull Plating Freeboard, Preserve - Partial Superstructure, Preserve "Partial" Cathodic Protection System (Bilge and Sea Chest), Renew Cathodic Protection System, Inspect and Maintain CAPAC Anode Assembly Renew Insulation, (Eng Compt) Bulkhead/Overhead, Renew Drydocking Temporary Services, Provide Data Service, Provide Watertight Doors and Scuttles (External), Renew Deck Covering (Carpeting), Renew Sea Chests, Repairs Sea Trial Performance, Provide Support 5 Main Mast, Preserve, (100%) All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Anticipated Period of Performance: The period of performance is anticipated to be for FIFTY-EIGHT (58) calendar days from 15 January 2014 and end date of 14 March 2014. (Subject to change at the discretion of the Government). Anticipated NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to contact@example.gov (Attn: Bernie Caguiat/C&P1-PBPL) no later than July 29, 2013 at 10:00AM, Pacific Time with the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HubZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA. c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business as a Joint Venture or any other type of teaming agreement, they shall provide past performance on projects of similar scope that they have performed together as a Joint Venture. Providing individual past performance documentation from each company on separate projects where the two did not work together is not considered to be sufficient past performance. A Joint Venture that cannot provide this requested information will not be considered to have sufficient documentation needed to evaluate past performance as an evaluation factor. SAM (CCR): Interested parties should register in the System for Award Management (SAM) formerly known as Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov or by calling +1 (555) 000-0000. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to submit information in sufficient detail may result in considering a company as not a viable source and may influence competition and set-aside decisions. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.