Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Commercial Subcontracting Support for Government Contracts

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract provides subcontracting support for the procurement and delivery of commercial off-the-shelf restraint systems to a prime contractor under FAR 12 and DFARS clause 252.244-7999, ensuring compliance with federal acquisition regulations for commercial items. The work supports the Department of Defense’s need for certified, standardized safety restraints developed and manufactured as commercial products, with the subcontractor responsible for meeting all technical, logistical, and regulatory requirements outlined in the applicable clauses. Delivery of these items is targeted to the location in Silverdale, Washington, with the zip code 98315-2000 designated as the place of performance. The solicitation is open for responses until August 17, 2026, with the request posted on August 4, 2026, and falls under the NAICS code 423990, which covers miscellaneous durable goods merchant wholesalers. There is no set-aside designation or specific small business preference indicated, and the contracting activity is administered by C AND T SUPPLY CHAIN within the Department of Defense. The subcontractor must operate in full alignment with commercial item acquisition procedures, including documentation, pricing transparency, and warranty terms typical of COTS products, while maintaining all necessary certifications to ensure seamless integration into government-furnished systems.

General Info

Subcontractor to deliver COTS restraint systems to Silverdale, WA, under FAR 12 and DFARS by August 17, 2026.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

423990 - Other Miscellaneous Durable Goods Merchant WholesalersView NAICS

Place of Performance

SILVERDALE, WA, 98315-2000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → C AND T SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → C AND T SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Subcontracting support for commercial off-the-shelf (COTS) restraint systems under FAR 12 and DFARS clause 252.244-7999, enabling delivery of compliant commercial items to the prime contractor.

Similar Contracts

Same NAICS industry code

NAICS: 423990
New
DIBBS
HARNESS, SAFETY, INDUSTR
Solicitation # SPE8E9-26-T-3363
This contract, issued under solicitation SPE8E9-26-T-3363 by the Defense Logistics Agency’s Construction & Equipment MRO SVC I office, is a small business set-aside for the procurement of 566 industrial safety harnesses with NSN 4240-01-544-3376. The item must comply with CID A-A-59867A Revision A dated July 29, 2022, and the latest revision of ANSI Z359.11, with only approved sources permitted: MINE SAFETY APPLIANCES COMPANY part number 10067411 and TECHNICAL ASSOCIATES INC part number NS950BDU. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the harnesses, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA Packaging Requirements (RP001) for palletization, with special marking code 00-00 indicating no special requirements. Delivery is required 107 days after receipt of order, with FOB origin terms and shipment to DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance occur at destination, governed by FAR 52.246-1 and 52.246-2. The contract incorporates numerous DFARS and FAR clauses addressing cybersecurity, hazardous materials, whistleblower rights, export controls, and supply chain restrictions, including the prohibition of covered defense telecommunications equipment and the safeguarding of covered defense information. Compliance with NIST SP 800-171 is required under deviation 2026-O0025, and contractors must submit Safety Data Sheets prior to award. Additive manufacturing is prohibited unless explicitly authorized. Payment must be processed electronically via WAWF using the prescribed invoice and receiving report formats. All offers must be submitted through DIBBS by the deadline, and offerors must maintain current SAM registrations confirming small business status, telecommunications equipment disclosures, and other representations.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423990
New
SLED
Miscellaneous Auto and Shop Supplies
Solicitation # 250457
The Orange County Transportation Authority is soliciting bids for Miscellaneous Auto and Shop Supplies under solicitation number 250457, with a total budget of $500,000.00 allocated for a two-year contract term. The opportunity is open to qualified contractors, and responses must be submitted by September 1, 2026, at 6:00 PM Pacific Time. The NAICS code for this procurement is 423990, indicating it falls under Other Miscellaneous Durable Goods Merchant Wholesalers, and it is categorized as a state, local, or educational government procurement. The contract will be administered by the F&A-Contracts Administration and Materials Management division within the State of California, with performance expected to take place in California. All inquiries and communications should be directed to Carolyn Baltazar, Senior Buyer, who can be reached via email at cbaltazar@octa.net or by phone at 714-560-5499. The bidding process is conducted through the Orange County Transportation Authority’s procurement portal, and all interested parties must access the solicitation details via the provided UI link. The posting date for this opportunity is August 4, 2026, and no set-aside classifications are applicable, meaning the contract is open to all eligible bidders regardless of business size or ownership status. Vendors are encouraged to review the full solicitation materials and ensure compliance with all submission requirements prior to the deadline.
F&A-Contracts Administration and Materials Management

POSTED

1 day ago

DEADLINE

in 26 days
View Details

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

NAICS: 313210
New
DIBBS
WEBBING, TEXTILE
Solicitation # SPE1C1-26-Q-0401
The contract specifies the procurement of textile webbing with part number 406701000OD7 and NSN 8305-01-690-3011, manufactured by Bally Ribbon Mills under CAGE code 83435. The product must meet strict technical specifications including a width between 0.9375 and 1.0625 inches, a minimum thickness of 0.038 inches, a maximum weight of 0.71 ounces per square yard, and a minimum breaking strength of 1200 pounds. It is a plain weave design with a two-up, two-down binder weave, using 840 denier ground and binder yarns and 420 denier filling yarns. The contract requires full compliance with DLA’s technical and quality requirements referenced by R and I numbers, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129 without special identification. The item is subject to Covered Defense Information regulations and must be delivered to Arizona Industries for the Blind in Phoenix, Arizona. The contract is a firm fixed price agreement for a quantity of 4 railroad-length units, with a permissible quantity variance of plus or minus 2%. The delivery deadline is 120 days after the order date, and both inspection and acceptance occur at the destination port. Packaging, palletization, and shipping must conform to DLA’s packaging requirements and applicable transportation notes C19 and C20. The purchase request number is 7017748840, with a required ship date of January 15, 2027. The solicitation was issued under contract number SPE1C1-26-Q-0401 with a response deadline of August 19, 2026, and is managed by the Department of Defense through C & T Supply Chain. All unit of issue and purchasing requirements align with DoD authorized standards as referenced through official DLA documentation.
Broadwoven Fabric Mills

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 313310
New
DIBBS
TAPE, TEXTILE
Solicitation # SPE1C1-26-T-1595
The contract specifies the procurement of a flat textile tape measuring 0.312 inches in width, with mandatory non-melting and reinforcing features provided by the Normex material, conforming to MIL-T-38328 Part Number 1843, manufactured by Bally Ribbon Mills under CAGE code 83435 in sage green. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is identified by NSN 8315-01-523-8568, with a fixed quantity of 2 yards, no variance allowed, and must be delivered FOB origin within 20 days of contract award. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, including the special marking code ZZ, with palletization complying with DLA packaging standards and preservation procedures aligned with ASTM-D-3951. The delivery destination is a military facility in Poprad, Slovakia, with shipment coordinated by freight forwarder DF Young Inc. The contract is issued under solicitation SPE1C1-26-T-1595, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Government-specific identifiers and controlled information apply per RD003, and all documentation must satisfy Source Approval Request requirements under RC001.
Textile and Fabric Finishing Mills

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 313210
New
DIBBS
CLOTH, DUCK
Solicitation # SPE1C1-26-Q-0400
The contract specifies the manufacture of nylon duck cloth meeting PIA-C-7219, the most current revision, with a National Stock Number of 8305-00-445-7825. The fabric must weigh no more than 9.5 ounces per square yard before treatment, measure 45 inches in width, and be colored Orange 70072 on both sides using the standard color reference from the Color Association of the United States. The material must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. All shipments require comprehensive quality documentation including test reports and component certifications per DPSCM-4155.3, and sources of raw materials must be identified and cannot be altered without prior written approval from the DLA Troop Support Contracting Officer. Packaging and labeling must adhere strictly to ASTM-D-3951 and PIA-C-7219, with all items palletized on four-way entry pallets per MIL-STD-147E and bonded with approved materials. Each unit container, intermediate container, and exterior container must display the NSN, manufacture date, and lot number per MIL-STD-2073-1E, and be labeled with a DOD-compliant barcode using the 13-digit NSN and a government-assigned 12-digit UPC. Barcodes must be clearly readable, placed so they remain visible when folded and packaged, and must not damage the product. Type VII or Type VIII pressure-sensitive labels per MIL-DTL-32075 must be used depending on whether the item is bagged or bundled. Pallet loads must contain only one NSN per carton, with exceptions for one short or over carton clearly marked. All packaging and marking must follow MIL-STD-129 and AIM BC1 standards. The contract is firm fixed price for 500 yards with a 2% variance, delivery is FOB destination within 120 days, and inspection and acceptance occur at destination under FAR 52.246-2, replacing any outdated standards like MIL-STD-105E.
Broadwoven Fabric Mills

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
LINER, FLYER'S HELME
Solicitation # SPE1C1-26-T-1594
The contract pertains to the procurement of Flyer’s Helmet Liners, designated under multiple part numbers and NIINs, with the specific item being NSN 8415-01-682-0844, corresponding to PFG-5-4013-2. A total of three units are required at a unit price of $3.00, with the total contract value reflecting this amount. Delivery is required within 20 days of contract award, FOB destination, with no tolerance for quantity variance. Inspection and acceptance occur at the delivery point, and packaging must comply with federal and military standards, including MIL-STD-129 for marking, ASTM D3951 for commercial packaging unless hazardous, in which case TQ requirement IP025 applies. All packaging must adhere to DLA’s RP001 palletization guidelines and be labeled with the specified Unit of Issue and Quantity per Unit Pack. The shipment must not be sent via parcel post and is to be delivered to the specified military installation address in Egg Harbor Township, New Jersey. Freight shipping and parcel post addresses are provided, with the former for official logistics use. The contract references a traced shipping method and includes government-specific identifiers such as DIC, DIST, and ADV codes, with a required delivery date of July 29, 2026, and a solicitation issued under SPE1C1-26-T-1594 by the Department of Defense through C and T Supply Chain. The primary point of contact is Jennifer Scarpello, with safety and protection-related inquiries directed to her email. The item is categorized under NAICS 315990 and involves covered defense information, requiring appropriate handling and security protocols.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 313210
New
DIBBS
CLOTH, GLASS
Solicitation # SPE1C1-26-Q-0399
The contract pertains to the procurement of 9 linear yards of Quartz Basic Cloth, Plain Weave, identified by NSN 8305-01-649-1309 and part number 4581-50-9827, supplied by JPS Composite Materials Corp. dba JPS Glass. The material must conform to SAE ASTM 3846 Revision D reaffirmed in 2013-07 and is designated as Astroquartz III repair material with an epoxy-based resin finish. The unit of issue is the yard, with firm fixed pricing and zero variance allowed on quantity. Delivery is required within 120 days after award, with inspection and acceptance points at the destination, and FOB terms specified as destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization governed by DLA Packaging Requirements, and the DLA Master List of Technical and Quality Requirements supersedes all other standards. Component sources must be identified and cannot be altered without written approval via contract modification. Test reports and certifications per DPSCM-4155.3 are required for all lots. The material must be shipped by traceable means, explicitly prohibiting parcel post, to the designated military logistics address at Creech Air Force Base. The contract references the updated DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 (August 2021) and includes the Certificate of Conformance clause. Compliance with SAE AMS-STD-595 for color standards is required, as the legacy Fed-Std-595C has been canceled. Shipping is to be coordinated under two separate line items for 5 and 4 yards respectively, with delivery deadlines set for March and June 2026.
Broadwoven Fabric Mills

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 313210
New
DIBBS
CLOTH, DUCK
Solicitation # SPE1C1-26-Q-0398
The contract specifies the manufacture of 500 square yards of nylon duck cloth meeting PIA-C-7219, the most current revision, with a maximum weight of 9.5 ounces per square yard before treatment, a nominal width of 45.0 inches, and a color of Orange 70072 on both sides, sourced from the Color Association of the United States. The material must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, and all components must be traceable to their source materials, with no substitutions allowed without prior written approval from the DLA Troop Support Contracting Officer. Every lot requires test reports and certifications under DPSCM-4155.3, and the contractor assumes full responsibility for all inspection, examination, and testing, though the Government retains the right to conduct its own verification. Packaging and labeling must strictly adhere to ASTM D-3951, MIL-STD-2073-1E, PIA-C-7219, and MIL-STD-129, including pressure-sensitive labels with barcodes for the 13-digit NSN and government-assigned 12-digit UPC, both clearly visible and scannable when folded and packaged. Labels must not damage the product, with Type VII or Type VIII labels used depending on whether the item is bagged or bundled. All palletized shipments must be on four-way entry pallets in compliance with MIL-STD-147E, bonded with approved materials, and contain only one NSN per carton, with quantities clearly marked as “SHORT” or “OVER” if deviations occur. Each container must bear the NSN, manufacture date, and lot number. Delivery is FOB destination within 120 days of award, with inspection and acceptance occurring at the destination under FAR 52.246-2. Pricing is firm fixed price with a 2% variance allowed on quantity, and all specifications must be met without exception to ensure full acceptance.
Broadwoven Fabric Mills

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
LINER, FLYER'S HELME
Solicitation # SPE1C1-26-T-1586
The contract pertains to the procurement of Liner, Flyer’s Helmet, identified by NSN 8415-01-682-1462 and part number PFG-5-4015-2, with a total quantity of three units to be delivered within twenty days of order placement. Delivery is specified as FOB destination with no tolerance for variance in quantity, and inspection and acceptance will occur at the destination point. Packaging must comply with applicable federal standards—ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified as hazardous, with all packaging and labeling strictly following MIL-STD-129. Palletization must adhere to DLA Packaging Requirement RP001, and the unit of issue is each (EA). The shipment must not be sent via parcel post and must use traceable freight methods, directed to the designated delivery location at 400 Langley Rd, Building 52, Egg Harbor Twp, NJ 08234-9507. The contract number is SPE1C1-26-T-1586, with a required delivery date of July 29, 2026, and the procuring activity is the Department of Defense through C and T Supply Chain. The point of contact for inquiries is Jennifer Scarpello, with contact information provided for email and phone. Covered defense information potentially applies, and the contract includes internal government tracking identifiers for procurement and distribution management.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details