Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTROL ASSEMBLY, PUSH-

Active
SPE7L4-26-U-1069Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a Control Assembly, Push-Pull, identified by NSN 3040-01-297-3396, with a quantity of eight units to be delivered within 127 days after order. The solicitation number is SPE7L4-26-U-1069, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, with a response deadline of August 24, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. The item is subject to stringent cybersecurity requirements, including CMMC Level 2 certification for third-party assessment organizations, and must comply with DFARS 252.225-7048 for controlled technical data. Export control restrictions apply due to ITAR or EAR regulations, prohibiting unauthorized disclosure or export to foreign persons, regardless of location. Only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access the technical data. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval. Configuration changes must follow formal engineering change proposal procedures, and deviations or waivers require formal variance requests. All supplies must adhere to DLA packaging standards, and government identification must be removed from non-accepted items. The contract requires strict compliance with all technical, security, environmental, and export control stipulations without exception.

General Info

Procure eight push-pull control assemblies per NSN 3040-01-297-3396 by 127 days, compliant with CMMC Level 2, ITAR/EAR, and DLA standards.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-U-1069 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
Karryn Hoston
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROL ASSEMBLY,PUSH-PULL
CONTROL ASSEMBLY, PUSH-PULL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE7L4-26-U-1069
SECTION B
export-controlled data. NSN/Part Number: 3040-01-297-3396 Quantity: 8 EA Purchase Request: 1000237519QTY: 8 Delivery: 127 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
BREATHER
Solicitation # SPE7L3-26-T-168Y
This contract pertains to the procurement of one unit of item NSN 3040017239146, identified by part number 227-0590 manufactured by CATERPILLAR INC, under solicitation SPE7L3-26-T-168Y. The delivery is required within 20 days of award, with shipment to be delivered FOB origin and inspected and accepted at the destination. The item must comply with all DLA packaging requirements as specified in RP001 and MIL-STD-2073-1E, including packaging codes, materials, and marking standards per MIL-STD-129 with no special marking required. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be pre-approved unless explicitly authorized by specification. The item has no shelf life requirement. The delivery address is NMCB ONE at 477 MCKINNEY AVENUE, BLDG 200, GULFPORT MS 39501-5000, with a required shipment by the fastest traceable means—parcel post is prohibited. The purchase request number is 7017785989, and the unit of issue is EA with a total price of one dollar. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The contract is set for performance under a federal acquisition system, with the point of contact being Lee Miller at DLA, and the anticipated original delivery date is August 10, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
LEVER, MANUAL CONTROL
Solicitation # SPE7L1-26-T-944P
This contract is for the procurement of a manual control lever, identified by NSN 3040-00-330-3262 and purchase request 7017775854, with a total quantity of 51 units to be delivered FOB origin within 273 days. The item is classified as a restricted source item requiring government engineering source approval and is defined by multiple Army drawings and technical data packages, some of which specify chemical agent resistant coatings in lieu of original finish requirements. The contract enforces stringent quality and compliance standards, including adherence to MIL-STD-130N for identification marking, MIL-STD-2073-1E for packaging, and MIL-STD-1916 or equivalent zero-based sampling plans with zero non-conformances required for acceptance. All components must originate from qualified suppliers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and the use of ozone depleting chemicals is strictly prohibited. The product is designated a critical application item and must conform to ISO 9001:2015 and tailored higher-level quality requirements, with inspection and acceptance occurring at origin. The contract requires submission of a first article for approval, with specific packaging and marking instructions, including bold red “FIRST ARTICLE” labeling on the outer container and advance notice to the testing facility. Specialty metal regulations apply due to the nature of the item, and packaging must meet DLA requirements including preservation level, wrap materials, and palletization per RP001. This solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333613, with a response deadline of August 20, 2026, and unit price set at $51.00 per unit with no variance allowed in quantity.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-T-169L
The contract specifies the procurement of a shaft with a shoulder, identified by NSN 3040-01-696-8685 and part number HAN8598-1, with a single unit quantity required for delivery within 20 days after contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. All items must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking applied. Palletization must adhere to DLA packaging requirements, and shipment must be sent via traceable freight methods—parcel post is explicitly prohibited. The delivery address is the Navy Logistics Center in Mechanicsburg, Pennsylvania, and the shipment is tracked under project ZNH TP 3 with a required delivery date of June 16, 2026. The contract explicitly prohibits the use or incorporation of Class I ozone-depleting chemicals and mandates that any substitute chemicals be submitted for approval unless already authorized by specification. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with supplied hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents approved by NAVSEA, with portable fluorescent lamps and instruments containing mercury requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by acquisition size and solicitation amendments. All terms are bound to the solicitation number SPE7L3-26-T-169L, issued under the DoD’s authorized unit of issue, with primary point of contact at DLA for inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-169K
This contract is for a rigid connecting link with NSN 3040-41-000-2692 and part numbers 40009963 from General Dynamics Land Systems and Z002009-0 from Steyr Motors AG, requiring delivery of one unit within 20 days of contract award. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required and palletization adherence to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The product has no shelf life limitation. Shipment must be sent to the Military Sealift Command at 9284 Balboa Avenue, San Diego, CA 92123-5000, with transportation protocols governed by DLA procedural notes C19 and C20. The contract is tied to solicitation SPE7L3-26-T-169K, with a required delivery date of August 5, 2026, and was posted on August 9, 2026, with a response deadline of August 20, 2026. The NAICS code is 333613, and the contracting office is under the Department of Defense’s Land Supplier Operations Vehicle Support, with point of contact Lee Miller at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L3-26-T-169S
This contract solicitation under SPE7L3-26-T-169S requires strict compliance with first article testing and production lot testing protocols for item NSN/Part Number 0001S00000061, with a quantity of 29 units and a delivery timeline of 684 days ADO. The contractor must test one unit of the specified item and submit a complete first article test report within 120 calendar days of contract award, providing written notice to the contracting officer and quality assurance representative at least 14 days prior to shipment for government final acceptance testing. The government will respond within 30 days of receiving the report with conditional approval, approval, or disapproval. Production lot testing follows first article approval and requires the contractor to supply two randomly selected samples from the production lot for government testing, with sample size subject to approval if the specified quantity is ZZ. The contractor must cover all costs associated with samples consumed or destroyed during testing and ensure all units are shipped to the designated DLA facility in Columbus, Ohio, via traceable means with proper labeling and documentation including signed DD Forms 1222 and 250, test results, certifications, drawings, and a prepaid return shipping label. All documentation must comply with MIL STD 129 and include proprietary rights assertions. The solicitation is restricted to Women-Owned Small Businesses and includes no Fast Pay provision, with testing and submission procedures governed by FAR 52.209-3 and associated supplemental requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-U-0560
This contract specifies the procurement of a straight shaft with NSN 3040-01-327-0143 and part number 16-12373-000, under solicitation SPE7L1-26-U-0560, issued by the Department of Defense through the Land Supply Chain. A total of 87 units are required at a unit price of $87.00, with delivery due within 127 days after award. The contract is a total small business set-aside under NAICS code 333613, and all supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The item must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization strictly following DLA Packaging Requirements for Procurement. Government identification must be removed from non-accepted supplies, and covered defense information protections apply. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Delivery is FOB origin, inspection and acceptance occur at destination, with no variance allowed in quantity. The unit of issue is each, and all packaging must reflect the specified QUP and U/I as defined in the contract. The point of contact for inquiries is Jennifer Payne, with responses due by August 24, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
ACTUATOR, MECHANICAL, NO
Solicitation # SPE7L3-26-T-169P
This contract pertains to the procurement of a mechanical actuator with the NSN 3040-01-734-3067 and part number JE10612-101 from Juniper Elbow Co. Inc., requiring delivery of 15 units under solicitation SPE7L3-26-T-169P. The item is classified as a critical application item and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, as identified by R or I numbers. The contract explicitly prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for permitted functional uses such as in batteries, fluorescent lights, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must meet shock-proof and double-containment requirements per NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special codes applied. The units are to be delivered FOB origin, inspected and accepted at destination, with no variance allowed in quantity. The delivery deadline is 137 days from the contract award, with an original required delivery date of May 5, 2027, and a needed ship date of January 5, 2027. The consignee is DLA Distribution San Joaquin in Tracy, California, and transportation instructions follow DLAD Proc Notes C19 and C20. Item Unique Identification is not required per customer request, and the unit of issue is each, aligned with ANSI X12 standards.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4217
The contract pertains to the procurement of a GEAR CLUSTER item with NSN 3020-00-916-3550 and part number 75331-2, supplied by HONEYWELL INTERNATIONAL INC., under solicitation SPE4A0-26-T-4217. Three units are required at a unit price of $3.00, for a total price of $9.00, with delivery due within five days FOB origin. Inspection and acceptance occur at the origin, and the quantity variance is strictly zero percent, meaning no overruns or underruns are permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods, packaging materials, and coding specified, and palletization must adhere to DLA packaging requirements. Marking is to follow standard guidelines without special codes. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per customer request, with DFARS 252.211-7003(c)(1)(i) applying. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling protocols aligned to MIL-STD-1916 or ASQ H1331 Table 1, or comparable zero-based plans, where critical, major, and minor attributes are assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Documentation for source approval, cybersecurity compliance at CMMC Level 2, and removal of government identification from non-accepted supplies are required. Delivery is to be shipped to the Tainan Branch Warehouse in Taiwan, with freight details and forwarding instructions governed by DLAD procedural notices. The contract includes specific government-use codes and reference identifiers, and the required delivery date is set for September 11, 2024, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026, under the NAICS code 333613 for mechanical power transmission equipment manufacturing.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L3-26-T-170C
The contract is for six straight shafts identified by NSN 3040-00-179-7113 under solicitation SPE7L3-26-T-170C, with a delivery deadline of 79 days after order. The item falls under NAICS code 333613 and is being procured by the Department of Defense through the Land Supplier Operations Vehicle Support office. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Export control regulations apply due to the presence of technical data subject to ITAR or EAR, prohibiting any export including disclosure to foreign persons without prior authorization from the Department of State or Commerce. Only authorized DLA contractors with JCP certification, completed training on handling DOD export-controlled data, and approved access through the DLA questionnaire may receive this technical data. The solicitation opened on August 9, 2026, and responses are due by August 20, 2026, with performance location in Anniston, Alabama, and primary point of contact listed as Karen McCarley.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4218
This contract pertains to the procurement of a gear cluster identified by part number 75331-2 and NSN 3020-00-916-3550, with a single unit requirement to be delivered within five days from the origin. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined, including dry preservation and designated unit and intermediate containers. Palletization follows DLA packaging standards and no special marking is required. Inspection and acceptance occur at origin, with zero nonconformances required in sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise defined, and unspecified attributes are treated as major. The contract includes cybersecurity compliance obligations under CMMC Level 2 self-assessment and covered defense information directives. Delivery is to Tainan, Taiwan, via the Parts-Attach General Depot, with freight forwarding managed under DLA procedural notes. The contract is issued under solicitation SPE4A0-26-T-4218, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Aviation Supply Chain ESOc Buys office.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, AXLE, AUTOMOTIVE
Solicitation # SPE7L4-26-T-6210
The item being procured is a shaft, axle, automotive, identified by NSN 2520-01-696-6848, with a total quantity of 86 units, under solicitation SPE7L4-26-T-6210, which is a total small business set-aside under NAICS code 333613. The contract requires full compliance with DLA’s technical and quality standards referenced in the Master List of Technical and Quality Requirements, and includes specific provisions for inspection and acceptance at origin, removal of government identification from non-accepted supplies, and adherence to Qualified Products Lists or Qualified Manufacturers Lists for any controlled components. All technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Packaging must meet DLA procurement standards, and delivery is required within 255 days after award. The contract is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance expected at Texarkana, Texas, 75507-5000. All responses must be submitted by August 20, 2026, and the solicitation was posted on August 9, 2026. Primary point of contact is Anna-Rachelle Betts, reachable via email and phone.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
CUSHION, SEAT BACK, V
Solicitation # SPE7L4-26-T-6215
The item is a cushion for a seat back, designated with NSN 2540-01-659-1000, and is being procured in a quantity of one unit under purchase request 7017784238. The solicitation number is SPE7L4-26-T-6215, posted on August 9, 2026, with responses due by August 20, 2026. The contract falls under NAICS code 336360 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 10 days after delivery order issuance. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure of technical information to foreign persons, including foreign nationals within the United States or overseas, requires prior authorization from the Department of State or Department of Commerce. Distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandated training on handling DOD export-controlled data, and have been formally approved by DLA. DFARS 252.225-7048 governs the management of this controlled information, and the primary point of contact for inquiries is Anna-Rachelle Betts, reachable via email or phone listed in the contract metadata.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-6216
The contract pertains to the procurement of two units of a box and accessories item identified by NSN 2540-01-734-9195 under solicitation SPE7L4-26-T-6216, with a required delivery date of August 6, 2026, and a 20-day delivery window from the order date. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951, and must be packaged in accordance with MIL-STD-129 labeling and RP001 packaging guidelines, with hazardous materials meeting TQ requirement IP025 and non-hazardous materials following FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must be commercially compliant, palletized per DLA standards, and clearly marked with the correct Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The shipment must be sent by the fastest traceable means—parcel post is prohibited—and must be addressed to the designated military facility in Imperial Beach, California, with the RDD 777 identifier. The contractor is Buyers Products Company DBA 9X737 with part number 1705160, and the contract is issued under a DoD unit of issue as defined by the official DLA unit conversion table. All documentation and reporting must include the designated government control codes and project identifiers for administrative tracking.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
LATCH, DOOR, VEHICULAR
Solicitation # SPE7L4-26-U-1073
The contract specifies the procurement of a vehicular door latch with NSN 2540-01-609-9677 and part number MIL-2-16924-23, under solicitation SPE7L4-26-U-1073, targeting a total small business set-aside with a NAICS code of 336390. The requirement is for 29 units at a unit price of $29.00, with a total estimated value of $841.00, and delivery must be completed within 80 days, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129 for marking and labeling, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA standards overriding ASTM where conflicts exist. Palletization and packaging must adhere to RP001 DLA Packaging Requirements for Procurement. The contract is issued by the Department of Defense’s LSO Combat Vehicles and Armament office under a federal solicitation posted on August 9, 2026, with responses due by August 24, 2026. The point of contact is Heather Kessler, and the unit of issue is each (EA), with the quantity per unit pack defined as one. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List, and the applicable revision is determined by the solicitation issue date. Delivery is to be made without government identification removed from non-accepted supplies, and the unit of issue and purchase unit are to be aligned with the official DLA unit of issue documentation. The contract is managed through DLA’s eProcurement systems and the DIBBS platform for solicitation participation.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336211
New
DIBBS
PLATE, SKIRTING, VEHICLE
Solicitation # SPE7L4-26-U-1068
The contract pertains to the procurement of 30 units of a plate, skirting, vehicle suspension with NSN 2510-01-421-4593 under solicitation SPE7L4-26-U-1068. Delivery is required within 89 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129 with the special marking code ZZ indicating an upward arrow, open this side, and mandatory mechanical handling. Technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and unspecified attributes are treated as major with corresponding verification levels or AQLs. The item is classified as a critical application item and is subject to CMMC Level 2 Self-Assessment requirements. Material color is green unless otherwise indicated. The supplier is LOC PERFORMANCE PRODUCTS LLC with part number 12365235, and the contract is a DLA Direct, CONUS procurement using the DoD unit of issue. All cybersecurity and packaging obligations are mandatory and enforceable.
Motor Vehicle Body Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Solicitation # SPE7L4-26-U-1078
The contract is for the procurement of 5,349 units of a RING, WIPER with NSN 5330-01-493-5202 under solicitation SPE7L4-26-U-1078, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Deliveries are required within 97 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, as stipulated for direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The product must be free of asbestos as defined by FED-STD-313 and palletization must meet DLA packaging standards. Sampling and inspection for conformance must follow MIL-STD-1916 or ASQ H1331 Table 1, or an approved zero-based sampling plan, with critical, major, and unspecified attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in the sample lot unless otherwise stated. The manufacturer may elect attribute or variable inspection under MIL-STD-1916, and MIL-STD-105 or ASQ Z1.4 may only be used to determine sample size, not acceptance criteria. Hazardous materials packaging and shipping must comply with IP025. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage. The supplier for this item is Greene Tweed & Co Inc, part number 87582. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and the contract is subject to standard DoD procurement procedures and unit of issue conversions.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
MIRROR HEAD, VEHICULAR
Solicitation # SPE7L4-26-U-1071
This contract is for the procurement of 96 vehicular mirror heads under solicitation SPE7L4-26-U-1071, with a unit price of $96.00 per item and a total value of $9,216. The delivery timeline is 80 days from the award date, with delivery terms set at FOB origin, meaning the supplier is responsible for the item until it leaves their facility. The quantity is fixed with no variance permitted—neither plus nor minus zero percent—and inspection and acceptance occur at the destination. All items must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, specifying packaging methods, materials, and unit container types, while marking must adhere to MIL-STD-129 with no special marking required. The item is identified by NSN 2540-01-706-8157 and part number 2638846, supplied by Polaris Sales Inc. The contract explicitly prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements but not exempting the product from meeting performance standards; any substitute chemicals must be pre-approved unless already authorized by the specification. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each (EA), and the contract is issued under a simplified acquisition process with a response deadline of August 24, 2026, and a posted date of August 9, 2026. The responsible agency is the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with Karryn Hoston as the primary point of contact.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332912
New
DIBBS
CONTROL, REEL
Solicitation # SPE7L4-26-T-6212
The contract pertains to the procurement of CONTROL, REEL with NSN 8130-01-460-6614 and part number 12364610-15, for a quantity of 8 units at a unit price of $8.00, totaling $64.00. Delivery is required within 165 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and the items must be packaged in compliance with ASTM D3951, subject to precedence of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The sole delivery address is the DLA Distribution facility at New Cumberland, PA, with transport governed by DLAD Proc Notes C19 and C20. The original required delivery date is April 25, 2027, with a need ship date of February 2, 2027. The solicitation number is SPE7L4-26-T-6212, issued by the Department of Defense under the NAICS code 332912, with Anna-Rachelles Betts as the primary point of contact. Proprietary data and insufficient competitive information are noted, and the contract references DLA’s authorized unit of issue and associated conversion standards.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CAPASSEMBLY
Solicitation # SPE7L4-26-U-1075
This contract, issued under solicitation SPE7L4-26-U-1075, is a total small business set-aside for the procurement of one item identified by NSN 2910-01-485-7711 and part number 75290-01, with an estimated quantity of 149 units at a unit price of $149.00, totaling $22,201. The contract mandates strict adherence to DLA Packaging Requirements for Procurement, including compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with all DLA Master List of Technical and Quality Requirements taking precedence. Delivery is required FOB origin within 74 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The unit of issue is each, and palletization must conform to DLA standards. The item is covered under DLA Direct, CONUS, and is subject to all applicable federal acquisition regulations. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and is managed by the Department of Defense’s LSO Combat Vehicles and Armament under NAICS code 336310, with primary point of contact Heather Kessler available for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-U-1072
The contract pertains to the procurement of a BRACKET, ANGLE with NSN 5340-01-481-8190 and part number 23-09130-007, under solicitation SPE7L4-26-U-1072, issued by the Department of Defense’s LSO Combat Vehicles and Armament office. The requirement is for 129 units, each priced at $129.00, totaling $16,641.00, with delivery expected within 116 days FOB origin and no tolerance for quantity variance. The item is covered under DLA Direct, CONUS, with inspection and acceptance points set at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, and adhere strictly to MIL-STD-129 for marking and labeling. If the material is non-hazardous, it must be commercially packaged per ASTM D3951, but if hazardous per FED-STD-313, packaging must follow TQ requirement IP025. All packaging and palletization is governed by RP001, DLA Packaging Requirements for Procurement. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 24, 2026, and was posted on August 9, 2026. Primary point of contact is Heather Kessler, reachable via email and phone as provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, BALL JOINT
Solicitation # SPE7L4-26-U-1080
The contract pertains to a Parts Kit, Ball Joint, identified by NSN 2530-01-668-5704 and part number 4364830, with a quantity of 12 kits delivered under solicitation SPE7L4-26-U-1080. Delivery is required within 75 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and conform to DLA packaging requirements, with marking in accordance with MIL-STD-129. The unit of issue is KT (kit), and all preservation and packaging methods must adhere to the specified military standards using designated materials and codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contract is issued by the Department of Defense under LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact. This is a direct DLA acquisition within the continental United States, and the solicitation response deadline is August 24, 2026.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details