Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Cryogenic Liquid Line Insulation Contractor

Active

Federal

Response Deadline09/24/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a Cryogenic Liquid Line Insulation Contractor to support prime contractors at the Naval Undersea Warfare Center Division facility in Keyport, Washington. The scope of work involves removing degraded insulation, cleaning liquid lines, and installing a specialized system consisting of three-inch thick urethane insulation with a Mylar vapor barrier and a white aluminum outer jacket, including all necessary mounting hardware. The final deliverable must be a validated insulation system that ensures zero frost or condensation. The project is designated as a total Small Business Set Aside under NAICS code 238220. To be eligible, contractors must possess CMMC Level 1 certification and be able to obtain necessary installation access to the NUWC facility. The response deadline for this opportunity is September 24, 2026.

General Info

Small business subcontract for cryogenic liquid line insulation at NUWC Keyport by September 2026.

Agency

Department Of Defense → Naval Undersea Warfare CenterView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Keyport, WA, 98345, USA

Set-Aside

SBA

Documents

This scope was carved out of N0025326Q7021.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

N2 Liquid Line Re-Insulation Services

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 08:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Undersea Warfare Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Undersea Warfare Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs cryogenic insulation systems for prime contractors on Naval Undersea Warfare Center (NUWC) Division, Keyport facility projects. Removes degraded insulation, cleans liquid lines, and installs 3-inch thick urethane insulation with a Mylar vapor barrier and white aluminum outer jacket. Provides and installs mounting hardware. Requires CMMC Level 1 certification and NUWC installation access. Delivers a validated insulation system with zero frost or condensation.

Similar Contracts

Same NAICS industry code

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 70CMSW26D00000004

Solicitation 70CMSW26D00000004 is a firm-fixed-price construction task order issued by U.S. Immigration and Customs Enforcement for the Port Isabel Detention Center in Los Fresnos, Texas. The project consists of two primary scopes of work: the replacement and upgrade of rooftop HVAC units for Alpha, Bravo, Charlie, and Delta dorms, and a SCADA system upgrade including the installation of two chemical feed pumps. The HVAC systems must be high quality, durable, and coastal weather resistant, while the SCADA system must comply with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. The contract is set aside for 8(a) Multiple Award Construction Contract holders and will be awarded to the offeror proposing the lowest total evaluated price. Key requirements include a one-year warranty for installation and craftsmanship, the provision of performance and payment bonds, and adherence to Davis-Bacon wage determinations for Cameron County. Due to the secure nature of the facility, all personnel must undergo rigorous employment screening, including criminal history and citizenship checks, and pass the DHS E-Verify program. The contractor must provide a qualified Project Manager with at least five years of federal contracting experience and submit a comprehensive quality control and safety plan for government approval.

Bristol Alliance of Companies

POSTED

about 10 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at the Clearfield Job Corps Center, specifically for Building E8 Welding in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, provision of all necessary wiring, conduit, breakers, and rigging services, and ensuring the system is fully operational post-installation. Key deliverables include startup and testing documentation, as well as onsite training for maintenance personnel. All work must comply with OSHA requirements, federal, state, and local codes, and site safety procedures. This is a small business set-aside opportunity under NAICS code 238220. Bids will be evaluated based on overall best value, and a physical site visit and signature on the attendance roster are mandatory for consideration. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee. The deadline for submission via email to the designated points of contact is September 19, 2026, at 3:00 PM MST. The contract requires adherence to Davis-Bacon prevailing wage rates for Davis County, Utah, and incorporates various FAR clauses, including those regarding the Buy American Act and combating trafficking in persons. Awarded contractors must provide a 12-digit Unique Entity ID (UEI) and a 9-digit Tax ID. Payment will be processed via pay applications using AIA G702 and G703 forms based on a submitted Schedule of Values. Performance and payment bonds must be submitted within five business days of the Intent to Award letter.

Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

in about 7 hours

Joliet JCC Dorm Bathroom Renovations

Solicitation # joliet-jcc-dorm-bathroom-renovations

Management & Training Corporation (MTC), operator of the Joliet Job Corps Center for the US Department of Labor, is seeking a subcontractor for the renovation of thirty-two female dorm room bathrooms in Joliet, Illinois. This fixed-price, single lump sum contract, with an estimated value between $100,000 and $250,000, falls under NAICS 238220. The scope of work includes providing all labor, materials, and equipment to rod and clear sanitary drain lines and replace existing shower assemblies with Delta Hydrof ProCrylic units or comparable alternatives. The project must be completed within 60 consecutive business days following a written Notice to Proceed. Bids are due by September 23, 2026, and must be submitted via email. To be considered, bidders must have completed a mandatory site visit and provided a detailed cost breakout on company letterhead. Required documentation includes a bid bond of 20% for bids over $25,000, a completed MTC Supplier Packet, and a signed SF1413 form. Award decisions will be based on overall best value. The contractor must adhere to strict regulatory and administrative requirements, including paying prevailing wages per Executive Order 13658 and submitting weekly certified payroll reports. Insurance minimums include $1 million per occurrence for general liability, $1 million for auto insurance, and $500,000 for workers compensation. Additionally, performance and payment bonds from a surety with at least an A- rating are required for awards of $25,000 or more. Final payment is contingent upon the submission of two sets of operation and maintenance manuals and the successful completion of a final inspection.

Joliet Job Corps

POSTED

about 10 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project, identified as CBP7664, requires the contractor to provide all labor, materials, equipment, and supervision to restore full cooling capacity and operational efficiency. The scope of work is divided into four phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor, and system testing and commissioning. The awarded contractor must complete all work within 30 consecutive business days following the written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. Interested bidders must conduct a mandatory site visit and sign an attendance roster before submitting a lump sum bid and detailed cost breakout. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent is required, as well as performance and payment bonds from an A-rated surety company. The contract is subject to various federal regulations, including the Davis-Bacon Act for prevailing wage compliance in Washoe County, EPA Section 608 for refrigerant recovery, and FAR reporting requirements for first-tier subcontractors if the award exceeds 40,000 dollars. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB.

Sierra Nevada Job Corps Center

POSTED

about 10 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work includes the replacement of the chiller, four AC units, and chilled-water piping, along with all associated electrical systems. Key technical requirements include the modification of HVAC circuits and Panel P1, as well as the provision of temporary and redundant cooling systems to maintain operations throughout the construction period. The project concludes with system startup, testing, commissioning, FAA training, and the completion of punch-list items. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is categorized under NAICS code 238220. It is designated as a set-aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. The proposed start date for the work is April 15, 2027. Primary coordination for this effort is managed by Masanori Akers of PTSI Managed Services Inc. on behalf of the FAA.

PTSI Managed Services Inc.

POSTED

about 10 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 10 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a failing 10-ton pad-mounted gas-fired packaged HVAC unit at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within Building 1091. The contractor must install a new 12.5 SEER packaged unit utilizing non-R22 refrigerants, such as R-410A or R-454B, while reusing existing ductwork, electrical disconnects, and thermostat wiring. Key deliverables include providing a sequenced construction schedule within 10 days of the Notice to Proceed and ensuring the old unit and labeled recovered refrigerant are left at the maintenance building for parts. The project requires a one-year guarantee of workmanship and manufacturer product warranties. The solicitation is a single lump sum contract awarded based on best value, evaluating price, quality, past performance, and schedule. Mandatory requirements for bidders include attending the site visit on September 23, 2026, maintaining an active SAM.gov registration with a Unique Entity ID, and holding a valid Indiana Contractor's License. Proposals are due by October 5, 2026, and must include a detailed cost breakdown, insurance certificates, and certification of compliance with Davis-Bacon Act wage rates. All work must adhere to EPA, OSHA, and state and local building codes. Payment terms are Net 30, and the center is tax-exempt.

Adams & Associates, Inc.

POSTED

about 10 hours ago

DEADLINE

Inland Empire HVAC Tile & Landscape Trade

Solicitation # inland-empire-hvac-tile-landscape-trade

Inland Empire Job Corps

POSTED

about 10 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc. is soliciting a single lump sum subcontract for the replacement of HVAC systems at the Atterbury Job Corps Center ABL Dormitory in Edinburgh, Indiana. The project requires replacing eight vertical up-flow gas-fired furnaces with DX-coils and matched air-cooled condensing units, specifically replacing R-22 Bryant units with new 12.5 SEER packaged units using non-R22 refrigerants such as R-410A or R-454B. The scope includes reusing existing electrical disconnects, ductwork, and thermostat wiring, while ensuring all recovered refrigerant is labeled and left on-site. All work must comply with EPA, OSHA, and Indiana state and local building codes. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with proposals due by October 5, 2026. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, a 90-day bid guarantee, and certification of compliance with Davis Bacon Act wage rates. Award will be based on best value, evaluated across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor is responsible for all material storage and must provide proof of automobile liability and workers' compensation insurance, naming Adams and Associates, Inc. as an additional insured. Final payment is subject to Net 30 terms and requires the submission of a completed SF 1413, certified payroll records, and a release of liens from all subcontractors. Workmanship is guaranteed for one year from the date of substantial completion.

Adams & Associates, Inc.

POSTED

about 10 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

This subcontracting opportunity, managed by Adams and Associates, Inc. for the Atterbury Job Corps Center in Indiana, involves the replacement of aging R-22 HVAC systems in the ABL Dormitory. The scope of work requires replacing existing Bryant air-cooled condensing units and coils serving common areas and dormitory Wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants, such as R-410A or R-454B. The contractor will reuse existing electrical disconnects, ductwork, and thermostat wiring, and must ensure all recovered refrigerant is labeled and left on-site. All work must comply with EPA and OSHA regulations, as well as state and local building codes, with Indiana regulations prevailing if more stringent. The project is a single lump sum contract, with award based on best value considering price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include attending a site visit on September 23, 2026, maintaining an active SAM.gov registration with a Unique Entity ID, and holding a valid Indiana Contractor's License. Proposals are due by October 5, 2026, and must include a detailed cost breakdown, a timeline for completion, and certification of compliance with Davis-Bacon Act wage rates. Final payment is subject to net 30 terms and is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of all subcontractor and material supplier liens.

Adams & Associates, Inc.

POSTED

about 10 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. Key deliverables include the initial site survey, obtaining necessary permits, final design development, construction, inspections, punch-list completion, and the delivery of as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is proposed to start on February 1, 2027. This opportunity is designated as a presolicitation and is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. The project falls under NAICS code 238220 and is managed by PTSI Managed Services Inc.

PTSI Managed Services Inc.

POSTED

about 10 hours ago

DEADLINE

WOJC - Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Education and Training Resources is seeking quotes for a subcontracting opportunity to repair a compromised buried domestic hot water pipe at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves excavating a trench approximately 15 linear feet long to a depth of 8 feet, removing and repairing up to 10 linear feet of piping with a diameter up to 4 inches, and installing insulation on the new piping. The selected contractor must provide all labor, materials, and equipment, ensuring all work adheres to industry standards, applicable construction codes, and OSHA regulations. A one-year equipment and workmanship warranty is required, and project close-out necessitates a signed punch list. Bids are due by October 2, 2026, at 4:00 PM, with a site walkthrough scheduled for September 23, 2026. To be eligible for award, bidders must submit a completed bid sheet with a detailed cost breakdown, a proposed service schedule, and proof of required Massachusetts licensing and credentials. Administrative requirements include an active SAM.gov registration with a Unique Entity ID, a W-9, a Vendor Acknowledgement Form, and applicable certificates of insurance. The contract mandates compliance with the Davis-Bacon Act and the Service Contract Act, requiring the submission of weekly certified payroll reports. Award selection is at the sole discretion of Education and Training Resources and is not automatically granted to the lowest bidder.

Westover Job Corps Center

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

DMISA Ring Test and Inspection ServicesThis subcontract for the Naval Undersea Warfare Center involves the technical testing and inspection of refurbished DMISA rings for prime contractors on NAVSEA projects. The selected provider will be responsible for identifying items by NSN and serial number, executing specific test parameters, and verifying performance requirements through the use of environmental chambers and precision measurement equipment. All results must be formally signed and authenticated, culminating in the delivery of a comprehensive Test/Inspection Report as specified in CDRL A001. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of data transmission requirements, the contractor must maintain CMMC Level 2 certification. The solicitation was posted on September 18, 2026, with a response deadline of October 19, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Specialized Magnet Supply for DMISA RingsThis subcontract through the Naval Undersea Warfare Center involves the supply of high-precision magnets used in NAVSEA torque motor magnetic field ring assemblies. The contractor is responsible for manufacturing magnets that meet strict technical specifications for both Azimuth and Elevation rings using high-grade materials. All deliverables must be tracked by lot and serial number to ensure quality and traceability. The contract requires full certification of Trade Agreements Act compliance, ensuring materials originate from the United States or a designated country. Performance for this requirement is based in Keyport, Washington, under NAICS code 327390. The response deadline for this opportunity is October 19, 2026.

Other Concrete Product Manufacturing

POSTED

DEADLINE

in about 1 month

DMISA Ring Refurbishment and Magnet InstallationThis subcontract for the Naval Undersea Warfare Center involves the refurbishment of torque motor magnetic field ring assemblies for NAVSEA projects. The scope of work includes removing existing magnets from government-furnished rings, cleaning and preparing surfaces, and installing new magnets into various plated steel and stainless steel azimuth and elevation ring configurations. Due to the precision required for magnet removal and installation, the use of specialized tools is mandatory. The project is based in Keyport, Washington, and requires strict adherence to CMMC Level 2 and NISPOM standards. The final deliverable consists of refurbished and repopulated DMISA ring assemblies. Interested parties must respond by October 19, 2026, under NAICS code 332710.

POSTED

DEADLINE

in about 1 month

Bldg. 1051 Replace Main Dry Valves

Solicitation # N0025326Q0013

The Naval Undersea Warfare Center (NUWC) Division, Keyport is soliciting a firm fixed-price contract for facility improvements at Building 1051 in Keyport, Washington. The scope of work comprises three primary elements: the repair and replacement of fire sprinkler riser components, including various wet and dry pipe alarm valves and the installation of a nitrogen gas generation system; the replacement of a low-pressure air compressor and breathing air purifier system; and the installation of nine explosion-proof LED lighting fixtures above vertical waste storage tanks. This requirement is 100% set aside for small business concerns under NAICS code 238290, with an estimated magnitude between $250,000 and $500,000 and a performance period of 180 calendar days from the date of award. The government will utilize a Lowest Price Technically Acceptable (LPTA) evaluation process, assessing offerors on business experience, understanding of the requirement, safety records via DART and TCR rates, and past performance. Mandatory requirements include current SAM.gov registration, the provision of 100% performance and payment bonds within 10 days of award, and compliance with the Davis-Bacon Act wage determinations for Kitsap County. Contractors must adhere to strict safety and environmental standards, including EM-385-1-1 and OPSEC guidelines for protecting critical information. All proposals must be submitted electronically, and the successful contractor will be required to provide comprehensive O&M manuals and training upon completion of the project.

Other Building Equipment Contractors

POSTED

DEADLINE

Refurbishment of Torque Motor Magnetic Field Ring Assemblies

Solicitation # N0025326R7006

Solicitation N0025326R7006, issued by the Naval Undersea Warfare Center Division Keyport, is an Indefinite-Delivery Indefinite-Quantity procurement for the refurbishment and repopulation of Torque Motor Magnetic Field Ring Assemblies (DMISA rings). The scope of work involves the depopulation of existing magnets and the installation of new magnets for four variations of rings: plated steel azimuth, stainless steel azimuth, plated steel elevation, and stainless steel elevation. The contractor is responsible for grinding items to meet final dimensions and performing all required tests and inspections in accordance with NAVSEA Drawings 7447999 Rev I and 7448000 Rev F. The government has established a maximum order quantity of 2,540 units, with specific delivery requirements of 180 calendar days after receipt of government furnished property. The contract will be awarded to a single offeror using the Lowest Price Technically Acceptable (LPTA) source selection process. To be considered, offerors must be rated acceptable in technical capability, quality management systems (ISO 9001:2015 or equivalent), risk management, and past performance. Key deliverables include a Test and Inspection Data Sheet (CDRL A001) with every delivery and adherence to strict packaging and marking standards, including magnetic content labeling and MIL-STD-130 unique identification. Access to controlled technical drawings requires validated JCP and CMMC certifications. Invoicing is managed through the Wide Area WorkFlow (WAWF) system, and inspection and acceptance are performed by the government at the destination in Keyport, Washington.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 1 month

Building 514 Crane Rail Cross Bracing Installation

Solicitation # N0025326Q0008

The Naval Undersea Warfare Center Division Keyport is soliciting quotes under RFQ N0025326Q0008 for the installation of crane rail cross bracing in Building 514. This firm-fixed-price construction project is a 100% small business set-aside under NAICS code 333923. The scope of work requires the contractor to relocate existing electrical and high-pressure air lines, weld new plate stiffeners and gussets, and install bolted cross bracing. All work must adhere to the Building 514 Crane Support Study and meet the alignment criteria of the Crane Manufacturers Association of America (CMAA) No. 74, with surveys performed by a registered design professional both before and after construction. The government will evaluate proposals on an acceptable/unacceptable basis, focusing on technical capability, past performance, and safety records, specifically reviewing DART and TCR rates. Offerors must demonstrate at least three years of business experience in commercial or industrial applications and provide certifications for a Site Safety and Health Officer. Bid bonds are required for proposals of 150,000 dollars or more. Award is based on the Lowest Price Technically Acceptable (LPTA) source selection. All submissions must be digital, sent via email, and include completed representations and certifications in the System for Award Management. Performance is subject to the Davis-Bacon Act and EM-385-1-1 safety standards, with invoicing processed through the Wide Area Workflow system.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Hazardous/Industrial Waste Disposal ContractorThis subcontract opportunity is for a Hazardous and Industrial Waste Disposal Contractor to support prime contractors at the Naval Undersea Warfare Center Division facility in Keyport, Washington. The selected contractor will be responsible for the removal, collection, and legal disposal of degraded insulation and industrial waste from Building 98, ensuring all activities comply with federal, state, and local environmental regulations. Key deliverables include the provision of disposal manifests and certificates of destruction. The project is designated as a total Small Business Set Aside under NAICS code 562111. Qualified bidders must possess valid waste hauling and disposal permits to be eligible. The solicitation was posted on September 17, 2026, with a response deadline of September 24, 2026.

Solid Waste Collection

POSTED

DEADLINE

Specialized Cryogenic Insulation SupplierThis subcontract, designated as a total Small Business Set Aside, involves the supply of specialized cryogenic insulation materials for projects at the Naval Undersea Warfare Center Division Keyport facility. The supplier is responsible for providing three-inch thick urethane insulation, Mylar vapor barriers, white aluminum outer jackets, and all necessary mounting hardware. All materials must adhere to strict performance standards to effectively prevent frost and condensation on liquid nitrogen systems. The contractor is required to deliver all specified materials and hardware directly to the site or the prime contractor. This opportunity falls under NAICS code 326199 and is managed under the Department of Defense. The response deadline for this requirement is September 24, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

N2 Liquid Line Re-Insulation Services

Solicitation # N0025326Q7021

The Naval Undersea Warfare Center Division Keyport is soliciting a firm fixed price service requirement under RFQ N0025326Q7021 for the re-insulation of two liquid lines connected to a 3,000-gallon liquid nitrogen tank located at building 98 in Keyport, Washington. The project involves the removal of degraded insulation and the installation of new 3-inch thick urethane insulation featuring a Mylar vapor barrier and a white aluminum outer jacket. This requirement is a 100 percent small business set-aside under NAICS code 238290. The performance period is approximately 30 days from award, and the final acceptance is contingent upon a joint inspection demonstrating zero condensation, zero frost formation, and complete structural integrity of the cladding. Offerors must submit their quotes by September 24, 2026, via email to the designated contract specialist. To be considered technically acceptable, bidders must provide a CMMC Unique Identifier and maintain at least CMMC Level 1 (Self) certification. Award will be based on the best value to the government, evaluating both price and past performance regarding quality and delivery. Key deliverables include a Pre-Work Inspection and Baseline Verification Report to be submitted before on-site work begins, and a Damage Assessment and Corrective Action Plan if accidental damage occurs. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system.

Other Building Equipment Contractors

POSTED

DEADLINE

Industrial Flooring Materials Supplier

Floor Covering Stores

POSTED

DEADLINE

Compressed Air Piping Installation

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Epoxy Flooring Installation

Painting and Wall Covering Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS