Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Cryogenic Vessel and Vacuum System Specialist

Active

Federal

Response Deadline12/19/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for a Cryogenic Vessel and Vacuum System Specialist involves performing semi-annual inspections and routine maintenance on cryogenic tanks and lines for prime contractors supporting the US Navy Fleet Readiness Center East at MCAS Cherry Point, North Carolina. The scope of work includes verifying annulus pressure to 0.05 torr or lower using high-vacuum equipment, calibrating or replacing relief valves, and monitoring partial pressures. The specialist is responsible for delivering completed inspection and maintenance reports, providing signed malfunction reports, and offering written repair recommendations. This opportunity is associated with NAICS code 811310 and is managed under the Department of Defense for the Fleet Readiness Center.

General Info

Semi-annual cryogenic vessel inspections and maintenance for US Navy FRC East, MCAS Cherry Point.

Agency

Department Of Defense → Fleet Readiness Center

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Cherry Point, NC, 28533, USA

Set-Aside

NONE

Documents

This scope was carved out of N68520-26-Q-1007.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Inspection, maintenance and repair of cryogenic storage tanks.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedDec 15

subcontract

Response DeadlineDec 19

Submission deadline

Response Deadline

12/19/2026, 09:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Fleet Readiness Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Fleet Readiness Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs semi-annual inspection and routine maintenance of cryogenic tanks and lines for prime contractors on US Navy Fleet Readiness Center East projects at MCAS Cherry Point, NC. Verifies annulus pressure to 0.05 torr or lower using high-vacuum measurement equipment, calibrates or replaces relief valves, and monitors partial pressures. Provides signed malfunction reports and written repair recommendations. Delivers completed inspection and maintenance reports.

Similar Contracts

Same NAICS industry code

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed by the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their bids through the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

about 4 hours ago

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts required to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling the tractor, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, and proof of insurance to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination No. 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding equal opportunity, combating trafficking in persons, and restrictions on foreign purchases.

Earle C. Clements Job Corps Center

POSTED

about 4 hours ago

DEADLINE

Commercial Kitchen Equipment Repair Services

Arizona Department of Corrections

POSTED

about 11 hours ago

DEADLINE

in about 2 months

SMDOT Elevator Maintenance

Solicitation # 12701633

The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators, including two passenger elevators and one freight elevator, located at 1620 6th Street. The scope of work requires monthly systematic examination, lubrication, and repair of components such as traction machines, hydraulic pump units, and controllers, in compliance with California Administrative Code Title 8, Section 3000(h). The contractor must provide a maintenance supervisor, maintain a local warehouse of OEM replacement parts, and ensure a one-hour emergency response time during normal business hours. Deliverables include monthly testing of emergency recall and override operations, with results recorded on check-off sheets and maintained in on-site logs. Bids must be submitted electronically via the OpenGov portal by November 9, 2026. Qualified bidders must possess a valid C-11 California contractor's license and provide a current DIR registration. The contract award is based on a best-value determination rather than the lowest price, with evaluation criteria weighted across experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City reserves the option to extend the agreement for four additional one-year renewal periods. Required documentation for submission includes a Levine Act Disclosure, experience statement, and non-collusion declaration. Depending on the award amount, successful bidders may be required to provide a payment bond for contracts exceeding $25,000, an Oaks Initiative Disclosure for annual awards over $25,000, and a Living Wage Certification for contracts exceeding $54,200. Additionally, the contractor must maintain comprehensive insurance naming the City of Santa Monica as an additional insured and comply with Title II of the Americans with Disabilities Act.

D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 11 hours ago

DEADLINE

in about 1 month

CNG Fueling Station Maintenance and Repair Services

Solicitation # 2026-RFP-0441

The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities: one for the Fleet Services Division and one for the Department of Airports located at 6730 Aviation Drive. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance on slow fill and fast fill dispensing systems, as well as major services at 4,000 and 8,000 hour benchmarks. Service requirements include 24/7 availability, with on-site response times of 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term, with the County reserving the right to extend for up to four additional one-year terms upon mutual agreement. Award selection is based on a points-based scoring method considering factors other than price alone, with a two-percent price preference available for State Certified Micro-Business enterprises. Proposers must provide a Public Works and Prevailing Wage Contractor Registration number and certify compliance with employment and wage reporting requirements. Proposals must be submitted electronically by October 30, 2026. Payment will be processed via the ePayables card program or hardcopy checks following the inspection and acceptance of services.

DGS: CAPSD - Procurement

POSTED

about 11 hours ago

DEADLINE

Vehicle Repair - Unit 2610 - Fleet

Solicitation # 321

Jefferson Parish Government is soliciting bids for the repair of a 2014 John Deere Tractor for its Department of Fleet Management. The scope of work includes diagnosing why the equipment fails to restart after running, replacing a non-operational fuel filter system, and draining, flushing, and refilling the fuel tank to remove debris contamination. The contractor is responsible for providing all necessary labor, materials, equipment, and transportation. The equipment is currently located at Sunshine Equipment in Covington, Louisiana. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement for the award is strict adherence to insurance standards per Jefferson Parish Resolution No. 136353 or No. 141125. Specifically, the contractor must maintain Garage Keeper’s Insurance of 500,000 dollars per occurrence, along with Commercial General Liability, Business Automobile Liability, and Worker’s Compensation coverage. The apparent low bidder must provide final insurance certificates within ten calendar days of the bid opening or face rejection. All costs, including incidentals, must be included in the total proposed bid amount.

Jefferson Parish Government

POSTED

about 12 hours ago

DEADLINE

ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING

Solicitation # BPM059230

The Maryland Transit Administration is soliciting bids for a firm fixed price contract to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts primarily located in Baltimore City. The scope of work includes full maintenance and repairs to ensure equipment operates at original contract speeds and remains in safe, first-class condition. Key deliverables include a minimum of four on-site team hours per escalator monthly for preventative maintenance, semi-annual and annual deep cleaning of units, and strict adherence to ASME A17.1 and A17.2 safety codes. The contract features a five-year base period with no options and requires the contractor to provide certified mechanics, maintain emergency service capabilities, and adhere to Maryland Living Wage requirements. Award will be made by lot to the responsible bidder offering the most favorable price. The solicitation establishes a 17 percent Minority Business Enterprise (MBE) participation goal and a 1 percent Veteran-Owned Small Business Enterprise (VSBE) goal. Required submissions include a Project Execution Plan, performance bonds, and various certifications regarding conflict of interest and non-disclosure. Invoicing is handled via email to the Contract Monitor and Accounts Payable, with a specific allowance of 600,000 dollars provided for parts, materials, and sub-work. All work must comply with federal, state, and local laws, including ADA requirements for intercom systems and strict regulations regarding the handling and disposal of PCBs.

Maryland Transit Administration

POSTED

about 13 hours ago

DEADLINE

Industrial Scale Installation and Certification Services

Florida Department of Transportation

POSTED

about 14 hours ago

DEADLINE

IFB 26C091005 - Hangar Door Hydraulic System Upgrade Services - CHP Academy Special Weapons and Tactics (SWAT)

Solicitation # 26C091005

The Department of the California Highway Patrol (CHP) is soliciting bids for Invitation for Bids (IFB) 26C091005 to perform a complete hydraulic system upgrade for two hangar doors at the CHP Academy SWAT facility in West Sacramento, California. The scope of work requires the contractor to provide all labor, materials, and equipment, including the installation of hydraulic power units, heavy-duty cylinders, rebuild kits, high-pressure hoses, and climate-appropriate fluid. The anticipated period of performance is from January 1, 2027, to June 30, 2027. A mandatory site walk-through was scheduled for November 9, 2026, and the final response deadline is November 23, 2026. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement is a minimum of 5% Disabled Veteran Business Enterprise (DVBE) participation, though incentives are available for higher participation levels. Bidders must comply with California prevailing wage laws, the Americans with Disabilities Act, and various safety and building codes. Depending on the final contract value, performance and payment bonds may be required for amounts exceeding 10,000 and 25,000 dollars, respectively. Submission requires a physical bid package containing specific certifications, including the Bidder Declaration, Non-Collusion Affidavit, and California Civil Rights Certification.

Department of the California Highway Patrol

POSTED

about 16 hours ago

DEADLINE

Commercial Dishwashing & Steam Equipment ServicesThis subcontract opportunity with the Georgia Institute of Technology involves providing specialized repair and preventative maintenance for commercial dishwashers and steam-based equipment within dining facility projects. The scope of work includes critical technical tasks such as descaling boilers, repairing pumps, cleaning spray arms, and replacing steam valves to ensure all systems remain fully operational. Qualified candidates must hold a valid plumbing or mechanical license to perform these services. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 811310.

Georgia Institute of Technology

POSTED

about 17 hours ago

DEADLINE

Commercial Hot-Side Equipment Repair & MaintenanceThis subcontract for Commercial Hot-Side Equipment Repair and Maintenance involves providing repair and preventative maintenance services for commercial cooking and heating equipment at Georgia Institute of Technology dining facilities. The scope of work includes burner cleaning, pilot light repair, calibration of ovens and broilers, and the replacement of heating elements. The primary objective is to ensure all cooking equipment is safe and operational, with the delivery of completed preventative maintenance checklists. Qualified contractors must hold a mechanical license or a gas fitter certification to perform these services. The solicitation was posted on October 28, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 811310 and is intended for those working as subcontractors for prime contractors on these specific institutional projects.

Georgia Institute of Technology

POSTED

about 17 hours ago

DEADLINE

Kitchen Equipment Repair & PM Services for GT Dining

Solicitation # PE-50300-RFQ-2027-000000353

The Georgia Institute of Technology is soliciting proposals under solicitation number PE-50300-RFQ-2027-000000353 for kitchen equipment repair and preventative maintenance services. The scope of work involves providing these essential maintenance and repair services for the Georgia Tech campus located in Atlanta, Georgia. This solicitation was posted on October 28, 2026, and requires responses to be submitted by November 13, 2026, at 5:00 PM UTC. Interested parties should coordinate with the primary point of contact, Anaya Carter-Merritt, and submit their proposals through the designated agency portal.

Georgia Institute of Technology

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Fleet Readiness Center

Same awarding agency

Hazardous Materials Handling (LOX, Glycol, Batteries)This subcontract involves the storage, handling, and servicing of hazardous aircraft fluids to support prime contractors on Navy FRCSE aircraft projects in Jacksonville. The scope of work specifically includes the management of Liquid Oxygen, Ethylene Glycol servicing, and battery storage and maintenance. To ensure operational safety and compliance, the contractor must provide specialized battery charging and LOX storage facilities while adhering strictly to OPNAVINST 8023.24D standards. Managed by the Department of Defense under the Fleet Readiness Center, this requirement falls under NAICS code 488119. The primary objective is the safe replenishment and servicing of critical hazardous materials. Interested parties should note the response deadline of November 12, 2026.

Other Airport Operations

POSTED

about 22 hours ago

DEADLINE

Specialized Aircraft Consumables & Materials SupplyThis subcontract opportunity with the Department of Defense Fleet Readiness Center involves the supply of specialized aircraft consumables and materials for Navy FRCSE aircraft projects in Jacksonville. The selected provider will be responsible for delivering certified aerospace-grade chemicals and materials used for cleaning, preservation, and corrosion control, ensuring all supplies strictly adhere to NAVAIR 01-1A-509-4 and NAVAIR 15-01-500 standards as well as approved consumable lists. To qualify for this contract, the supplier must possess a material storage capacity of at least 20,000 square feet. Interested parties must submit their responses by November 12, 2026, under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Avionics & Communication Systems MaintenanceThis subcontract for Avionics and Communication Systems Maintenance involves performing critical maintenance and testing of VLF communication systems for prime contractors supporting Navy FRCSE aircraft projects in Jacksonville. The scope of work includes maintaining dual trailing wire antennas and both secure and non-secure voice and data systems, specifically requiring low and high power turn-up testing. To successfully execute these tasks, the contractor must utilize specialized avionics test equipment and have access to a dedicated low/high power turn-up area to deliver fully operational communication suites. Compliance requirements for this engagement are stringent, necessitating a Secret security clearance and CMMC Level 2 certification. The project falls under NAICS code 334220 and is managed through the Department of Defense for the Fleet Readiness Center. Interested parties should note the response deadline of November 12, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Depot-Level (D-Level) Structural & Airframe MaintenanceThis subcontract for Depot-Level Structural and Airframe Maintenance involves performing heavy structural inspections and airframe repairs for prime contractors supporting Navy FRCSE aircraft projects. The scope of work includes conducting structural evaluations and repairs in accordance with the Planned Maintenance Interval Depot Level Maintenance Specification to ensure certified airframe structural integrity. Performance will take place in Jacksonville and requires the use of enclosed hangar bays and specialized aircraft tooling. Due to the sensitive nature of the work, the contractor must possess a DCSA-verified SECRET facility clearance and employ a workforce consisting of 100 percent U.S. citizens. This opportunity is categorized under NAICS code 336411 and is managed by the Department of Defense Fleet Readiness Center. Interested parties must respond by November 12, 2026.

Aircraft Manufacturing

POSTED

about 22 hours ago

DEADLINE

Aircraft Strip, Prime, and Painting ServicesThis subcontract for Aircraft Strip, Prime, and Painting Services involves performing exterior coating removal and application for prime contractors on Navy FRCSE aircraft projects in Jacksonville. The scope of work includes stripping existing paint, preparing surfaces, and applying primer and final paint according to Navy aircraft specifications to deliver fully finished E-6B aircraft. Eligible contractors must possess enclosed aircraft paint booths capable of housing E-6B aircraft and maintain AS9100 or ISO 9001:2015 certification. Additionally, the provider must meet CMMC Level 2 requirements and employ a staff consisting of 100% U.S. citizens. Responses for this Department of Defense opportunity are due by November 12, 2026.

Guided Missile and Space Vehicle Manufacturing

POSTED

about 22 hours ago

DEADLINE

Planned Maintenance Interval (PMI) for E-6B

Solicitation # N68520-26-RFPREQ-HJ00000-0432

The Fleet Readiness Center Southeast is conducting market research via a sources sought notice to identify capable firms for a Planned Maintenance Interval contract supporting the United States Navy E-6B Mercury aircraft fleet. The anticipated period of performance is from June 2027 through May 2031, and the government intends to utilize a C-Type, Firm-Fixed Price contract. The scope of work involves Depot and Organizational level maintenance, including structural inspections and strip, prime, and painting services. Due to the strategic importance of the E-6B platform, the work is executed under a DX-A1 national defense priority rating and requires the contractor to maintain the capacity to service up to two aircraft concurrently using staggered induction schedules. Eligible respondents must operate under NAICS code 336411 and provide a fully operational facility located within 25 miles of NAS Jacksonville. Critical facility requirements include enclosed hangar bays for two aircraft, specific paint booths, significant logistics and staging space, and a DCSA-verified SECRET facility clearance. Technical requirements include a workforce of certified mechanics and specialists, experience with the Naval Aviation Maintenance Program, and adherence to AS9100 or ISO 9001:2015 quality standards. Additionally, contractors must meet CMMC Level 2 Self-Assessment requirements and provide 100 percent sole U.S. citizen personnel for touch-labor and supervisory roles. Responses are due by November 12, 2026.

Aircraft Manufacturing

POSTED

about 22 hours ago

DEADLINE

OEM Parts Supply for Magnaflux and Gould Bass EquipmentThis subcontract opportunity is for the supply of genuine original equipment manufacturer parts to support prime contractors on Fleet Readiness Center East projects. The scope of work involves sourcing and delivering OEM components, specifically relays and contact pads, for Magnaflux and Gould Bass magnetic particle and demagnetization systems. To ensure the authenticity of the parts, the provider must maintain status as an authorized distributor or service center. The contract is designated as a total small business set-aside under NAICS code 423840, with performance taking place in Cherry Point. Interested parties must submit their responses by November 4, 2026, to provide the specified equipment to the Department of Defense agency.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Magnaflux and Gould Bass Equipment Maintenance and CalibrationThis small business set-aside subcontract involves providing semi-annual preventative maintenance and calibration for magnetic particle machines and demagnetizers supporting prime contractors on Fleet Readiness Center East projects in Cherry Point. The scope of work includes performing functional checks on power supplies, meters, tap switches, and wiring, as well as testing pad accuracy and calibrating equipment. The selected provider must deliver comprehensive service reports and documentation for all completed maintenance visits. To qualify for this engagement, the contractor must hold ISO 17025 accreditation and maintain status as an Authorized Service Center for both Magnaflux and Gould Bass. This requirement ensures that all technical services meet strict industry and agency standards for precision and reliability within the Department of Defense framework.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Magnaflux Demagnetizer Semi Annual Preventative Maintenance (Re-Bid)

Solicitation # N6852027Q1000

Solicitation N6852027Q1000 is a firm fixed price, total small business set-aside contract issued by the Fleet Readiness Center for the semi-annual preventative maintenance of Magnaflux demagnetizers and magnetic particle equipment. The work is to be performed at the Fleet Readiness Center East in Cherry Point, North Carolina, with maintenance visits typically scheduled in October and April during normal business hours. The contractor is responsible for performing two preventative maintenance visits per piece of equipment and executing all necessary repairs detected during these visits, including the replacement of relays and correction of voltage or field strength readings. To be eligible, the contractor must be an Authorized Service Center for Magnaflux and Gould Bass, capable of providing OEM parts, and hold ISO 17025 accreditation for calibrating magnetic particle machines. Award will be based on the most advantageous offer considering price, technical capability, and experience. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding small business subcontracting limits, security prohibitions, and the use of ozone-depleting substances.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Software License Compliance & Usage ReportingThe contract requires ongoing monitoring and reporting of Solid Edge software license usage to ensure strict adherence to licensing agreements and Department of Defense IT compliance standards. Responsibilities include tracking active and inactive seats, managing license allocation across teams and projects, and maintaining accurate records to support regular audits. The service provider must generate comprehensive, audit-ready documentation that demonstrates compliance, identifies potential breaches or overuse, and recommends optimizations for efficient license utilization. Performance is tied to a specific location with a zip code of 28532, and the work falls under NAICS code 541611, indicating it is a professional, scientific, and technical service focused on administrative management and compliance. The contract is structured as a subcontract under the Fleet Readiness Center, a component of the Department of Defense, with an expected start date of July 1, 2026. The nature of the work demands precision, accountability, and alignment with federal IT governance protocols to ensure continuous operational readiness and license integrity within military support environments.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Onsite Engineering Software Training & User SupportThe contract entails providing on-site engineering software training and Tier 1–2 user support for Solid Edge at Fleet Readiness Center East, located in Elizabeth City, North Carolina, with a ZIP code of 28532. The work includes comprehensive onboarding of users, optimization of engineering workflows, and responsive troubleshooting to ensure seamless integration and efficient use of Solid Edge software within the facility's operations. Support services are designed to enhance user proficiency and system reliability, addressing both foundational and intermediate technical challenges directly at the point of use. This subcontract falls under the NAICS code 611430, which categorizes it under other professional and technical training, indicating a focus on specialized technical education and support rather than general IT services. The contract was posted on July 1, 2026, and is associated with the Department of Defense through its Fleet Readiness Center, underscoring its mission-critical nature within a defense infrastructure context. The location and scope require a physical presence at the facility, ensuring immediate, hands-on assistance to maintain operational readiness and software proficiency across engineering teams.

Professional and Management Development Training

POSTED

DEADLINE

CAD Software Integration & Interoperability SupportThe contract requires technical support to integrate Solid Edge with legacy CATIA V4 and V5 systems using CAD translators, ensuring seamless data compatibility, precise model accuracy, and uninterrupted workflow continuity between modern and legacy design environments. The work focuses on resolving interoperability challenges that arise during file translation, maintaining geometric integrity, preserving design intent, and supporting engineering teams throughout the transition process without disrupting ongoing production or design activities. Performance is localized to a facility with a zip code of 28532 under the Department of Defense’s Fleet Readiness Center, operating as a subcontract under NAICS code 541512 for computer systems design services. The effort demands deep expertise in both Solid Edge and CATIA V4/V5 environments, including advanced knowledge of translator configurations, tolerance alignment, layer mapping, and attribute preservation. The contractor must deliver reliable, repeatable solutions that enable cross-platform collaboration, minimize error rates during data exchange, and provide documentation and training to sustain long-term operational effectiveness.

Computer Systems Design Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

J061--FY 26 Services (Base+?) - NYH Triennial Electrical Power Distribution System Maintenance and Testing

Solicitation # 36C24226Q0217

242-NETWORK Contract Office 02 (36C242)

POSTED

CLOSED

Inspection, maintenance and repair of cryogenic storage tanks.

Solicitation # N68520-26-Q-1007

Fleet Readiness Center

POSTED

DEADLINE

in about 2 months

Preventative Maintenance and Repairs for Uninterrupted Power Supply, Generators, and Automatic Transfer Switches

Solicitation # PAN413-25-P-0000-025387

0413 Aq Hq Rco-Hi

POSTED

CLOSED

USCGC Kanawha Dockside Sewage Piping Clean and Flush

Solicitation # 70Z02926QNEWO5345

Base New ORLEANS(00029)

POSTED

CLOSED

Annual Generator Maintenance Services at Seattle and American Lake VA Medical Center

Solicitation # 36C26026Q0206_1

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

USCGC Kanawha Dock Side Exhaust Cleaning

Solicitation # 70Z02926QNEWO0009

Base New ORLEANS(00029)

POSTED

CLOSED

Presolicitation- Paint Booth Cover and Filter Removal and Replacement

Solicitation # N42158-26-SIMACQ-NNSY-970-0002

Norfolk Naval Shipyard Gf

POSTED

CLOSED

Overhead Door Repair

Solicitation # FA8125-26-Q-0024

FA8125 Afsc Pzima

POSTED

CLOSED

Seattle VA Portable Fire Extinguisher Maintenance Service RFQ

Solicitation # 36C26026Q0168

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

TEGUC-Preventive Maintenance for Generators at NEC

Solicitation # 19H08026Q0013

US Embassy Tegucigalpa

POSTED

CLOSED

Solicitation # N0018926MHE

Navsup Flt Logistics Ctr Norfolk

POSTED

CLOSED

Slipring Repair Services

Solicitation # 70Z04026Q60363

Sflc Procurement Branch 3(00040)

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS