This Government Contract opportunity from Department Of Defense was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Custom Display Fabrication & Material Manufacturing

Closed

Federal

Submission Closed06/02/2026, 06:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339950

New

SLED

Traffic Control Device Supplier

South Dakota State Government

POSTED

DEADLINE

Traffic Control Devices Annual

Solicitation # 26IFB19956

Solicitation 26IFB19956 is an Invitation for Bids issued by the South Dakota Office of Procurement Management for an annual contract to provide traffic control devices delivered within the state of South Dakota. The contract will be awarded to the lowest responsible and responsive bidder who meets all specified requirements. Bids must be submitted by September 24, 2026, either through the ESM Solutions electronic procurement system or as sealed paper submissions delivered to the SDOPM. The agreement requires all furnished items to be new and of current production, with deliveries typically expected within 30 days of order receipt. Shipping terms are F.O.B. destination, with unit prices inclusive of all transportation and delivery charges. Selected vendors must maintain general liability, workers compensation, and automobile liability insurance, and may be required to provide bid or performance security. Compliance with the South Dakota Prompt Payment Act is mandated, with interest accruing on invoices unpaid after 45 days. Additionally, contractors must adhere to non-discrimination standards, including Executive Order 11246 and Title VI of the Civil Rights Act of 1964.

South Dakota State Government

POSTED

DEADLINE

D12 - (1) Pickup Truck Mounted Message Board

Solicitation # SRC0000041799

Dept Of Transportation

POSTED

DEADLINE

Solicitation # 140A0926Q0035

Solicitation 140A0926Q0035 is a request for quotes for commercial fencing supplies, including barbed wire, posts, clips, and gate angles, to be delivered to the Navajo Region Farmington Field Office. Issued by the Department of the Interior's Bureau of Indian Affairs Navajo Region, the contract is categorized under NAICS code 339950 and will be awarded as a firm-fixed-price purchase order. The period of performance is scheduled from September 11, 2026, to October 31, 2026. This procurement is a 100 percent set-aside for Indian Small Business Economic Enterprises under the Buy Indian Act, specifically adhering to 25 U.S.C. 47 and DIAR Part 1480. Eligible offerors must submit an Indian Economic Enterprise Representation Form to self-certify their status at the time of the offer, at the time of award, and throughout the entire duration of the contract. Quotes must be submitted by the deadline of September 9, 2026.

POSTED

DEADLINE

Channel Letter Wall Sign Fabrication and Installation

City of Jurupa Valley

POSTED

DEADLINE

Master Application (MA) No. MA26247 (SDP26093)

City of Jurupa Valley

POSTED

DEADLINE

HDU Sign Panel Fabrication & Finishing

POSTED

DEADLINE

Parks Entrance Sign Rebranding

Solicitation # 20260259

The City of Port St. Lucie has issued Invitation for Bid 20260259 for the rebranding of 41 Parks and Recreation entrance signs. The project focuses on creating a unified visual identity across the park system by replacing topper and middle panels on existing sign structures. The scope of work includes the fabrication of high-density urethane panels, painting with specific PMS color matching and satin finishes using Matthews Paint products, and the addition of park establishment dates. The project involves various sign types, including single-face and double-face neighborhood and community signs, as well as a specialized panel for Jessica Clinton Community Park. The initial contract term is 180 calendar days, with work permitted from 7:00 a.m. to sundown, Monday through Friday. Bids must be submitted electronically via the OpenGov portal by October 8, 2026, at 3:30 p.m. Requirements for submission include a bid bond of at least 5 percent of the bid total, which can be submitted as a hard copy or an electronic bond through Surety2000. The City will award the contract based on the best value, considering cost, contractor capability, and local preference, though the lowest price is not the sole determining factor. Performance and payment bonds are required for projects exceeding 200,000 dollars. Payment is subject to a 5 percent retainage and follows the Florida Prompt Payment Act, with invoices submitted monthly. Contractors must also certify compliance with drug-free workplace laws, anti-human trafficking regulations, and Florida's scrutinized companies lists.

POSTED

DEADLINE

Police Placards and American Flags

Solicitation # S26-0610

The Orlando Police Department has issued a Notice of Intent to Award a sole source contract, solicitation number S26-0610, for the procurement of custom PVC police placards and American flags. Federal Eastern International LLC has been identified as the exclusive authorized distributor for these products within the state of Florida, supported by authorization from Ready Line LLC. The solicitation was posted on September 10, 2026, and will remain active for seven calendar days. Any supplier capable of providing the same products must submit their qualifications and capabilities to the designated procurement agents, Jay Carr and Tracie Brown, by the deadline of September 17, 2026, at 5:00 p.m. ET.

Orlando Police Department

POSTED

DEADLINE

PLATE, IDENTIFICATION

Solicitation # SPE8E6-26-T-4583

Solicitation SPE8E6-26-T-4583 is a request for quotations issued by DLA Troop Support Construction and Equipment (Class IV) for the procurement of 20 identification plates. The required items are identified as Parker-Hannifin Corporation 82106 P/N 92948 with NSN 9905017340513. The delivery is required within 160 days, with a need ship date of March 1, 2027, and an original required delivery date of May 5, 2027. The items are to be delivered to the DLA Distribution Depot Hill at Hill AFB, Utah, with inspection and acceptance occurring at the destination. The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and adheres to various technical and quality requirements, including RA001, RP001, RQ011, RC001, and RD003. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization must follow RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is subject to the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Quotes must be submitted via the DIBBS portal by September 21, 2026.

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, HIDALGO CO, LARGE SIGN REPLACEMENT

Solicitation # 6497-69-001_1026

The Texas Department of Transportation is soliciting bids for a state let maintenance contract focused on large sign replacement along IH0069 in Hidalgo County. The estimated cost for this project is 1,197,322.04 dollars. The solicitation, identified by number 6497-69-001_1026, was posted on September 10, 2026. Interested parties must submit their responses by the deadline of October 6, 2026.

Texas Department of Transportation

POSTED

DEADLINE

Digital LED Signage Supply

W7MT Uspfo Activity Alang 117

POSTED

2 days ago

DEADLINE

in 10 days

AI Contract Overview

The contract involves the physical fabrication of mural components designed for installation in the Pentagon, with an emphasis on using durable and fire-compliant materials to ensure safety and longevity. The work includes precision cutting, assembly, and finishing of these components, ensuring quality and adherence to specified standards. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, aligning with the requirements of FAR 19.5, and falls under the NAICS code 339950, which pertains to custom manufacturing. Issued by the Department of Defense, specifically through the FA2517 21 Cons Bldg 350 office, the contract calls for specialized material manufacturing and custom display fabrication. The place of performance is located in Washington, with the solicitation issued on May 27, 2026, and proposals due by June 2, 2026. This opportunity prioritizes small business participation and requires compliance with federal safety and quality standards essential for installations within a high-security, sensitive environment like the Pentagon.

General Info

Fabrication of fire-compliant mural components for Pentagon; small business set-aside; quality and safety required.

Agency

Department Of Defense → FA2517 21 Cons Bldg 350View Agency

NAICS

339950 - Sign ManufacturingView NAICS

Place of Performance

Washington, DC, USA

Set-Aside

SBA

Documents

This scope was carved out of SS-FA251726QA012.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USNORTHCOM Pentagon Corridor Display

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 27

subcontract

Response DeadlineJun 2

Deadline has passed

Submission Closed

06/02/2026, 06:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA2517 21 Cons Bldg 350

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2517 21 Cons Bldg 350

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Physical fabrication of mural components using durable, fire-compliant materials suitable for installation in the Pentagon, including precision cutting, assembly, and finishing.