DOCKSIDE REPAIRS OF CGC GALLATIN (WHEC 721)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Solicitation number is HSCG85-13-R-P45F17 is issued as a Request for Proposals. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This Request for Proposal incorporates provisions and clauses in effect through Federal Acquisition Circular 05-64. This is a total small business set-aside. The NAICS Code is 336611 with a size standard of 1,000 employees. The contract will be awarded on a firm-fixed-price basis contingent to the availability of funds (see FAR Clause 52.232-18, Availability of Funds, below). It is the policy of the Coast Guard to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the General Accounting Office (GAO). Interested parties are encouraged to seek resolution of their concerns within the Coast Guard as an Alternative Dispute Resolution (ADR) forum, rather than filing protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file formal agency protest with the Contracting Officer or Ombudsman. Informal forum with the Ombudsman. Interested parties who believe that Coast Guard procurement is unfair or otherwise defective should first direct their concerns to the cognizant Contracting Officer. If the Contracting Officer is unable to satisfy the concerns, the interested party is encouraged to contact the Coast Guard Ombudsman for Agency Protests. Under this informal process, the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, Contracting Officer, and solicitation closing date (if applicable). Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the Contracting Officer through open and frank discussions. If the protester's concerns are unresolved, an independent review is available by the Ombudsman. The protester may file formal agency protest to either the Contracting Officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency's goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth at FAR 33.103(d)(2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. This will not preclude re-filing of the protest to meet the requirement. To be timely, protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be forwarded to: Commandant (CG-913), U.S. Coast Guard Headquarters, Acquisition Planning and Performance Measurement, 1900 Half St. S.W. Room 11-0402, Washington, DC 20593, Telephone +1 (555) 000-0000. The requirement is for dockside repairs aboard CGC GALLATIN consisting of the following items in accordance with the attached specification. REQUIRED DOCUMENTS: Each offeror shall furnish the information required by the solicitation, which includes: 1. Price Schedule filled out with a cost associated with each work items. 2. Past Performance Documents 3. Small Business Self Certification for applicable set aside 4. Welding Certifications & Procedures 5. Proof of Insurance (Statement of coverage from current insurance carrier) MAILED and E-MAILED offers will be accepted. FAXED OFFER will NOT be accepted. E-mailed proposals will be sent to: contact@example.gov. Please note, proposals that do not include all required documents may be considered incomplete and will not be considered in the evaluation process of the requirement. ANTICIPATED AWARD DATE: The contract is expected to be awarded on or about 03 June 2013. Work covered by this requirement shall be completed within 26 calendar days from the date the vessel becomes available to the Contractor. The performance period is 15 July 2013 through 09 August 2013. QUESTIONS AND REQUEST FOR DRWAINGS: The last day to request drawings or ask clarifications regarding this requirement is 17 May 2013 2:00 P.M., Pacific Standard Time. Request for clarifications will be submitted via e-mail to contact@example.gov. After this date further requests may not be accepted. Schedule of Supplies/Services CLIN 0001 - DEFINITE ITEMS: Work Item D-01 Gas Turbine Exhaust System Internal Inspection, 1 Job, tiny_mce_marker_________ Work Item D-02, Main Gas Turbine Exhaust Repair, 1 Job, tiny_mce_marker_____________ Work Item D-03, Gas Turbine Insulation Renewal, 1 Job, tiny_mce_marker____________ TOTAL AMOUNT OF DEFINITE ITEMS tiny_mce_marker__________________ CLIN 0002 - Composite Labor Hour Rate: The following labor hour rate in shall be used in pricing all contract changes in accordance with the clause entitled "COMPOSITE LABOR HOUR RATE FOR CONTRACT CHANGES." CLIN 0002, Composite Labor Hour Rate, tiny_mce_marker____/hr x 350 hours = tiny_mce_marker_____________ NOTE: The estimated quantity and extended amount indicated above are for evaluation of offers only. The quoted rate will apply to all changes involving additional work under this contract regardless of the actual total hours required. Period of Performance: 15 July 2013 through 09 August 2013 Place of Performance: CGC GALLATIN homeport in Charleston, SC Inspection of Vessel: CGC GALLATIN is available for inspection during the solicitation at the Federal Law Enforcement Training Center (FLETC) Facility, 1050 Register Street, Charleston, SC 29405. All prospective offerors are strongly encouraged to visit the vessel and visually inspect each item of work and to become acquainted with local conditions, locations of items and fixtures, removals, replacements, interference and the nature of work. Points of contact to arrange access to vessel are as follows: LT Sean Munnis, GALLATIN Port Engineer, +1 (555) 000-0000 LT Wayne Barfield, GALLATIN Engineering Officer, +1 (555) 000-0000 Offerors' personnel requiring access must provide name, date of birth and social security numbers to either one of the points of contact above prior to arrival. Closing date/time for submission of offers is 31 May 2013 at 2:00 P.M., Pacific Standard Time. Submit responses to: U.S. Coast Guard Surface Forces Logistics Center 1301 Clay Street, Suite 800N Oakland, CA 96412 Attn: Valerie Rivera-Chase Electronic offers by email to contact@example.gov are acceptable and encouraged. This solicitation incorporates by reference FAR 52.212-1, 52.212-4, 52.212-3, 52.212-5 and their addenda. FAR 52.212-4 CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEMS (FEB 2012) ADDENDUM FAR 52.232-18 AVAILABILITY OF FUNDS (Apr 1984) Funds are not presently available for this contract. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer. 52.232-99, Providing Accelerated Payment to Small Business Subcontractors (DEVIATION) (AUG 2012) This clause implements the temporary policy provided by OMB Policy Memorandum M-12-16, Providing Prompt Payment to Small Business Subcontractors, dated July 11, 2012. (a) Upon receipt of accelerated payments from the Government, the contractor is required to make accelerated payments to small business subcontractors to the maximum extent practicable after receipt of a proper invoice and all proper documentation from the small business subcontractor. (b) Include the substance of this clause, including this paragraph (b), in all subcontracts with small business concerns. (c) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://www.arnet.gov/far/index.html Clause No. Clause Title Date FAR 52.229-3 Federal State, and Local Taxes FEB 2013 FAR 52.232-99 Providing Accelerated Payments to Small Business Subcontractors (Deviation) AUG 2012 FAR 52.242-2 Production Progress Reports APR 1991 FAR 52.242-15 Stop-Work Order AUG 1989 FAR 52.242-17 Government Delay in Work APR 1984 FAR 52.245-1 Government Property Alternate 1 (APR 2012) APR 2012 FAR 52.245-9 Use and Charges APR 2012 FAR 52-246-2 Inspection of Supplies - Fixed Price AUG 1996 FAR 52.246-4 Inspection of Services - Fixed-Price AUG 1996 FAR 52.246-16 Responsibility for Supplies APR 1984 FAR 52.247-55 F.O.B. Point for Delivery of Government Furnished Property JUN 2003 HSAR 3052.211-70 Index of Specification DEC 2003 HSAR 3052.217-90 Delivery and Shifting of Vessel DEC 2003 HSAR 3052.217-91 Performance DEC 2003 HSAR 3052.217-92 Inspection and Manner of Doing Work DEC 2003 HSAR 3052.217-93 Subcontracts DEC 2003 HSAR 3052.217-95 Liability and Insurance DEC 2003 HSAR 3052.217-96 Title DEC 2003 HSAR 3052.217-97 Discharge of Liens DEC 2003 HSAR 3052.217-98 Delays DEC 2003 HSAR 3052.217-99 Department of Labor Safety and Health Regulations for Ship Repair DEC 2003 HSAR 3052.217-100 Guarantee (90 DAYS) JUN 2006 HSAR 3052.222-70 Strikes or Picketing Affecting Timely Completion of the Contract Work DEC 2003 HSAR 3052.222-90 Local Hire JUN 2006 HSAR 3052.223-70 Removal or Disposal of Hazardous Substances-Applicable Licenses and Permits (30 days) JUN 2006 HSAR 3052.223-90 Accident and Fire Reporting DEC 2003 HSAR 3052.242-70 Dissemination of Contract Information DEC 2003 HSAR 3052.242-72 Contracting Officer's Technical Representative DEC 2003 HSAR 3052.245-70 Government Property Reports DEC 2003 ADDITIONAL WORK A. If the need for additional work develops, the Contractor must obtain authority orally or in writing from the Contracting Officer before proceeding with such work. B. To the extent requested by the Contracting Officer, the Contractor shall prepare and submit written proposals for proposed change orders, which may be required to include: (1) A complete breakdown of labor hours and costs by labor category and phase of work as identified by the Contracting Officer; (2) A complete breakdown of material costs showing material required, source (with point of contact), part number, unit and extended cost and contractor's material handling costs. (3) A complete breakdown of labor and material as described above for each proposed subcontractor. C. The contractor shall submit written proposals and breakdown to the Contracting Officer via e-mail at contact@example.gov. COMPOSITE LABOR HOUR RATE FOR CONTRACT CHANGES 1. The composite labor hour rate price in the Schedule of Supples/Services shall be the sole labor hour rate used to price the prime contractor's direct labor hours for all contract changes, whether growth within scope or new work. The contractor shall not receive any compensation in addition to this rate for prime contractor's direct labor associated with changes under this contract. 2. The composite labor hour rate shall represent total compensation for the following: direct labor; any port or association fees, rents or other levies; all overhead and general and administrative costs; profit; and all direct and indirect costs and profit associated with following support functions: Supervision QualityAssurance Planning Engineering Surveyors Fire Watch Transportation/Drivers Worker Transit Time Material Handling Testing Cleaners Guards Estimating Contract Administration 3. The composite labor hour rate will be used in pricing production labor hours. This shall include only those hours necessary and reasonable to perform direct production functions, and will not include the support functions listed above, whether the contractor normally charges such support functions directly or indirectly by the contractor's accounting system. These support functions are to be priced into the bid rate and shall not be separately compensated. 4. The Estimated Quantity indicated by the Government in the Schedule of Supplies/Services is an estimate only, and the Extended Amount indicated by the bidders in the Schedule of Supplies/Services is not ordered by award of a contract pursuant to this solicitation. The Estimated Quantity represents the Government's best estimate of the total number of hours that will be required. The actual number of hours may be greater or less. INSURANCE REQUIREMENTS A. The contractor shall be required to procure and thereafter maintain the following insurance: (1) Ship repairer's legal liability insurance to insure the risks described in HSAR 3052.217-95 Liability and Insurance (DEC 2003), in the amount of $300,000.00. (2) Comprehensive general liability insurance to insure the risks described in HSAR 3052.217-95 Liability and Insurance (DEC 2003), in the amount of $300,000.00 on account of any one accident or occurrence with respect to each cutter, boat and barge upon which work is to be performed under this solicitation and the contract resulting there from; (3) Full insurance coverage in accordance with the State Workmen's Compensation law; and (4) Full insurance coverage in accordance with the United States Longshore and Harbor Workers' Compensation Act. B. As evidence that he has obtained the insurance specified in this schedule, the contractor shall furnish the contracting officer with a certificate or certificates executed by an agent of the insurer authorized to execute such certificates. Such certificate shall be furnished before commencement of work. Each certificate shall state that (NAME OF INSURER) has insured (NAME OF CONTRACTOR), in accordance with the Liability and Insurance clause and the Insurance Requirements clause contained herein. Each certificate shall set forth that each policy of insurance represented thereby will expire on (DATE) and that each such policy contains the following clause: "It is agreed that in the event of cancellation, or any material change in the policy adversely affecting the interest of the Government in this insurance, thirty (30) days' prior written notice will be given to the Contracting Officer." C. A bidder who proposes to self-insure for any of the risks set forth in the Liability and Insurance clause and in the Insurance Requirements clause contained herein shall submit satisfactory evidence to permit the Contracting Officer to determine that the bidder's assets are sufficient for the risks set forth in such clauses. The bidders shall submit with his offer two (2) certified copies of documents listing his assets and liabilities and such other information as deemed necessary by the Bidders or as required by the Contracting Officer. For approval of self-insurance under the State Workmen's Compensation Law and the United States Longshore and Harbor Workers' Compensation Act, evidence of qualifications as a self-insurer under the applicable compensation statute must be furnished to the contracting officer. ACCESS TO VESSEL A. A reasonable number of officers, employees and associates of the Government, or other prime contractors with the Government, and their subcontractors, shall, as authorized by the Contracting Officer, have at all reasonable times, admission to the contractor's facility, and access to the cutter to perform and fulfill their respective obligations to the Government on a noninterference basis. All such above personnel shall comply with all contractor rules and regulations governing personnel at its facility, including those relative to safety and security. B. The contractor further agrees, as authorized by the Contracting Officer, to afford to a reasonable number of officers, employees, and associates of other offerors when inspecting contemplated work, the same privileges of admission to the contractor's facility and access to the cutter on a noninterference basis, subject to all contractor rules governing personnel at its facility, including those relating to safety and security. INDEMNIFICATION FOR ACCESS TO VESSELS Notwithstanding any provision in the "Access to Vessels" clause, or any other clause of the contract, the Contractor agrees to allow officers, employees, and associates of the Government, or other Prime Contractors with the Government and their subcontractors, and officers, employees, and associates of offerors on other contemplated work, admission to the Contractor's facilities and access to the vessel without any further request for indemnification from any party, which has not been previously included in the contract price. INSPECTIONS Except as specified elsewhere, the U.S. Coast Guard shall rely on the Contractor to accomplish all inspection and testing needed to ensure that the work conforms to contract quality requirements. Records of all inspection work by the Contractor shall be kept complete and available to the Government during the term of this contract and for such longer period as may be specified elsewhere in this contract. The name and telephone number of the U.S. Coast Guard Inspector will be provided after the award of a contract resulting from this solicitation. DISCOVERIES AND CHANGES TO CONTRACT: Condition Found Report, Change Orders and Quick Chits will be transmitted electronically by using email. The bullets below display the process of how these documents are to be followed for the duration of the contract performance period: (a) Condition Found Report (CFR) - All readings and inspections are to be taken within 24 hours after the machinery or system is opened. All reports of reading and inspections required by the specifications shall be submitted to the COR in writing using a "Condition Found Report (CFR)" form, within 24 hours after the readings and/or inspections are made. Promptness in taking and reporting readings is particularly important for underbody work items such as shaft bearing or rudder bearing clearances. Often during the progress of a work item, conditions are discovered by the contractor which are considered abnormal for reasons of safety, expected reliability, health, or habitability. These conditions must be brought to the attention of the Coast Guard using a CFR. Details provided by the Contractor in a CFR are important because the CFR may result in a contract change. To speed the contract change progress, the Contractor should include in his/her CFR the following details as a minimum: (i) A sequential number. (ii) The contract item which the "CFR" relates to. (iii) A clear statement, definition, and description of the condition found, including but not limited to frame numbers, part numbers, materials and dimensions as appropriate. (iv) A proposed or recommended repair to correct the defective condition. (v) Indicate whether the report requires Cost Guard action, or if it is provided "for info" only. If action is required, indicate the response time required by the Coast Guard and whether or not a contract extension would be needed if the additional work is authorized. (vi) A space on the form for the Coast Guard to make comments. (vii) All CFR's willl be dated, submitted, and signed by a representative of the Contractor. Contracting Officer's Representative (COR) will respond to the Contractor's within 24 hours of receiving a Condition Found Report. A copy of ALL condition found reports shall be retained in the Cutter's file. (b) Change Request Process will occur when the contemplated change is above $3,000.00 in the following order: 1. Condition Found Report-Generated by the contractor and provided to COR . 2. Condition Report Reply-Generated by the COR and provided to Contractor 3. Change Request- CR and IGE are generated by the COR and entered in the Contract Workbook. COR will assign the Change request number. 4. COR provides copy of Change Request to the Contractor 5. Contractor's Proposal- Provided to the KO for the identified tasking on CR 6. Negotiations- If needed, take place to establish pricing 7. Approved Change Request- Forwarded to Contractor and COR by the KO Change Request must be submitted by the COR to the contractor within 24 hours after responding to the CFR. Contractor must submit proposal to the Contracting Officer within 72 hours receipt of the Change Request. (c) Quick Chit Process will occur when the contemplated change is below $3,000.00 in the following order: 1. Condition Found Report-Generated by the contractor and provided to COR . 2. Condition Report Reply-Generated by the COR and provided to Contractor 3. Quick Chit - COR will go over the scope of work with the contractor and request to submit a proposal for the change 4. Contractor's Proposal- Provided to the COR within 24 hours. 5. Negotiations - COR and Contractor's representative will negotiate to establish pricing for the change. Once COR and Contractor agree on scope of work and associated costs, COR will assign a Quick Chit number and fill in agreed price. 6. Approved Change Request- COR to forward (via e-mail or fax) copies of agreed settlement to Contractor, and enter all information in to Contract Workbook. A modification will be issued to incorporate and implement all changes made by change orders and quick chits. WELDING CERTIFICATIONS AND QUALIFICATIONS This contract may contain welding line items as either Definitive or Optional Items. With his/her proposal the Contractor shall provide the necessary welding certifications and qualifications as required by the specification for the applicable work item(s), and SFLC Standard Specification 0740_STD. Subsequent to contract award, the Government will require the contractor to submit applicable certifications and qualifications for any welding to be performed on any proposed change request. VOLATILE ORGANIC COMPOUNDS (VOC) REGULATIONS (a) Contractors are required to comply with federal, state and local VOC compliance laws and regulations. Among other requirements, certain Contractors may also be required to operate pursuant to a Title V permit. The need for such a permit will depend on the provisions of the applicable state's -State Implementation Plan? (SIP) and the type/quantity of the Contractor's regulated emissions, including VOCs. Certain SIPs may also mandate certain Contractors to operate under the terms of a compliance plan intended to reduce VOC emissions. (b) Contractors, therefore, must submit the following to the designated Port Engineer not later than two weeks after contract award: (1) Copies of any federal, state or local permits required and applicable to the use or application of VOCs at Contractor's facility or offsite work places; (2) Copies of any compliance plans required and applicable to the use or application of VOCs at Contractor's facility or offsite work places. (c) If no federal, state or local permits or compliance plans are required and applicable to the use or application of VOCs at Contractor's facility or offsite workplaces, then Contractor shall submit to the designated Port Engineer a letter, notarized under oath, that such documents are not required. (d) Contractors will submit the following to the designated Port Engineer not later than two weeks after contract award: Data Sheets (MSDS) documents, certificates, specifications or any other manufacturing data verifying the VOC ratings of paints to be applied to the Cutter in accordance with MLCA Standard Spec 63000N, Section 5.3.1 SECURITY REQUIREMENTS A. For each affected Coast Guard facility, the Contractor shall provide a list of all on-site personnel, including sub-contractors (including second and third-tier subcontractors) and suppliers, to the Contracting Officer. The contractor shall update this list when changes occur. Contractor personnel not listed may be denied access to the Coast Guard facility. Contractor personnel will be restricted to designated working areas. Any personnel violating this policy may lose access to the Coast Guard facility. Contractor personnel shall have photo identification at all times while working on Coast Guard facilities. B. Contractor and delivery personnel may be required to present personal photo identification to gain access to a Coast Guard installation. If identification does not indicate United States citizenship, Coast Guard Security may require proof of the legal right to work in the United States. Contractor and delivery personnel also may be subjected to an immigration status and outstanding criminal warrants check. C. Contractors shall provide the Contracting Officer's Technical Representative with 24 hours of advance notice of every delivery to the site (e.g., concrete, lumber, parts, etc.) and provide the company name, delivery person, and phone number of the firm(s) making deliveries. All vehicle access to government property requires vehicle registration and proof of liability insurance. Otherwise access to the Coast Guard facility may be denied. METHOD OF PAYMENT AND INVOICING INSTRUCTIONS INVOICE SUBMISSION PROCESS: 1. The Contractor shall prepare a proper invoice IAW FAR clause 52.212-4, and in addition to the information required by FAR 52.212-4(g) as cited in the contract. All invoices shall be itemized to correlate to the Schedule of Supplies/Services. (A) The Government will make payment under this contract based on a percentage or stage of completion. The Contractor may invoice each contract line item (CLIN) as work progresses. The amount invoiced shall be calculated based on those prices stipulated in the contract Schedule of Supplies/Services as follows: (B) A CLIN may not be invoiced until the percentage complete reaches 25 percent. Future invoices for that CLIN have no limitation as to the percentage of completion required before invoicing. (The minimum percentage of completion (25%) to be reached prior to billing each CLIN may be waived by the Contracting Officer on a case by case basis for large dollar CLINS.) (C) In addition to the information required by FAR 52.212-4 (g) Invoices shall include: 1) Contract Number, Delivery Order/Task Order Number, DOC Number 2) Name and Address of the Contractor 3) Invoice Number and Invoice Date 4) DUNS Number 5) Name of the Contract Specialist and Contracting Officer's 6) Invoice Routing Code (IRC): SFLC-2 7) Indicate Small Business Status 8) Indicate if Final Invoice. The Contractor's final invoice submitted under the contract must be marked as follows: ?THIS INVOICE CONSTITUTES THE FINAL INVOICE - UPON PAYMENT OF THIS INVOICE NO OTHER MONIES ARE DUE UNDER CONTRACT NUMBER (to be assigned upon contract award). 9) The percentage of completion for each CLIN identified; 10) Vessel name; 11) The overall percentage and dollar amount previously billed, currently billed and unbilled; 12) Shipping and Payment Terms; 13) Name, title, phone number, and mailing address of person to be notified in the event of a defective invoice. All information must be included in an invoice for it to constitute a proper invoice. All improper invoices will be rejected which could delay payment. 2. The Contractor shall forward invoices via e-mail contact@example.gov or in person to the Contracting Officer's Technical Representative (COR). 3. The COR shall review and verify invoices, sign the invoice and return the invoice to the Contractor. 4. The Contractor shall complete the Contractor Invoice Submission Form (sample attached). 5. The Contractor shall submit the Contractor Invoice Submission Form, a PDF file of the invoice, and any necessary documents for supplies or services via the U.S. Coast Guard Finance Center website at: http://www.fincen.uscg.mil/centralinv/central_inv_contr.cfm Contractor Invoice Submission Form Directions: Please complete as much information as possible. All blocks in red text are required entries. Note: Web-Invoices are accepted only for Coast Guard Contracts over the Simplified Acquisition Threshold (Document Type 24). THIS WEB FORM IS NOT AN OFFICIAL INVOICE. THE OFFICIAL INVOICE MUST BE ATTACHED Invoice Information Invoice Routing Code: (help) Invoice Number: (help) Contract Number: (help) Invoice Date: (help) BPA Number: (help) Invoice Amount: (help) Delivery/Task Order Number: (help) Discount Terms: % Discount Days: Net Days: (help) Company Information Attachment of Official Invoice Company Name: (help) DUNS: Plus 4: (help) Point of Contact Name: (help) Point of Contact Email: (help) Phone: (help) Fax: (help) Please verify your entry on the next page. Attach invoice and any supporting documentation after verification. - Attachment must be a single PDF file no larger than 3 MB. Grey-scale PDFs are not compatible. This will be our official invoice. Supporting documentation must be combined in the single PDF file or submitted to your contracting office separately via email. - Need help creating a PDF file? Click here for instructions. 6. The Contractor must select the correct Invoice Routing Code for timely invoice processing. The Invoice Routing Code for this contract is SFLC-2. 7. Visit the U.S. Coast Guard Finance Center Website for instructions regarding invoice attachments. http://www.fincen.uscg.mil/centralinv/central_inv_contr.cfm 8. A copy of the invoice and any supporting documentation shall also be e-mailed to the following individuals: contact@example.gov Additional work verbally agreed to by the parties that has not yet been incorporated into the contract by modification shall not be included in an invoice. Payments will not be made for any work to which a modification has not been properly executed. Invoices submitted for payment that includes such a request will be reduced by the unmodified amount NOTE: 10% OF THE TOTAL CONTRACT PRICE WILL BE WITHHELD UNTIL ALL DELIVERABLES, REQUIRED BY THE CONTRACT, ARE RECEIVED AND ACCEPTED. FURTHER CONSIDERATIONS WITH INVOICING: In accordance with the Prompt Payment Act, for the purposes of determining a payment due date and the date on which interest will begin to accrue if a payment is late, a proper invoice shall be deemed to have been received: (1) On the later of: (i) For invoices that are mailed the date a proper invoice is actually received by the designated billing office and annotates the invoice with date of receipt at the time of receipt. (ii) For invoices electronically transmitted by the contractor via web based submission, the date a transmission is received by the designated billing office, and receipt confirmation is provided to the designated recipient; or (ii) The seventh day after the date on which the property is actually delivered or performance of the services is actually completed; unless- a) The agency has actually accepted the property or services before the seventh day in which case the acceptance date sh...