Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Dornier Genesis System Field Engineering & Maintenance

Active

Federal

Response Deadline10/29/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Dornier Genesis System Field Engineering and Maintenance subcontract involves providing full-service preventive and corrective maintenance for Dornier Genesis Imaging Systems at the Naval Medical Center San Diego. Supporting the Defense Health Agency, the contractor is responsible for performing planned maintenance four times per year per unit along with emergency repairs. The primary objective is to maintain a 95 percent system uptime in accordance with ISO and Joint Commission standards, utilizing OEM-specific diagnostic tools. To ensure compliance and quality, the contract requires the deployment of OEM-trained technicians who must obtain Common Access Card issuance. Deliverables include the provision of fully functional systems and the submission of detailed field service reports. This effort falls under NAICS code 811210 and is performed on-site in San Diego, California.

General Info

Agency

Department Of Defense → Defense Health Agency Hcd West

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

San Diego, CA, 92134, USA

Set-Aside

NONE

Documents

This scope was carved out of HT941027N0007.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Service maintenance on (3) three Dornier Genesis Imaging Systems at the Naval Medical Center San Diego

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Health Agency Hcd West

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Health Agency Hcd West

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs full-service preventive and corrective maintenance for prime contractors on Defense Health Agency projects at Naval Medical Center San Diego. Conducts planned maintenance 4 times per year per unit and emergency repairs for Dornier Genesis Imaging Systems. Uses OEM-specific diagnostic tools to maintain 95% uptime per ISO and Joint Commission standards. Requires OEM-trained technicians and CAC issuance. Delivers functional systems and field service reports.

Similar Contracts

Same NAICS industry code

The Provision of OBSIDIAN Support

Solicitation # ocds-h6vhtk-06bcf9

The Ministry of Defence is seeking a contractor for a 24-month support, maintenance, and training contract for the OBSIDIAN Electronic Surveillance (ES) system, a critical Electromagnetic Spectrum exploitation capability used by the Field Army. Running from February 9, 2027, to February 8, 2029, the contract is valued at 2,375,000 GBP excluding VAT. The scope of work includes providing full in-service support such as routine maintenance, break/fix repairs, and software and firmware updates. Additionally, the contractor must provide annual trainer recertification, user training, secure connectivity support for both home base and deployed operations, OEM liaison, engineering assurance, and quarterly performance reporting. The successful supplier must ensure the full operational availability of OBSIDIAN systems while complying with MOD safety and environmental standards. Awarding will be based on a Value for Money Index, which balances a quality score—assessing technical quality, social value, innovation, and compliance—against the total submitted price. This procurement is open to small and medium-sized enterprises as well as voluntary, community, and social enterprises. Tenders must be submitted in English by January 6, 2027.

Ministry of Defence

POSTED

about 3 hours ago

DEADLINE

Fluid Valve Stem Repair and OverhaulThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the teardown, evaluation, and repair of Fluid Valve Stems (NSN 7HH 4820-01-317-3612) for prime contractors on Department of the Navy projects. The scope of work requires the execution of overhauls in strict accordance with technical manuals and directives, utilizing precision machining and electrostatic discharge protection protocols to ensure the delivery of functional, repaired stems with DLR labeling. Compliance is mandatory regarding physical marking standards per MIL-STD-130 and the application of unique item identifiers as specified in DFARS 252.211-7003. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Industrial Fluid Cooler Repair and OverhaulThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the comprehensive repair and overhaul of an industrial fluid cooler with NIIN 016593173. The scope of work includes the complete teardown, technical evaluation, and restoration of the unit through leak testing, tube cleaning, and fin repair to ensure compliance with government or OEM specifications. The contractor is responsible for delivering a fully functional unit along with all necessary MSDS documentation. Operational requirements include strict adherence to OSHA and FED STD 313 guidelines for the management of hazardous materials. Additionally, the contractor must provide UID reporting for any assets valued over 5,000 dollars. This project falls under NAICS code 811210 and is intended for prime contractors supporting DLA and Navy projects.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

EDG Run-in, Break-in, and Operational RetestThis subcontract for the Department of Defense, specifically the NSWC Philadelphia Division, involves providing technical testing and cylinder balancing for prime contractors on Navy NSWCPD projects. The primary objective is to return Emergency Diesel Generators to original equipment manufacturer specifications through the execution of engine run-in and break-in procedures. The contractor is responsible for monitoring performance using specialized engine analyzer equipment and adjusting cylinders to ensure balance in accordance with reference 2.3 and PMS MRC 7EER. The successful contractor must deliver balanced engine cylinders and a comprehensive operational retest report. This opportunity falls under NAICS code 811210 and was posted on October 26, 2026, with a response deadline of November 9, 2026.

Nswc Philadelphia Division

POSTED

about 7 hours ago

DEADLINE

Power Supply Unit Repair and Modification (NSN 6130-01-605-0017)This subcontract involves the technical restoration and modification of a specialized Power Supply Unit (NSN 6130-01-605-0017) for prime contractors supporting Department of the Navy projects. The scope of work includes the complete disassembly of the unit, diagnostic testing, board-level soldering, and the replacement of faulty resistors and capacitors. All work must be performed using electronic diagnostic equipment and ESD-safe workstations to ensure the delivery of one fully repaired and tested unit. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the project falls under NAICS code 811210. Prospective providers must maintain CMMC compliance and provide Buy American Act certification. The response deadline for this opportunity is November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Electro-Mechanical Valve Overhaul and Repair ServicesThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul, upgrade, and repair of Electro-Mechanical Housing Valves, specifically part number 1007720-2. The selected provider will be responsible for evaluating, disassembling, and repairing components in strict accordance with Hamilton Sundstrand Corporation drawings, utilizing specialized jigs, fixtures, and tooling to deliver certified ready-for-issue units. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification and adhere to ANSI/NCSL Z540.3 calibration standards. This project falls under NAICS code 811210 and requires the delivery of fully repaired and certified valve units to support prime contractors on critical weapon systems projects.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

Indicator-Transmitt Repair and Overhaul ServicesThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the repair and overhaul of the Indicator-Transmitt (NSN 6320-00-149-7570) for U.S. Navy component projects. The scope of work includes the teardown, evaluation, repair, and modification of units to ensure they are delivered as certified, operational components. All activities must be executed in accordance with TDP Version 014, specific technical orders, and approved repair standards. The contractor is required to utilize specialized testing equipment and maintain strict compliance with OPNAVINST 5510.1. Additionally, the application of Unique Item Identifiers is mandatory per DFARS 252.211-7003. This opportunity falls under NAICS code 811210, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Positive Clutch Teardown and Repair ServicesThis subcontract, issued by the Department of Defense under Navsup Weapon Systems Support Mech, involves the teardown, evaluation, and repair of Positive Clutch assemblies (NSN 7HH 3010-01-266-6858) for Navy prime contractors. The scope of work includes disassembling the clutch, assessing internal components for wear, and performing modifications to ensure all units align with original manufacturer specifications and TDP Version O04. The service provider must utilize precision measuring tools and disassembly jigs while maintaining strict compliance with DoD Item Unique Identification requirements. The final deliverable is a fully repaired, tested, and certified clutch assembly. This opportunity falls under NAICS code 811210, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Preventative Maintenance and FullCare Service Support for Cytiva Sepax C-PRO Cell Separation Systems

Solicitation # 27-000245

National Institutes Of Health Olao

POSTED

about 7 hours ago

DEADLINE

Preventative Maintenance and Service Support for Miltenyi Biotec CliniMACS Plus Instruments

Solicitation # 27-000190

National Institutes Of Health Olao

POSTED

about 7 hours ago

DEADLINE

Service maintenance on (3) three Dornier Genesis Imaging Systems at the Naval Medical Center San Diego

Solicitation # HT941027N0007

Solicitation HT941027N0007 is a request for quotes from the Defense Health Agency for full service and maintenance of three Dornier Genesis Imaging Systems located at the Naval Medical Center San Diego. The requirement includes both preventive and corrective maintenance, including unscheduled repairs and emergency callouts, to be performed by qualified field engineers trained by the original equipment manufacturer or approved third-party schools. The contractor must maintain an overall equipment uptime rate of 95 percent or better on a rolling six-month basis and ensure that equipment shipments do not exceed two business days. The contract is structured with a base period from November 20, 2026, through November 19, 2027, with three subsequent one-year options extending the total potential duration to November 19, 2030. Qualified sources must be an original equipment manufacturer, authorized dealer, distributor, reseller, or service provider. Performance is subject to ISO standards, Joint Commission requirements, and various DoD cybersecurity and HIPAA privacy regulations. Invoicing is processed through Wide Area Workflow, and the contractor is required to submit completed Field Service Reports to NMCSD Biomed prior to invoice acceptance. Access to the facility requires enrollment in the Defense Biometric Identification System.

Defense Health Agency Hcd West

POSTED

about 7 hours ago

DEADLINE

Preventative Maintenance and Service Support for Thermo Fisher Scientific HERA VIOS 160i CO2 and VIOS 250i CO2 Incubators

Solicitation # 27-000282

National Institutes Of Health Olao

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Health Agency Hcd West

Same awarding agency

Dornier Genesis System Replacement Parts & ConsumablesThis subcontract involves the supply of genuine OEM or approved replacement parts and consumables for the Dornier Genesis system to support prime contractors on Defense Health Agency projects. The primary objective is to provide proprietary components necessary to restore equipment to original manufacturer specifications at the Naval Medical Center San Diego. The contractor is responsible for managing all logistics to ensure that certified replacement materials are delivered to the NMCSD Biomed department within two business days. This requirement falls under NAICS code 423450 and is managed through the Department of Defense for performance in San Diego, California.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Parts Supply and Loaner Equipment Provider for Anatomic PathologyThis small business set-aside subcontract involves providing genuine replacement parts and loaner equipment for anatomic pathology projects at the Naval Medical Center in San Diego. Supporting the Defense Health Agency, the provider will manage inventory for critical laboratory machinery, including cryostats, microtomes, embedding centers, slide stainers, tissue processors, and coverslippers. The selected contractor must be an authorized OEM parts distributor capable of ensuring two-day delivery with shipping terms set as FOB Destination. Key responsibilities include the timely delivery of replacement components and the provision of on-site loaner equipment to maintain operational continuity for prime contractors.

Ophthalmic Goods Merchant Wholesalers

POSTED

DEADLINE

Field Service Engineering for Anatomic Pathology SystemsThis small business set-aside subcontract involves providing field service engineering for anatomic pathology systems at the Naval Medical Center in San Diego for the Defense Health Agency. The scope of work includes performing annual preventive maintenance and corrective repairs on 16 different systems, such as cryostats, microtomes, embedding centers, slide stainers, tissue processors, and coverslippers. The primary objective is to ensure equipment remains operational and to provide detailed maintenance reports. To qualify for this engagement, contractors must maintain CMMC Level 1 compliance and hold OEM certification for specific pathology systems. The project falls under NAICS code 811210 and is managed through the Department of Defense. Interested parties should note the response deadline of November 7, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Repair and Maintenance Service for Histology and Cytology Equipment

Solicitation # PANDHA-26-P-0000047516

The Defense Health Agency is seeking a firm-fixed-price contract for comprehensive repair and preventive maintenance services for 16 government-owned anatomic pathology systems at the Naval Medical Center, San Diego. The equipment includes three cryostats, four microtomes, two embedding centers, three slide stainers, two tissue processors, and two coverslippers. The scope of work requires annual preventive maintenance every December, as well as corrective repairs. The contract is a total small business set-aside under NAICS code 811210, with an initial period of performance from December 15, 2026, to December 14, 2027, and four subsequent option years. Award will be based on the Lowest Price Technically Acceptable (LPTA) offer, with technical acceptability evaluated on a pass/fail basis. To qualify, offerors must provide documentation of OEM certification for their engineers, a response plan meeting a two-hour phone and one-business-day on-site requirement, and evidence of a supply chain ensuring two-day parts delivery and free loaner availability. All pricing must be all-inclusive of labor, parts, travel, and FOB destination shipping. Contractors must maintain an active SAM.gov registration and comply with CMMC Level 1 basic safeguarding requirements for federal contract information.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Medical Administrative Support ServicesThis 8(a) set-aside subcontract for the Defense Health Agency Hcd West involves providing non-clinical administrative management and operational support for medical facilities in Japan and Korea. The primary objective is to deliver qualified administrative staffing for the Medical Administration Support labor segment, specifically requiring personnel with expertise in healthcare administration, patient scheduling, and medical billing. The opportunity is categorized under NAICS code 541611 and was posted on August 26, 2026, with a response deadline of April 19, 2027. This contract is designed to support prime contractors on DHA medical support projects by ensuring efficient administrative oversight and staffing within the specified regions.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Dental Care ProviderThis 8(a) set-aside subcontract through the Defense Health Agency Hcd West involves providing comprehensive dental clinical services for prime contractors on medical support projects located in Japan and Korea. The scope of work includes performing routine dental care, dental examinations, and emergency relief services. The selected provider must supply qualified dental practitioners for the Dental Services labor segment who possess the necessary dental licensure and the capacity to offer emergency relief on a reimbursable basis. This opportunity falls under NAICS code 621210, with a response deadline of April 19, 2027.

Offices of Dentists

POSTED

DEADLINE

Mental Health Professional ServicesThe Mental Health Professional Services subcontract, issued by the Defense Health Agency Hcd West under the Department of Defense, provides psychological and psychiatric care for prime contractors supporting DHA medical projects in Japan and Korea. The scope of work involves delivering clinical mental health services and patient care through the provision of licensed mental health practitioners. This opportunity is an 8(a) set-aside under NAICS code 621330. Qualified personnel must hold valid state or national licensure in psychology or psychiatry and successfully complete background checks via CHBC/CNACI. The response deadline for this requirement is April 19, 2027.

Offices of Mental Health Practitioners (except Physicians)

POSTED

DEADLINE

Nursing Services ProviderThe Nursing Services Provider subcontract, issued by the Defense Health Agency Hcd West under the Department of Defense, focuses on delivering professional nursing care and clinical support for prime contractors operating on medical support projects in Japan and Korea. The primary objective is to provide qualified nursing staff for the Nursing Services labor segment, ensuring all personnel possess the necessary professional nursing licenses and maintain strict compliance with SOFA Article XIV for those stationed overseas. This opportunity is designated as an 8(a) set-aside under NAICS code 621330. The solicitation was posted on August 26, 2026, with a response deadline of April 19, 2027. The contract aims to fulfill critical clinical staffing requirements to support DHA medical operations within the OCONUS regions of Japan and Korea.

Offices of Mental Health Practitioners (except Physicians)

POSTED

DEADLINE

Direct Patient Care StaffingThis 8(a) set-aside subcontract, titled Direct Patient Care Staffing, is issued by the Defense Health Agency Hcd West under the Department of Defense. The contract focuses on providing clinical staffing and various medical practitioners for the Direct Patient Service Providers labor segment to support DHA medical projects located in Japan and Korea. These practitioners will perform general medical services and engage in direct patient interaction, requiring all personnel to hold the necessary medical certifications and licenses. The opportunity is categorized under NAICS code 621111 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of April 19, 2027. This engagement is designed to support prime contractors in delivering essential clinical care and staffing solutions across specified international locations.

Offices of Physicians (except Mental Health Specialists)

POSTED

DEADLINE

OCONUS Medical Q-Coded Services

Solicitation # HT941026R2000

Solicitation HT9410-26-R-2000 is a competitive 8(a) small business set-aside Request for Proposal issued by the Defense Health Agency Healthcare Contracting Division-West. The government intends to award five single-award Indefinite Delivery Indefinite Quantity (IDIQ) contracts to provide OCONUS medical Q-coded services in support of military treatment facilities, specifically within the Indo-Pacific Command regions of Japan and Korea. The scope of work covers five distinct labor segments: direct patient service providers, mental health, nursing services, medical support, and dental services. The resulting contracts will be firm-fixed-price with a five-year ordering period, requiring the contractor to recruit, qualify, and manage both credentialed and non-credentialed healthcare workers. Award decisions will be based on a best-value tradeoff process, prioritizing technical capability and past performance over price. Technical capability is the most important non-price factor, while the small business participation plan is a pass/fail requirement. Offerors must demonstrate quality management capabilities through ISO 9001 or Joint Commission Health Care Staffing Services certification. Key submission requirements include detailed disclosures of corporate relationships in the cover letter and strict adherence to the required period of acceptance to avoid being deemed non-compliant. Personnel must meet minimum qualifications defined in the contract exhibits and comply with DHA credentialing and privileging standards, as well as Status of Forces Agreement requirements for performance in Japan and Korea.

Offices of Physicians (except Mental Health Specialists)

POSTED

DEADLINE

Supply and Delivery of Height-Adjustable Medical TableThis subcontract with the Defense Health Agency Hcd West under the Department of Defense involves the procurement and delivery of one height-adjustable medical table specifically designed for refractive surgery procedures. The equipment must adhere to all applicable military packaging and identification standards to ensure compliance with defense logistics requirements. The contract is categorized under NAICS code 339112 and is designated for performance in the 92106 zip code area. The solicitation was posted on August 13, 2026, and is managed through the System for Award Management.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS