Dry Dock for USCGC VISE

SOURCES SOUGHT NOTICE: DRY DOCK REPAIRS USCGC VISE (WLIC 75305) AND USCG 68A BARGE (68012) This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center Norfolk, VA to identify sources capable of providing the following: DRY DOCK Repairs Specification: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to dry dock repairs to the U.S. Coast Guard Cutter (USCGC) VISE (WLIC 75305) AND USCG 68A BARGE (68012), a 75 Foot Class Inland Construction Tender and Barge. The vessel is home ported in St. Petersburg, FL. All work will be performed at the contractor's facility. This vessel is geographically restricted to no greater than 400 nautical miles one way, or 800 nautical miles round trip from the cutter's homeport of St. Petersburg, FL and no open water transits. Scope of Work: The scope of the acquisition is for the dry dock repairs of the UCGC VISE and USCG 68A BARGE. This work may include, but is not limited to the following ITEMS: Hull Plating (U/W Body), Inspect- Tender Hull Plating (U/W Body), Inspect - Barge Hull Plating (U/W Body), Ultrasonic Testing - Tender Hull Plating (U/W Body), Ultrasonic Testing - Barge Hull and Structural Plating (General) -10.2-Pound Steel, Renew - Tender Hull and Structural Plating (General) -10.2-Pound Steel, Renew - Barge Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Renew - Tender Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Renew - Barge Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Renew - Tender Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Renew - Barge Hull And Structural Plating (General) - 20.5-Pound Steel Plate, Renew - Tender Hull And Structural Plating (General) - 20.5-Pound Steel Plate, Renew - Barge Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Renew - Tender Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Renew - Barge Hull And Structural Plating (General) - Cracked Steel Welds, Repairs - Tender Hull And Structural Plating (General) - Cracked Steel Welds, Repairs - Barge Hull and Structural Plating (General) - Degraded Weld (Steel), Repair - Tender Hull and Structural Plating (General) - Degraded Weld (Steel), Repair - Barge Appendages (U/W), Leak Test - Tender Appendages (U/W), Leak Test - Barge Propulsion Shaft Rope Guards, Inspect and Repair Appendages (U/W) - Internal, Preserve - Tender Appendages (U/W) - Internal, Preserve - Barge Voids (Non-Accessible), Leak Test - Tender Voids (Non-Accessible), Leak Test Voids (Non-Accessible), Internal Surfaces, Preserve Voids (Non-Accessible), Internal Surfaces, Preserve Tanks (MP Fuel Service), Clean and Inspect - Tender Propulsion Shafting; Remove, Inspect, and Reinstall Propulsion Shafting, Straighten Propulsion Shaft Seals, Mechanical & Inflatable, Overhaul and Renew Propulsion Shaft Bearings (External), Check Clearances Propulsion Shaft Bearings (External), Renew Propellers, Remove, Inspect, and Reinstall Propeller, Minor Repairs and Reconditioning, Perform Keel Coolers, Clean, Inspect and Hydro Main Diesel Engine (MDE) Exhaust Piping, Commercial Clean Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean Boiler Exhaust Stack Uptakes, Commercial Clean Barge, Diesel Engine Exhaust Piping, Commercial Clean Fathometer Transducer, Renew - Tender Fathometer Transducer, Renew - Barge Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift - Tender Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift - Barge Rudder Assembly; Remove, Inspect And Reinstall Rudder(s), Preserve ("100%") Spuds, Overhaul - Barge Spud Wells, Preserve - Barge Spud Wells, Inspect - Barge Boat Boom, Inspect and Service - Tender Sewage Holding Tank(s), Clean and Inspect - Tender Decks - Exterior (Buoy or Construction Deck), Preserve 100% U/W Body, Preserve (100%) - Tender U/W Body, Preserve (100%) - Barge U/W Body, Preserve (Partial - Condition A) - Tender U/W Body, Preserve (Partial - Condition A) - Barge U/W Body, Preserve (Partial - Condition B) - Tender U/W Body, Preserve (Partial - Condition B) - Barge Cathodic Protection / Zinc Anodes, Renew - Tender Cathodic Protection / Zinc Anodes, Renew - Barge Dry dock Cutter Dry dock Barge Temporary Services, Provide - Sea Trial Performance, Support, Provide Lead Dust, Clean Lead-Based Paint and Asbestos-Containing Material, Perform Spot Abatement Lead-Based Paint, Perform Spot Abatement Grey Water Piping, Clean and Flush Grey Water Piping, Renew Bulwark and Handrail Sections (Various Locations), Renew Lazarette, 100% Door- Aft Engine Room, Renew Pilot House Top Renew Gooseneck Vent Pipe, Boiler and Piping, Renew Compartment Insulation, Renew Padeye Relocation Barge Trim Tank Propulsion Shaft Bulkhead Seals, Renew Engine Room Ventilation, Repair Line Locker, Preserve All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Anticipated Period of Performance: The period of performance is anticipated to be for fifty (50) calendar days with a start date of 26 September 2017 and end date of 14 November 2017. (Subject to change at the discretion of the Government) Anticipated NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,250 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to contact@example.gov or via fax to +1 (555) 000-0000 (Attn: Timothy Shuhart /CDP-C&P2-IBCT) no later than 5 April 2017 at 01:00PM Eastern Standard Time with the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: Please state which of the following apply to your company: a. 8(a) Small Business Concern; b. HubZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company: a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA. c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: State how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. SAM: (Formally known as CCR). Interested parties should register in the System for Award Management (SAM) as prescribed in FAR Clause 52.232-33. The SAM can be obtained by accessing the internet at www.sam.gov or by calling +1 (555) 000-0000. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.