Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Conduit Reattachment and Structural Support Installation

Active

Federal

Response Deadline09/14/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Department of Transportation involves the reattachment of 60 feet of electrical conduit at the DEN ATCT. The project requires the design, fabrication, and installation of a permanent structural support system, executed through a phased process that includes a site survey, inspection, the creation of a PE-stamped plan, physical reattachment, and final documentation. The contract is designated as a total Small Business Set Aside under NAICS code 238210. Managed by 697DCK Regional Acquisitions Svcs, the work will be performed in the 80249 zip code area. Interested parties must submit their responses by the deadline of September 14, 2026.

General Info

DOT subcontract for electrical conduit reattachment at DEN ATCT, due September 14, 2026.

Agency

Department Of Transportation → 697DCK Regional Acquisitions SvcsView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

CO, 80249, USA

Set-Aside

SBA

Documents

This scope was carved out of 697DCK-26-R-00391.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Reattach Electrical Conduit, Denver Air Traffic Control Tower (DEN ATCT), 9800 Peña Blvd, Denver, CO

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 26

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 09:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Transportation → 697DCK Regional Acquisitions Svcs

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform reattachment of 60 feet of electrical conduit at DEN ATCT, including design, fabrication, and installation of a permanent structural support system. Work includes phased execution: site survey, inspection, PE-stamped plan, physical reattachment, and documentation.

Similar Contracts

Same NAICS industry code

Stair Platform Construction (Steel Fabrication & Erection)

PTSI Managed Services Inc.

POSTED

about 11 hours ago

DEADLINE

ASO-1286-00 Site renovations at the Air Traffic Control Beacon Interrogator (ATCBI) tower at QRB, Samberg, TN

Solicitation # aso-1286-00-site-renovations-air-traffic-control-beacon-interrogator-atcbi-tower-qrb-samberg-tn

This solicitation, managed by PTSI Managed Services, Inc., involves comprehensive site renovations at the Air Traffic Control Beacon Interrogator tower located in Samberg, Tennessee. The scope of work focuses on facility upgrades and structural repairs, including the installation of LED lighting for the interior shelter, tower stairs, and building exterior. Additional requirements include replacing the restroom exhaust fan, a 10x16 storage shed, and the shelter roof, as well as repairing the asphalt parking area and sealing foundation cracks to prevent water intrusion. The project also entails the partial replacement of approximately 750 feet of barbed wire and fence fabric, the relocation of the entrance gate, and the maintenance of tower hardware through the repair or replacement of rusting components. This opportunity is set aside for Small Businesses and Small Disadvantaged Businesses under NAICS code 238210. Interested parties must submit their responses by the deadline of September 25, 2026.

PTSI Managed Services, Inc

POSTED

about 11 hours ago

DEADLINE

MAIN GROUNDING ELECTRODE

Solicitation # WL-26-006

The Woodland Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor, is soliciting a licensed electrical contractor to inspect and repair grounding systems across multiple campus buildings in Laurel, Maryland. The scope of work, identified as WL-26-006, requires corrections at the Aspen Dorm, Vocational Building, Willow Hall, Holly Dorm, Maple Dorm, and Oak Dorm, as well as an inspection of the Administration Building. Technical requirements include the installation of #2/0 awg conductors, 16x2 inch ground bars, 8-foot ground rods with 6-foot separation, and the use of 3/4 inch EMT conduit, all in strict accordance with NEC 2023, 250 standards, OSHA, EPA, and Maryland state regulations. This is a single lump sum contract with proposals due by September 3, 2026. Award decisions will be based on best value, weighted by price (60%), quality (20%), past performance (10%), and schedule (10%). Bidders must provide a detailed cost breakdown, a valid Maryland contractor's license, and proof of comprehensive insurance, including general liability of at least 1 million dollars per occurrence. The selected contractor must start work within 14 days of the Notice to Proceed and provide a one-year workmanship guarantee. Compliance with federal and state wage rate decisions is mandatory, and final payment is contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens from all subcontractors.

Adams & Associates\ Woodland Job Corps Center

POSTED

about 11 hours ago

DEADLINE

FIRE DETECTION EQUIPMENT REPLACEMENT (SMOKE/CO) and Emergency LED

Solicitation # fire-detection-equipment-replacement-smokeco-emergency-led

The Exeter Job Corps Academy is seeking a contractor for the replacement of fire detection and emergency lighting equipment in Rhode Island. The scope of work includes the installation of 23 new system-connected combined smoke and carbon monoxide detectors to replace existing units, the replacement of a Johnson Controls thermostat, and the installation of a new LED dual head self-contained battery pack emergency light. This solicitation is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. Interested parties must submit their responses by September 9, 2026. The project falls under NAICS code 238210 and is managed by primary point of contact Michael Koster.

Exeter Job Corps Academy

POSTED

about 11 hours ago

DEADLINE

Solicitation # WL – 26 -0004

This solicitation, identified as WL-26-0004, is for a single lump sum contract to perform electrical panelboard repairs and labeling at the Woodland Job Corps Center in Laurel, Maryland, operated by Adams and Associates for the U.S. Department of Labor. The scope of work requires the provision of non-handwritten circuit directories for buildings E, F, G, K, and M, the reinstallation of a panelboard cover in the welcome center mechanical room, and specific fire alarm control panel identification at the Oak Dormitory, including UL listed red mark labels and updated panel schedules. All work must comply with NEC 2023, OSHA, EPA, and Maryland state regulations. The performance period is scheduled from May 11, 2026, through December 31, 2026. Proposals are due by September 3, 2026, and must be submitted on company letterhead including a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Maryland contractor's license. Attendance at the mandatory bid conference is required for consideration. Award will be based on best value, weighing technical quality and price. The contractor must provide comprehensive insurance coverage, including general liability of at least 1 million dollars per occurrence, and guarantee all workmanship for one year. Final payment is contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens from all subcontractors and suppliers.

Adams & Associates\ Woodland Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Wind River Job Corps: LAWN EQUIPMENT STORAGE ROOM VENTILATION

Solicitation # wind-river-job-corps-lawn-equipment-storage-room-ventilation

Arbor E & T, LLC dba Equus Workforce Solutions is seeking bids for a subcontracting opportunity to remediate a life safety deficiency at the Wind River Job Corps Center in Riverton, Wyoming. The project involves installing mechanical ventilation in a lawn equipment storage room to mitigate dangerous fuel vapor accumulation. The scope of work includes creating an 18-inch by 18-inch rough opening in an exterior concrete block wall, installing one explosion-proof exhaust fan capable of 600 CFM mounted 15 feet above the floor, and installing two 18-inch by 24-inch door-mounted ventilation louvers. Additionally, the contractor must provide approximately 90 linear feet of conduit and wiring for a 208 volt, 1 phase, 1/3 HP motor designed for continuous operation. All electrical work must adhere to the National Electrical Code, and the contractor must follow Lockout/Tagout procedures and use standard commercial PPE. This is a fee-for-service solicitation open to small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 238210. Bids must be submitted electronically to Hannah Schooner by September 2, 2026, at 2:00 PM MST. Required submission documents include a completed bid sheet, a W-9, a vendor self-certification form, and signed terms and conditions. Award will be based on best value. The contract is subject to the Service Contract Act, requiring compliance with Wage Determination No. 2015-5407 for Wyoming. Subcontractors must maintain specified insurance coverage and provide electronic copies of manufacturer warranties and project manuals upon completion. Final acceptance requires the storage room to be swept clean and all impacted surfaces wiped down.

EQUUS Workforce Solutions operator of the Wind River Job Corps

POSTED

about 11 hours ago

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work and grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for this project is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as a small business set-aside, welcoming bids from Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must submit their responses by the deadline of November 16, 2026. The project falls under NAICS code 238210, and inquiries should be directed to the primary point of contact, Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 11 hours ago

DEADLINE

Electrical Repair Services

Solicitation # Electrical Services 8-2026

Management & Training Corporation, acting on behalf of the U.S. Department of Labor, is soliciting bids for a fixed-price, single lump sum contract to provide various electrical repair services at the Centennial Job Corps Center in Nampa, Idaho. The solicitation is open to small businesses, including SDB, WOSB, HUBZone, and VOSB certified entities. Bids must be submitted via email to Sandra Clore by August 31, 2026, at 3:00pm MST. A pre-bid meeting was scheduled for August 21, 2026. The scope of work includes all electrical services, incidental work required by building codes, and the acquisition of necessary permits. Awardees must provide a one-year written guarantee of workmanship and deliver comprehensive operation and maintenance manuals upon substantial completion. Financial and compliance requirements are stringent, with a mandatory bid bond of 20% and subsequent performance and payment bonds required for bids equal to or exceeding $25,000. The contract is subject to Construction Wage Rate Requirements, necessitating weekly certified payroll and adherence to the provided wage determination for Idaho. Bidders must provide a detailed cost breakout on company letterhead covering labor, materials, equipment, and overhead. Payment is handled through progress payments using AIA G702 and G703 forms, contingent upon the submission of a Schedule of Values. Additionally, contractors must comply with federal security and privacy regulations, including mandatory DOL training and strict data breach liability protocols.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Video Teleconferencing - 139th AW

Solicitation # W50S7G-26-Q-A021

W7NJ Uspfo Activity Moang 139

POSTED

about 15 hours ago

DEADLINE

(ATOC) Upgrades

Solicitation # W911RZ26QA044

The Department of Defense, through the W6QM Micc-Ft Carson office, is seeking a small business contractor for the (ATOC) Upgrades project under solicitation W911RZ26QA044. The contract focuses on enhancing facility infrastructure at Fort Carson, Colorado, specifically by improving electrical supply and increasing the diversity of 120 V and 240 V receptacles to accommodate new equipment such as soldering stations and 3D printers. Additionally, the scope includes the implementation of cost-effective lithium battery storage and the installation of temperature control systems. A critical component of the project involves addressing fume ventilation in the 3D printing and soldering areas to mitigate health and safety risks. This combined synopsis and solicitation is categorized under NAICS code 238210. Interested parties must submit their responses by September 7, 2026, at 4:00 PM.

W6QM Micc-Ft Carson

POSTED

about 15 hours ago

DEADLINE

61--POWER SYSTEM GENERATOR & TRANSFER SWITCHES REPLACE

Solicitation # 89503126QWA000425

The Department of Energy, through the Western Area Power Administration Desert Southwest Region, is soliciting bids for a project to replace power system generators and transfer switches. This combined contract opportunity is specifically designated as a total small business set-aside under NAICS code 238210. The solicitation was posted on August 14, 2026, with a response deadline of August 28, 2026. Managed by the office located in Phoenix, Arizona, the project is overseen by primary point of contact Georgette Flores Reyes-Wiltz.

Western-Desert Southwest Region

POSTED

about 15 hours ago

DEADLINE

Multi-Building Fire Alarm System Retrofit

Solicitation # 70LGLY26RSSB00028

This contract is a 100% Small Business Set-Aside under NAICS Code 238210 for the repair and retrofit of the fire alarm system across multiple buildings at the Federal Law Enforcement Training Center in Glynco, Georgia. The solicitation results in a single Firm Fixed Price contract award, with performance to begin on September 30, 2026, and conclude on July 11, 2028. All work must be performed on-site at the FLETC facility, and contractors are responsible for managing logistics, including equipment movement and repositioning, without government assistance in receiving deliveries. To access controlled documents in SAM, proposers must complete and submit the DHS Non-Disclosure Agreement to the Contracting Officer by the proposal deadline. A mandatory site visit is scheduled for August 6, 2026, at Building 200, requiring all non-badged personnel to submit a Day Pass application by August 4, 2026, coordinated through the Project Manager. Proposals must be submitted electronically by email only to Brett Zeigler, with Volume I containing pricing documentation in Excel and Volume II containing technical experience and past performance submissions as single PDF files. Past performance submissions are limited to four pages total, with each project narrative restricted to one page. The evaluation is a best-value trade-off based equally on Technical Experience, Past Performance, and Price, with no preference for lowest or highest bid. Contractors must comply with stringent operational security, safety, and access protocols, including adherence to OSHA, USACE EM-385-1-1, and FLETC directives. All personnel must undergo background screening, and foreign nationals require additional documentation; failure to meet clearance thresholds may result in cost deductions from final payments. Insurance, warranties, government property management, and changes are governed by applicable FAR clauses, including those for warranty, delays, suspension of work, and termination. The contracting officer retains discretion for award and may conduct discussions with offerors prior to final selection. Final contract administration, including invoicing and payments, will be handled through the FLETC Finance Division, and no contract value has been disclosed due to unpopulated pricing fields in the solicitation.

Fletc Glynco Procurement Office

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

Grounds Maintenance at the Northern California TRACON and Oakland ARTCC

Solicitation # 697DCK-26-R-00332

The Federal Aviation Administration is soliciting proposals for grounds maintenance services at the Northern California TRACON in Mather and the Oakland ARTCC in Fremont under Solicitation Number 697DCK-26-R-00332. This is a small business set-aside contract awarded on a firm-fixed-price basis under NAICS code 561730, with all proposals required to comply with the Statement of Work and evaluation criteria outlined in Sections J and M of the solicitation. Offerors must be registered in SAM.gov by the deadline and are limited to submitting proposals via email to Anna F. Glover no later than 5:00 p.m. Eastern Time on August 31, 2026; late submissions will not be accepted. All communications regarding the solicitation must be conducted via email to the designated contract specialist, with no phone calls permitted. An optional site visit is scheduled for August 18 at the Northern California TRACON and August 19 at the Oakland ARTCC, both at 10:00 a.m. local time, and interested parties must register by 4:00 p.m. Eastern Time on August 17, 2026, with a maximum of two attendees per company. Questions about the solicitation must be submitted in writing via email by 5:00 p.m. Eastern Time on August 19, 2026, and any clarifications or amendments will be posted on SAM.gov. Offerors are responsible for reviewing all attached documents including the SOW, wage determinations, and contractor staffing questionnaire, and are advised that the FAA will not reimburse any costs incurred in preparing or submitting a proposal.

Landscaping Services

POSTED

about 15 hours ago

DEADLINE

Solicitation # 697DCK-26-R-00423

Scientific Research and Development Services

POSTED

about 15 hours ago

DEADLINE

Reattach Electrical Conduit, Denver Air Traffic Control Tower (DEN ATCT), 9800 Peña Blvd, Denver, CO

Solicitation # 697DCK-26-R-00391

The Federal Aviation Administration is soliciting proposals under SIR 697DCK-26-R-00391 to reattach electrical conduit at the Denver Air Traffic Control Tower located at 9800 Peña Blvd, Denver, Colorado. This small business set-aside project has a monetary value of less than 100,000 dollars and a performance period of 65 calendar days from the Notice to Proceed, encompassing five distinct work phases of on-site activity. A site visit is scheduled for September 2, 2026, at 9:30 am, and interested offerors must provide attendee names to Ben Bramley at least two days in advance. All formal inquiries and final offers must be submitted to Linda Hennequant via email, ensuring the SIR number is included in the subject line. The deadline for responses is September 14, 2026. This procurement is governed by the FAA Acquisition Management System rather than the FAR.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 15 hours ago

DEADLINE

QMI ARSR Guardrail Replacement

Solicitation # 697DCK-26-R-00352

The Federal Aviation Administration is solicitating bids for the QMI ARSR Guardrail Replacement project at the Mica Peak Long Range Radar site near Rockford, Washington, under Solicitation Number 697DCK-26-R-00352. This requirement is set aside exclusively for small business concerns under NAICS code 237310, with an estimated project cost between $250,000 and $500,000 and a projected performance period of approximately 60 calendar days. The contractor will be responsible for all labor, materials, equipment, and supervision needed to demolish and install a new guardrail along the access road at the site, under a Firm Fixed Price Contract. Key dates have been amended to extend the Site Visit to August 19, 2026, at 10:00 a.m. PST; the RFI due date to August 24, 2026, at 2:00 p.m. EST; and the Proposal due date to August 31, 2026, at 3:00 p.m. EST. All other terms remain unchanged. Attendance at the single, mandatory site visit requires advance notification and will be canceled if no responses are received by July 31, 2026. Proposals must be submitted electronically via email in Word or PDF format, not exceeding 10MB per message, and must include both technical and cost proposals as outlined in the SIR. Bidders must be currently registered in SAM, and late or incomplete submissions will be rejected. No telephone inquiries will be accepted, and all communications must be in writing through the designated contracting officers. The FAA reserves the right to make further amendments without individual notification, and it is the offeror’s responsibility to monitor the solicitation for updates.

Highway, Street, and Bridge Construction

POSTED

about 15 hours ago

DEADLINE

Confined Space Entry and Safety SupportThis subcontract opportunity, issued by the Department of Transportation under the 697DCK Regional Acquisitions Svcs, seeks a provider to deliver OSHA-compliant confined space safety support. The scope of work focuses on the Cable Access and Junction Level crawl space, requiring the contractor to provide essential safety services including rescue planning, attendant services, and strict protocol enforcement to ensure worker safety. The project is designated as a total Small Business Set Aside under NAICS code 541620 and will be performed in the 80249 zip code area. Interested parties must submit their responses by the deadline of September 14, 2026.

Environmental Consulting Services

POSTED

DEADLINE

Professional Engineering for Structural Support DesignThis subcontract opportunity, issued by the Department of Transportation through 697DCK Regional Acquisitions Svcs, requires professional engineering services for the design of a conduit support system. The selected contractor must provide comprehensive structural design deliverables, including detailed weight calculations, specifications for struts and fasteners, and specific anchorage details. A critical requirement of the project is the delivery of a PE-stamped design that adheres to a 2:1 safety factor. The project is designated as a total Small Business Set Aside under NAICS code 541330 and will be performed in the 80249 zip code area. Interested parties must submit their responses by the deadline of September 14, 2026.

Engineering Services

POSTED

DEADLINE

Elevator Modernization, Salt Lake City Airport Air Traffic Control Tower (SLC ATCT) Salt Lake City, UT,

Solicitation # MK-WS-26-00703

The Federal Aviation Administration is conducting a market survey to identify capable sources for the modernization of elevators at the Salt Lake City Airport Air Traffic Control Tower in Utah. The project involves a professional assessment and subsequent modernization of two elevators: a gear traction elevator serving 23 levels of the 328-foot tower and a hydraulic elevator serving the first and second floors of the base building. The primary objective is to bring both systems up to the most recent ASME A17.1 safety codes to reduce frequent outages and maximize the life expectancy of the equipment. The scope includes the replacement of major components, integration with fire alarm and communication systems, and adherence to specific electrical and grounding requirements. This is a request for information and not a formal solicitation for proposals. The anticipated period of performance is 180 calendar days, with an estimated price range between 1,000,000 and 5,000,000 dollars. Interested vendors must submit a capability statement including past performance on similar projects, business size status, and their Unique Entity Identifier. The FAA will use the responses to determine if the requirement should be set aside for small businesses, service-disabled veteran-owned small businesses, or 8(a) certified firms, or if it will be conducted as a full and open competition.

Other Building Equipment Contractors

POSTED

DEADLINE

Weed Control Services for Arizona, Oklahoma, Texas, and New Mexico

Solicitation # 697DCK-26-R-00278

The contract solicits weed control services for FAA-owned or leased properties in Albuquerque, Roswell, El Paso, and Amarillo, requiring a small business contractor to provide all labor, equipment, materials, and chemicals necessary for soil sterilization and contact killing of weeds. Work must be performed between 7 a.m. and 5 p.m., with daily coordination required with the FAA Point of Contact for scheduling and approval, and may be suspended due to weather conditions that threaten adjacent agricultural land or livestock. Access to Kirtland Air Force Base, where the Albuquerque ATCT is located, mandates that all contractor personnel pass a U.S. Air Force background check and be escorted by FAA staff at all times. The contractor is responsible for ensuring all herbicides are applied per manufacturer guidelines, EPA regulations, and state standards in New Mexico and Texas, using only licensed applicators equipped with properly maintained and decontaminated protective gear as required by OSHA. Any damage to FAA property or infrastructure must be restored at no cost to the government, and all tools, surplus materials, and debris must be removed and properly disposed of upon completion, with final approval contingent on FAA POC inspection. Follow-up treatments are required at no additional charge if initial sterilization is ineffective. All records must comply with state regulatory requirements, and no contractor-owned materials may be stored on government property without written POC approval. While the solicitation number is 697DCK-26-R-00278 and the response deadline is May 22, 2026, no contract value, pricing data, delivery schedule, or formal contract type is specified, and the solicitation is designated as a total small business set-aside under NAICS code 56173.

Landscaping Services

POSTED

DEADLINE

Minot Air Traffic Control Tower (ATCT) and System Support Unit (SSU) Janitorial Services, ND

Solicitation # 697DCK-26-R-00174

Janitorial Services

POSTED

DEADLINE

Water Treatment Services at ZMP ARTCC in Farmington, MN

Solicitation # 697DCK-26-R-00373

The Federal Aviation Administration is soliciting proposals for a firm-fixed price contract to provide comprehensive water treatment services at the Minneapolis Air Route Traffic Control Center (ZMP ARTCC) in Farmington, Minnesota. This total small business set-aside procurement, under NAICS code 221310, requires a service-oriented program to maintain boiler systems, cooling towers, heating water circulating systems, and chilled water systems. The primary objectives are to improve heat transfer efficiency by minimizing scale, corrosion, and microbiological growth, thereby reducing fuel and electrical consumption and minimizing equipment maintenance costs. The contract consists of a base year running from October 1, 2026, to September 30, 2027, with four subsequent option years extending the performance period through September 30, 2031. Award will be based on the Lowest Priced Technically Acceptable (LPTA) source selection process. To be deemed technically acceptable, offerors must provide a list of at least three successful contracts from the past five years of similar size and scope, along with three completed customer satisfaction surveys. Additionally, the contractor must maintain a valid ISO 9001:2015 certification in Quality Assurance. Key requirements include the ability to transport chemical containers up or down three flights of stairs, adherence to strict hazardous materials labeling and safety data sheet standards, and compliance with FAA cybersecurity and PIV card authentication policies. Proposals must be submitted electronically to the designated contract specialist by 5:00 pm Eastern Time on September 2, 2026.

Water Supply and Irrigation Systems

POSTED

DEADLINE

Screening Information Request (SIR) for the Strategic Sourcing for the Acquisition of Various Supplies and Equipment (SAVES)

Solicitation # 697DCK-25-R-00302

The Federal Aviation Administration (FAA) is conducting a strategic sourcing procurement under SIR 697DCK-25-R-00302, known as SAVES, to competitively award up to eight multiple-award Indefinite Delivery Indefinite Quantity (IDIQ) contracts for commercial off-the-shelf IT hardware, software, and related lifecycle services. The contract covers a broad range of products including servers, switches, storage, workstations, laptops, tablets, audio/visual equipment, printers, cloud services, and supporting product-based services such as asset recovery, warehousing, deployment, and maintenance. The procurement is DOT-wide and administered by the FAA’s Office of Finance and Management, with awards to be made using a Lowest Price Technically Acceptable (LPTA) approach, split into two pools: up to six awards reserved for small businesses meeting the 150-employee size standard under NAICS code 541519e, and up to two unrestricted awards. All offerors must have an active SAM registration by the proposal deadline. The solicitation requires detailed technical compliance, including ISO 9001 certification and authenticated OEM authorization letters, with eligibility determined by a pass/fail technical evaluation—failure in any technical subfactor results in rejection regardless of price. Pricing is submitted via government-furnished templates in Volume III and evaluated for reasonableness, not competitiveness against technical merit. Proposal submission is restricted to electronic formats divided into three required volumes: Volume I (Business Proposal) containing the Schedule B CLIN/OEM list, Volume II (Technical and Past Experience) including certifications, past performance narratives and questionnaires, and Volume III (Cost/Price) using approved Excel templates. All documents must adhere to strict formatting rules, including Times New Roman 11-point font for narratives, PDF or Word 2019+ for most files, and Excel 2019+ for pricing models, with no password protection or hidden formulas permitted. The most recent proposal deadline is August 12, 2026, at 1700 ET, following multiple amendments that extended the date from the original September 18, 2025, deadline due to solicitation revisions and government delays. Attachments including the SOW, OEM authorization matrices for small and unrestricted pools, past performance forms, and schedule B CLIN lists have been corrected multiple times, with final revisions posted in Amendment 0010. Packaging and delivery must

Other Computer Related Services

POSTED

DEADLINE

in about 18 hours

Equipment and Tool Provision for Janitorial Operations

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE