Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electrical Installation and Wiring Services

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
26-140 Installation of Emergency Shut Off Switches
Solicitation # 26-140
Solicitation 26-140 is a subcontracting opportunity with Atterbury Job Corps Center and Adams & Associates, Inc., operating for the U.S. Department of Labor. The project requires the installation of emergency shut-off switches on power tools within the Facility Engineering Storage/Maintenance Shop in Edinburgh, Indiana. Specifically, the contractor must provide two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel featuring a 60A shunt-trip main circuit breaker and adequate branch breakers for all existing rotating equipment and tool outlets. All work must adhere to FNC guidelines, current OSHA and EPA regulations, and applicable Indiana state and local building codes. The procurement is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Bidders must submit a single lump sum contract bid with a detailed cost breakdown, a timeline for substantial completion, and a minimum 90-day bid guarantee by November 20, 2026, following a mandatory site visit on November 10, 2026. Award will be based on best value, with evaluation weights assigned to price (60), quality (20), past performance (10), and schedule (10). Required documentation includes a completed SF 1413, W9, Vendor Questionnaire, proof of a valid Indiana Contractor's License, and certification of compliance with Davis-Bacon Act wage rates. Contractors must maintain specific insurance coverages, including General Liability of at least $1,000,000 per occurrence and Automobile Liability of $500,000 per occurrence, naming both Adams and Associates, Inc. and Atterbury Job Corps Center as additional insureds. Performance is subject to a one-year workmanship guarantee starting from the date of substantial completion. Payment terms are Net 30. Final payment is contingent upon the delivery of certified payroll records, release of liens from all subcontractors and suppliers, and a final acceptance inspection.
Atterbury Job Corps. – Adams & Associates

POSTED

about 2 hours ago

DEADLINE

in 16 days
NAICS: 238210
New
Transformer Oil Testing Services
Solicitation # RFP-VC-26-010
The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary focus areas: conducting visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to allow for safe oil collection, and performing detailed oil testing analysis. Additionally, the selected contractor must evaluate existing nitrogen blanket systems to ensure positive pressure is maintained, develop standard operating procedures, and provide on-site training for agency staff on inspection tools and defect identification. This is a fixed-price contract with a not-to-exceed ceiling, intended as a single award to the most capable and cost-effective offeror, though the agency reserves the right to make multiple awards. Proposals are due by December 23, 2026, via the PlanetBids portal. Evaluation criteria include the offeror's experience with similar utility or industrial projects, proposed staffing and methodology, personnel availability, and the project fee structure. Technical requirements mandate adherence to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards, with thermography technicians requiring ASNT Level 1 certification or higher. Contractors must comply with strict labor regulations, including registration with the Department of Industrial Relations for public works and adherence to all California Labor Code provisions. Required submittals include a detailed company profile, a project approach covering safety and cybersecurity measures, and various certifications such as non-collusion statements and workers' compensation certificates. Payment will be processed electronically via ACH within 30 days of invoice approval by the project manager. All project documentation and data generated during the contract remain the confidential property of the agency.
Inland Empire Utilities Agency

POSTED

about 2 hours ago

DEADLINE

in about 2 months
NAICS: 238210
New
Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility
Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2
Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Eastern Municipal Water District's Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility Project in California. The scope of work is divided between the San Jacinto Valley Advanced Water Purification Facility and the Brine Ponds, specifically requesting subcontractors for low voltage systems, fiber optics, and electrical materials and supply. Bids must be submitted by 2:00 PM on November 18th, with a final deadline of November 19th, 2026. Quotes should be sent to Ryan Falk, and project documents can be obtained through Amy Roller. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and must adhere to the AGC Master Labor Agreements and the prime contract's terms and conditions. Minimum insurance requirements include 1 million dollars for General Liability per occurrence, 2 million dollars for General Liability aggregate and completed operations, 5 million dollars for Excess Liability, 1 million dollars for Auto Liability, and 1 million dollars for Workers Compensation and Employer Liability. Evaluation will be based on SBE/DBE participation, responsiveness to deadlines, and insurance compliance.
Axia Electric

POSTED

about 2 hours ago

DEADLINE

in 15 days
NAICS: 238210
New
Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services
Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services
Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project, with an estimated value between $25,000 and $100,000, requires a qualified electrical contractor to inventory, functionally test, repair, and certify emergency lighting systems in compliance with NFPA 101 (2024 Edition), NFPA 70, and OSHA standards. Key deliverables include the application of durable tracking labels to fixtures, integration of maintenance requirements into the facility's Computerized Maintenance Management System, and the provision of operation and maintenance manuals and warranties upon completion. The work must be completed within 30 business days following a written Notice to Proceed. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a detailed cost breakout on company letterhead, and a bid bond guarantee of 20% for bids equal to or exceeding $25,000. Awarded contractors with bids of $25,000 or more must also provide performance and payment bonds from a surety with at least an A- rating. This solicitation is set aside for small businesses and various SBA-certified categories. Compliance with Federal Contractor Minimum Wage requirements, Construction Wage Rate Requirements, and various FAR clauses regarding safety, overtime, and domestic sourcing is mandatory.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 28 days
NAICS: 238210
New
SLED
2026 LED Lighting Retrofit DeSoto Parish Sports Complex
Solicitation # 49451
The 2026 LED Lighting Retrofit for the DeSoto Parish Police Jury Grand Cane Sports Complex in Louisiana is a public works project focused on upgrading exterior sports lighting. The scope of work requires the contractor to remove and demolish existing pole lights and arms while retaining circuits for reuse, and subsequently install new sports lighting fixtures and arms on existing poles. All work must adhere to the most recent National Electrical Code and ANSI/IES RP-6 Recommended Illuminance Criteria for Sports and Recreational Areas. The project has an estimated engineer's opinion of probable construction cost of 415,000 dollars. Bids are due by 10:00 am on November 6, 2026, and must be submitted via sealed or electronic means through BidExpress. Eligibility is contingent upon attendance at a mandatory pre-bid conference held on October 27, 2026, and the submission of a Non-Criminal Background Affidavit. Bidders must be licensed under LA R.S.37 and provide bid security equal to five percent of the total bid. The award is expected to be based on the lowest responsive bidder. Technical requirements for the lighting manufacturer include at least 10 years of experience in sports lighting and a proven track record of 10 local LED installations within Louisiana. Contract administration is governed by EJCDC standard general conditions. The successful contractor must provide performance and payment bonds and an insurance certificate within ten days of the Notice of Award. Progress payments will be made monthly based on a Schedule of Values, subject to review and recommendation by the Engineer. Quality standards mandate that all equipment be new, with specific labeling requirements including Arial font and UV-rated materials for outdoor plastic components. Final acceptance of the work is subject to the approval of the Owner's Representative.
DeSoto Parish Police Jury

POSTED

about 2 hours ago

DEADLINE

in 3 days

AI Contract Overview

Show more

The contract entails the installation, maintenance, and repair of electrical systems encompassing wiring, conduits, and distribution components across Alberta and Quebec, excluding the National Capital Region. It is issued as a subcontract under the NAICS code 238210 by the Department of National Defence, Government of Canada, with a posted date of June 18, 2026, and a response deadline of July 29, 2026. Work must be performed within the specified geographic regions, and all services are expected to meet the technical and safety standards required for government infrastructure. No set-aside provisions or organization type restrictions are specified, and while the point of contact information is not provided, interested parties can access further details via the official tender portal linked in the contract data.

General Info

Electrical installation and repair in Alberta and Quebec under DND subcontract, excluding National Capital Region.

Documents

This scope was carved out of W8486-260441.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SMP trailer – MKT spare parts for trailer

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation, maintenance, and repair of electrical systems including wiring, conduits, and electrical distribution components.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 335999
New
International
Uninterruptible Power Supplies
Solicitation # W2037-26-0052/A
The Department of National Defence is soliciting offers for the procurement of six Uninterruptible Power Supply (UPS) units and four compatible faulty circuit boards for instructional use at the Canadian Forces School of Military Engineering in Oromocto, New Brunswick. The solicitation, file number W2037-26-0052/A, closes on November 3, 2026, with a required delivery date of March 31, 2027. The requirement includes a preference for Canadian goods and services and mandates that all equipment be new and conform to the latest specifications. Technical requirements for the UPS units include an AC input and output of 120/208VAC, 3 Phase 4 Wire plus ground at 60Hz, a capacity range between 25kVA and 50kVA, and a 12VDC voltage. The systems must be modular and scalable to allow for external battery cabinets and feature forced air, variable speed cooling. An amendment clarified that test units require a load of less than 5kVA with a backup time of 5 to 10 minutes. Bidders must provide detailed documentation to prove compliance with these mandatory criteria, as simple statements of compliance will not be accepted. The contract stipulates strict adherence to environmentally preferable packaging, requiring materials to be reusable, returnable, or recyclable in accordance with the Policy on Green Procurement. Delivery is specified as FOB Destination, Delivery Duty Paid. Offerors must submit an Offer Submission Form and an Offeror Declaration Form, certifying compliance with the Ineligibility and Suspension Policy and anti-forced labour regulations. Invoices must be detailed and submitted to the contracting authority, Aaron Pound, for payment via direct deposit.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details
New
International
LOSV Guide
Solicitation # W2037-27-0482/A
The Department of National Defence, through the Canadian Army Advanced Warfare Centre, is soliciting offers for civilian-led Light Over Snow Vehicle (LOSV) training to support the Military Ski Specialist and Advanced Mountain Operations courses. The contract period is scheduled from January 21, 2027, to February 27, 2027. The successful contractor must provide technical expertise, qualified guides, and mountain-type snowmobiles that are no older than five years. Mandatory requirements for guides include at least 10 years of backcountry snowmobiling experience and valid Avalanche Skills Training 1 certification. Additionally, the contractor must provide CSA-compliant safety helmets and ensure the training area is either privately owned or covered by a Land Use Agreement. Award will be based on the lowest evaluated price among compliant offers, with all pricing submitted in Canadian dollars on a Delivery Duty Paid basis. The scope includes providing guide services and safety equipment rentals for up to 28 users per day. Contractors are required to maintain a valid Agreement to Implement Employment Equity and adhere to environmentally preferable packaging standards, utilizing reusable, returnable, or recyclable materials. While the contractor provides technical expertise, military standards take precedence in the event of conflicting safety opinions, and military instructors retain overall responsibility for course conduct and content.

POSTED

about 11 hours ago

DEADLINE

in 13 days
View Details
New
International
High-Voltage Protective Flooring System
Solicitation # W2037-26-0216/A
The Department of National Defence is soliciting the supply and installation of a high-voltage protective flooring system for the Electric Vehicle training room at the RCEME School, CFB Borden, Ontario. The system must measure approximately 37 by 17 feet and consists of a three-layer design: a top layer of anti-fatigue ESD flooring tiles compliant with ANSI/ESD S7.1 with a minimum tensile strength of 1170 PSI, a perforated middle layer for ventilation and moisture dissipation, and a bottom layer of Class 1 fire-resistant insulating rubber matting meeting or exceeding ASTM D178 Class 2 standards. Required safety features include yellow safety edging with a 5 degree sloped profile around the perimeter and a yellow median safety line between 6 and 12 inches wide to divide the workspace. The contract is subject to a preference for Canadian goods and services and will be awarded based on the lowest evaluated price meeting all mandatory technical criteria. Deliverables must be provided Delivered Duty Paid (DDP) to CFB Borden, with the contract remaining in effect until March 31, 2029. The successful contractor must provide bilingual operator and installation manuals and adhere to environmentally preferable packaging specifications, utilizing reusable, returnable, or recyclable materials. Payment for undisputed invoices will be issued within 30 days of receipt. Additionally, the contractor must certify compliance with the procurement Code of Conduct and guarantee that no forced labour was used in the production of the work.

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423910
New
International
Diving Equipment, Breathing Apparatus Components and Associated Accessories
Solicitation # W8482-275566/A
The Department of National Defence has issued solicitation W8482-275566/A for the procurement of miscellaneous diving equipment and breathing apparatus components for FDU class ships. The requirement consists of twelve line items, including elastic straps from AquaLung USA, diver knives from XS Scuba Inc and Poseidon Diving Systems AB, and swim fins from AquaLung USA, U S Divers Co, and Apeks Marine Equipment Ltd. These items are to be delivered to CFB 12 Wing Shearwater and CFB Esquimalt. The contract will be awarded based on the lowest evaluated price on an item-by-item basis, and multiple contracts may be awarded to different suppliers. The contractor must adhere to strict packaging and marking standards based on their location, utilizing MIL-STD-2073 for US-based, D-LM-008-001/SF-001 for Canadian-based, and TL8100-0100 for EU-based providers. Key deliverables include a Certificate of Conformity per NATO STANAG 4107 and a DD Form 250 or equivalent release document. All items must be bar-coded using UCC/EAN-128 symbology. For hazardous materials, contractors must provide bilingual Safety Data Sheets and comply with the Transportation of Dangerous Goods Act and the Hazardous Products Act. Payment will be made within 30 days of receiving an acceptable invoice, with specific remit-to instructions for Maritime Forces Atlantic and CFB Esquimalt.
Sporting and Recreational Goods and Supplies Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

in 16 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS