Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Emergency Generator Preventive Maintenance & Testing

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive preventive maintenance, load testing, and operational inspections for emergency generators to ensure compliance with NFPA 110 standards and manufacturer specifications. All work must be performed systematically according to established protocols to maintain reliability and readiness of critical backup power systems. The scope emphasizes routine servicing, performance validation under load, and thorough operational checks to meet federal safety and operational benchmarks. The solicitation is classified as a subcontract under NAICS code 811310, issued by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21. Performance is expected at the Mather location, with proposals due by August 12, 2026. The contract does not specify set-aside status or point of contact details, and while the agency’s office address is incomplete, the place of performance is clearly identified. Interested parties must respond by the deadline to be considered for award.

General Info

Preventive maintenance and load testing for emergency generators at Mather, due August 12, 2026, per NFPA 110 standards.

Agency

Department Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)View Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Mather, CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform scheduled preventive maintenance, load testing, and operational inspections on emergency generators in compliance with NFPA 110 and manufacturer standards.

Similar Contracts

Same NAICS industry code

On-Site Installation and Integration ServicesThe contract requires the physical installation, calibration, and commissioning of an LED video wall at NASA’s facility in Huntsville, Alabama, encompassing structural mounting, power supply connections, and signal connectivity to ensure full operational functionality. All work must be performed on-site and includes the integration of the video wall into existing infrastructure, with strict adherence to technical specifications and safety standards required by NASA. The effort demands specialized expertise in large-scale display systems, precise alignment procedures, and system testing to guarantee optimal visual performance and reliability in a mission-critical environment. This is a subcontract set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, with the NAICS code 811310 indicating it pertains to electronic and other repair and maintenance services. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026, at 8:00 PM Eastern Time. The contracting activity falls under the NASA Shared Services Center, part of the National Aeronautics and Space Administration, and the successful bidder must be prepared to meet all contractual obligations at the designated location without deviation, ensuring compliance with federal procurement requirements and any applicable security protocols.

NASA Shared Services Center

POSTED

about 12 hours ago

DEADLINE

SOLE SOURCE – TTE REPAIR OF INOD BLK IIIThe U.S. Navy’s Naval Surface Warfare Center Crane is soliciting sole source services for Test, Teardown, and Evaluation (TTE) of two Improved Night/Day Observation Device (INOD) Block III night vision units, identified by serial numbers 01216 and 01222, with an option for subsequent repairs. The contract is issued under FAR 12.201-1 using simplified acquisition procedures as a firm-fixed-price request for quotes, with response deadline set for 11:00 PM Eastern Time on August 7, 2026. Due to proprietary design, data, and manufacturing rights held by the original equipment manufacturer, Leonardo DRS LLC, and its division DRS Network & Imaging Systems LLC, the Government is restricted to this single source. Any attempt to use an alternative provider would require over five years of engineering effort and more than $10 million in costs for qualification, testing, logistics, and legal work, with no reasonable chance of recouping those investments through competition. All offerors must be registered in SAM.gov, and responses must be submitted electronically to the designated Navy email address by the closing date. No set-aside applies, and the North American Industry Classification System code is 811310. Amendments to the solicitation will only be posted on SAM.gov, and vendors are responsible for monitoring the site. Only those who submit quotes will receive post-deadline updates and be considered for award.

POSTED

about 12 hours ago

DEADLINE

USCG BASE MIAMI BEACH AIR COMPRESSOR MAINTENANCE SERVICEThis solicitation is a firm-fixed-price services contract for annual preventive maintenance of air compressors at USCG Base Miami Beach, Florida, exclusively open to small businesses under a total small business set-aside. The contract has a base year running from August 17, 2026, to August 16, 2027, with two optional one-year extensions through August 16, 2029. The work requires two preventive maintenance visits per year for each piece of equipment—one minor and one major service—and vendors must provide clear pricing for both the routine services and any emergency call-out charges not included in the base fee. All proposals must be submitted electronically by 8:00 a.m. Eastern Time on August 11, 2026, to alera.d.jowers@uscg.mil, and must include the vendor’s UEI and CAGE number with an active SAM registration. The evaluation will prioritize technical acceptability of the offer against the statement of work and award to the lowest-priced responsive offer. The contract incorporates FAR and HSAR clauses addressing service options, funding availability, equal opportunity, and prohibition of contracts with corporate expatriates. Invoices must be submitted monthly in arrears via the Invoice Processing Platform (IPP), and performance is expected to begin within five days of award. A mandatory site visit is scheduled for August 3, 2026, from 9:00 a.m. to 12:00 p.m., and all questions must be submitted by close of business on August 5, 2026. The NAICS code for this effort is 811310, with the small business size standard set at $12.5 million in annual revenue, and wage determinations are governed by 2015-4543, Rev 35 effective May 14, 2026.

Base MIAMI(00028)

POSTED

about 12 hours ago

DEADLINE

Blast System Maintenance/PartsThis solicitation, numbered 70Z03826QK0000012, is a Request for Quotation for maintenance and spare parts support for the Pauli Blast System, specifically the RAM 11 and RAM 35B models, located at the U.S. Coast Guard Aviation Logistics Center in Elizabeth City, North Carolina. The requirement is set for a firm-fixed price purchase order and will be awarded on a sole source basis due to the specialized nature of the equipment, with Pauli Systems Inc. designated as the sole Original Equipment Manufacturer. Only the OEM or its authorized repair facilities are eligible to respond, and a redacted justification for other-than-full-and-open competition is included with the solicitation. All quotations must adhere to the format specified in Attachment 1, the Schedule, and must come from responsible sources capable of meeting the technical and procedural demands outlined in the Statement of Work and Terms and Conditions. Contractors must provide a Certificate of Conformance in the exact format required by FAR 52.246-15, including full traceability to the manufacturer, the manufacturer’s own Certificate of Conformance, and their own compliance documentation. An Equipment Operability Certification confirming the system’s readiness for immediate use is also mandatory. No technical drawings, specifications, or schematics are available from the agency, placing full responsibility on the offeror to understand the system’s requirements through authorized channels. The solicitation is unrestricted, with a NAICS code of 811310 and a small business size standard of $12.5 million, but only authorized repair entities may qualify. Offers must be submitted by 2:00 p.m. Eastern Time on August 30, 2026, with email submission to Samuel.J.Ownley2@uscg.mil and the solicitation number in the subject line being preferred. Award is anticipated for August 14, 2026.

Aviation Logistics Center (ALC)(00038)

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Ice Machine Maintenance Services in Support of Naval Hospital BeaufortThe Defense Health Agency is seeking a firm-fixed-price contract for ice machine maintenance services at Naval Hospital Beaufort and associated facilities in South Carolina, including MCAS Beaufort and MCRD Parris Island. This is a 100% Total Small Business Set-Aside under FAR 6.102-2, restricted to small businesses with a size standard of $12.5 million in annual receipts, using the NAICS code 811310 for commercial and industrial machinery repair and maintenance. The contract will cover the scheduled and unscheduled maintenance, corrective, and emergency repair of seven medical-grade ice machines across the three locations, with all work required to meet OEM specifications and comply with Joint Commission, NFPA, OSHA, and EPA standards. Contractors must provide all personnel, equipment, tools, vehicles, materials, and supervision necessary to perform services safely and efficiently on-site. The base performance period runs from September 1, 2026, to August 31, 2027, with four optional one-year periods extending through August 31, 2031, and an additional six-month extension option available through February 29, 2032 under FAR 52.217-8. The government will award without discussions but reserves the right to conduct them, and offerors must submit their best offer upfront. Proposals must include a detailed technical capability approach and a separate, firm-fixed-price quotation for each CLIN, with prices held firm for 90 days after the submission deadline. Contract financing is not authorized, and payment will be processed electronically through DFAS using WAWF, requiring submission via Invoice 2IN1 or equivalent forms. Successful offerors must be registered in SAM, comply with all reporting obligations under FAR clauses 52.204-7, 52.204-10, and 52.204-13, and adhere to strict security protocols, including obtaining required base passes, protecting protected government information, and ensuring personnel comply with hazard communication and PPE requirements. Technical capability is the primary evaluation factor and is significantly more important than price; proposals deemed technically unacceptable will be disqualified regardless of pricing. All submissions must be sent via email to the designated points of contact, formatted in unencrypted Word, Excel, or searchable PDF files, with required cover pages including CAGE code, UEI, and point of contact information.

Defense Health Agency

POSTED

about 12 hours ago

DEADLINE

Fort Sill Fire Extinguishers BPAThe Mission and Installation Contracting Command at Fort Sill, Oklahoma, is seeking to establish a seven-year Blanket Purchase Agreement for fire extinguisher maintenance, inspection, and servicing to be utilized by Brigades and Major Army Commands stationed at the installation. The government intends to select up to three qualified vendors, all of which must be located within the state of Oklahoma, to provide monthly and annual inspections as well as six-year and twelve-year maintenance evaluations, ensuring fire extinguishers remain operational, safe, and compliant with required standards. Services include thorough examinations to detect damage, determine the need for repair or replacement, and conduct hydrostatic testing or internal maintenance as necessary. All work will be performed upon call-out by authorized government personnel holding a Government Purchase Card, and vendors must be capable of accepting payment via this method. Responses to this sources sought notice must include the company’s full details, such as name, address, point of contact with email, Federal Tax Identification Number, UEI and CAGE code from SAM, proof of ability to accept government credit card payments, and size classification including any applicable certifications like small business, HUBZone, 8(a), or veteran-owned status, along with a capability statement demonstrating relevant experience. Prime contractors are required to be based in Oklahoma, and while no formal set-aside is being used, the government reserves the right to limit award to only three vendors based on responses received. This notice is strictly for market research and does not constitute a solicitation or obligation to award a contract; submissions are voluntary and unpaid. The deadline for responses is August 12, 2026, and the NAICS code for this acquisition is 811310 with a size standard of $12.5 million in annual revenue. Questions should be directed to the designated contracting officer or contract specialist provided.

W6QM Micc-Ft Sill

POSTED

about 12 hours ago

DEADLINE

BAGHOUSE PRVENTIVE MAINTANCEThe U.S. Navy’s Naval Surface Warfare Center Crane is seeking qualified small businesses to perform quarterly preventive maintenance and inspections on baghouse dust collectors located in Buildings 365 and 366 at its Crane, Indiana facility. This requirement is set aside entirely for small businesses under NAICS code 811310, with offers due by 4:00 PM Eastern Time on August 3, 2026. Proposals must be submitted electronically to marty.avin2.civ@us.navy.mil, and all contractors must be active in the System for Award Management. A minimum CMMC Level 2 self-assessment is required for award consideration. The base contract includes separate line items for services at each building, with options to extend the work for up to five years, including four additional one-year options for each building. All amendments to the solicitation will be posted on sam.gov, and it is the offeror’s responsibility to monitor the site for updates. Any changes issued after the closing date will only be provided to those who submitted a quote.

POSTED

about 12 hours ago

DEADLINE

36C25026Q0704 - EMS Equipment Maintenance - Preventative Maintenance and Support - RFQ AmendmentThis solicitation, identified as 36C25026Q0704, is a total small business set-aside for commercial items under FAR subpart 12.6, targeting maintenance and support services for floor cleaning equipment at the Chalmers P. Wylie Ambulatory Care Center in Columbus, Ohio. The procurement is strictly reserved for small businesses as defined by the NAICS code 811310 with a size standard of $12.5 million in annual revenue, and offers are evaluated under a trade-off methodology that considers price along with technical capability, past performance, administrative completeness, and veteran involvement, rather than being limited to the lowest technically acceptable bid. The contract will be awarded as a firm fixed price agreement with a base period of one year starting August 15, 2026, and up to four one-year option periods extending through August 14, 2031, subject to government notification and funding availability. Contractors must comply with extensive procedural and administrative requirements, including submission of proposals via email in five distinct PDF volumes—administrative, technical, price, past performance, and veterans involvement—with a cumulative size not exceeding 30 megabytes. Responses must include the SF 1449 form with a valid SAM UEI, proper small business representations, and affirmations regarding socioeconomic status, including possible claims for service-disabled veteran-owned or veteran-owned status, which trigger additional documentation. Equipment to be serviced is listed by unique identifiers, and service delivery must adhere to strict performance standards: emergency repairs within 24 hours and non-emergency repairs within five workdays, with service reports submitted within 48 hours. All personnel must be pre-approved by the VA, wear visible badges, and comply with data handling restrictions under VA Handbook 6500.6 and FAR clauses prohibiting unauthorized use of sensitive personal information. Invoicing is exclusively through the Tungsten Network, payment will be made via electronic funds transfer, and the contract includes two option clauses providing for extensions up to six months or total contract durations not exceeding five years. No packaging, labeling, or barcoding standards are specified beyond internal equipment identifiers, and no security clearance is required, though contractors are bound by prohibitions on subcontracting with debarred entities and prohibited jurisdictions under OFAC regulations.

250-NETWORK Contract Office 10 (36C250)

POSTED

about 12 hours ago

DEADLINE

FY 26 NPTU Almar Boat RepairThe U.S. Air Force at Joint Base Charleston is preparing to issue a formal request for quotation to repower and repair a single 26-foot Almar Sounder T-Top vessel, with the work focused on replacing legacy propulsion and control systems with dual new outboard engines, modern hydraulic steering, updated electrical wiring, new batteries, and digital instrumentation. All labor, materials, and transportation necessary to complete the work must be provided by the selected vendor, and the contractor's commercial repair facility must be located within a 50-mile highway driving radius of Joint Base Charleston – Naval Weapons Station to minimize transport risks to the government-owned hull and to accommodate mandatory in-person sea trials with USAF personnel. This is a total small business set-aside under NAICS code 811310, indicating the contract is reserved exclusively for small business concerns as defined by the Small Business Administration. The presolicitation notice was posted on July 28, 2026, and provides a draft Performance Work Statement for industry review but does not solicit offers at this time; a formal solicitation will follow. Questions regarding the scope or draft PWS must be submitted in writing to the Contracting Specialist and Contracting Officer no later than August 5, 2026, at 1:00 PM EDT. The anticipated response deadline for the official solicitation is August 12, 2026, and the point of contact for inquiries is Daniel Collins with secondary support from Lt. Aaryn Scires, both reachable via email or phone through the Department of Defense office located at Joint Base Charleston, South Carolina.

FA4418 628 Cons Pk

POSTED

about 12 hours ago

DEADLINE

Notice of Intent to Sole Source - Excitation System Engineering, Field Services, and Order ListThe U.S. Army Corps of Engineers, Detroit District, intends to sole source engineering, onsite field, and Order List services for the Excitation System at a hydropower plant in Chippewa County, Michigan, to ABB, Inc. The work encompasses OEM services including pre-site activities such as updated drawing submissions, schedule finalization, and security documentation, followed by on-site tasks like installing and commissioning five new Excitation Control Terminals, updating firmware, repairing a ground fault relay, removing obsolete wiring, and auditing spare parts inventory. Post-installation deliverables include detailed performance reports for each unit and the supply of all new OEM parts covered under a full standard warranty. This notice is not a solicitation and does not obligate the government to award a contract; it serves solely to assess whether competitive bidding is warranted based on responses from other firms capable of delivering directly compatible equivalent products. Response must be submitted in writing by August 11, 2026, at 2:00 PM EST, and must include the firm’s name, CAGE code, point of contact details, and documentation proving product compatibility. All submissions must be sent to three designated email addresses with the specified subject line, and oral communications will not be considered. The government retains full discretion to determine whether the procurement proceeds as sole source or opens to competition based on the responses received.

W072 Endist Detroit

POSTED

about 12 hours ago

DEADLINE

Clean Agent System RepairsThe US Forest Service Forest Products Laboratory in Madison, Wisconsin is seeking contractors to perform repairs on its Clean Agent System under solicitation number 12444526Q0058, which was posted on July 28, 2026, with responses due by August 5, 2026. This procurement is designated as a Total Small Business Set-Aside under the Small Business Administration guidelines, ensuring that only small businesses are eligible to compete. The work falls under NAICS code 811310, which covers commercial and industrial machinery and equipment repair and maintenance services. The contracting office is listed as CSA East 6 USDA-FS, with its administrative address in Atlanta, Georgia, though all performance must occur at the facility in Madison, Wisconsin. Lawrence Jackson from the US Department of Agriculture serves as the primary point of contact, reachable via email and phone for any inquiries related to the solicitation. The opportunity is publicly accessible through the SAM.gov website for registered vendors.

Csa East 6 Usda-Fs

POSTED

about 12 hours ago

DEADLINE

J045--Preventive Maintenance Services for Catalytic System at the Generator Farm at the VA Caribbean Healthcare SystemThe Department of Veterans Affairs, through the VA Caribbean Healthcare System’s Network Contracting Office 8, plans to establish a sole-source Blanket Purchase Agreement for preventive and corrective maintenance services on the TRIM-NOX SCR catalytic system at the Generator Farm. The contract is authorized under the Revolutionary FAR Overhaul provisions, with the sole vendor identified as A.T.M. Sales or Service Incorporated, the original equipment manufacturer’s exclusive authorized service provider for this system in Puerto Rico. The work falls under NAICS code 811310 with a size standard of $12,500,000 and PCS Code J045, requiring the vendor to supply all personnel, equipment, tools, materials, transportation, supervision, and non-personal services necessary to maintain the catalytic system as outlined in the Performance Work Statement. This is not a competitive solicitation; it is a notice of intent to negotiate a sole-source agreement, and no solicitation package is being issued. Interested parties must submit clear and convincing evidence that open competition would benefit the government, with responses due no later than July 31, 2026, at 10:00 AM Puerto Rico local time to Contracting Officer Baryan Sierra at baryan.sierrapierluissi@va.gov. The posting date is July 28, 2026, and while the official response deadline is listed as July 31, 2026, at 1:00 PM, the requirement specifies the 10:00 AM local time cutoff. The office managing this acquisition is based in Tampa, Florida, but the services are to be performed at the VA Caribbean Healthcare System facility.

248-NETWORK Contract Office 8 (36C248)

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)

Same awarding agency

Mobile Robot Stretch Wrap MachineThe U.S. Department of Veterans Affairs, through the 261-NETWORK Contract Office 21, is conducting market research to identify capable vendors who can provide two mobile robotic stretch wrap machines suitable for industrial warehouse use. The requirement is for machines that autonomously travel around stationary pallets to wrap oversized, irregular, and standard loads with a maximum wrap height of 84 inches and compatibility with 20-inch-wide stretch film rolls. The equipment must be robust, mobile, and designed for frequent, repetitive operation in a typical warehouse environment, with performance equivalent to or better than the Global Industrial Mobile Robot Stretch Wrap Machine. The North American Industry Classification System code for this requirement is 333993, which classifies packaging machinery manufacturing, and the small business size standard is 600 employees or fewer. Vendors are invited to submit information on their products’ technical capabilities, warranty and maintenance support, delivery timelines, and business size classification including any socio-economic designations such as 8(a), HUBZone, SDVOSB, or WOSB. This sources sought notice is not a solicitation and does not obligate the government to award a contract; it is intended solely for acquisition planning and market analysis. Responses are due by August 3, 2026, and should be directed to Jason Olliff at the provided contact information. The intended place of performance is North Las Vegas, Nevada, with the contracting office located in Mather, California. The government will use the vendor responses to refine its requirements, evaluate industry capabilities, and determine the most effective small business acquisition strategy for any future solicitation. No formal contract clauses or procurement documents are included in this notice, and any subsequent RFP, RFQ, or IFB will contain the full terms and conditions.

Packaging Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Cybersecurity & Data Compliance SupportThe contract requires support for cybersecurity and data compliance within a middleware system and associated data flows, ensuring full alignment with Department of Veterans Affairs security policies as well as federal standards including HIPAA, HITECH, and NIST frameworks. A critical component is the execution and management of Business Associate Agreements to safeguard protected health information, along with maintaining audit readiness to demonstrate ongoing compliance through documentation, monitoring, and reporting practices. The work demands deep expertise in healthcare data regulation and secure system integration to meet strict federal requirements for handling sensitive veteran information. Performance is to be carried out at a designated location in Palo Alto, California, with a response deadline of August 10, 2026. The contract is classified as a subcontract under NAICS code 541611, indicating it falls within the management consulting services category, and is solicited by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21. While no set-aside preferences are specified, the nature of the work necessitates specialized technical and compliance capabilities to uphold federal mandates and ensure uninterrupted, secure data operations for VA systems.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

On-Site Technical Support & Field Service for POC DevicesThe contract requires on-site technical support and field service for point-of-care laboratory instruments at VA Palo Alto and its affiliated clinics, with all work performed by manufacturer-certified technicians using only new, authorized parts. Services include installation, calibration, troubleshooting, and repair of POC devices to ensure continuous, reliable operation in clinical environments. The work must adhere to strict quality and compliance standards, prioritizing equipment performance and patient safety through expert-level service delivery. The opportunity is classified as a subcontract under NAICS code 811212, with a response deadline of August 10, 2026, and a posting date of July 27, 2026. Performance is exclusively located in Palo Alto, California, 94304, under the purview of the Department of Veterans Affairs, specifically the 261-NETWORK Contract Office 21. No set-aside provisions are specified, and the contract is managed through the federal procurement system with the provided SAM.gov link for further submission details.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

IT System Maintenance & Software Support ServicesThe contract seeks a subcontractor to provide ongoing maintenance and support services for a middleware platform, ensuring uninterrupted operation and seamless adaptation to evolving hardware and device requirements. Core responsibilities include deploying software patches, performing system upgrades, and implementing necessary modifications to maintain system integrity, performance, and compatibility. The work is structured to support continuous service delivery and technological responsiveness, with a focus on reliability and scalability in a dynamic environment. The contract is titled IT System Maintenance & Software Support Services, issued under the Department of Veterans Affairs through the 261-NETWORK Contract Office 21, with performance located in Palo Alto, California, 94304. It is classified under NAICS code 541512 and categorized as a subcontract, with a response deadline of August 10, 2026, at 9:00 PM ET. The solicitation was posted on July 27, 2026, and all submissions must be completed by the stated deadline to be considered.

Computer Systems Design Services

POSTED

DEADLINE

Middleware Integration & Data Management System DevelopmentThe contract requires the design, deployment, and ongoing maintenance of a secure middleware platform that enables seamless bi-directional data exchange between point-of-care laboratory instruments and the VISTA LIS and CPRS systems used by the Department of Veterans Affairs. This platform must ensure reliable, real-time data flow with zero tolerance for downtime, supporting 24/7 operational Continuity, while adhering to all applicable healthcare data security and compliance standards. The system must be engineered for scalability, fault tolerance, and interoperability to accommodate evolving instrument technologies and clinical workflow demands. The work is to be performed at the Palo Alto location with a 94304 zip code, under a subcontract structure within the NAICS code 518210 for data processing, hosting, and related services. The solicitation was posted on July 27, 2026, with a mandatory response deadline of August 10, 2026, at 9 PM. The contracting office is the 261-NETWORK Contract Office 21 under the Department of Veterans Affairs, and the project is critical to enhancing clinical decision support and workflow efficiency across VA healthcare operations through integrated, secure, and automated laboratory data management.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Generator Parts & Replacement Components SupplyThe contract seeks suppliers to provide OEM or approved aftermarket components for emergency generators and automatic transfer switch systems, encompassing critical parts such as batteries, filters, controllers, and fuel system components. The emphasis is on ensuring reliable, high-quality replacements that meet the operational demands of mission-critical backup power systems. The NAICS code 423690 indicates this is classified under Other Industrial Machinery and Equipment Merchant Wholesalers, pointing to a distribution-focused procurement rather than manufacturing. The opportunity is structured as a subcontract under the Department of Veterans Affairs, specifically managed by the 261-NETWORK Contract Office 21, with performance required at the Mather location. Interested parties must submit responses by August 12, 2026, at 5:00 p.m., following a posting date of July 27, 2026. There is no set-aside designation specified, meaning the contract is open to all qualifying vendors without preferential treatment based on business size or classification. The procurement aims to establish a steady supply chain for essential generator and ATS parts used in VA healthcare and infrastructure operations.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Emergency Generator Repair & Troubleshooting ServicesThe contract seeks qualified service providers to respond to emergency generator failures by conducting diagnostics, performing corrective repairs, and validating system performance after repairs are completed. The work is critical to maintaining operational readiness and falls under NAICS code 811310 for miscellaneous repair and maintenance. This is a subcontract opportunity issued by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21, with performance required at the Mather location. All responses must be submitted by August 12, 2026, at 5:00 p.m. to be considered. The scope emphasizes rapid response, technical expertise in generator systems, and verified post-repair validation to ensure reliability under emergency conditions.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Automatic Transfer Switch (ATS) Inspection & MaintenanceThe contract requires the performance of preventive maintenance, inspection, and operational testing of automatic transfer switches that are integrated with emergency power systems. This work is critical to ensuring the reliability and functionality of backup power infrastructure, particularly in environments where uninterrupted electrical supply is essential. The tasks must be carried out in accordance with established technical standards and operational protocols to maintain system readiness and compliance with safety regulations. The contract is classified as a subcontract under NAICS code 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance. It is issued by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21 and is targeted for performance at the Mather location. The solicitation was posted on July 27, 2026, with a response deadline of August 12, 2026, at 5:00 PM. There is no set-aside designation specified, and no point of contact details are provided in the available information.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Packaging & Labeling ComplianceThe contract requires the design and execution of packaging, marking, and labeling solutions for medical lifts that fully comply with regulatory and safety standards to ensure secure transportation and accurate identification throughout the supply chain. The work must align with industry-specific requirements for medical equipment to prevent damage, misidentification, or non-compliance during transit and handling, with emphasis on durability, clarity, and legal adherence. The deliverables must support the end-user’s operational needs and maintain traceability from manufacturer to point of use. This subcontract is issued by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21 and is performance-based at North Las Vegas, NV, with a zip code of 89086. The opportunity was posted on July 27, 2026, and responses are due by July 30, 2026, at 6:00 PM. The NAICS code 561910 indicates the work falls under miscellaneous support services, suggesting that the contractor must provide specialized logistical and compliance services rather than manufacturing. There is no set-aside designation, meaning all eligible entities may bid, and the contract is intended to secure a service provider capable of delivering turnkey packaging and labeling solutions compliant with federal and medical device standards.

Packaging and Labeling Services

POSTED

DEADLINE

Special Handling & FOB Destination ShippingA subcontract has been issued for the specialized freight logistics required to safely transport eight medical lifts to the VA Southern Nevada Healthcare System in North Las Vegas, Nevada, under FOB destination terms, meaning the seller bears all risks and costs until the equipment arrives at the final delivery point. The contract falls under NAICS code 484220 for specialized freight trucking and is managed by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21. The solicitation was posted on July 27, 2026, with responses due by 6:00 PM on July 30, 2026, indicating a narrow window for qualified carriers to submit proposals. Delivery must meet strict handling requirements to ensure the integrity and functionality of the medical equipment upon arrival, and the performance location is confirmed as North Las Vegas with ZIP code 89086. This effort supports critical healthcare infrastructure by enabling safe installation of lifts essential for patient mobility and care within the VA facility.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Medical Lift Equipment SupplyThe contract involves the supply of eight standing step-through lifts manufactured by IndeeLift, Inc., specifically for use at a Department of Veterans Affairs facility in North Las Vegas, Nevada, with a zip code of 89086. These medical devices must comply with applicable medical device standards to ensure safety and efficacy for veteran patients. The contract is classified as a subcontract under NAICS code 339112, which pertains to medical equipment and supplies manufacturing, and is managed by the 261-NETWORK Contract Office 21. Bidders must submit their proposals by the deadline of July 30, 2026, at 6:00 PM, with the solicitation posted on July 27, 2026. Delivery of all units must be completed to the designated VA facility location, and full adherence to regulatory and performance requirements is mandatory.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Load Bank and Transformer Equipment RentalThe contract requires the supply, delivery, and retrieval of mobile load banks rated at 3000+ amps, transformers, and high-current cabling for temporary use during a 4-hour EPSS test at the VA Medical Center. These systems are critical for verifying the performance and capacity of emergency power systems under simulated full-load conditions, ensuring the facility’s backup power infrastructure meets operational standards. All equipment must be transported to and from the site by the vendor, with responsibility for setup, monitoring during the test window, and safe removal immediately following completion. The solicitation falls under NAICS code 532490 for other commercial and industrial machinery and equipment rental and leasing, and is classified as a subcontract opportunity issued by the Department of Veterans Affairs through the 261-NETWORK Contract Office 21. The posting date is July 27, 2026, with responses due by August 3, 2026, at 5:00 PM. Performance is expected to occur at the VA Medical Center, though specific location details are not provided. Vendors must ensure equipment specifications meet all technical requirements for high-current testing and comply with all safety and logistics protocols for operation within a federally managed healthcare facility.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE