Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from New Hampshire was posted on July 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Environmental Compliance and Hazardous Materials Reporting

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541620
New
International
RFQ - Independent Environmental Monitor Services for Gitga'at Power Project
Solicitation # 235805
The Gitga'at Power Limited Partnership, acting on behalf of the Gitga'at First Nation, is soliciting proposals for Independent Environmental Monitor (IEM) services for the Gitga'at Power Project in British Columbia. The IEM will be retained by the Owner but must maintain strict independence from the Owner, contractor, and designer, reporting directly to the British Columbia Ministry of Water, Land and Resource Stewardship. The scope of work spans several phases, including pre-construction review of environmental plans, field monitoring of in-stream and riparian works during construction, monitoring of first diversion and ramping, and overseeing site restoration and final close-out reporting. Compliance is measured against the Water Sustainability Act, the project's Water Licence, and the Construction Environmental Management Plan. Submissions must be delivered as a single searchable PDF by December 4, 2026, and must not contain any pricing information, as the final agreement terms will be negotiated with the selected respondent. Evaluation is based on a pass/fail check of mandatory requirements—including professional liability, commercial general, and automobile liability insurance, as well as workers' compensation coverage—followed by a scoring process that heavily weights demonstrated success on similar projects. Key personnel must hold professional registrations appropriate for British Columbia. Respondents are required to provide a submission form, project reference form, and a conflict of interest declaration, while ensuring the total proposal does not exceed 20 pages.
Gitga'at First Nation

POSTED

about 5 hours ago

DEADLINE

in 22 days
NAICS: 541620
New
SLED
GNA Thunder Cat Environmental Planning Services-Umpqua NF
Solicitation # S-62900-00018402
The Oregon Department of Forestry is soliciting proposals for Good Neighbor Authority Environmental Planning Services for the Thunder Cat Project on the North Umpqua Ranger District of the Umpqua National Forest. The scope of work includes the completion of a mid-level assessment, supporting activities, a preliminary proposed action, and protocol-level surveys for applicable resources. All work must comply with the National Environmental Policy Act, the 1990 Umpqua National Forest Land and Resource Management Plan, the Northwest Forest Plan, and Section 508 of the Rehabilitation Act of 1973. The contract is expected to terminate upon completion of performance or by June 30, 2027. Proposals are due by December 11, 2026, and will be evaluated based on a combined score of technical approach, management approach, references, key personnel, work samples, and price. Award criteria emphasize technical competence and cost, with a specific focus on the ability to document cultural resource sites while maintaining confidentiality. Contractors must adhere to strict inspection and acceptance standards, where any failure to identify target resources or errors in GIS data may require resurveys at no additional cost to the agency. Mandatory certifications include a policy for preventing sexual harassment and discrimination per ORS 279A.112, and an independent contractor certification. Invoices are submitted monthly to the Federal Forest Restoration Environmental Planning Coordinator.
Department of Forestry

POSTED

about 11 hours ago

DEADLINE

in 29 days

AI Contract Overview

Show more

This subcontract, titled Environmental Compliance and Hazardous Materials Reporting, is issued by the New Hampshire Das Purchasing agency. The primary objective of the agreement is the identification and documentation of mercury and PFAS content within materials, alongside the preparation of Safety Data Sheets to ensure full compliance with NH RSA 277-A. The solicitation was posted on July 29, 2026, with a response deadline set for August 14, 2026. Classified under NAICS code 541620, the contract focuses on specialized environmental consulting and hazardous materials reporting to meet state regulatory standards.

General Info

NH Das Purchasing subcontract for mercury and PFAS reporting to ensure environmental compliance.

Documents

This scope was carved out of 15-27.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PORTABLE CHANGEABLE MESSAGE BOARD SIGN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNew Hampshire → Das Purchasing (statewide Bids & Contracts)
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Identification and documentation of mercury and PFAS content in materials; preparation of Safety Data Sheets (SDS) in compliance with NH RSA 277-A.

More opportunities from New Hampshire → Das Purchasing (statewide Bids & Contracts)

Same awarding agency

NAICS: 561710
New
SLED
HERBICIDE TREATMENT, SERVICE
Solicitation # 3150-27
The New Hampshire Department of Administrative Services is soliciting bids under RFB 3150-27 to establish multiple statewide contracts for herbicide treatment services. This master agreement, intended to run from January 1, 2027, through December 31, 2031, with a possible two-year extension, will utilize a multi-award scenario where contracts are granted by entire county to vendors offering the lowest cost. While this is a framework agreement, specific projects will be awarded via individual agency Requests for Quotes, which will detail the scope of work, treatment areas, and timeframes. Vendors must provide written quotes in response to these requests within two business days. Qualified bidders must demonstrate technical expertise in plant identification, knowledge of herbicide mixes such as Glyphosate and Triclopyr, and experience with the NH Division of Pesticide Control. Evaluation is based on a Bidder Questionnaire covering staff qualifications, equipment capabilities for hard-to-access terrain, and regulatory compliance. Requirements include comprehensive general liability insurance of at least 1 million dollars per occurrence, workers compensation, and adherence to the Worker's Right to Know Act. Bids are due by November 20, 2026, and must include a cost proposal with hourly rates for various treatment methods and geographic locations.
Exterminating and Pest Control Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
SLED
PLOW BLADES, NOSE PIECES, AND SHOES
Solicitation # 39-27
The State of New Hampshire Department of Administrative Services is soliciting bids under solicitation 39-27 for a one-time purchase order contract to supply snow plow carbide blades, nose pieces, and shoes. The required components must be manufactured from new materials and designed to fit existing Frink or Viking truck attachments without modification to ensure full interchangeability. Key deliverables include various sizes of carbide blades, flexible replacement blades, adaptor kits, and wing shoes, with specific material requirements such as ASTM A36 Structural Grade hot rolled flat steel for adapter blades and carbide inserts containing an average of 89 percent tungsten by weight. Bidders must submit a signed transmittal letter, pricing via the provided offer sheet, and a Certificate of Analysis for carbide inserts and rubber molding. Additionally, shop drawings of blade sections must be submitted with the proposal for approval by the NHDOT Bureau of Highway Maintenance prior to the award. The contract will be awarded to the responsible vendor offering the lowest cost for conforming bids, with awards potentially made on an individual item basis. Deliveries must be completed within 30 days of a purchase order to various NHDOT District locations and Turnpikes, with shipments required to be coordinated 48 hours in advance. Strict marking and packaging standards apply, including the use of manufacturer identification stamps, specific blade numbering, and a lead-free rust-resistant lacquer coating that must not cover the carbide edges. Vendors are required to be registered to conduct business in New Hampshire and must provide Material Safety Data Sheets upon delivery in compliance with the Worker's Right to Know Act. Payment is processed via ACH 30 days after the receipt of a valid invoice and acceptance of the goods.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

6 days ago

DEADLINE

in 4 days
View Details
NAICS: 423390
New
SLED
GUARDRAIL AND PARTS
Solicitation # 52-27
Solicitation 52-27 is a Request for Bid issued by the New Hampshire Department of Administrative Services for a one-time order of guardrail and associated parts to support NHDOT operations. The scope of work includes the supply of various components such as W-Beam guardrail sections, steel posts, splice bolts, and complete end terminal units including SoftStop and MSKT systems. All provided equipment must be new, current model year, and compliant with NHDOT General Specifications for All Guard Rail and Parts. The award will be granted to the responsible vendor who submits a conforming bid at the lowest total cost, with the state serving as the sole determining factor for specification compliance. Bids must be submitted by December 2, 2026, and must include a completed offer sheet, vendor contact information, and a signed transmittal letter. Successful vendors must be registered to conduct business in New Hampshire and have a completed Vendor Application Package on file. Deliveries are required to be F.O.B. Destination, specifically to NHDOT District 5 Patrol Shed 511, within 30 days of receiving a purchase order. Delivery requirements specify a preference for flatbed trucks, a 48-hour advance notification for shipments, and a strict prohibition on back orders or split deliveries to maintenance districts. Vendors are also required to provide material safety data sheets upon delivery in accordance with the Worker's Right to Know Act.
Other Construction Material Merchant Wholesalers

POSTED

7 days ago

DEADLINE

in 19 days
View Details
NAICS: 423390
SLED
Erosion Control Materials
Solicitation # 3168-27
The New Hampshire Department of Administrative Services is soliciting bids under solicitation number 3168-27 to establish a statewide contract for the supply and delivery of erosion control materials. The scope of work includes the procurement of various items such as wood grade stakes, sediment rolls, dirtbags, non-woven and filterweave fabrics, bulk bags, erosion blankets, and siltfence. Bidders must provide unit and extended pricing for all listed items on the provided offer sheet to be considered compliant, as failure to bid on all items will result in a non-compliant status. While specific manufacturers are indicated as equivalents, vendors may propose alternative makes and models that match or exceed the required quality. The resulting contract will cover the entire State of New Hampshire, with deliveries made as ordered to specific locations provided on individual purchase orders between 8:00 A.M. and 4:00 P.M. on business days. Vendors are responsible for unloading products at loading docks or receiving platforms and must adhere to industry standards for packaging and palletization. Payment will be processed via ACH or Procurement Card within 30 days of an itemized invoice, with a 0.50 percent discount applicable to orders of 10,000 dollars and above. To be eligible for award, vendors must be registered with the NH Bureau of Purchase and Property and, if applicable, the NH Secretary of State. Required certifications include proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Bids must be submitted via email to the Bureau of Purchase and Property by November 18, 2026, at 1:00 PM Eastern Time.
Other Construction Material Merchant Wholesalers

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 423510
SLED
Reinforcing Bars Straight - Grade 60 AASHTO M31 - Uncoated
Solicitation # 3159-27
Solicitation 3159-27 is a request for bids from the New Hampshire Department of Administrative Services for the supply of straight, uncoated reinforcing bars meeting Grade 60 AASHTO M31 standards. The scope includes various bar sizes from #3 to #9 in 20-foot lengths, with estimated annual quantities ranging from 4,000 to 100,000 lbs per item. The contract is awarded to one or more vendors providing the lowest cost by section, provided they bid on all items within that section. The term begins upon approval by the Governor and Executive Council and runs through January 31, 2032, with a possible two-year extension. Deliveries must be completed within five business days of an order and delivered to state loading docks between 8:00 A.M. and 4:00 P.M. on business days. Vendors are responsible for removing products from the carrier and must adhere to industry standards for packaging and palletization, including the removal of empty pallets on the next scheduled delivery. Required documentation includes detailed delivery tickets and material safety data sheets per RSA 277-A. To be eligible, vendors must provide proof of comprehensive general liability insurance, workers compensation insurance, and a certificate of good standing from the NH Secretary of State. Bids must be submitted via email to [email hidden] by December 2, 2026, at 1:00 P.M. Eastern Time.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

9 days ago

DEADLINE

in 20 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS