F108--657-24-103JC, Conduct Hazardous Material Abatement 2024, JC (VA-24-00008672)

Synopsis: PROJECT TITLE: Conduct Hazardous Material Abatement 2024, Saint Louis VA Medical Center John Cochran Division, Saint Louis, MO. CONTRACT INFORMATION a. This A-E Services requirement is being procured in accordance with the Brooks Act (Public Law (92-582)) and implemented in accordance with the Federal Acquisition Regulation (FAR) Subpart 36. Firms will be selected based on demonstrated competence and qualifications for the required work. b. This procurement is restricted to Service-Disabled Veteran Owned Small Business (SDVOSB) firms. This requirement is being procured in accordance with the VAAR Subpart 836.6 as implemented in FAR Subpart 36.6. c. This is not a Request for Proposal, and an award will not be made with this announcement. This announcement is a request for SF 330 s from qualified contractors that meet the professional requirements. d. The selection criteria for this acquisition will be in accordance with FAR 36.602-1 and are listed below in descending order of importance. The completed SF 330 will be evaluated by the Saint Louis VA Medical Center, John Cochran Division Evaluation Board in accordance with FAR 36.602-5(a) and the selection report shall serve as the final selection list, which will be provided directly to the Contracting Officer. The Government will not pay nor reimburse any costs associated with responding to this request. The Government is under no obligation to award a contract as a result of this announcement. e. Award of any resultant contract is contingent upon the availability of funds. f. No solicitation document is available and no other information pertaining to project scope, etc. is available at this time. Any request for assistance with submission or other procedural matters shall be submitted via email only to contact@example.gov and contact@example.gov. Personal visits to discuss this announcement will not be allowed. g. The NAICS Codes for this procurement is 541330 Engineering Services and small business size standard of $25.5M. Award of a Firm Fixed Price contract is anticipated. The anticipated time for completion of design is approximately 60 calendar days including time for VA reviews. The resulting construction price range is estimated to be between $250,000 and $500,000. h. DATABASE REGISTRATION INFORMATION: VERIFICATION OF STATUS OF APPARENTLY SUCCESSFUL OFFEROR THIS ACQUISITION IS 100% SET-ASIDE FOR QUALIFIED SERVICE-DISABLED VETERAN OWNED SMALL BUSINESS AE FIRMS INCOMPLIANCE WITH VAAR 819.7003. ONLY BUSINESSES VERIFIED AND LISTED IN THE SMALL BUSINESS ADMINISTRATION (SBA) REGISTRY https://veterans.certify.sba.gov, SHALL BE CONSIDERED. SYSTEM FOR AWARD MANAGEMENT (SAM): Federal Acquisition Registrations require that federal contractors register in the System for Award Management (SAM) database at www.sam.gov and enter all mandatory information into the system. Award cannot be made until the contractor has registered. Offerors are encouraged to ensure that they are registered in SAM prior to submitting their qualifications package. j. THE EXCLUDED PARTIES LIST SYSTEM (EPLS): To ensure that the individuals providing services under the contract have not engaged in fraud or abuse regarding Sections 1128 and1128A of the Social Security Act regarding federal health care programs, the contractor is required to check the Excluded Parties List System (EPLS) located at www.sam.gov for each person providing services under this contract. Further the contractor is required to certify that all persons listed in the qualifications package have been compared against the EPLS list and are NOT listed. During the performance of this contract the Contractor is prohibited from using any individual or business listed on the List of Excluded Individuals/Entities. k. E-VERIFY SYSTEM: Companies awarded a contract with the federal government shall be required to enroll in E-Verify within 30 days of the contract award date. They shall also need to begin using the E-Verify system to confirm that all of their new hires and their employees directly working on federal contracts are authorized to legally work in the United States. E-Verify is an Internet-based system that allows an employer, using information reported on an employee's Form I-9, to determine the eligibility of that employee to work in the United States. There is no charge to employers to use E-Verify. (FAR 52.222-54) l. A-E firms are required to respond if interested by submitting one (1) completed Standard Form 330 qualification package Parts I and II to include all consultants (form available on-line at: https://www.gsa.gov/system/files/SF330-21_Part_1.pdf and SF330-21_Part_2.pdf (gsa.gov)). Must include in Part I Section H an organizational chart of the firm (excludes consultants) and a design quality management plan. Submission information incorporated by reference is not allowed. All submissions shall be made electronically. m. Completed package shall be delivered electronically on or before 10/25/2023 at 2:00PM Central Standard Time to the NCO 15 Contracting Office, Attn: Paul Dixon Jr., Contracting Officer @ contact@example.gov and Lucia Cowsert, Contract Specialist @ contact@example.gov. PROJECT INFORMATION The mission of the Veterans Affairs Saint Louis Health Care System (VASTLHCS) is to provide the highest quality health care to our nation s veterans. In order to accomplish this mission, VASTLHCS Facility Engineering Service (FES) intends to partner with an A/E Firm on a project to conduct abatement of Hazardous Material (Asbestos, Lead) at VASTLHCS John Cochran Division Building 1. The SOW includes VPIH for additional sampling, designing an abatement plan, specifications, review and approval of Abatement Work Plan, and abatement oversight. Limited abatement will occur based on findings of the most recent survey (friable materials found, flaking lead-based paint, etc.) and investigations of the VPIH. Areas to be abated are identified and coordinated with In-House Construction Crew work or Maintenance & Operations needed repairs. Abatement could occur at any of the John Cochran Division Buildings depending on priority of upcoming IHCC & M&O work. Provide a proposal to include all labor, materials, equipment and CPIH services to perform the following work items. Project Intent Building 1 Room B021A Remove approximately 50 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room B016 Remove approximately 50 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room B119A Remove approximately 50 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Hallway H118 Remove approximately 50 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Hallway H111 Remove approximately 9 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room A245 Remove approximately 50 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room A342A Remove approximately 50 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room A542 Remove approximately 20 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room A634 Remove approximately 50 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room A653 Remove approximately 30 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room A632 Remove approximately 20 linear feet (LF) of Thermal System Insulation (TSI) from pipes and re-insulate pipes. Building 1 Room S006 Remove approximately 80 square feet (SF) of ACM floor tile and mastic and replace with 12x12 vinyl floor tile and approximately 30 lineal feet of four-inch vinyl cove base, sample of flooring and cove base to be approved by VA Interior Design prior to installation. Building 1 Room A830 Remove approximately 200 square feet (SF) of ACM floor tile and mastic, Demo approximately 200 square feet of acoustic ceiling. Abate ACM in Fan Coil Unit (FCU) located in this room. Demo west wall approximately 16 linear feet, floor to concrete ceiling. Demo north wall, approximately 12 linear feet, floor to concrete ceiling. Leave floor concrete after abatement. Leave project containment between room A830/A831 and Hall in place for VA use. Building 1 Room A831 Remove approximately 280 square feet (SF) of ACM floor tile and mastic, Demo approximately 280 square feet of acoustic ceiling. Abate ACM in Fan Coil Unit (FCU) located in this room. Demo north wall, approximately 19 linear feet, floor to concrete ceiling. Leave floor concrete after abatement. Leave project containment between room A830/A831 and Hall in place for VA use. Building 1 Hallways H807, H808 and H809 Remove approximately 1000 square feet of ACM floor tile and mastic and replace with LVT, sample of flooring to be approved by VA Interior Design prior to installation. Supplement B SCOPE OF WORK: A/E services are required for Schematics, Design Development, Construction Documents, Construction Cost Estimate and Construction Period Services for project number 657-24-103JC Conduct Hazardous Material Abatement 2024, JC. This delivery order shall cover the following tasks. A/E Part Two Services of this design project (also known as Construction Period Services) includes responding to construction contractor Requests For Information (RFIs) during the solicitation and construction phases of the construction project, attendance at pre-bid, post-award and commissioning kick off construction project conferences, review of construction material submittals and shop drawings, approximately 2 site visits during construction to ensure compliance with the design drawings and specifications, preparation of site visit reports, coordination with project commissioning requirements, review of any construction project modifications for cost and technical acceptability, attendance in the final acceptance inspection, preparation of the punch list and preparation of record drawings of the completed construction project based on the construction contractor s as-built drawings. The A/E shall prepare a submittal log to be utilized by the VA during construction period services, maintain RFI log and provide meeting minutes for weekly construction meetings throughout the duration of construction. The A/E shall hire a third-party commissioning agent to commission all installed equipment. The above paragraphs constitute a basic outline of the work to be accomplished and in no way comprises all the details for design of this project. The A/E shall initiate detailed inspection of the project site to determine the needs and conditions for the design of this project. The A/E shall be solely responsible for the management, including all associated labor, equipment, materials, mailing costs, and inspection, to meet the requirements of the design project. The A/E shall further provide meeting minutes for all meetings held under this design project. General Statement A/E Part One Services (also known as Design Phase) for this design project includes site visit, field investigation, conduct of studies and user interviews to update drawings, specifications and cost estimates for all facets of work and disciplines/trades to facilitate a construction project. This project will Conduct Hazardous Material Abatement 2024, JC. 2. DESIGN DEVELOPMENT: The A/E firm shall: a. Meet with Facilities, and other personnel prior to start of design to determine detailed requirements of work involved. b. Work from existing building and site drawings furnished by the VA to develop project design. (These are to be used only as guidelines); c. Perform any necessary on-site field investigations to accomplish work and to verify drawings provided by the VA; d. Prepare rough sketches, if necessary, to solve possible problems in design throughout the contract; and e. Follow VA Program Guide PG-08-15 Volume C, and other applicable guidelines to design the project. EVALUATION FACTORS: Selection Criteria are in accordance with Federal Acquisition Regulation (FAR) Part 36.602-5. Prospective firms are required to address all selection criteria within submitted SF330 packages using additional pages as necessary. SF 330 submissions including any additional pages are not to exceed fifty (50) pages. Each page cannot exceed 81/2 x 11 in size. Qualifications (SF330) submitted by each firm for PROJECT NUMBER: 657-24-103JC Conduct Hazardous Material Abatement 2024, JC, VA Medical Center Saint Louis, John Cochran Division will be reviewed and evaluated based on the following evaluation criteria listed below in descending order of importance: 1. PROFESSIONAL QUALIFICATIONS. The qualifications of the individuals which will be used for these services will be examined for experience and education and their record of working together as a team. A&E firms shall have licensed professional architects and engineers currently registered in the state of Missouri or in a state of which Missouri has recognized the engineering license. The specific disciplines which will be evaluated are Architects, Civil Engineer, Mechanical Engineers, Electrical Engineers, Structural Engineers, Industrial Hygienists, Estimators, CAD operators, Project Managers, LEED Consultant, Fire Protection Engineer, and Interior Designer. 2. SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE. Provide detailed project information on any projects (that are complete - design and construction) the proposed team has worked together on in the last five (5) years. Special emphasis will be given to any medical facility related projects. If the entire team has not worked together previously, provide detailed project information that each of the team members have worked on in the last three (3) years with special emphasis on medical facility projects. The project information should include project titles, a short scope of work, date of design completion, date of construction completion, firms involved, etc. The A/E shall also describe if they have any experience completing a design that was started by another A/E firm. Provide the project title, scope of work, date of design start for this team, percentage of design when accepted by team and completion of design. 3. CAPACITY TO ACCOMPLISH THE WORK. The general workload and staffing capacity of the design offices which will be responsible for the majority of the design and the ability to accomplish the work in the required time will be evaluated. In accordance with VAAR 852.219-10(c)(1), prime contractors shall clearly demonstrate how they will meet the requirement that at least 50 percent of the design work be accomplished by employees of the concern or employees of eligible service-disabled veteran owned small business subcontractor/consultant. 4. PAST PERFORMANCE. NCO 15 will evaluate past performance on recent and relevant contracts with Government agencies (emphasis on VA work) and private industry in terms of construction cost estimating, cost control, quality of work, compliance with performance schedules and a record of significant claims against the firm due to improper or incomplete engineering services (references required). Project past performances that are older than 3 years will receive a lesser score than those references for projects accomplished within the past 3 years. 5. LOCATION OF DESIGN FIRM. The geographic proximity of each firm to the location of the VA Medical Center will be evaluated. The medical center is located at Saint Louis, VA Medical Center, Saint Louis Missouri 63106. 6. CLAIMS AND TERMINATIONS. Provide documentation of significant claims against the firm or terminated contracts because of improper or incomplete architectural and engineering services. Provide a detailed narrative of relevant projects within the last 5 years that have claims against the organization or have been terminated by the owner. Include the circumstances, cost, and schedule impacts to involved parties, and outcomes of the claims and/or terminations. They will be examined.